Problem in CIF Inbound Queue
Hello Every1,
When I try to process the CIF inbound queue (APO system) it says the logical system is not found. But when I check in the table TRFCQIN and TRFCQSTATE the logical system has assigned properly. So please let me know how to rectify this.
Thanks,
Siva.
Hello Chinni,
Master data cannot be reconciled using Delta Report. It is only for transaction data. If you are still having problem transferring inforecords - first check if the location product combinations used in the inforecord exist in APO.
Next follow these steps:
0. Make sure there are no error CIF queues inboudn to APO
1. Do you have an active integration model with the inforecord and still the procurement relationship is not created in APO? If so then exclude the particular inforecord (by document number) from the integration model.
2. Generate it and activate it.
3. Then generate the integration model again without the exclusion and activate this model. This will force sending the inforecord to APO.
4. See what is the error coming and send the details.
Thanks,
Somnath
Similar Messages
-
Hi,
I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
Thanks.
Regards
MansiHi Mansi,
Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
Regards,
R.Brahmankar -
Hi Guru's,
I am still having problems with my inbound queue on the SRM system. The scenario is that XI sends a message to the SRM system, the messages comes in the queue of the SRM system but needs to be manually be processed.
What tried to do is to use the transaction sxmb_adm and registered and actived all queue's, still now luck. How can I fix this?
Hope some can help me out.
Best regards,
Guido KoopmannHi Guido
Go tcode "sxmb_adm" -> integration engine configuration.
You will find Destination there.
Go to tcode SM59 find whether that destination is working fine or not
Register the queues via t.code sxmb_adm where u have an option manage ques.
Once you register the queues, they default activated.
If u want to manually unlock then u need to go to transaction SMQR,SMQ1,SMQ2 for queue management. There u have to select the queue and activated all entries.
SMQ1 u2013 qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
SMQ2 u2013 qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
U may schedule the report RSQOWKEX (Outbound Queues) and RSQIWKEX (Inbound Queues) to restart the queues automatically.
To Cancel the messages from MONI with the Status Scheduled for Outbound Process
Schedule the Report RSXMB_CHECK_MSG_QUEUE
SAP_BC_XMB_DELETE
Regards
Abhishek -
XI 2.0 Inbound Queue Sysfail problem
I am having a problem where my xml message is causing the 'xbtoljul' inbound queue to stop. Within the queue I can see a message with the StatusText of "XI message queue stopped due to internal error". Does anyone have a good suggestion for understanding how or why this message is in this state? Looking at the message using 'sxi_monitor' it looks ok, no errors or exceptions.
I'm having the issue. Did you ever get this resolved
-
Problem Inbound Queue SMQR after execute BUPA_DEL
Good Day
Now, we developing a interface for a customer to import Business Partner (BP) from a non-SAP System in our SAP CRM 2007 System. To validate the functionality of the interface we would like to make any test imports. Well, if we finished an import we have to delete the BP's with the transaction BUPA_DEL. The deletion of the BP's in the table BUT000 seems to be ok.
So, when I call the transaction smqr to check the Inbound Queue CSA*, I will found an entry with the state "Retry" for every deleted dataset. I can manually execute the Queue successfully. What could be the reason for this state? How can I automate the execution of these queues?
Many thanks for your support!
Regards
MarcoDear Gerhard
Thank you for your answer.
Well, I had already implement the solution of the note 785046 without success.
The clue is, no Background-Job is scheduled but there are many thousend Entry's with the state RETRY in the Queue...
In the SysLog I couldn't found any messages they indicate to this "problem".
Do you have any idea's.
Can I manually schedule a Job (may be periodically) to process these Queues?
Thank's for your replies!
Best regards,
Marco -
File to ABAP Proxy (problem with inbound queues in R3)
Hi,
In File-XI-ABAP proxy scenario, XI is successfully picking up file and sending it to R3.
But in R3, an inbound queue is created in SMQ2 transaction code and I solved the same to automatically process the Queue by registering that in SMQR transaction code. But even though the inbound queue doesn't appear in SMQ2 (which means that it is processed successfully) it doesn't call the method EXECUTE_ASYNCHRONOUS. Can anyone help me whether I need to do any settings to run that method?
Also can anyone help me, after the inbound queue is successfully processed in SMQ2 transaction, what would be the next step to watch what exactly that queue has done?Hi,
Please check the program code for Server ABAP proxy.
This will show you the trigerring of Proxy on inbound side.
ABAP Proxy inbound program - sales order creation - Community Profiles - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
For Queues, you can go to SMQR and check for the register queue. Select and double click on it. If anything is stuck up then you can see in it. Even same with SMQ2
Thanks
swarup -
Hi Experts,
I have been monitoring the SAP SRM system and in the Inbound Queue (SMQ2) I find queues with entries ended with:
StatusText: Exception condition "GUID_FOR_LOGSYS_CHANGED"
This caused the queues to end with status: SYSFAIL.
Please guide me on this.
Thanks.
SudhakarHi,
Is it new system or copied client ?
Please check the GUID value in CRMMLSGUID-R3_GUID (SRM side) and CRMPRLS-R3_GUID (ERP side).
If you have some old value you can delete the record.
Regards,
Masa -
Hi All,
I am replicating Product Listings (VB02 in ECC) data from ECC to CRM.
Now I need to Update a Z table in CRM System with the data coming from ECC when the Inbound Queue in CRM System is processed via SMQ2.
Can Anybody please tell me what BADI will be useful
I found one CRM_DATAEXCHG_BADI but not sure how it goes.
I also tried in Debuging the inbound Queue. It will take Long time to find out BTE or BADI in this way.
So please help me with the BADI or BTE Name.
Thanks
VenkatHi Gautham,
No good, It did not help me Gautham.
Can you please suggest me some other way of dong it.
I have 2 badis to use one is address_update and the other is addres_check.
I implemented address_check which had a address structure as a changing parameter and I update it there, it works absolutely fine.
But my requirement is to update the structure based on the condition of BUT000. That is the BUT000-type, which means I need to update the structure only for person and not for organization and group.
so in the badi address_check i need the BUT000 details, which I am not able to trace even from the local memory as I am getting the error saying "Memory is not yet instantiated"
and If i use the other badi address_update.
I have the problem the other way round here. I have all the BUT000 details here I can put the condition to update only for person, but I am not able to update the address structure.
Please help me. This is required very urgent.
Maximum points will be rewarded.
Thanks in advance.
Arul. -
Hello Guru,
May am trying to CIF and activate a plant from R/3 to APO via, doing in R/3 rimodgen and rimodac the result in APO is error in SMQ2 (Inbound queue) saying ::023 XXXX Production Plant, or message no. Message no. SR053
Hope you can help me resolve this APO error.
ThanksTotchiki,
Pretty self explanatory. The address that is moved over with the plant contains basic configuration data that does not exist in your SCM system.
Configuration of Regions in SCM are found at OVK2. Configuration for Regions in ERP are found in the same transaction. Ideally, you would like these two to be identical for both systems. At a bare minimum, though, the regions that are contained in every address transferred across to SCM must exist in the SCM configuration. Add the regions to SCM that the error messages tell you are undefined.
Best Regards,
DB49 -
Messages in inbound queue in status-RUNNING and it is too slow
Hi Experts,
We have a issue there are tons of messages in inbound queue in status-RUNNING and it is too slow!, hence there are more messages getting in the queue every minute.
This is Production enviorment.
We have priority queues
QIN is waiting status.
De-register will not work due to loss of messages fear
Please advice
thanks and regards,
krushiHi,
If the queues are hanging due to peak load at sometimes
you can schedule following reports to restart them automatically
(dont have to lock and unlock manually)
RSQIWKEX - Inbound Queues
RSQOWKEX- Outbound Queues
Also you can save the first entry of the queue if its causing problems to process later- smq3
thanks
francis -
Inbound-Queue - Set Queue To Retry via Coding
Hello Experts,
I am just implementing a MEP-Scenario and facing a problem in timing.
Because of Missing Data delivered via RFC from other system i need to set an inbound-queue (R3AD...) to waiting and retry.
Is it possible to do this via coding?
When I fire an error message (type EAX) the queue gets in status "SYSFAIL" - but in this case it will not automatically retry again.
Any hints are appreciated.
Thanks
MarioHi ,
You can deregister the inbound queue R3AD* from SMQR tcode and the other way is You can write a program to start the inbound queue processing which has a status 'SYS-FAIL'.
Thank you,
Gangadhar.S -
CREMDM splitted by PI, ADRMAS gets posted, CREMAS in inbound queue
Hi all,
I am on SAP MDM 7.1 SP03, SAP PI and SAP ECC6.
I have gone thorugh all the threads and Guides related to MDM but couldn't find a valid solution for my problem described below. However, I did find some tricks and tweaking which I dont want to use as they are not recommended by SAP.
We syndicated NEW Vendor records being created in MDM using CREMDM with standard Syndication Map. We have Vendors number generated in MDM and the number range being used exists in ECC and is marked as external. Moreover, the number range uses all of 10 digits, so there is no question of Conversion Routines with it. We deployed PI for splitting CREMDM to ADRMAS and CREMAS. We have serialized ADRMAS to go before CREMAS. We have assured that fields common between these two, have "no data" character i.e. "/" in CREMAS with correct data in ADRMAS. And ADDR_GROUP is mapped as "BP".
Now the problem is, ADRMAS gets posted but CREMAS remains in the inbound queue. The queue running but still CREMAS remains there with CODE as "75". This results in non-creation od Vendor master record as CREMAS is not posted.
Can anybody help with this. I really appreciate the support.Hi R,
The ALE inbound function modules treat each IDoc segment as a current set of data. Missing fields (or fields that have no data) are interpreted as a value deletion. To keep the existing value for a single field, you have to add a no-data sign as field value for NAME_1. This no-data sign is a single slash (/).
Please execute the inbound function module manually in WE19 to test this. If an exception is seen at NAME_1 ,pass a value or '/' and check for successful posting of Idoc.
If this works, modify inputs to CREMAS accordingly.
In addition a good SAP Note 1052964 - MDM: Distribution of Business Partners, Customers, Vendors for your reference.
Regards,
Vinay M.S -
Msgs getting stucked in inbound queue
Hi All,
I am doing a jdbc- xi - ABAP proxy scenario. Data is coming into the R/3 via proxy but getting stucked up in inbound queue. When I go to the queue I can find entries with msg transaction recorded. When I manually execute the entry from the queue it is getting executed successfully.
In R/3 the msgs are with a green flag(scheduled). But when i execute it from inside the queue, I can see the success flag(chequered) one.
Why am I getting this problem?
Kindly help me debug this issue.
Thanks & Regards,
Jai Shankar.
Message was edited by: Jai ShankarHi,
Pls make sure your queues are registered and active...
you can register the queues using the SXMB_ADM transaction and executing the link "Manage Queues" in that.
Thanks,
Renjith -
Inbound Queues stuck with RFC errors
Hi Experts,
Greetings for the Day !
We have BDOC related issue and we need your expert help ASAP in resolving the same.
We ahev a few BDOCS lying in intermediate state in transaction SMW01, which we found using BDOC monitoring on daily basis. When we check the same in SMQR - inbound queue, we found that the queues are stuck with an RFC error message.
We are re-activate these queues to actually resolve the intermediate bdocs. But, my query is
1> The raeson for getting these BDOCS in intermediate state & stuck queues
2> A permanent resolution for the same.
Please help and let us know if you need more details.
Regards,
KanikaHi Kanika,
RFC error can be due to a bad connection as well. If the server is down, there might be a problem in communication with the connected system and the queues will not be processed further. You need to reactivate or unlock to get the queues processed.
But if there are any specific errors for which the queues are stuck do state the same, so that we can look into an actual resolution.
Regards,
Venkat -
Materials replication and R3PRODSTYP - SYSFAIL in inbound queues
Hi,
We are using SRM 7.0 and we have a problem in materials replication. In inbound queues we have the status SYSFAIL and the following error:
R3A* Error in Mapping (Details: transaction SMW01)
In SW01 the error messages are: u201CDownload inicial material: Table not supported by functionu201D and u201CCategory for material type MAT_Z001 does not existu201D
We did the initial download of DNL_CUST_PROD1 and the materialu2019s group corresponding to R3MATCLASS were replicated successfully. However 2 product subtype, corresponding to R3PRODSTYP, were not replicated.
Thus, the materials are not being replicated.
Do you have any ideas?
Thanks in advance,
Best regards,
ANWe already did the initial download of DNL_CUST_PROD0, DNL_CUST_PROD1, MATERIAL...
The problem is that there are two material types that at this time donu2019t exist in R/3 and when we do the material download those material types are trying to be replicated...
Any help?
Thanks!
Best Regards,
AN
Maybe you are looking for
-
Satellite U400-22n and Win7 - screen hangs after 5 min
Hi, This is my first post Ive purchased a new U400 with Vista preinstalled, last week ; 2 days ago Ive upgraded to windows 7 32bit professional when I stared Installing it windows prompted me that it requires a full installation , so I done a normal
-
List "View" with current time in column
Hi. I know that list view does not support fields calculated on page load. But I have to realize such functionality. Can someone provide options for realizing this? "Hack" some internal SQL query, inject JS on a view page, use .NET code somehow? Usin
-
Every time I launch Acrobat (version 9.5) it crashes with a run time error. If I then immediately relaunch it works. Tried reinstalling but this has not solved the issue. Thanks
-
8.02 updater not installing
Hello experts. I have successfully downloaded and installed the v8.02 updater to my fixed PC. Works great. However, I have also tried to download/install to my laptop, to no avail. The installation goes through the motions, but when I open DW, 8.0 is
-
GetAppletContext().showDocument() won't show local files for some people
Hi, I have a reporting function that creates a pdf and stores on the users computer in the local temp drive and then displays the created pdf in a new browser window. Everything works fine except for some users it won't show local files. This is a si