Problem in Combo chart columns and line

I select chart type is  combo in my vc model  and select data series is columns and line.
I define 5 series in the chart.
once i deployed the model the output shows the columns are overwrite in stacked position.
eg:
series 1: 10%
series 2: 20%
series 3: 45%
series 4: 25%
series 5 is line type
but in the chart the only one column will display,its top value 45% and itself shows 10% and 20% in different color.Don't show the 25% value on that column.
How to display the chart columns in clustered type in combo chart.
thanks in advance
Aravind.S

Hi
When you select 'Combo Chart' you will not get options for 'Stacked or Clustered'. By default it will be 'Stacked' chart only. Combo charts are generally used for less number of data series. Normally these charts are best suitable for 2 Data series only.
Still in your case is there any reason to use 'Combo Chart'? Consider following points -
1. If you want to use this type of chart then selction of 'Columns + Line' will be difficult because it will treat only 'Last Data Series' as line & all others will be columns & what you said problem will appear.
2. Instead of that select 'Column + Lines', so that only first 'Data series' will be column & rest all will be 'Lines'. So that you will get better visibility in that graph.
I think this will help you, If you have nay problem let me know.
Regards
Sandeep

Similar Messages

  • Chart missing Columns and Lines

    I have created a Column Line Chart and allow the user to input different values that change formulas to produce the columns and line on the graph. I can see the graph perfectly fine with all columns and the line on the canvas view. Whenever I try to export to any file type, upon opening the file, all but two of the columns are missing and the line is missing in all spots except for at two points.
    I've noticed that if I remove my formulas from my spreadsheet and just put in hard coded values in place of the formulas, the report populates correctly, but this takes away all functionality of allowing the user to adjust inputs, which is the entire reason we are using this software.
    Please advise how I can fix this issue so that my chart shows all data.
    Thanks,
    Dan

    Hi Dan
    This is common - this can happen due to possible reasons like
    1) The data in preview mode on which the formula is applied is not same as the hard coded or the one in design mode. So when you go to preview its different view in the chart
    2) Some other component is messing with the excel ranges you are using for formula for the chart - some components which can drop values as per their destination property.
    This is how you need to test
    - Add a test spreadsheet table component ( from selector category) and map all the cells that's included in the formula - the original range, the input values from the user interaction, and the final ranges with formula and the range to which chart is mapped to if different from the formula range.
    - Preview the dashboard and see whats going on in those cells and if they all are behaving as expected.
    - if the original data range and the input data are what you anticipate and not changed by any other variable you are not considering.
    Use more than one spreadsheet table if the ranges I suggested are not contiguous.
    Please try the above and post the updates.
    Thanks
    Runali

  • Xcelsius Drill Down With Column and Line Chart

    Hi Guys,
    I am working on an Xcelsius 2008 Dashboard. I would like to integrate two charts, a column and a line chart. The column chart is supposed to show the results for each quarter. With a selector it changes the view and name of the different numbers.
    Then I would like to enable the drill down so that I can see the results for the three months of the corresponding quarter in the line chart. Is that somehow possible? I am totally lost. Thanks for your help.
    Kind Regards,
    Maurice

    Hi Maurice,
    You cannot integrate a column chart and line chart to make drill down possible. You could drill down a column chart to show the values in another chart bt that would be just two different charts and not an integrated one.
    Regrads,
    Anju Saseendran

  • Charts (bar and line) in a tablix

    Hi, I need to do this:
    As you can see the bar graphic is inside the tablix (this is an excel sample btw), I found
    this tutorial and it really helped me, the problem is the line chart (this
    one was good too), in my report looks like this
    How can I make the lines appear between each marker?

    Hi mnjogin,
    How did you manage to combine bar and line into one graph?
    Pls advice.
    Thanks!

  • Combining Column and Line charts

    I'm trying to put together a composite graph, consisting of
    both LineSeries and Column Series, for a financial page. I'm
    rendering the entire graph inside of a ColumnChart. However, when
    multiple points for the lineseries are close together, the
    mouse-over only displays a single dataTip. When working in a
    LineChart, multiple dataTips are displayed for any points close
    together or on top of each other; is there any (preferably simple!)
    way to replicate that functionality in a ColumnChart?
    Thanks!

    And to make it even more fun, I just know discovered that
    interpolateValues="false" does not seem to function properly within
    a columnChart. Does anyone know a workaround for this
    problem?

  • Problems with combo KT3 ARU and GeForce 4?

    Have been using GeForce 2MX with driver 30.82 w/out problems. When istalling ASUS  ;(  V8440, a GeForce 4 with Ti 4400 my screen goes bananas. Gets strange patterns even at BIOS startup. Hangs in WinXP. Starts in Safe-mode but still with strange patterns.
    Heard rumors  ?(  that the problem might lie in the combo VIA and nVidia?
    Have given up on the GeForce 4 unless someone can give me a hint of what might be wrong.
    KT3 ARU w/2100XP/256 RAM (PC2700)/350W Pwrsupp.

    Quote
    What drivers are you using for the GeForce 4? Quote
    Using nVidia 30.82, and yes, the mascine runs in safe mode (occationally), but with patterns. Usually grouped like this:
    __    __    __    __   __ etc...
    A guy at a local PC-store said something about it when I explained my problem. He had no solution and might be wrong.
    Bernt

  • Automatic Colour settings problem for WAD Chart Column type

    Hi,
    In WAD (BI 7.0) Chart Creation i am having issues with colour settings for Chart item Column type with 3D. I have six key fig in query i am trying to show all KF in Chart. But it is showing only one colour for all keyfigs. atlast  I have manually assigned different colours for different series, but no use... the issue remains same.. Please help me on this issue
    Thanks in Advance
    Regards
    Harsh

    Hi Harsh,
    Please try the following options.
    1. Try swapping the axes. Certain charts follow the YX convention.
    2. Right Click > Edit > Click on 'Refine' > Click on the chart type on the right frame (Bars/Pie etc) > [OK] Vary Category by Color: Enable this checkbox.
    3. If you have finished with these settings, you may switch back to Wizard mode to follow up the settings (Step 3 of 6 - Value Properties)
    4. Under Categories in Wizard, just make sure you are giving options to suit all the Categories in an uniform fashion. To begin with don't bother to give a fixed Category Count. (As your chart size may increase dynamically based on GRID data)
    5. Goto Refine > Click on Global Settings > Choose 'Color Palette' > Tradeshow/Enjoy/StreamLine/Custom : These are the optional themes which may be well adjusted to suit your requirements.
    Thanks,
    Arun Bala

  • Problem in showing multiple columns and rows in horizontal wrap as like as

    I am trying to implement the ListView in my application as like as in windows.
    But i am able to show single row by this code snippet.
    What should i do to show  the multiple row ,multiple coloumns in JList.
    import javax.swing.*;
    import java.awt.*;
    import javax.swing.event.ListSelectionEvent;
    import javax.swing.event.ListSelectionListener;
    public class JListExample extends JFrame
        private class Value
            Value(String value, Icon image)
                this.value = value;
                this.image = image;
            String value;
            Icon image;
        private Icon getIcon(String name)
            return new ImageIcon(name);
        public JListExample()
            super("Simple JList Example");
            setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            final Value[] VALUES =
                new Value("the road", getIcon("10.jpg")),
                new Value("trees",  getIcon("11.jpg")),
                new Value("stooges",  getIcon("12.jpg")),
                new Value("bauld tires",  getIcon("13.jpg")),
                new Value("bvot tires",  getIcon("14.jpg")),
                new Value("volt tires",  getIcon("15.jpg")),
                new Value("send tires",  getIcon("17.jpg")),
            JList list = new JList(VALUES);
            list.setLayoutOrientation(JList.HORIZONTAL_WRAP);
            list.setVisibleRowCount(1);
            list.setCellRenderer(new SimpleCellRenderer());
            list.addListSelectionListener(new ListSelectionListener() {
            public void valueChanged(ListSelectionEvent evt) {
                if (evt.getValueIsAdjusting())
                return;
                System.out.println("Selected from " + evt.getFirstIndex()
                    + " to " + evt.getLastIndex());
            JScrollPane ListViewer = new JScrollPane(list);
            getContentPane().add(ListViewer);
            setBounds(0,0,600,600);
            //pack();
        public static void main(String[] args)
            try
                new JListExample().setVisible(true);
            catch (Exception e)
                e.printStackTrace(System.out);
        class SimpleCellRenderer extends JLabel implements ListCellRenderer
            public SimpleCellRenderer()
                setOpaque(true);
            public Component getListCellRendererComponent(JList list, Object value, int index, boolean isSelected, boolean cellHasFocus)
                Value val = (Value)value;
                setText(val.value);
                setIcon(val.image);
                //setBackground(isSelected ? Color.red : (index & 1)  ==0 ?                 Color.cyan : Color.green);
                //setForeground(isSelected ? Color.white : Color.black);
                return this;
    }

    I know this is an old topic, but I found the solution and thought I'd share it! By default, a JList only has 1 visible row. To allow the number of rows to expand dynamically, throw this in.
    this.imageList.setVisibleRowCount(-1);My code looks like this. It centers each image and centers the text under the image and wraps images horizontally.
        ListCellRenderer renderer = new ImageListCellRenderer();
        this.imageList.setCellRenderer(renderer);
        DefaultListModel listModel = new DefaultListModel();
        this.imageList.setVisibleRowCount(-1);
        this.imageList.setLayoutOrientation(JList.HORIZONTAL_WRAP);
        this.imageList.setModel(listModel);and the renderer
    public class ImageListCellRenderer extends DefaultListCellRenderer { 
      public Component getListCellRendererComponent(JList list, Object value, int
          index, boolean isSelected, boolean hasFocus) {
        JLabel label = (JLabel)super.getListCellRendererComponent(list, value,
            index, isSelected, hasFocus);
        if (value instanceof File) {
          File imageFile = (File)value;
          String path = imageFile.getAbsolutePath();
          Image image = Toolkit.getDefaultToolkit().getImage(path);
          image = image.getScaledInstance(100, 100, Image.SCALE_DEFAULT);
          ImageIcon imageIcon = new ImageIcon(image);
          label.setIcon(imageIcon);
          label.setText(path.substring(path.lastIndexOf(File.separatorChar) + 1));
          label.setVerticalTextPosition(SwingConstants.BOTTOM);
          label.setHorizontalAlignment(SwingConstants.CENTER);
          label.setHorizontalTextPosition(SwingConstants.CENTER);
        else {
          label.setIcon(null);
        return label;
    }I need to work on this to improve performance, but it works!

  • Cfchart yaxis scale is wrong when combining bar and line charts

    Hi, I am trying to combine a bar and line chart ti display data.  Everything looks good except that the yaxis scale is off.  I set the scaleMin to 0 but that doesn't help.  Below is my code, the custom XML style and a screen shot.  My ultimate goal is to get the yaxis to start at 0, not -1,000 as is currently the case.  I have combined this data with each set represented as bar charts and do not have this problem.  It must be the combo of bar and line charts together.  Any assistance is most appreciated.
    <cfchart title = "#variables.ReportName# Seedlings Ordered"
        style = "../SO_R_overall.xml"
        Format = "PNG"
        pieSliceStyle = "solid"
        show3D = "no"
        showBorder = "yes"
        showLegend = "yes"
        tipStyle = "MouseOver"
        chartHeight = "#DefinedChartHeight#"
         chartWidth = "#DefinedChartWidth#"
        font="arial"
        fontsize="12"
        fontBold="yes"
        scaleFrom="0">
        <cfchartseries
            type="bar"
            seriesLabel="Goal"
            query="getDivisionGoalsByDivision"
            valueColumn="divisiongoal" 
            itemColumn = "division"
            dataLabelStyle="Value"
            seriesColor="99CCFF"
            >           
        </cfchartseries>   
        <cfchartseries
            type="line"
            seriesLabel="Ordered"
            query="getQTYordered"
            valueColumn="QTYordered" 
            itemColumn = "division"
            dataLabelStyle="Value"
            seriesColor="green"
            >           
        </cfchartseries>
    </cfchart>
    ***************** Custom Chart Style called *****************
    <?xml version="1.0" encoding="UTF-8"?>
    <frameChart is3D="false">
            <frame xDepth="3" yDepth="3" outline="#333333" lightColor="white"
            leftAxisPlacement="Front" rightAxisPlacement="Front" stripColor="#CCCCCC"/>
            <xAxis scaleMin="0">
                <labelStyle isHideOverlapped="false" orientation="Horizontal"/>
                <titleStyle font="Arial-10-bold" isMultiline="true">Division</titleStyle>
            </xAxis>
            <yAxis scaleMin="0">
                <titleStyle font="Arial-10-bold"/>
                <dateTimeStyle majorUnit="Year" minorUnit="Month"/>
                <labelFormat style="Pattern" pattern="#,##0"/>
            </yAxis>        
            <dataLabels font="Arial-10" foreground="black" autoControl="true"/>
            <legend>
                   <![CDATA[ $(rowLabel)  ]]>   
              </legend>
            <decoration style="RoundShadow"/>
            <popup background="#C8FFFFFF" foreground="#333333"/>
            <paint paint="Plain"/>
            <insets left="5" top="5" right="5" bottom="5"/>
    </frameChart>

    I should have also said that I am using 8.0 Pro.
    I want to have the output similar to an e-book.
    The issue (Sept-October of 19xx)
    Then the individual pages (bookmarked)

  • Problem adding columns and rows in JTable

    hi, hope somebody can help me
    i have some problems when i add columns and later i try to set number of rows in JTable, ocurr some exceptions
    my code is something like thisJTable tabla = new JTable();
    TableColumn tc = new TableColumn();
    tc.setHeaderValue("col1");
    tc.setPreferredWidth(20);
    tabla.getColumnModel().addColumn(tc);up to here everything goes well, my table shows the column, but when i add this line((DefaultTableModel)tabla.getModel()).setNumRows(1);ocurrs the next exception
    Exception occurred during event dispatching:
    java.lang.ArrayIndexOutOfBoundsException: 0 >= 0....
    any ideas????

    oks, that would work when the JTable is created, but now we say that I require a method which adds a new row to the JTable a some moment of execution
    Look some of my code
    i have this in a JFrame...
    JTable tabla = new JTable();
    DefaultTableModel tm = new DefaultTableModel();
    tabla.setModel(tm);
    agrCol("Col1", 80);
    agrCol("Col2", 160);
    agrFil();
    agrFil();
    agrCol(String col, int lon) {
      tm.addColumn(col);
      tabla.getColumn(col).setPreferedWith(lon);
    agrFil() {
      tm.setRowCount(tabla.getRowCount() + 1);
    the jtable shows the 2 columns and 2 rows, but the setPreferedWith work only in the last col, i'm confused

  • Chart Formatting Question: Line Bar Combo

    Hello -
    I have a quick question regarding the order of labels displayed in the legend on a line bar combo chart. I have figured out how to rearrange the order of bars in the chart (the order is determined by the order of fields in the criteria section), however, OBIEE seems to always put the "line" field before the "bar" fields in the legend.
    I was wondering if there is a way to set the chart to display the "line" field following the "bar" fields in the legend?
    Thanks for the help!
    Jason

    Hi Jason,
    Go for Pivot Chart rather than Chart... and
    Apply Order by s as you want inside pivot....
    Previously even i got the order by problem in chart.. but trying the pivot chart, i resolved my issue...
    So give a try..
    Hope you know about pivot chart. Select Chart Only option from drop-down available for chart position
    Thanks & Regards
    Kishore Guggilla

  • Problem with combo box in a Matrix column

    hi every one, i  have a user form with a matrix(uid = 37) with some columns and one column is combo box. in that combo box i have to get values  from OSTC table (Code)...i have written this code ..i dont know how to access the combo box so that i can get values to combo box when i execute the prg....
    oitem = oForm.Items.Item("37")  37 is uid of omatrix2
                oMatrix2 = oitem.Specific
                oColumns = oMatrix2.Columns
                oForm.DataSources.UserDataSources.Add("CSR1", SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 1)
                oColumn = oColumns.Item("V_6")                      ''for accessing the combo box item [V_6 is col uid ]
                oCombo = oColumn.Cells.Item(omatrix2.row).Specific            ''''''''problem line
                oCombo.DataBind.SetBound(True, "", "CSR1")
                rset = oDICompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                query = "select Code from OSTC"
                rset.DoQuery(query)
                Dim tc As String
                rset.MoveFirst()
                For row = 0 To rset.RecordCount - 1
                    tc = rset.Fields.Item("Code").Value
                    oCombo.ValidValues.Add(tc, row)
                    rset.MoveNext()
                Next
                oMatrix2.Columns.Item("V_6").DataBind.SetBound(True, "@SALE_CHILD", "U_Tax")

    Call objMain.objUtilities.LoadComboValuesForMatrix(FormUID, "27", "SELECT Code,Name FROM OSTC Order by Code", "V_19", objMatrix.RowCount)
    Public Sub LoadComboValuesForMatrix(ByVal FormUID As String, ByVal ItemUID As String, ByVal strQuery As String, ByVal MtrxColId As String, ByVal Rowcount As Integer)
            Dim inti As Integer
            objRecSet = objMain.objUtilities.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
            Try
                Dim objmatrix As SAPbouiCOM.Matrix
                Dim objCombo As SAPbouiCOM.ComboBox
                objForm = objMain.objApplication.Forms.Item(FormUID)
                objItem = objForm.Items.Item(ItemUID)
                objmatrix = objItem.Specific
                objCombo = objmatrix.Columns.Item(MtrxColId).Cells.Item(Rowcount).Specific
                objItem.DisplayDesc = True
                objRecSet.DoQuery(strQuery)
                If objRecSet.RecordCount > 0 Then
                    If (objCombo.ValidValues.Count > 0) Then
                        For inti = 0 To objRecSet.RecordCount - 1
                            objRecSet.MoveNext()
                        Next
                    End If
                    If (objCombo.ValidValues.Count <= 0) Then
                        objCombo.ValidValues.Add("", "")
                        For inti = 0 To objRecSet.RecordCount - 1
                            objCombo.ValidValues.Add(Convert.ToString(objRecSet.Fields.Item(0).Value), Convert.ToString(objRecSet.Fields.Item(1).Value))
                            objRecSet.MoveNext()
                        Next
                    End If
                End If
            Catch ex As Exception
                Throw ex
            Finally
                System.Runtime.InteropServices.Marshal.ReleaseComObject(objRecSet)
                GC.WaitForPendingFinalizers()
                GC.Collect()
            End Try
        End Sub

  • Combo chart - different colors for Bar/Line

    Hi,
    In a combo chart is it possible to have different colors for bar and lines......................In our report- combo charts the intersection of bar/line is NOT visible beacuse of same color.

    Yes, I create a formula row with a zero in the first column. The row should be hiden. This has to be at the top of the grid and include the row in your data ranges for the chart.

  • Chart: Columns + line

    Hi,
    In Visual Composer 7.0, if i use the Combo Chart with configuration "Columns + line",
    the Column are overlapped.
    Pax 2007 -> Column A
    Pax 2008 -> Column B
    Budget 2008 -> Line
    Column A and Column are overlapped and i want to see separate columns ...
    Is there the same things with 7.1 ?
    Any idea ?
    Thanks
    Rodolphe.

    Hi Rodolphe,
    If I understand you correctly, you would like to assign the columbs to series A and the Line to series B, that way to create an overlap.
    As far as I know it is not possible to do that in VC7.1 ,since the type of the chart does not effect the way you define your series.
    regards
    Yogev.

  • Need help in Line bar combo chart - line is not prominent in dashboard

    Hi All,
    I face an issue where the line in a line bar combo chart is not prominent in Dashbords.
    lets say i have 5 reports (all of them are line bar combo charts) in a dashboard. The lines in graph are not prominent or not displayed in usual thickness. But this scenario does not happen always. if i scroll down or up the browser(here i am using IE8) some of the reports displays line in the charts and some does not display the line. when i click on the report then the line will be displayed.
    please suggest whether this is a browser issue ror something to deal with OBIEE itself.
    Thanks in advance.

    Hi,
    It's a bug in obiee11g. kindly download the patch file from My Oracle Support and delpoye it
    OBIEE 11g: Line Bar Combo , With Stacked Chart , The Bar Width Gets Affected [ID 1369493.1]
    Patch 12947990: BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
    Symptoms
    When the chart type is changed from Standard or Default line-bar to Stacked line-bar chart, the bars are reducing their width.
    Line-bar should keep the width of the previous bars.
    However, when vertical Bar is changed to stacked vertical, the bar width remains the
    same. But when a regular Line-Bar is changed to stacked vertical, the width
    changes (reduces, in this case it becomes half the original width)
    Cause
    For dual Y stacked bar graph, the bar width was half of the regular bar width
    because the series assigned to Y2 was given the half of the space also. This is not needed if the marker type for Y2 is not bar.
    The following bugs have been opened to handle this issue
    Reference Bug:
    Bug 12931660 - line bar combo with stacked chart changes its width
    BUG:12931660 - LINE BAR COMBO WITH STACKED CHART CHANGES ITS WIDTH
    BUG:12947990 - BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
    Patch 12947990: BAR CHANGES WIDTH WHEN CHART CHANGED FROM DEFAULT LINE-BAR TO STACKED LINE-BAR
    Bug Ref:
    e.x: applying patch file refer the below file
    http://obieeelegant.blogspot.com/2011/11/how-to-apply-patches-using-opatch.html
    Thanks
    Deva

Maybe you are looking for