Problem in capital transfer (cml)

Hi Guys,
I am working on SAP Erp 4.7. The module is CML. I am doing capital transfer using transaction FN8X. When I select transfer date and Target loan and I try to do posting , then i get error messge "Flow could not be created due to errors".
I am unable to understand the problem. I gave a lot of time and still I am unable to get thru.
Would be grateful if anyone can help.
Thanks,
JG

Sona....here is some basic information on the off-cycle batch process that will help you with your issue.
http://www.se80.co.uk/sapreports/r/rpuo/rpuocb00.htm

Similar Messages

Problem while transporting transfer rules in BW 3.5

Hi All,
I have a problem while transporting transfer rules in BW 3.5.
I have just checked the box for conversion to Transfer structure / Transfer rules of an infoobject and tried to transport it to quality. I got this below error message:
The selections T ZBW_ZBILLRATP_TEXT_BA specify more than one DataSource
Diagnosis
You need to select an individual DataSource based on the selection conditions
InfoSource =
Source System =
Object Version = T
Transfer Structure = ZBW_ZBILLRATP_TEXT_BA
although the select event is not unique.
Procedure
Check the objects to which the selection applies.
Reference to transfer structure ZBW_ZBILLRATP_TEXT_BA not available. No activation possible.
Message no. RSAR436
Diagnosis
Transfer structure ZBW_ZBILLRATP_TEXT_BA should be transported into this system.
However, no DataSource mapping refers to this transfer structure.
System response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer structure ZBW_ZBILLRATP_TEXT_BA is on the same transport request. Use the transport connection to create a consistent request.
Can any one provide me details of how to overcome this issue. I tried transporting all related objects.
Regards
Lakshmi

Hi Lakshmi,
Befor Transporting the Transfer rules, make sure that you are transporting the Active Versions of your Datasource & DataTarget between which your transfer rules exist.
Also make sure that the Transfer rules are active before it is transported.
Hope it helps!
Regards,
Pavan

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Problems with data transfer to CEN via SAPCCM4X agent

Hello!
We are facing with the the following problem with data transfer since we installed SAPCCM4X agent:
- new alerts can only be seen within alert history
- old alerts cannot be deleted
We checked the agents via RZ21 and also the appropriate log files do not get further information.
When we stop the SACCM4X agents and the monitoring data is representing via RFC connection everything is ok.
Can some one help to solve this problem?
Thank you!

As Woodmeister50 told, direct connect between two iMacs via Ethernet cable is much faster than via adaptor, I suppose.
OS X: How to migrate data from another Mac using Mountain Lion and earlier
OS X: How to migrate data from another Mac using Mavericks

Problem in Stock Transfer

Problem of Stock Tranfer :
Branches not make any STO for transferring any faulty material to Mahape, Because some material which are physically hold to branches not show in SAP Stock
Some material are dispatch from one branch to other branch, branch to Franchisee engineer how to maintain track threw SAP?
While making entries for PR & PO Or Making Document No(Storage location to storege location transfer ), I want to check matterial avelability for required plant, is it possible viweing the qunitity at time of entering PR.
After making I & C Confirmation and Techo , Billing Department not showing this data or showing partially process

Hello Tahir,
System's behaviour on FIFO is slightly change in case of inventory transfer. System does'nt keep any connection in physical FIFO (Serialized items) and FIFO cost in this case, as if one item first has been taken at USD 100 and then at USD 120, when you will transfer the stock and you choose 2nd serialized item which was taken at USD 120, system will pick the cost of USD 100 as of 1st item's cost because system creates layers for cost price and open quantities and at the time of inventory transfer, system only considers the first open layer of cost of the issuing warehouse. But all of this happens if your G/L determination is based on warehouse or item level. In case G/L determination is based on Item Group, your FIFO will work as per your requirements.
Regards,
Siddiq

Problem in Stock Transfer Depot to Depot.

Hi All,
The Scenario is we are importing the Trading Material to Depot from there we are transporting to other depot & then send to the Customer.
Import Material to Depot
1. ME21N - Import PO to Depot (normal PO u2013 Document type NB)
2. MIGO - Goods Receipt (movement type 101)
3. J1IG - Capture Excise
Stock transport Order from Depot to Depot
4. ME21N - Depot to Depot (Stock Transport PO u2013 Document type u2013 UB)
5. VL10B u2013 (Replenishment Delivery)
6. VL02N u2013 (Changing Delivery created in 5 above, picking & Post goods Issue)
7. J1IJ - Excise invoice capture must be according to (3) J1IG
8. VF01 u2013 (Creating Stock Transfer Invoice)
9. MIGO u2013 (GRN in Receiving depot)
10. J1IG - (over here i am not able to capture the excise from 7.J1IJ - I am doing excise capture from 3.J1IG. Even though its coming properly i like to clarify on this point.)
Eg:- Purchased : 5000 PCS > Post goods Issue & Excise invoice capture for 2000 PCS is done. After this process i am not able to capture the excise from J1IJ but i am capturing it from earlier J1IG it's taking up the excise for 2000 Qty.
Then the Normal Sale Process. Let me know any other thing has to be taken care in this process flow or this is the way it has to be done.
Note:-I am not able to capture excise in MIGO stage for this scenario alone. I am capturing at J1IG only. I need the kind inputs to solve the Problem.
Thanks in advance.
Sapuser
Edited by: Sap user on Nov 12, 2008 2:02 PM
Edited by: Sap user on Nov 13, 2008 8:08 AM

Hi All,
For this Scenario (Step 9 -MIGO) is done through Goods Reciept with Outbound delivery at this time i am not able to capture excise at MIGO stage as there is no commercial invoice is being created at this point. So i am capturing it at J1IG over thier if i give Internal Excise number generated from J1IJ it's giving an error Internal Excise number does not exist. It's working fine when i give the earlier Internal Excise number generated at (J1IG Step 3).
Thanks in Advance,
Sapuser
Edited by: Sap user on Nov 14, 2008 7:07 AM

Capital transfer goods

Hi CIN Experts,
When I have transfer the capital goods transfer on credit to next year through J2I8, but some of the entry has not been transfer to the current Cenvat On Hold account. In J2I8, I have given co. code, plant, posting date & excise group & selected list based on part 2 number. At the time of transferring, only SED available amount are not transferring means on that row BED, AED, SED, ECS, SECESS-Available but are not transferring. So here I am getting error that u201CBalance has occurred 'INR' with the following details in transaction currencyu201D. Exchange rate '00', amount ' 87.77-' and currency key 'INR'. The data in the transaction currency were transferred from the calling application.
Procedure- The error is probably in the calling application. Message No.-F5702. Please advice how to transfer the balance amount.
Regards,
Crompton

qwkfiqewhoinfoin

On a Mac, Just upgraded from Lightroom 4, to 5. Problems with Catalog transfer.

So I did the upgrade version of Lightroom 5 from 4. I did the catalog transfer to move all of my images over from lightroom 4 to 5. But now when I click on any of my old images (from a lightroom 4 catalog) in lightroom 5, I get an error message that says Lighroom has a problem reading the images. Last night I tried to export from lightroom 5 to my desktop and it did not work with the same error message coming up. Help!!! What am I (did I) doing wrong?

-Once I put the disc in I followed the procedures to upload LR5. This was successful. The first time I opened LR5 I was prompted to transfer my old LR4 catalogs to LR5 which I did.
-Now when I click on any image, once I click away, in the lower scroll bar of images an exclamation mark in a small circle. When you click on the exclamation mark this message appears "Lightroom has encountered problems reading this photo. You will not be able to make adjustments to the photo." This happens to every image I click on.

Problem with file transfer over the net

Hi!I'm trying to make a program that allows to send/receive files and I'm almost done,except for a little problem:the file received has some bytes missing at the end!
For example if I send a text the last 2-3 lines are missing,same thing for an image,an html document,etc.,although the file opens without any problem.As transport-level protocol I'm using TCP so it's not a networking problem,I think the problem is in the application layer so I post here the code,hoping someone helps me out(in this example I'm trying to send an image .jpg):
Sender:
Socket connectionSocket=new Socket("ipadress",port);
FileInputStream source=new FileInputStream(System.getProperty("user.home")+"\\Documents\\image.jpg");
BufferedOutputStream send=new BufferedOutputStream(connectionSocket.getOutputStream());
int c;
while ((c = source.read()) !=-1)
send.write(c1);
Receiver
ServerSocket receiverSocket=new ServerSocket(port);
Socket connection=receiverSocket.accept();
BufferedInputStream rec=new BufferedInputStream(connection.getInputStream());
FileOutputStream receivedFile=new FileOutputStream(System.getProperty("user.dir")+"\\received.jpg");
int c;
while ((c = rec.read()) != -1)
receivedFile.write(c);I think the problem is in this code:somehow the sender stops sending bytes before the end of the file is actually reached...what do u think?

Thank you so much!At the end it was a very stupid mistake!:D
Btw now that the main problem is solved I continue posting asking for your opinion:is this program for you efficient enough?Or there's a better way to do file transfer?

Problem with file transfer via wi-fi!

Hi, folks,
Please, could someone help me to get a music file I made using Groovemaker app?
After finish the mix, I built a song. Then, I saved it in the "mix browser".
In the end of the exporting process, I typed the URL address displayed in the browser (http://192.168.0.188:5555/, on Firefox, Chrome and IE), but something gone wrong and, every time I export the same song - it's my first exporting action - I got a message such "The page hasn't loaded... limit time reached".
What's the problem with my wi-fi connection? Should I set something in my router? According to the company website (http://www.groovemaker.com/gmiphone/features/) this kind of wi-fi file transfer is easy, but not to me...
Thanks in advance!
Alex

What type of errors is being generated? Are you trying to save that file on device memory or media card? try moving that file on media card.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Iphoto problem with file transfer

hello i have a problem, i transfer my iphoto library from my brother account to my account, and when i try to open them i can't because my mac tell me that i don't have license and power to do that. I've tried to change sharing settings from my brother account and also from mine, but in my accounts files don't open,help me please.

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Use the option to check and repair Library permissions.

Re Problem with Log & Transfer

When capturing using log & transfer,the media shows in transfer window but after adding it to queue it then shows in status button as no data? Can anybody help.

I have an imac 2ghz intel core duo memory 1gb using snow leopard 10.6 & quicktime 10.6 I have just installed a 2nd external hard drive seagate free agent goflex My camera is Sony HDR-XR105 AVCHD. I have been able to upload in the past ok but the problem has only occured since installing the extra drive .Connected by USB.

Buget Exceed problem regarding material transfer in project system

Hello Sir,
I have a problem regarding budget in project system.
when i do budget and release . and do any transaction
with that budgeted wbs element in particular project.
i get budget excced errors usally.
however, budget remains more than exceeded buget.
Let us touch with a example in brief, we have a buget for a L&T project 10 Lakh.
Buget Release actual cost total cost commitment
10Lakh 10Lakh 8lakh 1Lakh
when i transfer a material from another project to this L&T project material worth is 50thousands.
i get a errors for L&T project budget exceed with 40thousands.
however in project budget remains 1Lakh remaining .
why system shows errors for this material transfer worth rs 50thousands
Please help me regarding this problem where is 1lakh budget
with regards
sanjay agrawal

Hello sir,
there is no any problem regarding budget supplement but if project sometimes
remains 20lakh buget price remaining out of 50lakh.
and need 1 lakh material price for transfer in project
then why need to do budget supplement for 1 lakh if project
remains 20lakh price rest.
please guide me for above problems
with regards
sanjay agrawal

Problem with file transfer

When i try to transfer a non zipped file or a pages file i've got this error, it's recent but can't tell you when. But I can transfer image (jpg, png...)
I've Chax version 1.4.8 for Mac OS X 10.4.3.
Impossible d’envoyer le fichier “Sans titre.pages” à XXXXX xxxxxx <[email protected]> :
Une erreur est survenue.
Your buddy cannot receive transfers of directories (folders). You could create and send a zip archive of the directory before sharing, or share each file in the directory individually.
Thx for your answer

No problem.
Unsubtle hint time.
New Discussions ReponsesThe new system for discussions asks that after you mark your question as Solved. You should take the time to mark any posts that have aided you with the tag and the post that provided your answer with the tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
Alternatively, you can change the status to Answered.
If we use the forums properly they will work well...
7:36 PM Friday; April 13, 2007

Problems is stock transfer delivery

Dear All,
i am facing problem in delivery.i created stock transfer with reference to purchase order.
But in delivery number, quantity is coming less.means in PO quantity is 20 KG but in delivery it showing 9 kg only.
i cheked in MMBE tcode for particular material code & system is showing enough quantity.
how can i resolve this problem.
Regards
Ajit

check in MD04, requirement already reserved to any orders
or
check is there any open delivery exists.
check in, PO history tab in this PO, whether OBD is already created
check, storage location stock as well.

Problem in capital transfer (cml)

Similar Messages

Maybe you are looking for