Problem in cfobject timeout

while calling java class in cfobject,getting request time out
error.How to increase request time for cfobject(only page level),i
used cfsetting to increase but the things are not working.I am
using coldfusin mx 6.1.Any help should appriciated

while calling java class in cfobject,getting request time out
error.How to increase request time for cfobject(only page level),i
used cfsetting to increase but the things are not working.I am
using coldfusin mx 6.1.Any help should appriciated

Similar Messages

  • Airport does not detect wireless network; it says problem = [network]"connection timeout"

    It is not a problem of signal strength, and my Airport detects other networks. It used to detect the network I want to connect to, for two years. It suddenly stopped detecting the network (which is WPA Personal password-protected). When I select choose other network and type in the password, it won't connect to it claiming "connection timeout."
    This happened before. Then after several days, Airport was able to detect and connect to the network I want. Now it again won't detect the network, and this seems permanent short of taking measures to address the problem. Should I try connecting manually to the network, and hodo I got about that? Thank you to anyone out there ho might be able to help.

    i have a macmini (OS 10.5) and use a belkin wireless router. When I turn on Mac address filtering on the router I have an Intermittent problem. The airport does not recognize the wireless network. On the network preferences panel there is a message that the airport is using a self assigned IP address. sometimes the message says the airport has no IP address. If I turn off the Mac address filtering and use a WAP password only the network is recognised and connects without a problem. How do I resolve this? I dont have the problem with a iBook using system 10.4. Is turning off the Mac address filtering secur?

  • Problem with VPN timeout on Cisco ASA5505

    Hi i'm sorry if it's vague, but i'm coming here without any  config simply because i don't have access.
    At work we have 1 Cisco ASA5505 which is used for IPSEC VPN only.
    We have 4-5 users that work 100% from the VPN (8h per day 40h per week)
    The problem we have will be the disconnection.
    We have 1 user that will never never never have the problem (he can stay log all 8h if he wants to)
    The 2nd user can get disconnected, but mostly if the VPN stays on for too long without any action.
    Me and the other user can get frequent Disconnection in a day, but  it's all random (1 days i can get disconnected 0 times and the next day 3 times)
    I am using Mac OS 10.7 (just like the one that never gets disconnected and the one that gets disconnected randomly)
    The other person who gets disconnected alot is on Windows 7 32 bits with Cisco Client.
    On my side when i get disconnected there is 2 problem i see (it will happen to the windows person too)
    1) When i'm working on servers sometimes i won't be able to click anywhere and i see that my connection is still on, so i need to close it manually wait 2 minutes then reconnect.
    2) When i check my VPN connection it simply disconnected alone.
    Thanks for possible solutions.   (also the windows client had another PC Before and she said it never disconnected, but it started on new PC)  (Before she was on WinXP)
    Thanks

    Hi i'm sorry if it's vague, but i'm coming here without any  config simply because i don't have access.
    At work we have 1 Cisco ASA5505 which is used for IPSEC VPN only.
    We have 4-5 users that work 100% from the VPN (8h per day 40h per week)
    The problem we have will be the disconnection.
    We have 1 user that will never never never have the problem (he can stay log all 8h if he wants to)
    The 2nd user can get disconnected, but mostly if the VPN stays on for too long without any action.
    Me and the other user can get frequent Disconnection in a day, but  it's all random (1 days i can get disconnected 0 times and the next day 3 times)
    I am using Mac OS 10.7 (just like the one that never gets disconnected and the one that gets disconnected randomly)
    The other person who gets disconnected alot is on Windows 7 32 bits with Cisco Client.
    On my side when i get disconnected there is 2 problem i see (it will happen to the windows person too)
    1) When i'm working on servers sometimes i won't be able to click anywhere and i see that my connection is still on, so i need to close it manually wait 2 minutes then reconnect.
    2) When i check my VPN connection it simply disconnected alone.
    Thanks for possible solutions.   (also the windows client had another PC Before and she said it never disconnected, but it started on new PC)  (Before she was on WinXP)
    Thanks

  • Problem with cfobject calling java class

    hi there,
    i have a small java class that takes 2 arguments in
    (fileToRead & fileToWrite) and everything runs fine when i run
    the class from the command line...
    C:\>java csvParser fileToRead fileToWrite
    however when i try to instantiate the class via cfobject like
    so :
    <cfobject type="Java" action="create" class="csvParser"
    name="convert">
    <cfset convert.init(#tmpfile#, "text.xml")>
    it continuously throws the following error at me :
    Unable to find a constructor for class csvParser that accepts
    parameters of type ( java.lang.String, java.lang.String ).
    any ideas ast to what i may be missing here...startin to
    drive me batty.

    C:\>java csvParser fileToRead fileToWrite
    Suggests you passed arguments as args[0] and args[1] to the
    method
    public static void main(String[] args)
    <cfobject type="Java" action="create" class="csvParser"
    name="convert">
    <cfset convert.init(#tmpfile#, "text.xml")>
    Suggests the code for the class CSVParser has the following
    constructor definition:
    private String s1, s2;
    CSVParser (String s1, String s2) {
    this.s1=s1;
    this.s2=s2;
    This seems unlikely, in view of
    "everything runs fine when i run the class from the command
    line". One possibility is to convert the
    public static void main method into, for example, the public
    method
    doThemFiles(String s1, String s2), not forgetting to include
    the return-type in its signature. You could then run
    <cfobject type="Java" action="create" class="csvParser"
    name="convert">
    <cfset convert.doThemFiles("#tmpfile#", "text.xml")>

  • Lenovo u330p problem mit bildschirm ausschalte​n/ problem with display timeout

    hallo! 
    ich bin neu hier. habe das u330p... bin total zufrieden damit, aber es gibt ein problem:
    wenn sich der bildschirm ausschaltet ( z.B.: energiesparmodus bei mir nach 5 minuten) dann lässt sich das ultrabook nicht mehr aufwecken du tastendruck oder einschaltknopf oder durch deckel auf und zu klappen. ich muss dann immer lange auf den einschaltknopf drücken und dann startet es quasi neu. natürlich bootet es extrem schnell, aber das kann ja nicht der sinn hinter dem bildschirm ausschalten sein ;-). der fehler ist reproduzierbar mit allen energieeinststellungen. sobald das display ausgeht, muss man also komplett neustarten per langem einschaltknopf drücken. 
    ich habe win 8.1 oben und auch sonst alle updates. ich bitte um hilfestellung.
    lg geri
    ps: da ich mir nicht ganz sicher bin, ob man hier nur deutsch oder englisch oder beides spricht, schreibe ich noch mal auf englisch:
    hy! my problem is, that if the screen turns off because i didn´t do anything for 5 minutes (energy options) then i have to restart the system per pushing the "turn off/on" button long. normally it should start wenn i push any key, or when i close and open the ultrabook again. the malfunction is repeatable. i hope someone can help me, sorry for my bad english.

    We all have the same problem. Please help us!
    Hallo liebe Community,
    auch ich reihe mich ein in die besorgten und ratlosen Besitzer des Lenovo U330p. Ich habe das Energy Management Center von Lenovo selbst schon deinstalliert und alle Energieeinstellungen durchprobiert, um das Problem zu beheben. Das hat aber alles nichts gebracht. Das Display bleibt dunkel, nachdem sich der Laptop in den Energie-Sparmodus gefahren hat. Manchmal kann man sogar beobachten, wie das Display etwas heller und wieder dunkler wird - immer in kurzen Abständen. Sieht nicht gesund aus. Ich hoffe, es gibt ganz schnell eine Lösung. 
    google translation;
    I also row me to the worried and perplexed owner of Lenovo U330p. I myself have already uninstalled the Energy Management Center of Lenovo and tried all power settings to fix the problem. But that did not help anything. The display remains dark after the laptop has gone into power-saving mode. Sometimes you can observe how the display is slightly lighter and darker again even - always in short intervals. Does not look healthy. I hope there is a solution very quickly.
    LG
    Lisbeth
    Moderator Note; translate.google.com translation of above added.  This forum's language is English, please provide a translation or visit the German forum which can be reached through Support In Other Languages menu at the top of the boards.

  • Problems with backlight timeout

    I have BB 8120 pearl smartphone.  The backlight times out after 30 seconds and I would like it to stay on longer. I know how to correctly change and save that value, yet it won't retain that information for more than a couple hours before I have to go back to the options application and "re-save" the information.  I have removed and replaced the battery as well as re-installing the softwear and operating system.  Any other ideas to try?  The phone is about one month old and works well otherwise.  Thanks in advance to all who respond.

    The BBlight sounded alright but its not supported on my phone and I don't trust any of the sites that host it. I'd went with screenlight which is on the blackberry app world
    http://appworld.blackberry.com/webstore/content/68​08

  • Oracle 10g - Set Operator Union Causing Timeout Network problem

    Purpose is to get all of the customers not contacted given a starting date and current date(sysdate). The problem is a timeout issue because the query is inefficient. Example: A salesman has 6,946 rows returned from the cust table where his salesid =1163. Then the inner query:
    ‘SELECT count(Customer_ID) FROM cust_info WHERE info_type_id = 32’
    returns 225505 rows just based on this info_type_record.
    Next, ‘SELECT c.customer_id
      FROM customer c,
        event e
      WHERE c.salesperson_id = 1163
      AND e.eventdate BETWEEN '10-Feb-2010' AND TRUNC(SYSDATE)
      AND c.customer_id = e.customer_id
      GROUP BY c.customer_id’
    Returns 231 rows
    Finally, ‘SELECT c.customer_id
      FROM customer c,
        note n
      WHERE c.salesperson_id = 1163
      AND n.created_date_time BETWEEN '10-Feb-2010' AND TRUNC(SYSDATE)
      AND n.note_type_id IN (1,3,4)
      AND c.customer_id   = n.pk_id
      AND n.table_name    = 'CUSTOMER'
      GROUP BY c.customer_id’
    Returns 399 rows.
    How can I improve the structure of this query(see bottom)? The following is a sample data structure:
      CREATE TABLE "CUST "
       (     "CUST_ID" NUMBER,
         "SSN" VARCHAR2(9),
                      "SSN_TYP" NUMBER(1,0),
         "CREATED_DTE_TME" DATE,
         "FULLNAME" VARCHAR2(110),
         "F_NAME" VARCHAR2(35),
         "L_NAME" VARCHAR2(40),
         "BDTE" DATE,
         "DCEASED_DTE" DATE,
         "SALES_ID" NUMBER DEFAULT NULL,
         "BRNCH_ID" NUMBER,
         "HOME_BRNCH_ID" NUMBER,
         "TTL_ASSETS" NUMBER,
         "TTL_ASSETS_DTE" DATE,
         "NO_MAILINGS" NUMBER(1,0),
         "NO_CALLS" NUMBER(1,0) ) ;
      CREATE TABLE "CUST_INFO"
       (     "CUST_INFO_ID" NUMBER,
         "CUST_ID" NUMBER,
         "INFO_TYPE_ID" NUMBER ) ;
    CREATE TABLE "EVENT"
       (     "EVENT_ID" NUMBER,
         "EVENTDATE" DATE,
         "CUST_ID" NUMBER,
         "SALES_ID" NUMBER,     
                      "EVENT_INFO" VARCHAR2(4000)  )
    ENABLE ROW MOVEMENT ;
    CREATE TABLE “NOTE"
       (     "NOTE_ID" NUMBER,
         "NOTE_TYPE_ID" NUMBER DEFAULT 0,
         "TABLE_NAME" VARCHAR2(50),
         "PK_ID" NUMBER,
         "CREATED_DTE_TME" DATE ) ;
    INSERT INTO CUST VALUES(20151,'009529433',1,'01-MAY-5','FRENCH','D','M','01-DEC-01', '05-JUN-05',1163,
    NULL,0,NULL,NULL,NULL,NULL)
    INSERT INTO CUST_INFO VALUES (15,1001,32)
    INSERT INTO EVENT VALUES (5,'05-MAY-05',1001,1163,'NONE')
    INSERT INTO NOTE VALUES (100,2,'CUST',1001,TRUNC(SYSDATE))
    SELECT CUST.CUST_ID,
      SSN,
      F_NAME,
      L_NAME,
      CREATED_DTE_TME ,
      TTL_ASSETS,
      BRNCH_ID,
      SALES_ID ,
      BDTE,
      SSN_TYP,
      FULLNAME,
      Home_BRNCH_ID ,
      No_Mailings,
      No_Calls,
      DCEASED_DTE,
      TTL_ASSETS_DTE
    FROM CUST
    WHERE SALES_ID          = 1163
    AND CUST.CUST_ID NOT IN (
      (SELECT CUST_ID FROM cust_info WHERE info_type_id = 32
    UNION
      (SELECT c.CUST_ID
      FROM CUST c,
        event e
      WHERE c.SALES_ID = 1163
      AND e.eventdate BETWEEN '10-Feb-2010' AND TRUNC(SYSDATE)
      AND c.CUST_ID = e.CUST_ID
      GROUP BY c.CUST_ID
    UNION
      (SELECT c.CUST_ID
      FROM CUST c,
        note n
      WHERE c.SALES_ID = 1163
      AND n.CREATED_DTE_TME BETWEEN '10-Feb-2010' AND TRUNC(SYSDATE)
      AND n.note_type_id IN (1,3,4)
      AND c.CUST_ID   = n.pk_id
      AND n.table_name    = 'CUST'
      GROUP BY c.CUST_ID
    AND CUST.ssn           IS NOT NULL
    AND CUST.DCEASED_DTE IS NULL
    {code}
    Any guidance is appreciated!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    It’s not problem with SET operator. while you are using date field in where clause, U must use date conversion function, otherwise it will stuck there
    Here is the right sql, U can try with this
    SELECT cust.cust_id, ssn, f_name, l_name, created_dte_tme, ttl_assets,
    brnch_id, sales_id, bdte, ssn_typ, fullname, home_brnch_id,
    no_mailings, no_calls, dceased_dte, ttl_assets_dte
    FROM cust
    WHERE sales_id = 1163
    AND cust.cust_id NOT IN (
    (SELECT cust_id
    FROM cust_info
    WHERE info_type_id = 32)
    UNION
    ((SELECT c.cust_id
    FROM cust c, event e
    WHERE c.sales_id = 1163
    AND e.eventdate BETWEEN to_date('10-Feb-2010','dd-mon-rrrr') AND TRUNC (SYSDATE)
    AND c.cust_id = e.cust_id
    GROUP BY c.cust_id)
    UNION
    (SELECT c.cust_id
    FROM cust c, note n
    WHERE c.sales_id = 1163
    AND n.created_dte_tme BETWEEN to_date('10-Feb-2010','dd-mon-rrrr') AND TRUNC
    (SYSDATE)
    AND n.note_type_id IN (1, 3, 4)
    AND c.cust_id = n.pk_id
    AND n.table_name = 'CUST'
    GROUP BY c.cust_id)))
    AND cust.ssn IS NOT NULL
    AND cust.dceased_dte IS NULL;

  • Timeout problems with Webservices

    Hi,
    I'm facing problems with the timeout parameter("weblogic.webservice.rpc.timeoutsecs"). It seems that the timeout is not working and i got stuck threads in my Weblogic Queue.
    has anyone benn through a similar situation?
    Thanks in Advance
    Erick Akamine

    System.setProperty("weblogic.webservice.UseWebLogicURLStreamHandler","true");
    // create a call instance
    ((weblogic.webservice.core.rpc.CallImpl) myCallInstance).setProperty("weblogic.webservice.rpc.timeoutsecs", "1");
    //check the parameters names
    ((weblogic.webservice.core.rpc.CallImpl) myCallInstance).getParameterNames();

  • Session Timeout - 30 minutes

    Hello,
    I have a problem with session timeouts @ P7.2 - session least only for 30 minutes.
    Although I've been playing with domain.xml a lot, I haven't succeeded
    It is SP7.2 installed @ Sun App.Server 9
    Thanks for help.

    He is right, session timeout is handle by AM. It is located under Configuration --> Global Properties --> Session --> Dynamic Attributes --> Maximum Idle Time

  • Setting timeout property in java client using corba

    Hi all,
    We are facing a problem regarding corba timeout. We have a java based client (jdk 1.5), which connects to a cpp server using corba. Now we want to set a timeout at client side if some call takes a long to come back (due to TCP/IP connection problem or any other reason). We are using borland's visibroker and implemented their 'RelativeRequestTimeoutPolicy' policy but it gives an exception like this : org.omg.CORBA.PolicyError: There is no PolicyFactory Registered for type 31
    I have searched this forum for the same but could not find any particular solution or may be I was unable to find that. Can anyone please help regarding this issue? Is there any SUN specified property that can be used? What is the use of 'com.sun.CORBA.transport.ORBTCPReadTimeouts'? Can anyone help?.

    Hi ,
    I am getting the same exception org.omg.CORBA.PolicyError: There is no PolicyFactory Registered for type 31
    at com.sun.corba.se.internal.Interceptors.PIORB.create_policy
    Below is source code :
    long relative_expiry = 30L * 10000000L; // 30 seconds
    Any relative_request_timeout_value = orb.create_any();
    TimeTHelper.insert(relative_request_timeout_value,relative_expiry);
    Policy policies = orb.create_policy(org.omg.Messaging.RELATIVE_REQ_TIMEOUT_POLICY_TYPE.value,relative_request_timeout_value);
    PolicyManager orbManager = PolicyManagerHelper.narrow(
    orb.resolve_initial_references("ORBPolicyManager"));
    orbManager.set_policy_overrides(new Policy[] {policies},SetOverrideType.SET_OVERRIDE);
    Please let me know how the problem was resolved

  • ** Tomcat JSF App Timeout  ---HTTP Status 500 -could not be restored.

    ** Tomcat JSF App Timeout ---------------HTTP Status 500 -----javax.servlet.ServletException: viewId:/welcome.jsf - View /welcome.jsf could not be restored.
    Hi Guys,
    I have a JSF app running under Tomcat 6. It works great...fast and Stable...
    I have a problem with session timeouts..
    I get this error when I leave the browser open to a page and try to use any links..
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: viewId:/welcome.jsf - View /welcome.jsf could not be restored.
          javax.faces.webapp.FacesServlet.service(FacesServlet.java:270)
          org.ajax4jsf.webapp.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:154)
          org.ajax4jsf.webapp.BaseFilter.handleRequest(BaseFilter.java:265)
          org.ajax4jsf.webapp.BaseFilter.processUploadsAndHandleRequest(BaseFilter.java:376)
          org.ajax4jsf.webapp.BaseFilter.doFilter(BaseFilter.java:503)
    I have this in my web.xml
    <error-page>
    <error-code>500</error-code>
    <location>/error500.jsp</location>
    <error-code>404</error-code>
    <location>/error500.jsp</location>
    <error-code>400</error-code>
    <location>/error500.jsp</location>
    <error-code>403</error-code>
    <location>/error500.jsp</location>
    </error-page>Any help out there??
    Thanks
    Phil

    Thanks BalusC,
    I have added
    <error-page>
         <exception-type>javax.faces.application.ViewExpiredException</exception-type>
         <location>/errorTimeOut.jsp</location>
    </error-page>
    <error-page>
         <exception-type>java.lang.Exception</exception-type>
         <location>/errorTimeOut.jsp</location>
    </error-page>and
    <context-param>
            <param-name>com.sun.faces.enableRestoreView11Compatibility</param-name>
            <param-value>true</param-value>
    </context-param>It now seems to work without any timeout.
    Have a great weekend and thanks for your help again.
    Phil

  • Intermittent timeouts

    Hi guys,
    I am continuing the thread from here:
    Re: Race condition in htmldb_get.js
    since this is to treated as a separate issue.
    There are many errors like the following in the Apache error_log:
    [Thu Dec 14 20:18:01 2006] [error] [client 164.19.153.139] [ecid: 1166123881:10.153.159.47:29376:0:16586,0] File does not exist: /ag/oracle/appserv_1/Apache/Apache/htdocs/_vti_bin/owssvr.dll
    [Thu Dec 14 20:18:01 2006] [error] [client 164.19.153.139] [ecid: 1166123881:10.153.159.47:29527:0:15701,0] File does not exist: /ag/oracle/appserv_1/Apache/Apache/htdocs/MSOffice/cltreq.asp
    [Thu Dec 14 20:19:23 2006] [error] [client 164.32.1.238] [ecid: 1166123963:10.153.159.47:29527:0:15747,0] mod_plsql: /pls/apex/f HTTP-500 Error Reading Data from Client!!
    [Thu Dec 14 21:09:22 2006] [warn] [client 164.20.198.77] read request line timed out
    [Thu Dec 14 21:47:20 2006] [warn] [client 164.20.68.139] mod_plsql: Long running URL [pls/apex/wwv_flow.show] timed out
    [Thu Dec 14 21:47:20 2006] [error] [client 164.20.68.139] [ecid: 1166128938:10.153.159.47:29490:0:20969,0] mod_plsql: /pls/apex/wwv_flow.show HTTP-500 Error Reading Data from Client!!I receive the HTTP-500 around 600 times per day intermittently. We have 400,000 page views per day.
    It happens throughout the day at various times.
    Has anybody had similar problems?
    The timeouts in the Apache httpd.conf look good (300 seconds) . And the requests only take a second or two, at most a few seconds before they get aborted.
    Marvel.conf:
    Alias /i/ "/ag/oracle/appserver_1/apex/images/"
    <Directory "/ag/oracle/appserver_1/apex/images/">
         AllowOverride None
         Order allow,deny
         Allow from all
         <IfModule mod_expires.c>
          ExpiresActive on
          ExpiresDefault "access plus 1 hour"
         </IfModule>
    </Directory>
    AddType text/xml       xbl
    AddType text/x-component       htc
    <Location /pls/apex>
    Order deny,allow
    PlsqlDocumentPath docs
    AllowOverride None
    PlsqlDocumentProcedure      wwv_flow_file_manager.process_download
    PlsqlDatabaseConnectString  RAC_ODS TNSFormat
    PlsqlNLSLanguage            GERMAN_GERMANY.AL32UTF8
    PlsqlAuthenticationMode     Basic
    SetHandler                  pls_handler
    PlsqlDocumentTablename      wwv_flow_file_objects$
    PlsqlDatabaseUsername       APEX_PUBLIC_USER
    PlsqlDefaultPage            apex
    PlsqlDatabasePassword       <pwd for APEX_PUBLIC_USER>
    Allow from all
    </Location>Relevant parts of the http.conf:
    ServerType standalone
    Timeout 300
    KeepAlive off
    MaxKeepAliveRequests 100
    KeepAliveTimeout 15
    MinSpareServers 5
    MaxSpareServers 20
    StartServers 5
    MaxClients 350
    MaxRequestsPerChild 0
    ExtendedStatus On
    Port 80
    Listen 80
    UseCanonicalName On
    HostnameLookups Off
    LogLevel warnWe are running the two application servers (IAS 10.1.3) on a Redhat Linux box through a load balancer. The backend is an Oracle RAC 10.2.0.1 on Unix.
    Regards,
    ~Dietmar.

    Hi Eduardo,
    we could resolve the issue already a long time ago.
    I don't recall excactly, but our hosting provider (T-Systems) had to fix some configuration settings on the load balancer, I guess. The way the http requests were forwarded from the load balancer to the Oracle Internet Application Server was wrong.
    The error is what is says that it is. The client (aka the browser) stopped listening to the http connection because it was cut off for some reason. So perhaps your issue could be related to the forwarding of http requests from the load balancer to the http server OR perhaps a firewall might cut off some requests.
    You might give it a try to talk to a specific http server directly and see whether the requests get cut off or not.
    The bottom line: This problem should not occur is not related to either mod_plsql or APEX (in our case). You should look someplace else for the problem.
    Cheers and the best of luck,
    Dietmar.

  • ASA TCP Idle Connection Timeout Suspense

    Hello I upgraded our Cisco ASA 5520 with a Cisco ASA 5585. Though both ASA were configured with default TCP Idle Connection Timeout values people are now starting to complaint that idle SSH connections are being terminated. This is proper behavior but they were claiming it didn't occur with the old firewall. Our users are setting keepalives for 1800 seconds to get around this before I can bump the setting to infinite (setting 0). Is there a bug with the feature in older ASA OS?

    Hi,
    Before looking for a bug I would check the ASA logs (hopefully you are storing them to a separate Syslog server) and see why the connections are torn down (Teardown reason) and how long have they been on the ASAs connection table before they were torn down.
    You also have the option to perform traffic capture on the ASA for the traffic in question and confirm why or which party terminates the connection.
    I guess you can use the MPF on the ASA to configure separate idle timeouts for just these SSH Connections if you do not want to touch the global timeout values.
    I have not run into any problems with the timeout settings on the older softwares. In the newer softwares (8.3+) I have run into these problems. In those situation the ASA has not removed the connection that have reached the timeout value. I have seen connection that have been idle for over 1000h.
    - Jouni

  • Global User Inactivity Timeout still nto working at 9.0.4.2

    Applied patchset 9.0.4.2 fro 10GiAS, followed steps to switch timeout on (ran ssogito.sql,updated mod_osso.conf) but it still doesnt work! Our SSO repository is in a separate database to portal - does anyone know if there are any issues with this setup? I ran ssogito.sql against the SSO database only.
    thanks.

    Yes, i am having the same problem with the Timeout. No matter what i have the timeout set to, the portal never redirects to the login, the users stay logged in indefinitely. We are running 10gAS (10.1.2). I have a feeling it has something to do with the cookie not being properly set. If ANYONE has any experience with this please reply. thanks so much
    Steve

  • Timeout error when calling package

    Hi,
    I have an application that calls a package, this package has a process that lasts 40 minutes, 30 minutes with the browser displays the following error:
    Explanation: The request timed out before the page could be retrieved.
    Try the following:
    Refresh page: Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
    Check spelling: Check that you typed the Web page address correctly. The address may have been mistyped.
    Access from a link: If there is a link to the page you are looking for, try accessing the page from that link.
    Contact website: You may want to contact the website administrator to make sure the Web page still exists. You can do this by using the e-mail address or phone number listed on the website home page.
    If you are still unable to view the requested page, try contacting your administrator or Helpdesk.
    Technical Information (for support personnel)
    Error Code 64: Host not available
    Background: The gateway or proxy server lost connection to the Web server.
    Date: 07/01/2012 14:05:39 [GMT]
    Server: SVGFIRE.svgmatriz.local
    Source: Remote server In the application properties:
    Session Timeout
    Maximum Session Length in Seconds, is 0
    Maximum Session Idle Time in Seconds, is 0
    I'm using Firefox 9
    The same error occurs in Chrome.
    Do I have to mess around with settings Browser Timeout? Or is some configuration of Apex?
    thank you
    Márcio Gonçalez

    mag.goncalez wrote:
    Thanks for the tip fac586,
    using apex_plsql_job execution is ok.
    Just wanted to know if there is another way without using Job, since the problem is related to timeout.And Alex and I are trying to convince you that it's the wrong problem. The timeout doesn't affect the execution of the job. Once that has started on the database it's going to complete (successfully or not), regardless of whether the user sits staring at an unresponsive screen for 30 or 40 minutes and/or gets a timeout message. Given that, it makes sense to run it asynchronously in the background and avoid the possibility of a timeout. This lets the user get on with something else in their session.
    You can modify the package so that the job sends email or SMS messages reporting when it is complete (successfully or unsuccessfully); you can use <tt>apex_plsql_job.update_job_status</tt> or <tt>dbms_application_info.set_session_longops</tt> as a mechanism to provide feedback on progress somewhere in your application.

Maybe you are looking for