Problem in configuring scenario

Dear All,
I am working on one scenario in which I am having two different files File1 & File2 in one FTP folder. Once the File1 has been picked and sent to RFC1 and is posted into R/3 then RFC1 will return one message as Y or N. If RFC1 returns Y then File2 should be picked and should be posted into R/3 by RFC2.
I am able to pick the first file but I am not able to make configurations for the second file.
Please suggest.
Regards,
N.Jain

Hi Nishu,
you have to use BPM for your this scenario because without BPM your above scenario is not feasible............
when you will be using BPM, then after the send step of RFC1 you can have a receve step for file2 in your BPM and then you will be able to send it to RFC2 by having another send step in your BPM process.
Regards,
Rajeev Gupta

Similar Messages

  • Problem when creating configuration Scenario

    hi all
    when i Create configuration Scenario use sap XI then it warning that "Error initializing key service (COULD_NOT_GET_KEYSERVICE)" and "The log file for database 'N4S' is full. Back up the transaction  log for the database to free up some log space."
    is it means so many people to use the system?
    and how can i clear this problem?
    thanks!
    marx

    Hi
    User query below to backup and shrink the trasactional logs
    db_name in your case is "N4S"
    db_name_log is the trasctional log file name:Chek this in your case must be like N4S_log
    backup log db_name with truncate_only
    go
    dbcc shrinkfile (db_name_log,0)
    go
    run this query and restart the database
    Ps: If helful pleae reward points

  • Configuration Scenario Builder - Receiver Determination Problem.

    Hi  I am Follows  configurates Integration Scenario to SRM-SUS scenario in XI
    In Model Configuration.  when I try create Object Bottom in Simulation Process .  generate the report show the next message for
    Component View Connection
    Receiver Determination light yellow color  SRD_009 | PurchaseOrderRequest_out
    Analisys ; Requiered Communication Component | SRD_009
                    a receiver determination was found for connection
                    Reciever are missing in the receiver determination found
    Results ;  the reuse receiver determination is already assigned to the configuration scenario
                   the missing receivers were inserted into receiver determination found
                   added receiver communication component SRD_008
    Notes;      Check the conditions for all receivers of the receiver determination. the default result value for the generated condition
                    is TRUE:
    thanks.

    Hi,
    Please verify letter by letter if you haven't make a typo here:
    Default Interface Namespace -- http://mtf
    Default Interface Name -- mtf_mi1
    please also make a test of your scenario in integration directory
    please also do not use best efort quality of service
    /wg
    Message was edited by:
            Wojciech Gasiorowski

  • Configuration Scenario -  Inbound Delivery

    Configuration Scenario
    How can this scenario be best configured on SAP?
    This is how the client receives goods ordered:
    A PO is created and sent to the relevant vendor.  The vendor does not deliver the goods directly to the client; the goods are delivered to a Transporting Company (responsible for delivering the goods to different clientu2019s site). 
    The problem here is monitoring the movements of the ordered material, from the vendor, to the transporting company till to the clientu2019s site.
    The client requires some sort of control mechanisms on the movement of the ordered material from the point of the vendor in terms of when the vendor has sent the material to the transport company , to the point where the  Transporting company  receives the goods , to the point where the goods are being received at the clients site .
    Whats the best way to configure this on SAP .?? Could this problem be solve through the Inbound delivery process , if there is a way please provide full details
    Your help will be kindly appreciated

    Hi,
    Using confirmation control key you can control different types of confirmations. For your scenario I would propose the following:
    - when Vendor issues the product, then initial confirmation (eg. standard 'AB') can be created
    - when products are delivered to transportation company, then inbound delivery (which is also available as confirmation 'LA' type) is created
    - naturally when goods arrive to final destination, goods receipt is posted, in this case against inbound delivery document
    If you do not want to create inbound delivery, you can also create custom confirmation categories that can be entered against PO items directly.
    Regards,
    Dominik Modrzejewski

  • Facing some problem while configuring Workflow Manager 1.0.

    Hi,
    I am facing some problem while configuring Workflow Manager 1.0. in my farm.
    Scenario is,
    I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working. 
    Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually" 
    And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed" 
    If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting")  and don't starts.
    I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups. 
    Also given permission to databases, and assign role of sysadmin and dbcreator to user
    I also tried following steps    
        1) Stop all services associated to workflows
        2) Uninstalled workflow manager
        3) Deleted all databases associated with workflows
        4) Installed workflow manager and tried to configure.
    But showing same error. 
    If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
    We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
    sysadmin, and dbcreator role to local admin.
    I am attaching snapshot of error for better understanding.
    Your help will be very precious to me. 
    Thanks,
    Rajesh
    Rajesh Agravat

    Rajesh
    Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
    Service Bus Message Broker
    Service Bus Gateway
    Workflow Manager Backend
    All of these should be running and your workflow service account should be running all of these.  If any are still configured under the old service account, they'll need to be updated.  Next, check to see what service accounts have access to the
    Workflow Manager 1.0 databases:
    SbGatewayDatabase
    SbManagement
    SbMessageContainer
    WFInstanceManagement
    WFManagement
    WFResourceManagement
    The Workflow Manager service account should be mapped as the DBO for all of these.  if any are still configured under the old service account, they'll need to be updated.
    Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation.  Do it thus:
    Launch Workflow Manager Configuration Wizard
    Select the Leave Workflow Manager Farm
    Stop all workflow services (see above list)
    Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
    Delete all Workflow Manager databases (see above list).
    reboot.
    Start new installation.

  • Assignment in Configuration Scenario Disabled

    Hello,
    I have difficulties in configuring the configuration scenario.
    This Scenario previously runs normally, and so is other scenarios existed.
    But this day this unwanted condition happen, suddenly, last action i did was add new component to the Bs. System and generate the objects.
    When i open MODEL CONFIGURATOR, the assigned component are all missing.
    moreover, the assign component status and configure connection are also mark red traffic light, means not assigned.
    Meanwhile, in OBJECTS tab, the components, and related objects are completely listed.
    I tried to re-assign one Business System ( and also automatically Receiver and Interface Determination related to it).
    But when i click generate button, the START button is disabled. Seems that the PI not allowing me to generate the objects.
    How this thing can happen?
    If I delete the Business System, as long this problem still occurs, am afraid i couldn't re-assign the Business System again to Configuration Scenario.
    Kindly need your advice.
    Regards,
    Tiara.

    Yes, i have full access to edit and create the objects.
    I also do last update 2 days ago, but somehow, the Model Configurator turns wrong this day.
    I can't find the causes since i check all are ok, and so the Enterprise Builder Namespace.
    Do you know why?
    Regards,
    Tiara.

  • PI 7.11 Configuration Scenario Tables

    Hi everbody,
    regarding "Configuration Scenario", does anybody know in which database the information of the tree view in the Integration Directory is stored?
    Thanks in advance
    Hartmut

    Hi,
          You can refer the foll link for java stack tables :
    http://wiki.sdn.sap.com/wiki/display/XI/XI+Tables
    Regards

  • Problem in configuring Terms of Payment

    Hello Friends,
    I'm facing a problem during configuration of payment terms in which i give 15% discount to the customer if paid within 15 days & also the credit period is 15 days for net payment. When i try to configure the same i get an error message FC114 - Enter periods in ascending order, since the cash discount period & the credit period are the same.
    Payment Terms - Within 15 days 15% discount, Within 15 days due net
    Request your assistance.
    Regards,
    Padmanabhan

    Hi Padmanabhan,
    your requirement is not clear, for both the options are on the same day, there should be some difference in days for a discount and net payments in any business, try to collect correct requirement from your client. It may be further 15 days from the due date for discount, then it becomes 30 days.
    How do you offer both options to your customers, in any business i did not heard such terms,
    correct me if i am wrong.
    Bye
    Venkat Cheedalla.

  • Error while importing Configuration Scenario

    Hi  guys
    When I try to import a Configuration Scenario from DEV to QAS, I get the following error.
    CC_xxxxxx is already locked in change list Standard Change List by user xyz Activate or reject the change to object Communication Channel: * | ERQ_BS | CC_xxxxxx and restart the import
    I went to the Lock Overview from Administration, of both DEV and QAS and I don't see any objects locked under that particular user. Why do I get this error ?
    I removed that particular CC from the Configuration Scenario and imported again. I still get the same error and this time, it pointed out to another CC in my Configuration Scenario.
    Regards

    Thanks Shabarish,
    It worked and thanks to everyone who helped me.
    I went to the " Change List" tab in QAS, I got this error in QAS, and assigned all the open items in the above user id to my userid and opted Reject changes. Then I imported again and it worked.
    Regards

  • Getting Error  in I.D  while Importing a Configuration Scenario

    Hi ,
         I'm traying to import a  Configuration scenario . after choosen the scenario from teh Imported Objects it was giving the Error message  java.lang.NullPointerException  .
    Any specific reason is there for this or can any body suggest me the solution.
    Regards
    Jain

    Hi Swarup & Sandeep,
       Previously i had imported a Configuration Scenario  that was imported successfully .recently we deployed  some  .sda file for JDBC drivers for connecting  legacy systems. and after that now I'm unable to Import any scenarios
    Please suggest me  .
    Regards
    Jain

  • Problem with configuration of wifi newtork- dhcp

    hi.
    i've got a small problem with configuration of wi-fi network.
    i use dhcp network.
    there are some errors about network during boot up (but its to fast for my to write it down)
    after log-in i have to setup network access by typing
    iwconfig eth2 essid SpeedTouchBCE72F
    and then i heve to run this command
    dhclient
    and after that i've got an access to internet
    this is my rc.file
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="pl_PL.UTF-8"
    HARDWARECLOCK="localtime"
    TIMEZONE="Europe/London"
    KEYMAP="-u pl2"
    CONSOLEFONT="lat2-16.psfu.gz"
    USECOLOR="yes"
    LC_ALL="pl_PL.UTF-8"
    LESSCHARSET="UTF-8"
    # HARDWARE
    # Scan hardware and load required modules at bootup
    MOD_AUTOLOAD="yes"
    # Module Blacklist - modules in this list will never be loaded by udev
    MOD_BLACKLIST=()
    # Modules to load at boot-up (in this order)
    #   - prefix a module with a ! to blacklist it
    MODULES=()
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    HOSTNAME="linugrat"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
    # interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    #   - prefix an entry in INTERFACES with a ! to disable it
    #   - no hyphens in your interface names - Bash doesn't like it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    eth2="dhcp"
    INTERFACES=(lo eth2)
    ROUTES=(!gateway)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    #   - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(gateway)
    # Enable these network profiles at boot-up.  These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    #   - set to 'menu' to present a menu during boot-up (dialog package required)
    #   - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network-profiles
    #NET_PROFILES=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    #   - prefix a daemon with a ! to disable it
    #   - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng ipw3945d network netfs crond)
    # End of file
    szymon

    Hi Mariano
    I think you need to <b>restart your portal Engine</b> after making correct settings.
    Also please refer to the link below to get a better insight:-
    http://help.sap.com/saphelp_nw04s/helpdata/en/0b/719a425ffac46ae10000000a155106/frameset.htm
    Regards
    Navneet

  • Changing the Model Configurator in configuration scenario

    Hi SapAll.
    i have got a tricky situation where i didnt filled the communication channel parameter in the existing Model Configurator under Connections from Component Assignment(tab)  of  configuration scenario m,so i just want to know on how i can make the Model Configurator (configuration scenario) in edit mode so that i can assign the communication channel under Connections from Component Assignment(tab) in model configurator of Configuration scenario .
    will be waiting for your response.
    regards.
    Varma.

    If you are using PI 7.1. Just open ur configuration scenario in edit mode. Go to 'ES Repository Model' tab and choose 'Model Configurator' for your configuration scenario. It ll open in edit mode.

  • Problem in configuring sunoneportal

    Hi all,
    I am installing Sun java portal server 7 with JES 5 on windows xp and having problems in configuring it when i want to login to portal server console login then the authentication fails .I checked the log file I found this two exceptions
    #|2007-10-25T15:08:00.303+0200|WARNING|SJS Portal Server|debug.com.sun.portal.admin.server|ThreadID=13; ClassName=com.sun.portal.admin.server.PASMechanism; MethodName=parse; |PSAD_CSPAS0000 : Exception stack trace for the message above
    com.sun.identity.authentication.spi.AuthLoginException: Failed to create new Authentication Context: Naming Service is not available.
         at com.sun.identity.authentication.AuthContext.login(AuthContext.java:516)
         at com.sun.identity.authentication.AuthContext.login(AuthContext.java:356)
         at com.sun.portal.admin.server.PASMechanism.parse(PASMechanism.java:169)
         at com.sun.cacao.agent.auth.CacaoCallbackHandler.handle(CacaoCallbackHandler.java:98)
         at com.sun.jdmk.security.sasl.plain.PlainServer.verifyAuthenticationCredentials(PlainServer.java:186)
         at com.sun.jdmk.security.sasl.plain.PlainServer.evaluateResponse(PlainServer.java:118)
         at com.sun.jmx.remote.opt.security.SASLServerHandler.consumeMessage(SASLServerHandler.java:124)
         at com.sun.jmx.remote.opt.security.AdminServer.connectionOpen(AdminServer.java:176)
         at com.sun.jmx.remote.generic.ServerSynchroMessageConnectionImpl.connect(ServerSynchroMessageConnectionImpl.java:51)
         at javax.management.remote.generic.GenericConnectorServer$ClientCreation.run(GenericConnectorServer.java:383)
         at com.sun.jmx.remote.opt.util.ThreadService$ThreadServiceJob.run(ThreadService.java:208)
         at com.sun.jmx.remote.opt.util.JobExecutor.run(JobExecutor.java:59)
    java.lang.NoClassDefFoundError: Could not initialize class com.iplanet.services.naming.service.NamingService
         com.iplanet.services.naming.WebtopNaming.updateNamingTable(WebtopNaming.java:690)
         com.iplanet.services.naming.WebtopNaming.getNamingProfile(WebtopNaming.java:603)
         com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:405)
         com.iplanet.services.naming.WebtopNaming.getServerID(WebtopNaming.java:381)
         com.iplanet.services.naming.WebtopNaming.getAMServerID(WebtopNaming.java:159)
         com.iplanet.dpro.session.Session.<clinit>(Session.java:317)
         com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:100)
         com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:242)
         com.iplanet.am.console.base.ConsoleServletBase.checkAuthentication(ConsoleServletBase.java:352)
         com.iplanet.am.console.base.ConsoleServletBase.validateSSOToken(ConsoleServletBase.java:238)
         com.iplanet.am.console.base.ConsoleServletBase.onBeforeRequest(ConsoleServletBase.java:188)
         com.iplanet.jato.ApplicationServletBase.fireBeforeRequestEvent(ApplicationServletBase.java:1105)
         com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:591)
         com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:860)could any one help ? thanks

    The easiest way to get Portal to run on Windows is by using the pre-configured zip file distribution. You simply unzip the file and run a quick setup script and then the entire portal with three samples is up and running. The JES installer is not needed.

  • Problem in configuring third party JMS provider

    Hi,
    I am having a problem in configuring Sun MQ 4.4 JMS provider with weblogic 10.3.I tried the following method:-
    1. Created a new outbound connection pool.
    2.In the properties for the connection pool :-
    ConnetionFactory Location :- myTestCF (this is the remote connection factory JNDI)
    Factory properties :- java.naming.factory.initial=com.sun.jndi.fscontext.RefFSContextFactory;java.naming.provider.url=file:/C:/my_object_store;java.naming.security.principal=admin;java.naming.security.credentials=admin
    3.Provided the username and password also.
    But when I am testing it from a SOA composite through a JMS adapter, it is giving me an exception indicating it could not locate the connection factory.I am clueless why this is happening.I've also tried with putting the sun mq jar files inside the <%wl_home%>/user_projects/domains/<%my_domain%>/lib folder.But it did not work.Please help.
    Thanks,
    Rahul

    In third party process SO / PR / PO should be in integrity. Your manual modification violates this I think (you are making one PO item from two SO item...).
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/dd/560287545a11d1a7020000e829fd11/frameset.htm
    Processing Third-Party Orders in Purchasing
    When you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
    Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
    All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order.
    Regards,
    Csaba

  • Configuration Scenario for BPM Using Integration Scenario

    hi All,
    I Have an Scenario where i am using BPM. Most of the blog tells about manually creating all Configuration objects. I had created an Integration Scenario for this scenario by referring to the earlier threads available for same.
    Hoe to Create Integration Scenario for BPM Scenario
    Integration Scenario in BPM  and few more.
    My IS looks like
    Sender App Component - Integration Process - Receiver App Component
    Now when i am trying to create Configuration scenario for same using model configurator, i am getting Model as "Not Configurable"
    And when i click "Configurability Check" Button, i am getting below as status:
    Component view IS_POC_BPM: Connection from receivePayload to getABSPayload does not have an inbound service interface
    Component view IS_POC_BPM : Connection from sendABSPayload to getPayload has no outbound interface
    getABSPayload and sendABSPayload are actions for Abstract interfaces.
    IS_POC_BPM is the Integration Process Name.
    Also in Integration Scenario, when i create connection between sender action to BPM action there is no inbound interface coming. And viceversa.
    Please help me in identifying if i am doing any thing wrong in creating this scenario.
    Is it possible to create Configuration Scenario for BPM Using Integration Scenario?
    Thanks,
    Mayank
    Edited by: Mayank  Gupta on Apr 21, 2010 6:35 AM

    I think you shoudl refer the available Integration Scenarios created for BPMs in IR --> SAP BASIS --> http://sap.com/xi/XI/System/Patterns
    Sender template will have the Action with Outbound Service Interface and then in the BPM Template the action will have Inbound Interface.....then within the BPM itself this inbound will be mapped to Action with Abstract Interface
    may be after looking the Integration scenarios you will get more idea
    Regards,
    Abhishek.

Maybe you are looking for