Problem in certificate profile assignment during QC15

Dear SAP Gurus,
1.In Development server while assignment of certificate profile  we can see the combination of Material/Plant.
2. In production server  while assignment of certificate profile  we cannot see the combination of Material/Plant.
Can anybody please suggest the solution.
Regards
Debjeet

we have only  three options
1)material/customer
2)material
3)Material Group  where is Material/Plant option i conn't get

Similar Messages

  • Certificate Profile Assignment - QC15

    Hi All,
    Is there any standard object/Bapi/Idoc to create 'Certificate Profile Assingnment' for the t-code 'QC15'?
    Thanks in Advance.
    Senthil J

    we have only  three options
    1)material/customer
    2)material
    3)Material Group  where is Material/Plant option i conn't get

  • Certificate Profile Assignment for QM

    Hi,
    Can someone tell me what the path is on SPRO to create a new Assignment/Condition Type used on QC15?
    Thanks

    Hi Bill,
    Thanks for your answer, probably I was not clear enough, I am loking for the path but in IMG in order to configurate a new Assignment Type.
    Thanks

  • NDES - SCEP - Certificate Profile 0X87D1FDE8 Remediation failed - Deployment of Certificate Profiles

    Hy all,
    i have a problem with certificate profiles deployment via SCCM 2012 R2.
    My Testlab:
    Server 2012 R2 - DC
    Server 2012 R2 - CA
    Server 2012 R2 - SCCM 2012 R2, Intune Subscription ...
    Server 2012 R2 - NDES, SCCM Site System with Certificate Registration Point, Policy Module
    NDES Service Account (SPN for NDES Server)
    CA:
    Administrative Rights for NDES Service Account
    CEP Encryption (Read&Enroll for NDES Service)
    Exchange Enrollment Agent (Offline request) (Read&Enroll for NDES Service Account)
    Webserver Certificate for NDES, SCCM Server (Dublicatet Webserver Template)
    Client Authentication Certificate for NDES, SCCM Server (Dublicatet Template for Client Authentication)
    "Custom IPSec V2" Template, (Dublicatet Template of IPSec (offline request), Read&Enroll for NDES Service Account)
    Policy Module on NDES Server
    In the Wizard i selected the Client Authentication Certificate
    NDES Server
    Installed "Network Device Enrollment Service" Role Service
    SCCM Site System, SCEP Role
    Location: HKLM\SYSTEM\CurrentControlSet\Services\HTTP\Parameters
    Value: MaxFieldLength
    Type DWORD
    Data: 65534 (decimal)
    Location: HKLM\SYSTEM\CurrentControlSet\Services\HTTP\Parameters  
    Value: MaxRequestBytes
    Type DWORD
    Data: 65534 (decimal)
    SSL settings to “Require” SSL , “Ignore” client certificates.
    NDES Service Account member of IIS_IUSRS
    IIS - Webserver Certificate for :443 Binding
    HKLM\SOFTWARE\Microsoft\Cryptography\MSCEP
    EncryptionTemplate, GeneralPurposeTemplate, SignatureTemplate
    i set it to "CustomIPSecV2"
    SCCM:
    Installed Certificate Registration Point on NDES Server
    Certificate Registration Point Properties - URL for the Network Device Enrollment Service ...
    I set it to: https://externalfqdn/certsrv/mscep/mscep.dll
    Certificate Root CA Profile
    Certificate Profile for "CustomIPSecV2" Certificate
    Now i have following error for the deployment of the "CustomIPSecV2" Certificate: 0X87D1FDE8 Remediation failed
    I can not find any error in the logs (SCCM, crp.log, NDESPlugin.log, crpctrl.log)
    In the IIS log there are following entries:
    2014-08-02 18:57:41 fe80::10b7:f62:ec3c:605d%12 POST /CMCertificateRegistration/certificate/generatechallenge - 443 - fe80::10b7:f62:ec3c:605d%12 SMS_CERTIFICATE_REGISTRATION_POINT - 201 0 0 3502
    2014-08-02 14:07:40 172.16.0.8 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 144.11.115.119 - - 200 0 0 68
    What can i do?
    Thanks in Advance ..

    Hello!
    I still have the same problem - Remediation failed - 0X87D1FDE8
    Is this only a problem of the certificate template?
    I also reinstalled NDES Server and CRP Role on Primary Site
    Has anyone an idea?
    CRPSetup, crpctrl, CRPMSI all ok.
    IISLog:
    #Software: Microsoft Internet Information Services 8.5
    #Version: 1.0
    #Date: 2014-10-13 13:09:35
    #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
    2014-10-13 13:09:35 172.16.0.6 GET /certsrv/mscep/mscep.dll - 80 - 172.16.0.5 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) - 200 0 0 1179
    2014-10-13 13:09:37 172.16.0.6 GET /favicon.ico - 80 - 172.16.0.5 Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+6.3;+WOW64;+Trident/7.0;+.NET4.0E;+.NET4.0C) - 404 0 2 1384
    2014-10-13 13:14:01 172.16.0.6 GET / - 80 - 172.16.0.4 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 1
    2014-10-13 13:14:01 172.16.0.6 GET /iis-85.png - 80 - 172.16.0.4 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko
    http://server.external.fqdn 200 0 0 6
    2014-10-13 13:14:03 172.16.0.6 GET /favicon.ico - 80 - 172.16.0.4 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 404 0 2 1
    #Software: Microsoft Internet Information Services 8.5
    #Version: 1.0
    #Date: 2014-10-13 13:15:24
    #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
    2014-10-13 13:15:24 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 172.16.0.4 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 2
    2014-10-13 13:15:24 172.16.0.6 GET /favicon.ico - 443 - 172.16.0.4 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 404 0 2 4
    2014-10-13 13:15:40 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 47
    2014-10-13 13:15:40 172.16.0.6 GET /favicon.ico - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 404 0 2 47
    2014-10-13 13:20:08 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 49
    2014-10-13 13:20:08 172.16.0.6 GET /favicon.ico - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 404 0 2 47
    2014-10-13 13:25:32 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 48
    2014-10-13 13:25:32 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 50
    2014-10-13 13:25:33 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 49
    2014-10-13 13:35:17 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 49
    #Software: Microsoft Internet Information Services 8.5
    #Version: 1.0
    #Date: 2014-10-13 13:43:25
    #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
    2014-10-13 13:43:25 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 150
    2014-10-13 13:43:32 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 104.45.8.80 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 6
    2014-10-13 13:43:42 172.16.0.6 GET /certsrv/mscep/mscep.dll - 443 - 172.16.0.4 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 1
    2014-10-13 13:47:25 172.16.0.6 GET /certsrv/mscep operation=GetCACert&message=MyDeviceID 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 301 0 0 47
    2014-10-13 13:47:25 172.16.0.6 GET /certsrv/mscep/ operation=GetCACert&message=MyDeviceID 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 50
    #Software: Microsoft Internet Information Services 8.5
    #Version: 1.0
    #Date: 2014-10-13 13:52:22
    #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
    2014-10-13 13:52:22 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 233
    2014-10-13 13:52:22 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 46
    2014-10-13 13:57:00 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 56
    2014-10-13 13:57:00 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 41
    2014-10-13 14:03:26 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 62
    2014-10-13 14:03:26 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 46
    #Software: Microsoft Internet Information Services 8.5
    #Version: 1.0
    #Date: 2014-10-13 14:19:25
    #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
    2014-10-13 14:19:25 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 1278
    2014-10-13 14:19:25 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 52
    2014-10-13 14:19:31 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 104
    2014-10-13 14:19:31 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 74
    2014-10-13 14:21:07 172.16.0.6 GET /certsrv/mscep/ operation=GetCACert&message=MyDeviceID 443 - 193.83.183.27 Mozilla/5.0+(Windows+NT+6.3;+WOW64;+Trident/7.0;+rv:11.0)+like+Gecko - 200 0 0 62
    #Software: Microsoft Internet Information Services 8.5
    #Version: 1.0
    #Date: 2014-10-13 14:26:01
    #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
    2014-10-13 14:26:01 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 294
    2014-10-13 14:26:01 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 46
    2014-10-13 14:26:07 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 56
    2014-10-13 14:26:07 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 52
    #Software: Microsoft Internet Information Services 8.5
    #Version: 1.0
    #Date: 2014-10-13 14:46:41
    #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) cs(Referer) sc-status sc-substatus sc-win32-status time-taken
    2014-10-13 14:46:41 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 601
    2014-10-13 14:46:41 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 47
    2014-10-13 14:46:51 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 99
    2014-10-13 14:46:51 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 78
    2014-10-13 14:50:40 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 46
    2014-10-13 14:50:40 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 66
    2014-10-13 14:51:53 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACert&message=MDM 443 - 193.83.183.27 - - 200 0 0 46
    2014-10-13 14:51:53 172.16.0.6 GET /certsrv/mscep/mscep.dll/pkiclient.exe operation=GetCACaps&message=MDM 443 - 193.83.183.27 - - 200 0 0 62
    Christoph R 13

  • Creating certificate profile

    Hi all,
    Please tell me what are the mandatory fields in the creation of profile ?
    what are the diff. config. settings?
    thnx

    Steps in IMG
    Certificate type can be crated for identification, hence you can crate type in img (Quality ManagementQuality CertificatesCertificate ProfileDefine Certificate Types)which you can assign a status profile if required.
    Define a form which you can use the std one
    Define Data Origin and Profile Determination u2013 this I think std can be used unless you want to defer  SAP std. This will help to choose a certificate profile incase if you have more than one for a particular combination
    Transaction
    In QC01 use the certificate type created and enter a name for profile.
    Give the name of form.
    Click on characteristics overview button and enter the details. and then the release the profile
    In QC15 assign the material to certificate.
    Try and come back

  • QM layout set QM_QCERT_01 for certificate profile

    Experts,
    I'm creating a certificate profile in QC01 and I want to assign form QM_QCERT_01 as a layout set. It's the standard SAP form for the quality certificate.
    But I get the error message: "Text QM_QCERT_OFF_SPEC_TEXT not available for layout set QM_QCERT_01" (Message no QC 094).
    Diagnosis: In the form QM_QCERT_01, a reference exists to text QM_QCERT_INSPECTION_METHOD (text ID ST, language EN). However, this text is not available in the current client. This may be due to one of the following reasons:
        o  The text is only available in the original client.
        o  The text is not available in either the original or the current client and should therefore be created.
    System Response: The text cannot be evaluated while the certificate is being created. Information and logical queries could be lost for this reason.
    Procedure: Check your entries in form QM_QCERT_01. If required, create the text QM_QCERT_INSPECTION_METHOD.
    If the text is only available in the original SAP client, copy it in all languages (if necessary) from the original client to the current client. To do this select Tools -> SAPscript -> Standard text -> Utilities -> Copy from client.
    How do I check if the text is available in the current client? How do I add or create the missing text?
    Thanks. Rgds

    If you are not sure then you can copy the std form and text in SPRO>QM->basic settings>
    Transfer QM Standard Texts  
    Transfer QM Forms.
    hence from 000 client this will be copied and then you can check it once again..if still problem persistis then it is sure that it is not available in std sytsme and you need to talk to ABAPer to cretae a text element  QM_QCERT_OFF_SPEC_TEXT .
    This may be created in your client and assigned to layout...just check

  • No certificate profile found

    Hi Everyone,
    I am trying to generate certificates when we do a post goods issue for an outbound delivery.
    When I go to vl03n and go to extras, delivery output, header; I see two entries one for LQCA and one for LQCB.  both have a red status and the processing log states that "No certificate profile was found".
    I used QC03 and did a search using assignment on the certificate profile field and entered the material number that is on the outbound delivery.
    the system pops up a window that shows that material assigned to a Cert. profile on 4/2/2008.  The outbound delivery is for 4/16/2008.
    Any idea what I should be looking for?
    Thanks,
    Mike

    Hi Mike,
    Please check the Validity Period of CErtificate Profile and assignment.
    You may create a new asssignment is QC15 for the combinations of Plant/Material etc.
    Thanks and regards
    Murugesan

  • Delete the assignments for the certificate profile

    Hi Experts,
    Can anybody please tell me how to delete the assignments of material for the certificate profile.
    Regard
    Raja S

    Hi Shyamal,
    I Run Trx QC18 , Entered Key Combination, same as what I have entered at the time of assignment through QC15. In the next screen,  I entered the material code to delete from the Profile.& Execute
    But in next screen there was no combination of material & profile in line item.
    What to do.

  • ICC profiles assigned to text?

    CS5 (patched to 7.03), Mac OS 10.6.7
    Hi Everyone,
    My production coordinator made a PDF of my magazine for the printer yesterday and when he ran it through PitStop, several errors turned up to the effect of text having an ICC profile assigned to it. The text was several instances of periods and commas, the color was [Black] 100%, Adobe Caslon font, same as the rest of the text on the page and throughout the magazine that didn't get dinged as an error. Retyping the offending characters fixed the problem, but how can something like this happen? Or rather, How can it be detected from within InDesign rather than in PitStop?
    We import Word docs styled with Word styles into InDesign to lay out the magazine.
    PDFs are created by printing to ps file then distilled with the joboptions the printer provided.
    I admit I know very little about color management (we don't use profiles, per printer request, so I've had limited exposure) but I thought it was only for images and profiles couldn't get assigned to individual characters of text.
    Thanks for your insight!

    Hi,
    Please check the following note:
    [Note 7312 - Client 066 for EarlyWatch|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=7312]
    EARLYWATCH user:
    Profile (in Basis rel 40*-46D)
              o S_SDCC_READN    Read authorization
              o S_SDCC_SERVN    Collect and send data
              o S_SDCC_ADM_N    Admin authorization                                                                 *
    Roles (as of Basis Release 6.10)
              o SAP_SDCCN_DIS   Read authorization
              o SAP_SDCCN_EXE   Collect and send data
              o SAP_SDCCN_ALL   Admin authorization
    http://help.sap.com/saphelp_nw70/helpdata/en/3e/cdaccbedc411d3a6510000e835363f/content.htm
    Also check the following SAP notes:
    [Note 91488 - SAP Support Services - Central preparatory note|https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=91488]
    [ote 863362 - Security checks in the SAP Early Watch Alert|https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=863362]  --- this will give overview of Required Authorizations.
    Regards,
    Dipanjan
    Edited by: Dipanjan Sanpui on Jul 16, 2009 2:30 PM

  • Error - No date profile assigned to the transaction/item category

    Dear Expterts,
    I am getting the error while trying to create a complaint (In-house repair) transaction.
    No date profile assigned to the transaction/item category
    Message no. CRM_BILLING015
    System Response
    Billing dates cannot be maintained.
    Procedure
    Assign a date profile to the transaction type or item category in Customizing.
    Make sure that this date profile contains all the necessary date types:
    BILL_DATE
    INVCR_DATE
    date profiles are assigned to both transaction type and Item category. mentioned date rules are in place in standard configuration itself. still the problem persist.
    Please help me to resolve the issue. Your help will be highly appreciated.
    Best regards
    Raghu ram

    Hi Pepe,
    Thanks for the response, these transaction types are already there. and 'Today' date rules are assigned to both date types.
    Still the problem exist.
    Best regards,
    Raghu ram

  • Problem in Requirement profile ranked list updation  in cj20n(PS)

    Hi
    I have created requirement profile in HR and qualifications for emoployees.Suitability ranges are also assigned But during work force planning in Cj20 n,It is not displaying Ranked list of employees on the basis of Requirement profile assigned.
    Thanks

    Hi,
       You can find the ranking list in the Person Assignment tab of network activity.
    Is the Rank List icon itself missing?
    Rdgs
    Sudhir Reddy

  • Certificate profile not found...

    Hi
    I want to create certificate of Analysis for deliveries
    What I did is
    1. QC01 - assign the characteristic -- MIC, origin of result -inspection; no
    specification - inspection lot origin 04
    2. QC - material, customer and profile assigned
    3. VV21 - customer - SH/SP
    4. VL02n - Delivery created
    5- QC20 - create certificate for deliverie
    I was getting message "No message for initial processing exist ''
    what is wrong or Am I missing some thing
    But I am able to see the certificate for inspection lot-qc21 but not able to
    generate from transaction QC20.
    Reg,
    Suman Dev

    Hi,
    Welcome to SDN. You can also refer Search Forum for all the queries.
    You can follow the below link.
    [QC20|http://sap.ittoolbox.com/groups/technical-functional/sap-log-qm/to-print-quality-certificate-in-qc20-2259203]
    Best Regards,
    Ankur

  • 13.02 update changes smart object / icc profile assignment behavior?

    Since updating to the 13.02 release of photoshop CS6 extended I have noticed the following modified behavior:
    When changing the assigned profile of an image containing smart objects, where the smart objects have previously gone through a color profile conversion - the smart objects will get reconverted to the newly assigned profile.
    This was certainly not the behavior of 13.01 and previous versions.
    Is this an intentional change?  If it is shouldn't it be noted in the release notes?
    System info: mac os x 10.6.8

    I think I understand the rational for this change, but I think it misses the mark a bit.
    In my experience the largest source of smart-object trouble is when someone converts a document without first assigning a profile, relying on the profile set in photoshop's color settings.  When the smart-object is edited on another computer the color will shift if the color settings on the two computers don't match exactly.
    By reconverting smart objects on profile assignment you are creating two new problems. 
    Only smart objects are reconverted, so documents with both smart and not-smart layers will end up in an inconsitent state.  Colors that matched within the same image may no longer match.
    If a document is saved without a profile assigned and you later want to assign it a profile, you will have to use the original profile or your color will shift.  It is not uncommon when working with documents from other organizations that the original profile used for conversion is not available.
    What then is the fix for this problem?  Always embed the profiles used for conversion within the smart objects for use when updating.  Source and destination.

  • Single material mtutiple Certificate profile.

    How to system will select automatically certificate profile for a particular inspection lot. On the other way for one material more than one certificate profile for different inspection type will be assign in system.

    Its certainly depends upon the Material-Inspection lot origin & Inspection type combination for a certificate profile .
    A combination of origin and inspection type can only appear once in the list for a material while assigning to a certificate profile.
    When a Inspection lot is created system check the MaterialInspection lot origin-Inspection type ---Certificate profile combination.

  • MIC Selection in certificate profile on the base varsion.

    Dear Experts,
    i am not able to get my required MIC with valid task list selection on the date base, I have a MIC with versions 1,2,and 3 i need to select the MIC with version 1, i have created a certificate profile and for selecting the MIC i have chosen from Extras- Characteristic from valid task list and gave the valid group and the old date in which the MIC with version 1 is valid after selecting the MIC if i go and check in the display MIC i am observing the new MIC with version 3 only, But if i directly enter the MIC and its version number it is selected where as i am not getting it when i select it from task list, please let me know if the behavior is as per the standard SAP or not and is there any possibility to select the old version MIC from the Task list directly.
    Regards,
    Naveen.

    Hi Sujith,
    For example:
    My MIC Details:
    MIC       Version     Created       and  Changed
    A        -       1        -   17.10.2008   
    A        -       2        -   17.10.2008   and  22.06.2011
    A        -       3        -   17.10.2008   and  22.06.2011
    A        -       4        -    17.10.2008  and  12.10.2011
    Task List:
    Group           Change number          Valid from              MIC      Version
       1          -        NA                      -     23.10.2008      -       A      -      1    
       1          -      10000008994       -     20.10.2011      -       A      -      4
    Change number details:
    10000008994    Created on:22.06.2011 changed on:18.10.2011 and Valid from date:20.10.2011.
    Now i created Certificate Profile today and while selecting the MIN from Task list i gave the details as Group and valid from date as 19.10.2011 and found the MIC A with version 1 and selected the version and after saving when i go and check the MIC details i found it as MIC A with version 4 dint understand why it is version 4 even after i selected version 1 and saved it.
    Can you please comment on this why it is changing like this but one thing i observed is if i directly enter the MIC and give the version as 1 and save, it is remaining the same.l am getting this problem only when i select it through task list.
    Regards,
    Naveen.
    Edited by: vaddapalli naveen on Feb 22, 2012 5:43 PM
    Edited by: vaddapalli naveen on Feb 22, 2012 5:48 PM

Maybe you are looking for

  • Error while deploying new application

    Hello All, I have created a webdynpro application and deployed on the server using upload archive transaction. I can see the MCD in NWA and corresponding dependencies, but when i deploy the application  i am getting the following message in trace fil

  • I've been using PScc for 2 months and suddenly when I open a file in camera raw and attempt to use the

    radial, graduated and adjustment filters those and all the other options which do work  are immediately  "greyed out" and I've got to restart the computer to get rid. Assistance would be greatly appreciated.  Win 8.1 64 bit

  • I'm getting error when running exec of Process class

    Hi I am running a standalone application in WSAD 5 and the platform is Windows XP. I get the following error each time when I run this : java.io.IOException: CreateProcess: C: error=5 The code snippet is the following : if (Runtime.getRuntime().exec(

  • Material ledger not closed

    Hi , I am facing one issue in which the material ledger for a material has not been closed for a particular month. We have price difference in beginning and cumulated inventory. Is it because of the price difference ? or can it be due to some exchang

  • Muvo² fm media error fixed

    everytime i booted my muvo? fm 5 gb it automaticly went to the recovery mode and whatever i choose in the recovery mode it said: media error pc wont even detect the player but i fixed it (god tnx) this is what i did: i tried to format my muvo?fm 5 gb