Problem in calling transaction on Portal through ITS

Dear All,
We are facing a problem in calling R/3 transaction through ITS on EP 6.0 , It is successfuly coming on the internet explorer 7.0 but on mozilla firefox, it is showing SAP GUI screen only. Plz suggest what we have to do. It is necessary to us to use this on Mozilla or other explorer like safari as our some user are using MAC OS.
Ankit Gupta

Ankit,
You would have to verify your portal version and the browsers supported via the PAM.
Access this link using the service marker place id and password.
https://websmp202.sap-ag.de/pam
http://service.sap.com/pam
Cheers!
Sandeep Tudumu

Similar Messages

Problem in accessing the standard transaction from Portal through RFC

Below is the error we are getting when we run RFC (which has P60) from the portal(JAVA webdynpro) which inturn uses BDC to get the spool id from the standard p60(RPCEOYG0)..
Msgid "00"
Msgno "359"
Msgtx "The transaction was terminated by the user".
But if i keep the debugger inside the RFC after the call_transaction and if I press F8 then I am getting the correct output. Could some one tell me the reason behind this ?
thanks,
Prashanth J R

Hi,
It sounds to me like the BDC or some other component being called from your Z function module requires some sort of dialog interface (maybe an "Are you sure?" type message).
When calling RFC from Web Dynpro, you should ensure that at no point in the call stack does it try to perform any dialog functions (messages, pop-up box, display screens).
You mention that you BDC does a CALL TRANSACTION at some point, you should ensure that this isn't executed when you are calling by RFC from a Web Dynpro.
Your Z function module should be able to execute from start to finish, returning the results without any dialog interaction.
I might be wrong, but it sounds similar to a problem we had a few years ago where someone had coded an "Are you sure?" message into a function module that was called from a stadard R/3 dialog screen as well as Web Dynpro in the Portal, and it broke the portal based stuff.
Cheers,
Chris

Problem with Call transaction method in function module

Dear Frndz,
           I am converting its services into webdynpro.
           I developed a rfc[function module] for travel management [TRIP] . In that rfc i used call transaction method[BDC] to upload the data. The same rfc will be called from the frontend[portal].It is working fine in development for whome se37 execution authorization was assigned. It is not working for other users. I hope it is something relevant to authorization .If suppose can i create a authorization object for this rfc and assign it to the profile.
        Normally users can be given authorization to run the tcode.
similarly i want to give the authorization to be given users to execuste this funtion module.
huv can i do it ?? any suggestion.
Rgds.
siva

Use ST01 transaction to start authorization trace, you will then see what authorizations are missing (if your assumption is right of course, i.e. if it's really an authorization problem)

Call transaction in Portal using if_wd_portal_integrati- navigate_absolute

Hi Guys,
              I am calling a transaction in portal using the following code.
CALL METHOD l_portal_manager->navigate_absolute
    EXPORTING
      navigation_target   = 'pcd:portal_content/com.csa.Prototype/com.csiro.Page/SAPWebGUI/sap_transaction_html_gui'
      navigation_mode     = if_wd_portal_integration=>co_show_external
      WINDOW_FEATURES     = 'TOOLBAR=FALSE,LOCATION=FALSE,RESIZABLE'
      business_parameters = bparams
      launcher_parameters = lparams.
But when I test in portal, its pop up a page and shows message No Page Found.
Any idea what should be done.
Thanks
Senthil

Hi Lekha,
               Here is the existing code
l_api_component = wd_comp_controller->wd_get_api( ).
l_portal_manager = l_api_component->get_portal_manager( ).
MOVE 'OkCode' TO param-key.
MOVE '/00' TO param-value.
APPEND param TO lparams.
MOVE 'TCode' TO param-key.
MOVE 'MRBR' TO param-value.
APPEND param TO lparams.
MOVE 'SO_BELNR-LOW' TO param-key.
MOVE stru_invoice-belnr TO param-value.
APPEND param TO bparams.
MOVE 'SO_GJAHR-LOW' TO param-key.
MOVE stru_invoice-gjahr TO param-value.
APPEND param TO bparams.
CALL METHOD l_portal_manager->navigate_absolute
    EXPORTING
     navigation_target   = 'pcd:portal_content/com.csiro.Prototype/com.csi.Page/SAPWebGUI/sap_transaction_html_gui'
      navigation_target   = 'ROLES://portal_content/com.csiro.Prototype/com.csi.Page/SAPWebGUI/sap_transaction_html_gui'
      navigation_mode     = if_wd_portal_integration=>co_show_external
      WINDOW_FEATURES     = 'TOOLBAR=FALSE,LOCATION=FALSE,RESIZABLE'
      business_parameters = bparams
      launcher_parameters = lparams.
Here they trying to call sap_transaction_html_guilink and giving tcode as a parameter.
Does it work ?
Thanks
Senthil

Problem with call transaction and a query

Hi,
Whe have a query that has its own Z tcode, we are working with this "EXIT_SAPLCORF_103" within the tcode CO11N. Inside the include "ZXCOFU13" we call the query Tcode and it is displayed on screen but with no data.
The table "itbdcdata" record well the data of the inputs in the query recording so you can see with the WERKS and the number of reserve (3994) in the recording.
Why the call transaction display the query screen with no data...? and how can i pass the inputs to the query screen so it be executed.
Thanks on advance.
David Fúnez
Tegucigalpa, Honduras.
This is the recording:
AQZZZ_USER_GRMA=Z_QUERY_PP_003     1000X                                                                                BDC_CURSOR     SP$00002-LOW
                                                            BDC_OKCODE     =CRET
                                                            S_WERKS-LOW     1202
                                                            SP$00002-LOW           3994
                                                            %ALV     X
this is the code in the INCLUDE
*& Include           ZXCOFU13
DATA: itbdcdata TYPE bdcdata    OCCURS 0 WITH HEADER LINE,
      optoption TYPE ctu_params.
REFRESH itbdcdata.
CLEAR   itbdcdata.
itbdcdata-program = 'AQZZZ_USER_GRMA=Z_QUERY_PP_003'.
itbdcdata-dynpro   = '1000'.
itbdcdata-dynbegin = 'X'.
APPEND itbdcdata.
itbdcdata-fnam = 'BDC_CURSOR'.
itbdcdata-fval = 'SP$00002-LOW'.
APPEND itbdcdata.
itbdcdata-fnam = 'BDC_OKCODE'.
itbdcdata-fval = '=CRET'.
APPEND itbdcdata.
itbdcdata-fnam = 'S_WERKS-LOW'.
itbdcdata-fval = '1202'.
APPEND itbdcdata.
itbdcdata-fnam = 'SP$00002-LOW'.
itbdcdata-fval = caufvd_imp-rsnum.
APPEND itbdcdata.
itbdcdata-fnam = '%ALV'.
itbdcdata-fval = 'X'.
APPEND itbdcdata.
CLEAR optoption.
optoption-dismode = 'A'. "A is visible
optoption-updmode = 'S'.
CALL TRANSACTION 'ZRESV' USING itbdcdata OPTIONS FROM optoption.

problem solved.

Problem with "Call Transaction" which calls a view cluster

Hi Colleagues ,
I have a rare issue with the call transaction , here is the use case for it :
1> I call a transaction(calls a screen X) in a report ,
2> I have a button in the screen , which calls another transaction(calls a screen X2) .
3> On the screen X2 i have another button which calls transaction (calls the view cluster ).
problem :
i'm not able to see the navigation pane in the view cluster on the left. its missing .
but when the view cluster is called direclty , i'm able to see the navigation pane in the view cluster ..
My initial doubt was , is this the problem with nesting of 'Call Transaction' calls ????
please answer the thread , i have to fix this ASAP.
regards,
Dilip

problem solved.

Problem with CALL TRANSACTION 'VA33' with PARAMETER ID 'AUN'

I started to post this as a problem, but stumbled into the solution while testing further. Since I didn't find a solution in the SDN.SAP Forums I'm entering this to help others who may have the same problem.
This code would not work:
      SET PARAMETER ID 'AUN' FIELD sy-lisel(10).   "sy-lisel(10) contains the Scheduling Agreement on the selected line of the report.
      CALL TRANSACTION 'VA33' AND SKIP FIRST SCREEN.
It would go to Transaction VA33 but would always default to the last Scheduling Agreement accessed manually instead of the one I needed to see via this call.
When I change the transaction to VA03 it works:
      SET PARAMETER ID 'AUN' FIELD sy-lisel(10).
      CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
We can not access a Scheduling Agreement from VA03 on-line, but for some reason this call displays the correct S/A, and System Status says it is running transactin VA03.
Perhaps it is because we are using a custome Order Type for Scheduling Agreements (YALZ)?
Best wishes to our SAP friends.

Hi,
VA33 is for schedulinng Agreement so use..
SET PARAMETER ID 'LPN' FIELD sy-lisel(10).
AUN - Order number
LPN - Scheduling agreement number
now it works..
Regards,
Sathish Reddy.

Problem with Call Transaction

hello,
i am doing call transaction to ME41 in mode 'A' (visible). The problem is when it go to screen SAPLMLSP 0200, in this screen stop call transaction, no error, no okcode, no data,..why?
thanks,
regards,

Hi,
Please check your BDC Program. i think you are not done the recording for that screen. Pleae do the recording one more time and check the program.
Thanks,
Venkat

Problem with CALL Transaction syntax

Hi All,
I have created a report in which Im displaying Sales order, planned order n production order details.
In the output if the user double clicks, anyone of the sales order/planned order/production order no, it has to take to concern transaction.
Sales order and planned order are perfectly working.
problem is with production order, it is not displaying, the exact order no.
my code:
WHEN '&IC1'.
      IF rs_selfield-fieldname = 'VBELN'.
     READ TABLE gt_final_so INTO wa_final_so INDEX rs_selfield-tabindex
        SET PARAMETER ID 'AUN' FIELD wa_final_so-vbeln.
        CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
      ELSEIF rs_selfield-fieldname = 'PLNUM'.
     READ TABLE gt_final_so INTO wa_final_so INDEX rs_selfield-tabindex.
        SET PARAMETER ID 'PAF' FIELD wa_final_so-plnum.
        CALL TRANSACTION 'MD13' AND SKIP FIRST SCREEN.
      ELSEIF rs_selfield-fieldname = 'AUFNR'.
     READ TABLE gt_final_so INTO wa_final_so INDEX rs_selfield-tabindex.
        SET PARAMETER ID 'ANR' FIELD wa_final_so-aufnr.
        CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
In debugging I checked, after call transaction, the system executing the following code, here CAUFVD-AUFNR is initial.
So, it has been picking some different no.
      Starten Batchrezept über Einsatzplanung - DO-THANH
MODULE GET_PARAMETER OUTPUT.
    IF CAUFVD-AUFNR IS INITIAL.
      GET PARAMETER ID 'BR1' FIELD *CAUFVD-AUFNR.
      IF NOT *CAUFVD-AUFNR IS INITIAL.
        CAUFVD-AUFNR = *CAUFVD-AUFNR.
      ENDIF.
    ENDIF.
ENDMODULE.                             " GET_PARAMETER OUTPUT
Pls help me how to resolve the above problem.
Valuable suggesstion will be highly appreciated.
regards,
Priya

Hi,
Note that the code as different Parameter id
you are setting the parameter 'ANR'
SET PARAMETER ID 'ANR' FIELD wa_final_so-aufnr.
Where as in that method it is reading the parameter id 'BR1'
GET PARAMETER ID 'BR1' FIELD *CAUFVD-AUFNR.
so try by setting the 'BR1' in set parameter.
ELSEIF rs_selfield-fieldname = 'AUFNR'.
     READ TABLE gt_final_so INTO wa_final_so INDEX rs_selfield-tabindex.
        SET PARAMETER ID 'BR1' FIELD wa_final_so-aufnr.
        CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
Regards,
Kiruba.

Problem with Call Transaction opt-RACOMMIT = 'X'.

Hello Experts
I am having a problem with call transction. I am calling a Z transaction in function module. Within the Z transaction I am furhter calling some function modules and doing commit work and then some more processing after the comit work inside So to make sure the code after comit work is fired I am using opt-RACOMMIT = 'X' in call transaction. Whenever I set this parameter opt-RACOMMIT = 'X' call transaction fails and gives error saying No batch Input data for screen XXXX. However the Z tcode processed succesfully.
By changing the Mode to E i found that it remians at the last screen of call transction after executing the Z transaction and never comes back
But if I donot use RACOMMIT = 'X' everything is fine. Please let me know if anyone came across such problem. Any help will be apreciated.
Thanks,
kamal

Hello,
as you said, if there is more than commit statement in your ztransaction, then you should put RACOMMIT to 'X'.
I think the problem is in your bdcdata: change it to be sure to get back to the 1st screen of your ztransaction. Then, at this point (1st screen) hit "back" button.
Cordialement,
Chaouki

Commit work statement creating problem in CALL TRANSACTION

Hi Friends,
we are facing a problem where we need to call a standard program from a Zprogram.
we have tried the following ways.
1. Using SUBMIT statement , we are sending the parameters to the standard program, but when the standard program gives a
    dump our program cannot process further records. we are calling the submit statment in a loop. As because the standard
    program is giving dump our program is not able to process the next record in the loop and this should not be the case.
    To avoid this we have used the second method.
2. we used a CALL transaction, we have created a Tcode for the standard program and called this transaction in the calling
    program. We are passing the parameters for the standard program via BDC table. this works fine even when the standard
    program gives a dump but when ever the control   comes across a Commit work statement the the control comes back to our
   calling program with out executing the rest of the   statments after the commit.
now our concern is even though there is an commit work statement , statements after the commit work should also get executed in call transaction. Is thee any way?
Regards,
Sravan

Hi All,
I got the solution
DATA: ctu_parameters TYPE ctu_params.
ctu_parameters-dismode = 'E'.
ctu_parameters-updmode = 'A'.
ctu_parameters-racommit = 'X'. "No abortion by COMMIT WORK
CALL TRANSACTION USING itab_bdcdata OPTIONS FROM ctu_parameters.
the above code will work even if there is an commit work . This might help some others.

Hi Problem in call transaction program of FB60

Hi Techies,
in my call transaction program for FB60 compnay code is defaulted in the initial screen.Every time i need to post different records with the different company codes.
when i record the company code change in FB60 through SHDB once i chnage the company code it is coming out of the recording.
pls let me know how can i continue FB60 transaction once i change the company code for further processing.
and let me know and logic to handle the compnay code when it is defaulted in FB60.
Thanks in advance
Krishna D

Hi,
Try this code and cross check with urs.
CASE SY-UCOMM.
    WHEN '&BATCH'.             "Batch Field
      PERFORM F1000_BDC_MM03 USING LV_MATNR LV_WERKS.
endcase.
FORM F1000_BDC_MM03 USING    P_LV_MATNR
                             P_LV_WERKS.
PERFORM BDC_DYNPRO      USING 'SAPLMGMM' '4110'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                '=GESV'.
CALL TRANSACTION C_TRANSACTION_CALL_MM03 USING I_BDCDATA MODE 'E'
MESSAGES INTO I_MESSTAB.
ENDFORM.                    " f1000_bdc_mm03
&----&      Form bdc_dynpro
&---- Appending the BDC dynpros to internal table BDCDATA
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR W_BDCDATA.
W_BDCDATA-PROGRAM = PROGRAM.
W_BDCDATA-DYNPRO   = DYNPRO.
W_BDCDATA-DYNBEGIN = 'X'.
APPEND W_BDCDATA TO I_BDCDATA.
ENDFORM.
DATA: I_BDCDATA TYPE STANDARD TABLE OF BDCDATA,
Internal table to hold BDC messages
       I_MESSTAB TYPE STANDARD TABLE OF BDCMSGCOLL.
&----&      Form bdc_field
    Appending the BDC FIELDS to internal table BDCDATA
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR W_BDCDATA.
    W_BDCDATA-FNAM = FNAM.
    W_BDCDATA-FVAL = FVAL.
    APPEND W_BDCDATA TO I_BDCDATA.
ENDIF.
ENDFORM.
Tahnks & Regards,
Judith

Problem in call transaction using FD33 t code

Hi all i'm developing a report in that in that i'm calling a tcode FD33.
I want to skip the initial screen.For that i need to pass Customer , Credit control area and status from my program to that tcode.
But my problem is that how to pass the value to check box.
i.m writing the following code
   "Set parameter ID for transaction screen field
        SET PARAMETER ID 'KUN' FIELD W_ALV-KUNNR.
        SET PARAMETER ID 'KKB' FIELD W_ALV-VKORG.
       "Execute transaction FD33, and skip initial data entry screen
        CALL TRANSACTION 'FD33' AND SKIP FIRST SCREEN.
So how to set the value of the STATUS check box.
thanks in advanced.
Dheeraj

use:
data: dynnr(40) value '/210'.    "or number of another dynpro you wish to go
SET PARAMETER ID 'CDY' FIELD dynnr.
A.

A problem with initiating a BPEL process through its web service interface

hi,
i am trying to initiate the helloWorld BPEL process through its web service interface. i use a proxy class that i wrote and i use it from J#.net.
this is the relevant code part:
hello.HelloWorldBinding wsProxy = new hello.HelloWorldBinding();
wsProxy.initiate("Hello");
and the server shows the following message:
ORABPEL-05002
Message handle error.
An exception occurred while attempting to process the message "com.collaxa.cube.
engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: Cannot
decode properties.
The process domain was unable to decode the properties for message guid 10, whic
h are stored in column String index out of range: 3094; the exception reported i
s: {2}.
sql statement: SELECT conv_id, message_guid, domain_ref, process_id, revision_ta
g, operation_name, receive_date, state, priority, properties FROM invoke_message
WHERE message_guid = ?
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
hHelper.java:152)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseSche
duledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java
:86)
at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDriven
BeanInvocation.java:123)
at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome
.java:755)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:
928)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
sableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
<2006-05-10 21:21:15,171> <ERROR> <default.collaxa.cube.engine.data> <BaseDeliveryPersistenceAdaptor::loadInvokeMetaDa
java.lang.StringIndexOutOfBoundsException: String index out of range: 3094
at java.lang.String.substring(String.java:1441)
at com.collaxa.common.util.LVDecoder.decodeElement(LVDecoder.java:152)
at com.collaxa.common.util.LVDecoder.decodeToMap(LVDecoder.java:45)
at com.collaxa.cube.engine.adaptors.common.BaseDeliveryPersistenceAdaptor.loadInvokeMetaData(BaseDeliveryPersi
r.java:2186)
at com.collaxa.cube.engine.adaptors.common.BaseDeliveryPersistenceAdaptor.__loadInvoke(BaseDeliveryPersistence
:2112)
at com.collaxa.cube.engine.adaptors.common.BaseDeliveryPersistenceAdaptor.loadInvoke(BaseDeliveryPersistenceAd
079)
at com.collaxa.cube.engine.data.DeliveryPersistenceMgr.loadInvoke(DeliveryPersistenceMgr.java:357)
at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:465)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:335)
at ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.handleInvoke(ICubeDeliveryLocalBean_StatelessSessionBe
java:1796)
at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHa
7)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
what is the problem? how come i can't initiate the process?
i will be happy if i could get help..
thanks in advance

can you initate the process from the bpel console successfully?
if so can you use obtunnel from the installation to trace the soap message (that goes over the wire), my best guess in this case is a problem with a header (holding the wsa information) ..
after starting obtunnel it will liesten to a custom port, and will forward the request to the engine, so you need to point your client to this new port..
hth clemens

LT04 problems with call transaction

Hello,
I am using RF and creating screens for users to putaway material in a raw material warehouse based on a material document number from the GRN which is linked to a TR (transfer requirement). I am, however, having problems with the TO creation where the material is QM relevant.
I have used function module L_TO_CREATE_TR which works for non-QM relevant items but most of our items are QM relevant. I am trying to process these by creating a TO using LT04 as a call transaction.
However, before I can put in a bin , the screen that appears in order to enter the bin has an error message before anything has been input - 'No destination storage bin to be found in storage type 001 "(L3 009).
Anyone have any suggestions how I can get around this as I cannot create the TO in the background using LT04 because of this error.
Regards
Larissa Maryniuk

As mentioned in my original question, I cannot use the LTOCREATE_FROM_TR FM for items set with stock category Q as these are QM relevant. If you try and create a TO from a TR using L_TO_CREATE_TR you get an error of 2 which is item is QM relevant. I cannot see how I can use WS_LM_TRANSFER_ORDER_CREATE as you cannot put in the TR number anywhere. Other than these 2 cannot see how I can create a TO from a TR without using LT04.
If I use LT04 and set as backrground I get the message specified. The way to get around the error using LT04 is only available if T04 is set as Foreground on the front screen instead of background.
Anyone have any suggestions?
Edited by: Larissa Maryniuk on Jan 25, 2010 11:41 AM

Problem in calling transaction on Portal through ITS

Similar Messages

Maybe you are looking for