Problem in configuring Reports Server. Error-186

Dear All,
I have Developer6.0 on Windows NT with service pack 3 applied.
Problem is that the Report Server is not getting configured as an NT service .
after typing
rwsmts60 -install repserver
a Service is created in the Win NT Services
when I try to start
( I have a default printer )
the following error comes :
"The Oracle Reports Server (repserver )
service returned service specific error
186"
Secondly I tried not to use NT service
by
rwsmts60 -listen repserver
It gives the error
"REP-0186: Daemon failed to listen to port"
My Tnsnames.ora entry is
repserver.world = ( ADDRESS = ( PROTOCOL = TCP ) ( Host = 10.5.0.77 )
( Port = 1949 ) )
I tried different port no.s but still the error persists.
The report server and the OAS is on the same Machine and database is on a separate machine
I am following the White Paper at http://technet.oracle.com/products/reports/pdf/A55143.pdf
Thanks,
Rajat
null

did you ever get this resolved? I have the same problem. [email protected]
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ajayb1():
Dear All,
I have Developer6.0 on Windows NT with service pack 3 applied.
Problem is that the Report Server is not getting configured as an NT service .
after typing
rwsmts60 -install repserver
a Service is created in the Win NT Services
when I try to start
( I have a default printer )
the following error comes :
"The Oracle Reports Server (repserver )
service returned service specific error
186"
Secondly I tried not to use NT service
by
rwsmts60 -listen repserver
It gives the error
"REP-0186: Daemon failed to listen to port"
My Tnsnames.ora entry is
repserver.world = ( ADDRESS = ( PROTOCOL = TCP ) ( Host = 10.5.0.77 )
( Port = 1949 ) )
I tried different port no.s but still the error persists.
The report server and the OAS is on the same Machine and database is on a separate machine
I am following the White Paper at http://technet.oracle.com/products/reports/pdf/A55143.pdf
Thanks,
Rajat
<HR></BLOCKQUOTE>
null

Similar Messages

No current report server error

Using Report Builder 3.0, I get no current report server error and when I run the report I get no data. Does anyone know how I can remedy this problem?
sukai

Hi sukai,
Based on your description, it seems that you have not connect report server when you run a report in Report Builder. In this scenario, I suggest that you should click the Connect option with “No current report server” in the lower-left corner.
If you have access to the machine where SSRS is installed, you can open up the Reporting Services Configuration Manager. Then you can see the Report Server Web Service URLs in the Web Service URL tab. Another option is directly type the following URL in
the popup window:
http://<machine name>/ReportServer_<SQL Server instance name>
If you have any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Uninstalling BPC fails - Reporting server error

Hi,
I am uninstalling BPC 75 SP06, as recommended I deleted all folders related to the tool such as:
Control Panel - Uninstall clients and Server
C: - PC_MS folder
desktop shortcuts
C:> docs and settings > administrator > my documents >PC_MS
C:> SAP Business Objects
After this, I installed again the tool but the error "Cannot COnnect to reporting services server, check your server information".
I havent changed anything !!
Also trying to access to Reporting services inside SQL shows this:
===================================
Cannot connect to BPCDEMO.
===================================
The underlying connection was closed: The connection was closed unexpectedly. (Microsoft.SqlServer.Management.UI.RSClient)
Program Location:
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.GetSecureMethods()
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.IsSecureMethod(String methodname)
   at Microsoft.SqlServer.ReportingServices2005.RSConnection.ValidateConnection()
   at Microsoft.SqlServer.Management.UI.RSClient.RSClientConnection.CreateConnection(String connectionString)
   at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.CreateConnectionObject()
   at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
   at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
   at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
What can I do?
Please i need help ASAP
Velázquez

Hi Nilanjan,
Thanx for the response.
The Reporting Service is running, I installed it as "default installation" and everything seems to be ok, the Configure Report Server console shows everything green even Database Setup. Im using just 1 user (default and administrator) because it is a local machine however I rtied to performs a test in the Database Setup tab and I selected "credentials type - windows , account name - administrator , password - xxx"   and it shows "there was a failure applying your change" it seems that the user is not appropiate and I have no idea why.
I tried to reinstall Reporting Services but it doesnt seem to work, I have no idea what to do, please help.
Velázquez

Error from explorer (Report Server Error)

Report Server Error Report 10g
REP-51002: Bind server myservername failed
Message was edited by:
Dipo Ogundele
Message was edited by:
Dipo Ogundele

this means either the reports server is already running or some issue with the reports server configuration.
Are you able to start a new reports server?
Check this link and try using list of reports server fmx to see all the reports servers in your network.
http://www.alexyscorp.com/products.htm
Rajesh Alex

How to solve problem :- rep-188-Report Server acccepts only Batch jobs

How to solve problem :- rep-188-Report Server acccepts only Batch jobs
Report server :- 10gR1

Hello,
Could you give us some details about the command line ?
What is the value of DESTYPE ?
Regards

How to configure report server in 9iDS

I am usin P4 and trying to configure report server for 9iDS. But, surprisingly there is no conf file in the \orant\reports\server path after complete installation of 9iDS.
How should I configure the report server?
Take care,
Tarek

tarek,
we released a new whitepaper last week about configuring the reports services with iDS for testing your reports. you can find this whitepaper in the reports section here on OTN.
however. you can either create the reports config file manually or it is created automatically for you if you start up a server and there is no corresponding config file already defined.
regards,
philipp

Report server, error code 186

I installed 9ias(http server, forms &report server , oem server) on windows 2000, but the report server don't startup, error code 186. can you tell me how to resolve the problem.

Hi Qiang,
Please check http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=1047650.6 for possible solutions for this error.
Thanks,
Erik

Error while configuring report server

Hi,
I configuring a 10gr1 report server ( midtier).
In the configuration file , when I give the repository username and password..
<!--jobStatusRepository class="oracle.reports.server.JobRepositoryDB">
<property name="repositoryConn" value="repo_db_username/repo_db_password@repo_db_tnsname" confidential="yes" encrypted="no"/>
And try to restart the report server , it does not come up. Are there any additional configuration change to make for this to work.
I am able to connect to the username through sqlplus.
Thanks

In the OC4J~OC4J_BI_Forms~default_island~1 log
09/03/04 13:26:23 Start process
09/03/04 13:26:25 FormsServlet init():
configFileName: /u01/app/oracle/OraHome/midcrd01/forms/server/formsweb.cfg
testMode: false
09/03/04 13:26:25 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
09/03/04 13:26:40 ListenerServlet init()
09/03/04 13:26:45 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:27:09 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:27:32 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:27:35 Stop process
09/03/04 13:27:36 Shutting down...
09/03/04 13:27:39 Start process
09/03/04 13:27:41 FormsServlet init():
configFileName: /u01/app/oracle/OraHome/midcrd01/forms/server/formsweb.cfg
testMode: false
09/03/04 13:27:41 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
09/03/04 13:28:01 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:28:25 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:28:40 ListenerServlet init()
09/03/04 13:28:48 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:28:51 Stop process
09/03/04 13:28:52 Shutting down...
09/03/04 13:28:53 Start process
09/03/04 13:28:55 FormsServlet init():
configFileName: /u01/app/oracle/OraHome/midcrd01/forms/server/formsweb.cfg
testMode: false
09/03/04 13:28:55 Oracle Application Server Containers for J2EE 10g (10.1.2.0.2) initialized
09/03/04 13:29:16 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:29:40 Using oracle.reports.util.EnvironmentGlobal class
09/03/04 13:29:40 ListenerServlet init()
And in the opmn log I have :
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting
OPMN worker process exited with status 4. Restarting

Cannot connect to the reporting server error

Hi,
When trying to process an application, I get the error : "cannot connect to the reporting server".
We have the BPC application server on a machine and DB, SSAS and SSRS (SQL 2008) on another machine.
We don't have a named instance, we use the default one.
If I connect to http://%SQLServer%/reports, it works.
What could be the problem ?
Thank you in advance.

Hi,
we had got the same problem. In the end we:
- Installed RS on the same machine of BPC (Application Server) (please be careful to make a new db if you want to use the same DB Server)
- Configured correctly the server manager to point the new ReportServer
- Edited from SQL Server Management Console the tblAppSetInfo, in order to make the column of the ReportServer of all Application Sets to point to the new report server.
- (not sure was needed) rebooted and restarted all the services
- Tested it and it worked!
HTH
Daniele Tiles

Crystal Report server error

I'm new to posting here, so please bear with me! I have installed, in this order, crystal report server XI R2 .Net server 2005 (used as a viewer for reports in our web application), Crystal report server XI (BO), Crystal Report XI, BO XI SP4 on Windows Server 2003 R2 running as a VM. When I first install crystal report server XI R2 .Net server 2005, open our web app and run Crystal reports, they run just fine. After installing BO XI, Crystal Reports XI and BO SP4, I get an error:
Server Error in '/ImageWorks' Application.
Not enough memory for operation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Not enough memory for operation.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80041004): Not enough memory for operation.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +87
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +279
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +341
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +964
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +73
   roi_AdminReportViewer.Page_Load(Object sender, EventArgs e) +83
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +47
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
I have loaded this same configuration on similar servers over the past 2 years with no issue. Can anyone help me? Doesn't look like the memory is being touched on the server, it's an IIS server with 1.5 GB RAM.

Hi Elaine,
So everything worked fine until you installed CRXI and BO R2 SP4? Let me know if the order of installation I have below is correct:
1. crystal report server XI R2 .Net server 2005
2. Crystal report server XI (BO)
3. Crystal Report XI
4. BO XI SP4
I know the .net viewer is usually set up in the Crystal Reports Server installation. I'm unsure as to why you have it listed separately.
Also which version of BO (Crystal Reports Server) are you installing (R1,R2,R3)?   Could you clearly outline your first 2 installation steps?

Report Server - Error creating Service Application

I am adding a report server to the farm for a customer. This is a SharePoint 2010 Foundation Farm with one SQL server, one SharePoint server and I have just added a Report Server to the Farm.
I installed SharePoint on the report server and added it to the farm. I then installed SQL 2012 Report Services SharePoint Integration Add-on and Database Engine to the Report Server. I added the Report Services and Proxy via PowerShell and everything
seemed to be working. I then configured the Report Services Service Application with the Report database being on the report server and once I clicked submit it just spins and never completed the process. When I look at the event viewer I see three
errors.
Error 1
The Execute method of job definition
Microsoft.ReportingServices.Sharepoint.SharedService.Service.DoWork.TimerJob threw an exception.
The HTTP service located at
http://blablablaReportingServiceBackgroundProcessing.svc is too busy
Error 2
The value of UrlRoot in rsreportserver.config is not valid. The default value will be used instead.
Error 3
An exception occurred while updating address for connected app. The uri endpoint information may be stale.
I also noticed that I can not access reporting services configuration manager. When I go to the reporting service configuration manager and enter the report server as the server name and click find to select the instance I get an error.
Unable to connect to the Report Server "ServerName"

Thank you for moving this question to the correct board and looking into my question.
Here is my setup and what I have done so far.
SharePoint Server 2010 Foundations(Front End & App Server)
Installed the SQL Reporting Services Add-On for SharePoint Products
Installed Reporting Services - SharePoint
SQL 2008 R2 Database Server (original database server for farm)
Did nothing to this server just hold the existing content and config database.
Report Server
Installed SharePoint 2010 Foundations and attached it to the farm.
Ran PowerShell Script to add SQL Reporting Service Application and Proxy
Started SQL Reporting Service
Installed SQL 2012 including the following components
Database Engine Services
Reporting Services - SharePoint
Reporting Services Add-in for SharePoint Products
Management Tools
Created a new Reporting Services Service Application - created a new app pool and used the Report server name as the database for the reports
This is where it would seem to get stuck when I would try to create the service application
I am very familiar with sharepoint but have not added a report server to the farm before. Can you tell me what it is trying to do when it created the service application
Thank you for your time

Crystal Reports Server Error - Unable to cast object of type

Hi Everyone,
Not sure if this is the right place to post this question but couldn't find a Crystal Reports Server section.
After doing a windows update on my crystal reports server the following error now occurs when trying to log into .Net InfoView -
An error has occurred: Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'BusinessObjects.Enterprise.Desktop.InfoView'.
I found the following article which I followed and re-installed the .net components as well as ensured all services are enabled.
Article: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303335333433323337%7D.do
The error still occurs.
I did some further investigation and found that a similar error occurs in the Admin Console when I try and open the Crystal Report DataSources.
This is the error page that comes up
Server Error in '/businessobjects/Enterprise11/WebTools' Application.
Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.
+Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information
about the error and where it originated in the code.+
+Exception Details: System.InvalidCastException:
Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.+
Source Error:
+The source code that generated this unhandled exception can only be shown when compiled in debug mode.
To enable this, please follow one of the below steps, then request the URL:+
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
<%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
<configuration>
   <system.web>
       <compilation debug="true"/>
   </system.web>
</configuration>
+Note that this second technique will cause all files within a given application to be compiled in debug mode.
The first technique will cause only that particular file to be compiled in debug mode.+
+Important: Running applications in debug mode does incur a memory/performance overhead.
You should make sure that an application has debugging disabled before deploying into production scenario.+
Stack Trace:
InvalidCastException: Unable to cast object of type 'CrystalDecisions.Enterprise.InfoObject' to type 'CrystalDecisions.Enterprise.Desktop.Report'.
   +CrystalDecisions.Enterprise.WebContent.WebSamples.DataSources.Common.datasourceInfoFromReports(ArrayList reports) 226
   +CrystalDecisions.Enterprise.WebContent.WebSamples.DataSources.Datasources.Main() 1821
   +ASP.websamples_datasources_datasources_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) 531
   +System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) 98
   +System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) 20
   +System.Web.UI.Page.Render(HtmlTextWriter writer) 26
   +System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) 25
   +System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) 121
   +System.Web.UI.Control.RenderControl(HtmlTextWriter writer) 22
   +System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 2558
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
Any information on how I can fix this is greatly appreciated.
Regards
Paul
Edited by: Paul Griscti on Sep 3, 2008 2:52 AM

I'd try creating a new Application Pool just for running businessobjects and crystalreportviewers11 and nothing else.
Although the apps are .NET, it uses COM Interop for functionality, so using a common app pool with other versions will collide.
Beyond that - if you have a SAP Business Objects support contract - you might open a new SAP Incident ticket.
Sincerely,
Ted Ueda

Unable to connect to report server Error: Message : ErrorCode : 10061

I have configured a report server oracle 10.1.0.2 app server on solaris 10. when the user tries to connect through the front end application web he gets the below error:
Type : System.Net.WebException, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=
Message : Unable to connect to the remote server
Source : System
Help link :
Status : ConnectFailure
Response :
Data : System.Collections.ListDictionaryInternal
Inner Exception
Type : System.Net.Sockets.SocketException, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=
Message : No connection could be made because the target machine actively refused it 10.10.1.180:4444
Source : System
Help link :
ErrorCode : 10061
SocketErrorCode : ConnectionRefused
NativeErrorCode : 10061
Data : System.Collections.ListDictionaryInternal
TargetSite : Void DoConnect(System.Net.EndPoint, System.Net.SocketAddress)
Can anyone please let me know which files or conf files I need to look at.
I did not see any errors in the server trace files. The tnsnames look good. They connect to a oracle DB

In the ssl.conf I put the listen port as 4444 ,
but when I go to the OEM of the report server - ports , it does not show me the port used as 4444 , the field is blank.
is there any place I need to make the port change to 4444
thanks

Acuate 7 Report Server Error

Hi All,
We are getting this Error when i Click on a Report in Thin Client.
Please lets us know is there any other configuration required to see the report.
our reports are working fine in thick client but we are not able to see the report in thin client_+
This error is triggered by the Actuate Reports Server in the following cases:
1. The .ROX file or folder does not exist in the Reports Server Encyclopedia or;
2. User does not have privileges to access the .ROX file or folder.
Please have the system administrator check the Reports Server for the .ROX file or folder. If it is found, then administrator should check the privilege settings.(SBL-RPT-00107)'
ProcessRequest ProcessRequestError 1 0 2012-04-09 05:36:29 (Symbolic URL: ReportsServerImmediateJob) Symbolic URL: 'ReportsServerImmediateJob' Argument: '__executableName' is Required.
Its urgent. Please help.
Regards,
Asif Ansari

its been resolved,the issue was with Xmanager software installed on the windows system.Thnax :)

How to configure report server in 11g ???

hello experts,
i installed the 11g recently. and start converting the 10g form and report successfully.
i start the web logic service. and my application is running.
in 10g i was running the report from form. but same form is using to call the report
below error is comming.
error: frm 41213: unable to connect report server repsrv1
before call the report i start the web logic service: wls_reports
note: in 10 g i was using the server name as : repsrv1
please help me to find the solution.
thanks
yash

hello,
i tried to access the showjobs but its not accessed.
we installed the 11f g one day before. may be we do not configure the report server.
please help me how to confiogure it?
i am accessing the forms with url:
http://192.168.1.1.2:9001/forms/frmservlet/....
but when trying to access reports server
http://192.168.1.1.2:9001/reports/rwservlet/showjobs
its showing error:
404: not found
thanks
yash

Problem in configuring Reports Server. Error-186

Similar Messages

Maybe you are looking for