Problem in configuration of material master

Dear cons
I want to make quality management control key field is a required field in material master. so in T-code-
OMSR I selected field selection group-99.& make it as a required field.At the time of creating material master the system activated other field like certificate type & target QM system as required field along with QM CONTROL KEY.How can we make it only QM CONTROL KEY as a required not other.
nrk

THe field name for certificate type is QZGTP... Selct the right arrow in the transaction OMSR and make it as optional in MM01..
Hope this helps..
In a similar way try to do for Target system...QSSYS... make it as optional or hidden for MM01..
Hope it will silve ur problem...
karthick

Similar Messages

Problem with creation of material master

when try to create material master using mmo1
it gives an error message
Record X5 does not exist in table T133E
and itis terminating the screen and going back to img screen
please try to give me some solution for this
Thanks
regards
Ravi

Hi Ravi,
This is because of selection screen not maintained properly in your customization for each material type.
For more details, explore following IMG settings;
Transaction Code OMT3B:
Logistics General Material Master Configuring Material Master Define Structure of Data Screen for each Screen Sequence
Bye,
Muralidhara

Problem with BAPI of Material Master creation

Hi,
I am creating material master(mm01) through BAPI_MATERIAL_SAVEDATA.
Program is working fine but when i m checking in MM03 to display uploaded data through BAPI, i cant able to see material which i created to through BAPI but i can see in MARA table.
i dont know wht is the problem ?
can anybody let me know abt this ?

then u are not committing the work.
flow will be like this
call ' BAPI'
if return[] is initial.
commit work.
else.
endif.
Regards
peram

Problem in BDC for Material master Change

Hi,
I have made a BDC to change the material master, I have done the recording with SHDB   I want to do changes in Sales data and MRP data, when I do the recording I have selected views and it was 4 , 11 AND 12 VIEW IN select vie option    but in some material Classifcation view is maitain and it is coming at 2nd position and my selected views are shiftin by one position due to this BDC is giving error Screen contain no filed -
I sthere any way that I acn directly select the Three views as Sales data , MRP1 and MRP2,   because when we do the recording it is not showing the name it is showing as
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(12)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=DEF_SAVE'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(04)'
                              'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(11)'
                              'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(12)'
                              'X'.
regards,
zafar

Hi,
Myproblem is solve , in the table MARA i found the filed VPSTA : Maitenance status,   Having the vakue may KVEDLBZX those value is diffrent for different material   this value indicates
User department                       Maintenance status
Work scheduling                                      A
Accounting                                               B
Classification                                            C
MRP                                                           D
Purchasing                                                E
Production resources/tools                       F
Costing                                                      G
Basic data                                                  K
Storage                                                       L
Forecasting                                                 P
Quality management                                    Q
Warehouse management                             S
Sales                                                           V
Plant stocks                                                 X
Storage location stocks                               Z,
after reading what fields are maitain according to that i have selected the proper views and my problem is solve.
regards,
   zafar

How to transport number range group Configuration in Material Master

Hi,
I have this query regarding how to transport number range group in material master from one server to another.
Problem: There was no number range assignment done for a particular material type. So, i assigned the particular mat. type to a group which had some number range intervals with the help of T-Code MMNR.
But when i want to transport this config. to other sever, it is only transporting the interval but not the assignment done to that group. In the menu bar only Interval transport option is there.
Can anybody help me with this I hope the query is clear.
Regards
Vivek

Hi,
Number range objects can be transported using Workbench requests.
Thanks
Kishore

Unspsc code configuration in Material master

Hi Guru's,
My client has using UNSPSC code heirarchy in the material master.
There are four levels of heirarchy. I configured in the classification view of the material master accordingly to the heirarchy. Now I need to genarate a report based on the material group and that report should pull the characterstic and its value correctly at a specified heirarchy level.
Is there any standard report to pull the heirarchy level for the material group?
How can I achieve this
Appreciate all the help
Rrds,
Shiva

Hello Shiva,
I'm looking for exactly what you stated above ( 2 years ago... ), but I'm a step behind you.
Can you refer me to configuration doc for setting up material master based on UNSPSC code hierarchy? Do you do this through WG21, entering commodity level in Material group and then Class/Family/Segment in MG Hierarchy level field ?
Also, did you find or receive any guidance on standard report to pull hierarchy level for material group ?
Any guidance on this is much appreciated.
Kim

Configuration of material master idoc interface to RFID

Hi,
We are planning to have SAP RFID. Once operational, do we need to send SAP Material Master field data to RFID? For ex; when the description of a material is changed, do we need to send this new information to RFID system through Idoc (or some other way)?
Regards

Yes. This is available in SAP AII which is configurable. Material Idoc is the best way. Activate change pointers generally (Customizing for Logistics - General -> Supply Chain Planning Interfaces (SCPI) -> Auto-ID Backend Integration --> IDoc Processing --> Material Master Data IDocs -> Activate Change Pointers Generally).
Hope this helps.
Thanks,
Naveen

CONFIGURATION OF MATERIAL MASTER

Dear cons
I want to make some of the field hide, required in the material master.So I tried to use the T-code- OMS9.After entering the T- code, First line contains field selection group. At the bottom of the table I saw two radio button sort entries by field reference & field selection. And in the middle portion of the table .if we make double click, then in the second screen Hide, required, optional as well selection group fields from 1 to 240 are available. I want to make one field optional where it was in a hide mode. The selection 1-240 no. is available. My question is for any field to make optional it is necessary to make changes 1-240 times in the selection group? In the middle portion of the table in where used list indicator ,some plants are assigned. Where is the setting .Another question is field selection group are available from 1-101 times. How can we know which field selection group is appropriate for which field. In the T-code- OMS3 One field reference field is available. What is the use of it. In T-code- OMS9 in the middle portion of the table one field reference field is available. I saw it is different from the field reference field from T-code- OMS3. PL. help me.
.nrk

To every material type one field reference key is assigned and in a field reference key there are number of fields
every field is assigned to a field selection group
and possibly in a field selection group there are no. of fileds so if you make any of the field seection group as hide/mandatory so it will be applicable to all the fields so
if you want to make a particular field as mandatory then assign a free field selcetion group to that field via tcode i think OMSR and then make this field selection group as mandatory via OMS9 for the particular field reference key .
Edited by: Sap: IN on Apr 6, 2009 3:46 PM

Problem in bdc of material master

Dear all,
I have made BDC for material master . In selection option i selected Quality management view, i completed the recording. while running the prgm its not selecting the qm view fields, so here i cannt upload the record for qm view only, I tried in LSMW also.plz give some solution.
Point will be sure,
gowri

hi,
I Hope u r using MM02
The view no will differ according to the material created.
use bapi,
please chk the below link
BAPI_MATERIAL_SAVEDATA - QM - Inspection Setup
regards,
Prabhu
reward if it is helpful.

Problem in delta for material master

Hi all,
We are using "0material_attr" as data source.Till now we were loading data for material using full update mode.
Now we want to change the update mode from delta update mode.
So we initialized update for material in BW using " initialize without data transfer " update mode. Now for testing i have changed couple of material in R/3 ... but nothing is getting extracted in BW.
then i checked in R/3 in "rsa6" there is tick for delta update and then i checked in rsa3 to simultate the delta process but its not allowing me to change from "F" to "D".
So how to proceed if i want move from full to delta for my material master data ??
Regards,
Viren.

Hi
Pls check in roosource table whether this datasource is delta capable or not.
if this is delta capable then make first full load and then init without data transfer and then changes some recopds in r/3 and load whether those records are coming in r/3 or not
Thanks
NS

CIN Configuration in Material Master

Hi Experts,
I have maintained all the settings related to CIN in the path SPRO >> Logistics General >> Tax on Goods Movements >> India
But in the material master the fields to maintained the chapter ID is not appearing in the "Foreign Trade: Import Data".
Please let me know
1. if I am looking at wrong place
2. What other settings are required in material master and vendor master etc.
Please note: I was given a PDF document for CIN settings but the doc doesnt contain the additional settings that are required to be done in the vendor and material master.
Thanks in Advance,
Uday Kumar.

Hello
There is no pricing procedure in CIN. As far as CIN is concern it is only relevant to Excise duty, Edu. Cess on Excise duty and Higher Edu. Cess as far as sales point of view in addition to special excise duty or additional excise duty.
Accordingly condition types are created in Tax procedure TAXINJ and the SD pricing procedure. These condition types once created in Tax Procedure get reflected in Tax Codes which can be saved in Condition record of pricing procedure which determine the excise taxes. Also these taxes are to be maintained in J1ID to get determine in Excise Invoice.
Hence there is only one pricing procedure.
Regards
Prashant

Material Master Characteristic Configuration

Hi Experts,
I'd like to know how to configure the Material Master Maintenance MM01/MM02/MM03 tcodes to show the Characteristic Tab and all other tabs that can be activated. And also what are the configuration to consider when using the Characteristic Option for Maintenance.
Thanks a lot!

Hi,
I am done with the configuration of OMS2, now I can see the Characteristic Tab in the Material Master (MM01/MM02/MM03). However, the user wants to display the Charateristic Tab with all the tabs. As when I choose the Characteristic Tab display, the other tabs for material master are now gone. How can I configure that the Characteristic Tab is a normal tab, under Material Master Maintenance/Display?
Thanks for your help!

How to configure Material Master

Dear Guru,
May I know how the steps to configure material master?
Thank you.
Rgds,
Goh Yen

Hi,
Follow the below steps for customization of material master
1. Material Number:
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Define Output Format of Material Number
TCODE: OMSL
2. Define Field Reference:
SPRO -> Logistic - General -> Material Master -> Field Selection -> Maintain field Selection For data Screens
T CODE: OMS9
3. Define Industry Sector:
SPRO -> Logistic - General -> Material Master -> Field Selection -> Define industry Sectors and industry -sector- specific Field Selection
T.Code:OMS3
4. Material Type:
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define attribute of material Type
T.Code:OMS2
(Select Material Type: ROH for ur raw material( example) copy it and renamed it to UR RAW MATERIAL)
5. Define Screen Sequence:
SPRO -> Logistic - General -> Material Master -> Configuring the Material Master -> Define structure of Data Screens for each Screen Sequence
T.Code:OMT3B
(Select Screen Sequence: 21, copy it and renamed it to Z with any letter( Like ZA or ZB )
6. Ordering Screen Sequence:
SPRO -> Logistic - General -> Material Master -> Configuring the Material Master -> Maintain Order of main and Additional Screen
T.Code:OMT3R
7. Assign Screen Sequence to Industry Sector:
SPRO -> Logistic - General -> Material Master -> Configuring the Material Master -> Assign Screen Sequences to User/Material Type/Truncation/Industry Sector
T.Code:OMT3E
8. Assign Field Reference to Plant:
SPRO -> Logistic - General ->Material Master -> Field Selection -> Define Plant -Specific Field Selection and Plant -Specific Screen Selection
T.Code:OMSA
9. Define Material Group
SPRO -> Logistic - General -> Material Master -> Setting for Key Field -> Define Material Group
T.Code:OMSF
10. Define Number Range of Material:
SPRO -> Logistic - General -> Material Master -> Basic Settings -> Material Type ->Define Number Range for each Material Type
T.Code:MMNR
11. Define Purchasing Group:
SPRO -> Material Management->Purchasing->Create Purchasing Group
T.Code:OME4
Regards,
Biju K

Material Master : how maintenance statutes works ?

Hi,
I'm new to Material Master customizing and I would like to understand what maintenance statuses do and how it works.
What does it mean exactly if I add for exemple the maintenance status "V" instead of "E" for the screen that correspond to purchase view ?
Does it meen that the "purchase" view will become mandatory before I can sale some material and stop being mandatory to pruchase the material ?
Are mainteance statuses related to user authorization, for exemple does it tell the views I'm aible to display or not ?
Thanks for help,
Regards
Morgan

Thanks for this answer but I don't think it solves my problem.
What you are talking about is using the MM50 transaction to see which view aren't yet maintained considering à gived maintenance status. Of course, if I don't change default customizing, using MM50 with 'D' as a value for parameter 'Status' will tell me wich material do not have MRP Views maintained.
But my questions a re related to :
- authorization concept : do the maintenance statuses values I specified under "Configuring the Material Master u2192 Define Structure of
Data Screens for Each Screen Sequence" determine wiche user can access wich view
- if i change the maintenance statuses related to a view in this customizing, what will it do ?
Regards,
Morgan

Material master MM01

Hi,
I am working on ECC 5.0.
I am trying to create a material but facing a problem.
Earlier I had created a material type Finished product and Industry Sector: Retail successfully.
Now I am trying to create a material of same Material type and Industry Sector.
In the Sales Organisation Data 1 tab, I am not able to see the tax data fields.
I have checked all the configuration settings in SPRO in material master settings but there I am able to see the screen properly.
But when I try to create the material, tax data info is missing because of which I am not able to create the material with required information.
Please help me solve this problem.
Thanks and regards
Amit

HI Amit,
I think this is the problem with the screen sequence which is assigned. It would be vey convenient if you can take the help of a MM consultant in setting up the right sequence.
go to Logistic General - material Master-configuration of material master & follow the below steps:
1. Go to Material Master Select the Field which to be made optional. Press F1 and copy the Table and the Field Name (Technical).
2.Go to SPRO-F5-Logistic General Material Master Assign Fields to Field Selection group
3.Give the details of Table and Filed name by Selecting Field Name. Note the Filed Selection Group No.
4.Go to SPRO-F5-Logistic General Material Master Maintain Field Selection for Data Screens.
5.Give the Group No. and Make the required Field as Optional.
take the help of MM consulatnt.
REWARD IF IT HELPS
REgards
Srini

Problem in configuration of material master

Similar Messages

Maybe you are looking for