Problem in Camera Raw 9.0 after Photoshop CC 2014 update

Hi, after I install the new update to Phostoshop CC 2014, I can't see the picture when I open a RAW file in Camera Raw 9.0. It only shows a big blue box. Can someone please help me?

Quick fix I found on another thread by fredforward until Adobe can fix the problem. Disable Graphic Processor for Camera Raw worked!
Go to "Edit" menu, "Preferences", "Camera Raw"
Disable "Use Graphic Processor" under "Performance" at the bottom.

Similar Messages

Problems with Camera Raw 6.7 after upgrading to OS 10.8

I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open. Does anyone know of a solution or work-around for this problem?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

After Photoshop CC 2014 update - Photoshop is very slow (Windows 7)

After updating today to the latest photoshop cc2014 Version, Photoshop starts very slow and is not useable.
I updated from V. 2014.1.0 to 2014.2.1 20141014.r.257.
Starting Photoshop Needs 6 minutes (before 1.5 minutes). The menue and button reactiontime is more than slow, you cant work with this Setup.
Is there a Problem with the new release?
And please Adobe, dont tell me, my System has a problem. Did only an update on the CC2014 Suite via creative cloud. Old PS Version (2014.1.0)runs great.
After testing a few time, I recovered my System back to Version 2014.1.0 with Windows recovery and Photoshop works good again.
So whats wrong with the new release?
My PC config:
Adobe Photoshop Version: 2014.2.1 20141014.r.257 2014/10/14:23:59:59 CL 987299 x64
Windows 7 64-Bit
Version: 6.1 Service Pack 1
Intel CPU-Familie:6, Modell:10, Stepping:5mit MMX, SSE (ganze Zahl), SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, Hyper-Threading
Physischer Prozessor: 8
Logischer Prozessor: 16
Prozessor-Taktfrequenz: 2664 MHz
Memory: 20463 MB
Thanks for any tipp!
BR.
Werner

The CC 2014 update 2014.2.1 is a month old and ACR 8.7 is two days old. Something strange is happening to you. First try resetting your Photoshop Preferences. This is a Adobe Photoshop User forum your not dealing with Adobe here. You seem to think you are and your attitude seems like you not open to to possibility that your system may have a problem. I think you may have one..
Adobe CC 2014 Product Updates/Downloads for Windows
Photoshop CC 2014
File Download
Size
Date
Notes
Adobe Photoshop 2014.2.1 Update for CC 2014 (64-bit)
249 MB
10/20/2014
Release 15.2.1
Adobe Photoshop 2014.2.1 Update for CC 2014 (32-bit)
223 MB
10/20/2014
Adobe Photoshop 2014.2.0 Update for CC 2014 (64-bit)
249 MB
10/6/2014
Release 15.2
Adobe Photoshop 2014.2.0 Update for CC 2014 (32-bit)
223 MB
10/6/2014
Adobe Photoshop 2014.1.0 Update for CC 2014 (64-bit)
236 MB
8/5/2014
Release 15.1
Adobe Photoshop 2014.1.0 Update for CC 2014 (32-bit)
210 MB
8/5/2014
Adobe Camera Raw – ACR
Adobe Camera Raw 8.7 Update for CC
122 MB
11/18/2014
Release 8.7
Adobe Camera Raw 8.6 Update for CC
106 MB
7/28/2014
Release 8.6
Adobe Camera Raw 8.5 Update for CC
100 MB
6/18/2014
Release 8.5

Problem reading camera raw files after I reinstalled LR4.

Now can't read Nikon 5200 camera raw (nef) files in Develop Mode. Could do so before. Any suggestions?

Thank you all!!!! I was successful in updating!!!!! Appreciate your assistance!
Date: Sun, 3 Nov 2013 06:35:19 -0800
From: [email protected]
To: [email protected]
Subject: Problem reading camera raw files after I reinstalled LR4.
    Re: Problem reading camera raw files after I reinstalled LR4.
    created by JimHess in Photoshop Lightroom - View the full discussion
The file that you downloaded is a self-contained running application that installs the update on your computer. After you download that file, you need to double-click on it and follow the prompts to install it. After it has completed you will have Lightroom 4.4 installed and it will be ready to run. If you are on a Windows computer, the installation will replace your 4.1 installation. If you are on a Mac then you will have both versions installed and you will have to be sure you start the right one.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5810683#5810683
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5810683#5810683
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5810683#5810683. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Lightroom at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Photoshop CC does not open a RAW NEF file with Camera Raw 8.5. Also, my Help Update gives me an old version.

I've tried updating the plug-in using PS Help CC but it updates with an old version. I downloaded 8.5 and did a manual install but Photoshop doesn't recognize it and the plug-in "cannot be found." I can see the plug-in on the HD drive where it was supposed to go. What am I missing here?

Try this if you are experiencing problems.: Camera Raw plug-in installer
Gene

File Naming Problem in Camera Raw 5.4

Am having a problem when processing Raw images in CS4 using Camera Raw 5.4
After processing the image I click 'Save Image'.
In the 'Save Options' box, under 'File Naming' I enter what I want to call the saved image.
Eg. 'Hooded Top' becomes 'Hooded Top.jpg'
The file is then saved onto the Desktop.
Camera Raw seems to be 'stuck' on a previous file name. It will add the same previous file name to the end of the new image.
You can see in the image that the text to the right of 'Example' also seems to be stuck between two lines of text.
If I want to call an image 'Hooded Top' it will add an old name
Eg. 'Hooded Top' will become 'Hooded TopTrack Pants.jpg' (Track Pants being the previous image name)
I have been using CS4 trial for a month with no problems. I have just upgraded to CS4 from CS3 today. The program was working fine all morning.
I have re-installed CS4 and restarted my Mac Pro (OSX 10.5.8). I am using a Canon EOS 5D Mk2.
Any thoughts appreciated.

Look in Task Manager.
One or both of them may be running under Processes.
Use End Process.
My advice is not to use the automatic startup for Bridge.

How to Update Camera Raw 5.0 to Camera Raw 5.6 for Photoshop CS4

How to Update Camera Raw 5.o to Camera Raw 5.6 for Photoshop CS4?
I can access the the download button but after I depress it
I need specific step by step instructions from start to finish
Morty
[email protected]

It would help us if you told us what operating system and version you are using.
generic instructions
Windows
1. Right click on the downloaded Camera_Raw_5_7_updater.zip
    Click on Extract All
2. In the Extract All dialog check Show extracted files when complete, then click on Extract
3. When the next window opens showing the extracted files, right click on the Setup.exe and click on Run as Administrator.
   In the User Account Control dialog click Yes
Just follow the directions in the install dialog when it opens
Mac
1. Double click on the downloaded Camera_Raw_5_updater.dmg to mount the dmg image
2. When the next window opens, double click on the Setup.app
    In the next window enter your password
Just follow the instructions in the install dialog that appears
I didn't take screenshots of the installer dialogs, because i already have the 5.7 camera raw plugin installed

PSE 10 from Apple Store problem with camera raw 6.7 upgrade

PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I lose changes in the details when i open my photos from camera raw 7.0 to photoshop cs5, why?

I lose changes that I made with the tools in the "Details" section, just right after I open my photos from camera raw 7.0 to photoshop cs5, why? The changes that I made with the tools in the "Basic" section remain.

First, how and why are you using Camera Raw 7.0 with CS5?
ACR 7.x requires CS6 to run.
Even if that's a typo in your post and you are running CS6 instead of CS5, no one should be running ACR 7.0, but ACR 8.4 —or at the very least 7.4.
Once any given camera model is supported by a version of ACR, it will continue to be supported in all subsequent versions of ACR. Each update to ACR has unannounced, unheralded bug fixes and improvements. Running 7.0 at this point is sheer madness.
Please clarify.
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Update of Camera Raw 7.2 for Photoshop CS6 and Lightroom 4.2 - now Bad color

Did the auto update of Camera Raw 7.2 to Photoshop CS6 and Lightroom 4.2 now the color is green and flat in all images after I save them. I do use a Nikon Camera profile and lens correction. Everything was working fine until the 7.2 update. Now the only way to save correctly is to Save for Web. Where do I match the color/profiles?
Mig

Color Settings are :     RGB     sRGB IEC61966-2.1
                                   CMYK     U.S.Web Cooated (SWOP) v2
Color Management:     All say preserve embedded profile
I had marked the Profile mismatch boxes to see if I got an error message, but I never did, so I cleared them again.
Conversion Options:     Engine     Adobe
                                            Intent     Relative Colorimetric
Advanced Control     Only one checked iis Blend Text Colors using Gamma at 1.45
As far as what settings do I open images with. File > Open and find the file. During the edit process everything looks perfect - only after I save is the file trashed.
Under Preferences: File Handling > File Compatibilty > checked are Prefer Adobe Camera Raw for Supportred files
Everything has been fine for months with PS CS6 & Lightroom 4.2 & Colorchecker software profiles, until the Raw Camera update. And I can still save perfect images as long as I save they with the File > Save for Web.

How do you Re-Open the Camera Raw Dialog box after closing it?

Hi All,
going crazy trying to figure out how to reopen the Camera Raw dialog box after closing it in photoshop. I know I found it once but have since forgetten. Any help would be much appreciated!
thx!
Jayson

When the image is open in ACR hold down the SHIFT key and you'll see the button marked Open Image changes to Open Object, so do your ACR adjustments then hold down shift and click Open Object - your image will open as a Smart Object in Photoshop.
If using Lightroom you can right click the image and select Edit>Open as Smart Object in Photoshop from the drop-down menu.
Do not confuse normal smart objects with what we're talking about here, Camera RAW Smart Objects - possibly one of the most powerful tools to have at your dispossal, once you understand them.
Hope this helps

When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG

When using Camera RAW after editing photo I can only save file as DNG, I want to save as JPEG. HOW??
THANKS LLOYD

BARBARA,Yes, you are so right, I was deceived by the eve button, Just tried it and it WORKS GREAT-Thanks for the help.
THANKS AGAIN AND HAVE A GOOD DAY Lloyd
From: Barbara B. <[email protected]>
To: Lloyd Bennett <[email protected]>
Sent: Tuesday, January 13, 2015 11:46 AM
Subject: When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
created by Barbara B. in Photoshop Elements - View the full discussionYou are being deceived by the Save button, like most people. That button is not the Save As button, really, but a link to the DNG converter. To save your raw file in an image format, click the Open button instead and then save in the format of your choice in the editor. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7092207#7092207 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7092207#7092207 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

How do i plug in camera raw nikon d610 to photoshop cs5?

I have Nikon D610 and want to work in camera raw. How do I plug in to Photoshop CS5?

Thanks for your help. Complicated but it works
Från: c.pfaffenbichler
Skickat: den 9 juli 2014 15:35
Till: Hillevi Björlund
Ämne: How do i plug in camera raw nikon d610 to photoshop cs5?
How do i plug in camera raw nikon d610 to photoshop cs5?
created by c.pfaffenbichler <https://forums.adobe.com/people/c.pfaffenbichler> in Photoshop General Discussion - View the full discussion <https://forums.adobe.com/message/6535528#6535528>

Downloaded camera Raw 8.7 and photoshop CS5 still won't run it

I'm going to cry if CS5 keeps stuffing me around...Can't update programs for any of the CS5 suite won't explain why, just bought a nikon D750 and had to download camera raw 8.7 and photoshop still won't recognise it, so far I have uninstalled and reinstalled it and it still fails to update. Any solutions out there

Also I should add the updater does not work on CS5, so you must manually download and install them.
Mac Adobe - Creative Suite : For Macintosh
Windows Adobe - Creative Suite : For Windows

Problem in Camera Raw 9.0 after Photoshop CC 2014 update

Similar Messages

Maybe you are looking for