Problem in Change Office and communication Data

Hi all,
In ESS, where we have the Employee search, there is Who's Who and Change office and Communication Data.
We have added a new field "Mobile Telephone " in who's who list.But when we want to Change/Modify the Mobile number by goin to Change Office and Communication data , we are not getting that field there. How  can we make the changes?
Need help on this ..
Thnks in advance.
NR

Hi,
Did u get a solution for this. I am also having a similar problem.

Similar Messages

  • How to remove field in Change Office and Communication Data..

    Hi,
    In ESS->Emp Search -->Change office and communication Data..I have to remove a field "License Plate No" as we are not using it..
    How to do it..
    I have Netweaver studio installed in my pc but i dont know how to use it..
    could any one tell me the steps to do the above task in Netweaver Studio..or there is any other method that can be done..
    It would be great help for me..
    Thanks & Regards,
    Mahesh.M.R

    Hi ,
    I dont know why no one is replying to this question..
    Eagerly waiting for your valuable suggestions..
    Thanks & Regards,
    Mahesh.M.R

  • After changing batteries and up date my I Mac to 10.8.2, my BLUETOOTH disappear from my computer.  On the top line right corner the symbol says:  NOT AVAILLABLE, and the icon is not anymore int my computer's preference.  Anyone can help me here?

    After changing batteries and up date my I Mac to 10.8.2, my BLUETOOTH disappear from my computer.  On the top line right corner the symbol says:  NOT AVAILLABLE, and the icon is not anymore int my computer's preference.  Anyone can help me here?

    I've done it two or three time and I still have the same problem.  May be I do not do it properly so can you give me the right procedure.

  • Problem using Change production and SFC step status with Simultanious group

    Hello,
    We just upgraded to ME 5.2 SP5 patch which was released two days back, the problem with Simultanious group is fixed and SFC gets the correct next step as per defined in the router (Previously there was bug).
    But when we try to use change production and put SFC in simultanious router at some particular operation as que it is getting in que at all operations and really can be started and completed even at the last operation.
    Same is the case with step status if we put it in que at some intermediate operation all operation listed above are becoming in que irrespective of the flow defined in simultanious router.
    Please let me know how to handle this.
    Regards,
    Pushkar Patil

    Hi Pushkar,
    It seems to be a bug. I would suggest opening a ticket on this.
    Regards,
    Alex.

  • Problem with Create PDF and linked data

    Using Acrobat X standard.
    I have a Word 2010 doc with links to Visio and Excel data. 
    When using the CreatePDF option from Word, I consistently get a prompt asking whether I want to update the linked data before creating pdf.  I would like to either (1) turn this prompt off or (2) -- less preferable -- have the linked data always update without prompting.
    Is thre a setting that would accomplish one of these two solutions?
    Thanks,
    Craig
    PS.  All settings in Word have been set such that data IS NOT updated when printing on a regular printer.

    You can print to Adobe PDF.

  • Problem with SQL*Loader and different date formats in the same file

    DB: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    System: AIX 5.3.0.0
    Hello,
    I'm using SQL*Loader to import semi-colon separated values into a table. The files are delivered to us by a data provider who concatenates data from different sources and this results in us having different date formats within the same file. For example:
    ...;2010-12-31;22/11/1932;...
    I load this data using the following lines in the control file:
    EXECUTIONDATE1     TIMESTAMP     NULLIF EXECUTIONDATE1=BLANKS     "TO_DATE(:EXECUTIONDATE1, 'YYYY-MM-DD')",
    DELDOB          TIMESTAMP     NULLIF DELDOB=BLANKS          "TO_DATE(:DELDOB, 'DD/MM/YYYY')",
    The relevant NLS parameters:
    NLS_LANGUAGE=FRENCH
    NLS_DATE_FORMAT=DD/MM/RR
    NLS_DATE_LANGUAGE=FRENCH
    If I load this file as is the values loaded into the table are 31 dec 2010 and 22 nov *2032*, aven though the years are on 4 digits. If I change the NLS_DATE_FORMAT to DD/MM/YYYY then the second date value will be loaded correctly, but the first value will be loaded as 31 dec *2020* !!
    How can I get both date values to load correctly?
    Thanks!
    Sylvain

    This is very strange, after running a few tests I realized that if the year is 19XX then it will get loaded as 2019, and if it is 20XX then it will be 2020. I'm guessing it may have something to do with certain env variables that aren't set up properly because I'm fairly sure my SQL*Loader control file is correct... I'll run more tests :-(

  • How change sStart and End Date and time in the Audit log ???

    Install C2S BM39SP1. Work.
    Go to the: https://bmserver:8009
    Open : VPN Monitor | Audit log information.
    Problem - can not cahnge Date and time in the Audit Log Start(End)
    How i vcan do this ?
    How i can get every day stat log:
    login ; date_time_login ; dtae_timie_logout ; bite_in ; bite_out
    Serg

    Serg,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Problem with changing calenders and reminders colors

    Hello,
    Somehow the colors of my two of four calendar just changed them self. I've four calendar:
    Day Off (mark in yellow), Home (mark as purple), Work (mark as blue) and School (mark in green).
    The two calendar of Home and Work swap their color so Home is mark in blue and Work as purple.
    I've tried to change it colors many time, tried difference ones two but it keep turning back. Only this two calendar infected.
    Same problem in reminder. it keep turning orange from purple.
    All attemps in iPhone and in iCloud.com failed.
    Appreciate help.

    even "increment and decrement" buttons of JScrollbar are getting updated with "Button.background" colorWhen you invoke the updateComponentTreeUI() method I believe the code updates the properties of components that use the UIResource interface. The default Colors for components use the ColorUIResource class. See [url http://www.camick.com/java/blog.html?name=uimanager-defaults]UIManager Defaults.
    So to prevent a component from being changed you need to replace the ColorUIResource with a Color class for the buttons in question.
    You might be able to use Darryl's [url http://www.camick.com/java/blog.html?name=swing-utils]Swing Utils class. You can use the class to get all the JButton components used by the scrollbar. Then for each button you could replace the background by using code like:
    button.setBackground( new Color(button.getBackground().getRGB(), true) );

  • Change created and modified date

    Hi everybody,
    I've setup a Sharepoint 2010 server and created a site to replace an existing one, from SP2007.
    In this new site, I'm copying over files from the old SP2007, the problem is when I copy the files, the create/modify infos, are with my name.
    I know it's possible to change these values for an entire list but how would, I go and change the value for each of the files individually in the list?  By using Powershell.
    Thank you in advance for your help (hope I posted in the right newsgroup).

    Alternatively, use a 3rd party tool like Metalogix ContentMatrix which is free up to a point - http://www.metalogix.com/Products/Content-Matrix.aspx.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Aggregates with Attribute Change Run and Master data

    Hi !
    I created Aggregate which includes Master Data such as Customer , Customer Number , Material , Material Number.....
    It also contains navigational attribute and hierarchy...
    Now we all know that if Master data and Hierarchy changes frequently(or some new values are added or new attributes are added etc.) we want to see the respective change in Aggregates too
    So just Rolling up aggregate will not help.
    We need to apply Attribute Change run for this purpose, to aggregates..
    Now the question is HOW TO  APPLY ATTRIBUTE CHANGE RUN to aggregates?
    How to automate this process with Process chains..?
    If i create Aggregate on Master Data CUSTOMER NO., DOES IT AUTOMATICALLY INCLUDE THAT AGGREGATE IN ATTRIBUTE CHANGE RUN FOR THAT CUSTOMER NO. PROCESS CHAINS ?   Yes or No..........
    (What i mean to say is if there is Attribute Change Run for Customer No. and if this is in Process chains specially created for Customer Number , than as aggregates are created on  Customer No., does i t automatically applies and make changes to Aggregate too, or do we hvae to create special process chian for it ?)
    Please reply asap ? its urgent

    hi,
    check these links for attribute change run
    What's the attribute change run? and the common sequence of a process chain
    http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a67ece07211d2acb80000e829fbfe/content.htm
    regards
    harikrishna N

  • How to remove Fields from Change Office & communication Data..

    Hi,
    In ESS->Emp Search -->Change office and communication Data..I have to remove a field "License Plate No" as we are not using it..
    How to do it..
    I have Netweaver studio installed in my pc but i dont know how to use it..
    could any one tell me the steps to do the above task in Netweaver Studio..or there is any other method that can be done..
    It would be great help for me..
    Thanks & Regards,
    Mahesh.M.R

    Hi Ashutosh,
    Thanks for the reply..
    I am using web Dynpro Version..ie ERP 2004 ESS 60.2.
    Appreciate if you can provide me the solution..
    Thanks & Regards,
    Mahesh.M.R

  • Wifi and mobile data problems

    Hello
    I am reporting a problem regarding the wifi and mobile data on my Xperia Z1. Whenever I lock my phone, the wifi and mobile data keeps turning on by itself again and again. I have tried to turning the "automatic turn on wifi when sleep" to "never" but it keeps turning "always" whenever I lock my phone, so does the mobile data. I look forward to some replies.
    Sincerely

    Hi @Nick2510 I suggest you to first run a backup of the device information like this: http://talk.sonymobile.com/t5/FAQ/Backup-amp-Transfer/m-p/407253#U407253 Try performing a system repair using PC Companion: http://support.sonymobile.com/gb/tools/pc-companion/ This will factory reset your phone and erase all data. You might need tocharge your device for about 1-2 hours before so the device has at least 80% battery. Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device). Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process. If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose
    Windows 7 or XP. I hope can be useful. I'm at disposal for any question. Best Regards,

  • Problem removing Diagnostic and Usage Data Log

    I have had several iPod crashes and ironically that's not my problem. The problem is the Diagnostic and Usage Data log is getting larger and larger. I have my iPod Touch 4th Gen. set to not send reports to Apple and I do no see any way to delete or editing it. Is there a way to delete the  log or remove some of its lines of reports or dose it have to be sent to Apple to remove it?

    I may be a little rusty on the rules here but I didn't think hijacking a thread was not aloud. If it was me I would have started my own thread instead of taking the original question in a different direction. Just sayin.
    We I was looking for my answer I found yours.
    http://support.apple.com/kb/HT2534

  • Way to Copy Doc,Due and Posting Date from Sale Document to Other Sale Doc

    Hey SAP B1 Community,
                                  Most of the users facing Problems When they create Sale Order and then want to create Del and Invoice Doc. They have to Change Doc and Del Date, There is solution to avoid to write  dates again.
    First Create UDF with the name ie "DDate", in DDate udf write FMS which get the Date From $[ORDR.DocDate]
    in Del and Invoice Form Create FMS for Del and Document Date which get Value form UDF "DDate"
    It ll decrease the time to Post Del and Invoice.
    Rahil Hassan
    0300-4655753

    this method is to avoid current date
    when
    they use "Copy to" Delivery and then Copy to Invoice the system fills

  • How to reduce reading and recording data time/ Visual C++, PCI 6024E and PCI-MIO-16E?

    Right now I am working on a data communication programme. The time of reading digital signal and recording data is more than I expected, which is about 100 microsecond. I need to reduce the time. The software I am using is Visual C++ 6.0. I use two DAQ boards, which are PCI-6024E and PCI-MIO-16E. I have set the priority of Visual C++ to be realtime by task manager. The operating systme is Windows XP.
    I am wondering how to set the interrupt of reading or writing data to be the highest and stop any other kind of interrupt.
    Thanks in advance!

    The primary limitation you will encounter when trying to do high speed
    digital I/O using your E-Series hardware is that the digital lines are
    all software timed.  This means that for each and every digital
    read it is necessary for your software to issue a command to your
    hardware, read a single point, then receive the response from the
    board.  This prevents you from performing digital operations at
    very high speed.  In general, I would say that 100 microseconds is
    a very good response using software-timed digital I/O on a Windows
    computer.
    It is difficult to make a good recommendation without more detail about
    what you are trying to do.  You may need to consider switching to
    a Real-Time operating system, or upgrading your DAQ hardware to a board
    that will allow you to time your digital acquisitions on the board
    itself.  These devices, such as the m-Series DAQ or the PCI-653x
    series, would allow you to use hardware triggers for your digital
    acquisitions, change detection, and buffered data acquisitions to
    reduce the software overhead involved in a rapid acquisition.

Maybe you are looking for