Problem in communication b/w MB90 and spool request

Hi Experts,
I am trying to print the Goods Movements in MB90. I am choosing print preview and number copies more than 1, But when I went to SP02 and trying to look at the request it only displaying one copy of the request, Please guide me how to encounter this problem at the earliest...
Thanks and regards,
B.Homeswara Prasad.

Hi
I did the convert the source system in BDLS...but still the problem persists.
I posted this issue in SAP.
I got the following reply.
Check if table RSADMIN table has correct logical system in BW
If incorrect
Run program SAP_RSADMIN_MAINTAIN and correct it.
In RSADMIN table i couldnt locate which field and in program SAP_RSADMIN_MAINTAIN i didnt understood what is value and object.
Did anyone come across this situation.
Regards
Rak

Similar Messages

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

I have problems in communication between my notebook and Epson printer. It goes offline everytime I unplug it from the notebook and there is no way how to switch it on. Although the printer is recognized and scanning is not a problem. Any solution?

this is exactly the kind of response i expected, almost begged support to please not do this to me and yet there it is another meaningless, non helpful, standard template response to restart my apple tv.
this does NOT work which is why i am contacting you. i have tried all suggestions about unplugging and restarting and nothing works.
i live in an apartment and logon to the provided wifi wireless. so i do not have access to a router. however, management says they have talked with their provider and have been assured that the required ports are available.
remember all the jokes about how bad windows was because the solution was always to re boot. funny huh? how is apple any different.
i have been to the local apple care store and they are clueless, too.
should we just end it here and you admit that i will not be getting any support from apple on this one? i got the ipad because my kids were such big fans. it is difficult for me to share their enthusiasm.
at this point i am just curious about how you say you cannot support your own product so i can complete my file on this contact.
thanks...sorry it was you who got this problem..

Purchase order print priview and spool print output are different.

Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview the TAX VALUES value is 120 coming..
when i am giving print with spool.. the amount value is showing TAX VALUE
is 443..why it is showing wrong..
this is for perticular output type.
why TAX VALUES are showing different in print view and
spool print.
help me.
regards,

Hi Neil,
thanks for your reply.
but the valiadtions are happening in standard functional module PRICING.
it is realted script(medruck)...but there is no code point for spool or printer side..
and the issue is realted one PO OUTPUT TYPE..
it is sap standard debugging... when i am debugging the functional module PRICING.
the values are coming dynammically.
help me.
regards,

Print priview and spool print output are different

Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview one amount value is 120 coming..
when i am giving print with spool.. the amount value is showing
is 443..why it is showing wrong..
this is for perticular output type.
why perticular values are showing different in print view and
spool print.
regards,

make this setting change:
in SPAD > In the menu Settings -> Spool System
In the others tab check the first check box in the Output Controller block, SAVE and exit

PO spool request

hi experts,
We faced PO printout problem during our Go Live. We have implemented SAP with new Plant/Company.
For all PO forms in existing company are printing fine, but for this new company, we are trying to print PO but it only goes with the spool request no.
Next problem, all PO is saving under 1 spool request no. so when you open the Spool request, all PO store in 1 spool.
can any tell me, what is this problem came from? set-up or from smartforms?
thanks in advance.
regards,
Maia

Hi,
Spool Request- As per my knowledge u require spool request no to download the PO in Acrobat format. In messages only we do the settings
Goto messages- communication method- specify logical destination -tick print immediately- in SAP cover page select X Print and go to further data select despatch time - 4 send immediately save ur PO and and come out and go back to the PO and again click messages- go prcessing log u will get spool request no.
Check the above settings that u have made properly ornot.
ok

Spool request generated twice

Dear all,
I'm facing a very strange behavior while printing sales order confirmation from va01
in SAP ECC5.0.
I've got access sequences and condition records in order to print out immediately the form at saving, based on sales org/doc type.
Among 3 different doc type, only one is wrongly output twice when saving, without any explanations : no messages number set up in communication no TDCOPIES , output type set up ok and so on...
I really check around the whole things to find out a potential reason of this but without success.
Other doc type call same smartforms and print program but correctly issue only one output.
Where else could I look on to?
Please advice.
Regards.

i know the table for spool request : TSP01
But how should i link it to background job name ?
i want the link between background job name and spool request generated by it......
TBTCPV is the view but it stores only one spool request.....rather than multiple spoolreq generated by background job..

New Spool Request not generating

Dear All,
I have seen print preview of one PO and taken print which has created a spool request.
Another PO also I have seen the preview and taken print, but it has added to previous spool request as second page.
My problem is I need to generate new spool request for each PO. Where do I need to do setting for this. Pls guide.
Rgds
Srini

Hi Srinivasan,
In the print program, try setting the parameter TDNEWID to 'X'.
Following link can help you ..
Stop the combining of spool request to an existing one

Spool Request Display Report

Hello,
Pleasure to be part of this community and ask the first question.
I have created a report and probably, that report is going to be scheduled to run weekly.
I want to understand how I can create a job and spool request display report for this program. I have found some information from this forum about SM36/SM37 T-Code and spool request display. However, I think I am not able to get the whole scenario of how it is going to work.
If someone can give me an idea, that would be great. Practical examples will be appreciated.
Regards,
Udit

I am assuming you will be scheduling this job manually and not programmatically.. The process is as follows..
Goto SM36
Enter a Job Name
click on START Condition butto and click Date and Time button
you will see a button PERIODIC VALUES appeared below.
Click and select WEEKLY as you have indicated, SAVE it.
Enter date and time so that it starts on that time and is scheduled everywk at that time
You can enter NO START AFTER in case you want to restrict this.
Then Click STEP
You can enter program name variant and also select Printer specification
And that should do the trick..
Hope this helps

Spool request , hard disk

hi,
In my server the spool request crossed 31 thousand, so I deleted all, when i did that my HARD DISK size got reduced by 3 G.B.
Please can you tell what would be the problem.
regards,
Prabhu

Hi Prabhu,
Deleted old spool requests is doesn't matter. Check the standard background job SAP_REORG_SPOOL to delete old spool requests. If standard background job not scheduled through SM36.
Regards,
Ganesh
****Reward points if Helpful*****

Generate spool request from an invoice

Hi,
I'd like to know is there any function module to generate an spool request from an invoice document generate previously by VF01 (VF04) SAP transaction code.
I'd like to generate on demand a spool request over an invoice previously generated by SAP
Anyone knows if it is possible?
Thanks

The billing process included the spool generation runs perfectly by stantard SAP funciontality.
But I'd like to generate a spool request whenever I want for an invoice previously generated and printed.
You know that for space requirements the spool request are deleted periodically, but I want to generate a spool request for an invoice, which spool request was generated and deleted. This behaviouir is reclaimed for a system process so, it's not possible to regenerated the spool request using the funcionality incluided in SAP by VF02, VF31 transactions code.
I need a function module or something like that, so import and invoice document number and export and spool request.
Thanks in advance,

WHICH TABLE STORES SPOOL REQUEST GENERATED BY BACKGROUND JOB ?

Background job is generating multiple request.
i am not able to find the table which stores all the spool request for a particular background job.

i know the table for spool request : TSP01
But how should i link it to background job name ?
i want the link between background job name and spool request generated by it......
TBTCPV is the view but it stores only one spool request.....rather than multiple spoolreq generated by background job..

HP Laserjet Pro CM 1415fn crashes and spooler service stops

Hi Guys,
Please assist. I have an HP Laserjet Pro CM1415fn multifunction printer installed on an XP OS. Recently the printer started to print giberish when I tried to print from any application (word, notepad, wordpad, image and fax viewer etc). I also noticed a popoup error message - Run a DLL as an App error. I unistalled the printer software and drivers and restarted, this after running a scan with malware bytes (no detections), and I was unable to get the printer to re-installed after. I keep getting a RPC service not found and Spooler subsystem App has encountered a problem and needs to close. I have checked that all services are running, but nothing is working. After much prodding and poking, I eventually noticed that all errors are directly associated with hppccompio.dll. Even explorer crashes when I try to access printer properties. What should I do? I hope ifnormation was sufficient enough. Also, printer is connected via USB.

Hi Opp1,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand you are unable to reinstall the printer software.
I will be happy to help you.
The print spooler is part of the Windows operating system and if it doesn't stay running the printer software won't install or print.
You could try the following steps to see if this will resolve the issue.
Normally with spooler problems the first thing to do is to clear the print queue.
Open a Run window (Windows Logo key+R), type cmd and press Enter.
Now type these commands, which are in capitals for clarity:
NET STOP SPOOLER and press Enter
DEL %SYSTEMROOT%\SYSTEM32\SPOOL\PRINTERS\*.* and press Enter
NET START SPOOLER and press Enter
EXIT and press Enter
If you are still having issues with the print spooler stopped then right click on the start button, left click on explore, open the windows folder, open system32 folder, open the spool folder, open the printer's folder, then delete everything on the right window.
Then go back and try and start the print spooler again.
Run a full uninstall of the printer software. Disconnect the USB cable.
To uninstall from CD:
Go start and select computer.
Right click on the CD for the printer and left click open in a new window.
Double click on uninstall.
Uninstall printer from the C Drive.
Go to start, computer, c:, windows, program files or program files x86, HP, printer name. Double click uninstall. Restart the computer.
Check to make sure the print spooler is running.
Ran the installation again. Don't connect the USB cable until prompted.
If the print spooler stops again you will need to contact the computer manufacturer to resolve this issue.
Hope this helps.
Thank you for posting on the HP Forums.
Have a great weekend!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Design problem: RS232 communication

Hi,
I have a design problem for communication with a device via RS232. Since I'm normally a C++ programmer I might just look at the problem from a wrong angle and hope for some hints how to do it in LabVIEW.
The scenario:
A device is communicating with the PC via RS232. The device permanently sends data packets. At the same time, commands can be sent to the device and it returns replies. Data packets and reply packets are arbitrarily mixed, i.e. after sending a command there could be a couple of date packets before the reply comes back but the packets can be distinguished by an identifier.
At least one, ideally several VIs should communicate with the device. Commands should be sent by pressing buttons and the incoming data should be parsed (the packets contain mutliple data streams) and shown on graphs or saved to files.
My initial idea:
Coming from C++ I wanted to build a class for the communication that permanently reads the incoming data and splits it to reply and data packets. This class would then have a function to send out a command and would return the reply or a timeout and it would be possible to register and unregister listeners (I wanted to use queues for this) for the various data streams.
The problems I ran into:
There were a couple but the two most pressing problems were: how could I communicate with the constantly running sample VI (e.g. to stop sampling) and how could I propagate changes to the class to it (e.g. new listeners). Since it is not returning I don't see a good way to implement it as in instance funcion (i.e. pass it the object). I could probably not let the sample function run continously but call it periodically from outside. However I planned to implement the class as a singleton, so it could be used parallely from different VIs.
Is there a best practice for a case like this?
I'm glad about any hints or ideas.
Thanks,
Tobias

tfritz wrote:
Hi,
thanks. Since almost the same thing was suggested to me in a German forum I guess this is really common practice (using one VI with different methods controlled by a queue). It still seems a little "unnatural" for me but my biggest concern (bad interface description) was shattered by the suggestion in the link you sent me to wrap these functions with wrapper VIs, thus caller VIs won't have to deal with the call-by-queue-mechanism. This might also be easier to port to a different implementation later. However I still see the danger that the continously running VI could easily become bloated.
It also requires me to change the way I have looked at VIs until now. In our course they told us that VIs are basically functions. Using this design patterns, the VI becomes more of a module, really (Like a C module implemented in a C-Source file). But I will try it. It sounds as if it could work.
I will still look into the OOP solutions a little more, though. Do I understand you correctly that you wouldn't recommend using LVOOP because it's still buggy? What about dqGOOP for example? This sounds like it could do what I need (however it doesn't seem to implement things like polymorphism, late binding and inheritance so I don't quite see what's so OOP about it. It seems more like programming with structures in C.)
I don't know if LVOOP is buggy or not. I think early on it was buggy and things have improved in recent versions. I have read that it doesn't have all the features that you would have in OOP like C. I wouldn't recommend it only because I'm not familiar with it at all. I can't recommend something that I'm not comfortable with. If you go that route, plan on spending time in these forums and in LAVA to reading up on what others have done. I haven't hard of dqGOOP.
But back to your suggestion. I still have a couple of questions:
- How do you return values from the module? Would you use a queue for that as well?
- Where would the parameter queue be held (created and passed to the VI)
I would store all of these in a functional global variable. This is the VI that stores data in shift registers. Ben's action engine nugget is an advancement on that. This allows for both the calling VI and the parallel running subVI to get and set the data as needed. It runs quickly so neither process should be forced to wait while the other VI is doing its thing.
- My VI has to be constantly sampling and this shouldn't be interrupted too long by other functions as adding a listener. However both functionalities have to access the same kind of data. Is there an easy way to parallelize this? Would the sampling be a case in the case diagram that's always used if no command was sent to the VI or would it somehow run parallely? Yes. There are a couple of ways of doing this. One would be for the dequeue to have a timeout function. In the event the dequeue times out, you run the code that is doing the acquisition. I think a better method is that the code that does the acquisition enqueues its own command again to the end of the queue. Let's say that is command A. So when case A finishes, it enqueues A, which seeds itself to run again. So if nothing else comes into the queue, it just executes A , A, A, A. But let's say another section of code needs to do something such as command B. It will slip B into the queue while A is executing. So you would A, B, then A again, because A would get slipped back into the queue when the first A finishes, but B has already been put in while the first A was running.
- Would it be possible to make the VI reentrant and in this way use it simultaneously on different COM ports (using different parameter queues as well)? I'm not sure if I will need this but it would be neat if it could work.
I think you could do this. It may be a case where the VI is saved as a template (.vit) and you initiate it multiple times. I haven't needed to do this before, so I'm afraid I can't provide any details or useful tips.
Well, I will fool around some more. Thanks so much for your help. This is kind of exciting since the concepts are quite new for me. Btw, is there something like an academic theory (computer science) for LabVIEW? I came across functional languages in university but data flow languages are still a new concept for me.
Tobias
tfritz wrote:
Another question about the "dynamically starting" of the VI:
How is the path handled? Is it guaranteed that it always takes the VI from the project or does it just search for the first VI by that name it finds in the file structure? Does this still work when building an .exe from the project? What happens if the VI is already running? Can you test for this?
While I'm at it: is there a way to stop LabVIEW from searching for subVIs it can't find when openin a VI? This resulted in very unexpected behaviour sometimes where it would find the VI somewhere else (with the same name but maybe an older version).
In my case, I just had the path hardcoded. It is my only instance, I'm not planning on moving the VI's. If you don't have the path, it will take a VI by that name if it's in memory. If it isn't in memory, it starts searching relative to the calling VI's path. One thing I know, if you are dealing with relative paths, a subVI has a different relative path in an .exe as opposed to the development environment. The name of the .exe becomes a folder. So in development, if your sub VI is mySubVI.vi. In an executable, its path is MyExe.exe\MySubVI.vi
For all of this, I recommend searching the forums to get more details.
If it is searching for a VI, you can hit ignore. But of course you'd have to do it before it finds it. When you are dealing with versioning issues, I recommend making a backup copy of the entire directory structure elsewhere. Some location where it shouldn't stumble across it.

An error occurred when processing the spool request. (Possibly due to memory problems)

Hi SAP,
My backgroud job is failing with log as shown below
Job started
Step 001 started (program ZMRS0065, variant SUS
Step 002 started (program ZDRS0090, variant SUS
Step 003 started (program ZFRS0305, variant SUS
Step 004 started (program ZFRS0300, variant SUS
Access error
Job cancelled after system exception ERROR_MESSAGE
An error occurred when processing the spool request. (Possibly due to memory problems)
Kindly help out in this issue
Regards
Mohammed

Hello Mohammed,
Have you seen any error in your SM21 system log and developer trace of spool work process
during that time?
The maximum size when create spool is 2GB.Pls also check if you are creating a spool
larger than it.
Best Regards
Jie Bai

Communication between HP eprint and Google Cloud Print

Hi,
the communication between HP eprint and Google Cloud Print seems to be broken. At least for me.
The documents do get printed when I print vio Chrome browser or Cloud Print dashboard -- but the status in cloud print remains as "submitted". It seems like somehow the HP eprint status doen't get reported back to cloud print. In HP eprintcenter the log says "printed".
Well, I wonder who will take care of this problem ... (Hope it will not result in fingerpointing only ...)
Thanks for your support!
Best,
George
This question was solved.
View Solution.

Are you able to log back in later and the status at Google Cloud print update to reflect the true outcome of the print job? Or does it just remain as "submitted". Otherwise, if it is printing and showing in the log at ePrint Center (EPC) as printed, the issue would not be on the ePrint side but on Google's
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Problem in communication b/w MB90 and spool request

Similar Messages

Maybe you are looking for