Problem in connecting to remote site

I have set up an FTP user in the remote server which works
perfectly fine when I click test connection. Now when I click the
remote view or upload a file or connect to remote server I get this
message -"Waiting for server" then I get this error message
"Connection to the remote host is lost.Click the Connect button to
reconnect". I have disabled my firewall too. This has been driving
me crazy for a long time. Any source of help would be of great
help.
Thanx in advance.

What do you have in the Host directory field of your Remote
site's
definition? It sounds like you don't have the right
information here....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"surenr" <[email protected]> wrote in
message
news:e2b9k2$eab$[email protected]..
>I tried using passive FTP in the remote dite definition.
It seems to be
>working
> but I am not able to view any of the remote site folders
or upload any
> files.
> When I click the test button I get this message:
Macromedia Dreamweaver MX
> successfully connected to your web server.
>
>

Similar Messages

Connection from remote sites (Frame Relay WAN) to AS/400 dissapears

Hello,
We have the following problem appearing in our environment:
All connections from remote sites dissapears unexpected from AS/400. After 2-3 minutes remote users get normal connectivity again.
The environment is the the following:
Frame Relay/ATM WAN (Frame Relay on remote sites and ATM in datacenter) comes to Cisco 7204VXR router which connected to LAN switch with 10/100/1000 ports. AS/400 with Fast Ethernet interface also connected to the similar LAN switch. CEF is enabled on the router, IOS version 12.4.3a. We have ETHSTD *ALL parameter set on AS/400. Remote users uses TCP/IP and Telnet but there are a number of 5494 controllers wich uses SNA.
We got the problem for the first time after we enabled CEF on the router.
I suspect that the cause of problem is Ethernet frames of different standards due to ETHSTD *ALL, but can neither reproduce the problem nor understand why it behaves so.
Have anybody had similar problem?
I would be very thanksfull if somebody can help me to solve it.
Thank you in advance.
//Mikhail Galiulin

Hi Martin,
Cisco 7200 itself can access AS/400 as well as all other hosts in the same with AS/400 LAN. There is no any outage in communications which goes to another LAN segment via Netscreen firewall while the communication via Cisco is down. Only those hosts which connected via Cisco are experiencing the problem. I can not say where the traceroute from AS/400 stucks (there are other people who maintain the machine and they never could catch the exact moment of outage).
To turn off CEF I treat as the last option actually and unfortunatelly there is no guarantee that software upgrade will help (we have 12.4.3a now).
So first of all I'm trying to understan WHY it happens because I can not see any systematics in the problem appearance. It can happen 3 times under 2 days and then dissapear for 1-2 months...
//Mikhail Galiulin

Deploying unity connection at remote site with CUCM at central site

I am planning to deploy Unity connection at remote site while the CUCM is at central site only. Will appreciate of someone can shd some light on this, has anyone already deplyed same scenario , any specific requirements to take care of please ?
Thanks in advnace,
AB

AB,
Yes, having your Unity Connection server at a different location than your CUCM is supported.
I cannot really help you with specifc requirements as it largely depends on exactly how you intend to deploy it and what features you intend to enable. Clustering, Digital Networking, Unified Inbox, etc.. all have their own additional requirements the whole of which would not fit into a message board post.
However, specific bandwidth and latency requirements are listed in the "System Requirements for Cisco Unity Connection Release 8.X. http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html
The SRND and the System Requirements should get you on the right track. I would encourage you to read both documents fully and then come back with any specific design questions you may have.
-Steven

Java.sql.SQLException: Connection to remote site no longer valid

Hi
Somebody can help me with this ?
java.sql.SQLException: Connection to remote site no longer valid
Sometimes this error message appears in the moment when the next code execute, the database is Informix 10
public BeanOutParametersSMS siantelSMS(BeanArgumentsSMS bean)
throws SQLException, NumberFormatException,
NullPointerException, Exception {
String sql = "execute procedure SP_SMS_MKT(?,?,?,?,?,?,?,?,?)";
CallableStatement cs = null;
ResultSet rs = null;
BeanOutParametersSMS out = new BeanOutParametersSMS();
String salesForce = "";
try {
cs = connection.prepareCall(sql);
s.setString(1, bean.getAction());
cs.setString(2, "R0" + bean.getRegion());
cs.setString(3,bean.getCveclientesms());
cs.setString(4,bean.getPuerto());
cs.setString(5,bean.getCveproducto());
if (cs.execute()) {
rs = cs.getResultSet();
if (rs.next()) {
out.setActionInvoked(rs.getString(1));
out.setCode(rs.getString(2));
out.setPuerto(rs.getString(3));
out.setCveproducto(rs.getString(4)); etc ....
note. The stored procedure connecting with two databases (informix 10 & informix 9)

Where do you close the connection and statement/result set?

DW CS3- Cant Connect To Remote Site

Hi
Ive encountered a very fustrating problem.
The new Dreamweaver refuses to connect to any remote sites.
It imported my site list, with FTP info, user names and
passwords...but when I try to connect, I get a big error message
telling me that my info is wrong, or my settings are wrong, or that
the remote server is unplugged, etc etc.
This happens with every site on my list, and it happens when
I try setting up the site info from scratch.
Using the same info, I can connect using Dreamweaver MX 2004,
so I know the basic info is correct.
Does anyone have a guess what's wrong here? Has there been
some fundamental change to site management Im unaware of?
Any help is much appreciated!

Send me your connection info offlist, and I'll try to get you
going.
forums at great-web-sights dot com
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"yakcat" <[email protected]> wrote in
message
news:f32kcr$ruh$[email protected]..
> Hi
>
> Ive encountered a very fustrating problem.
>
> The new Dreamweaver refuses to connect to any remote
sites.
>
> It imported my site list, with FTP info, user names and
passwords...but
> when I
> try to connect, I get a big error message telling me
that my info is
> wrong, or
> my settings are wrong, or that the remote server is
unplugged, etc etc.
>
> This happens with every site on my list, and it happens
when I try setting
> up
> the site info from scratch.
>
> Using the same info, I can connect using Dreamweaver MX
2004, so I know
> the
> basic info is correct.
>
> Does anyone have a guess what's wrong here? Has there
been some
> fundamental
> change to site management Im unaware of?
>
> Any help is much appreciated!
>
>
>

Issue with Serial Connection between remote sites

I'll try to keep this brief. If you need any additional information, let me know.
Basically, we have a 56K connection to one of our remote sites (it's all that's available). We recently purchased a new 2911 router and are consolidating a couple of routers into just this one. We purchased a 56K CSU/DSU WIC to go with the new 2911 router. This WIC is replacing a Cisco 1602 with an onboard CSU/DSU. The remote is also a 1602.
Here is the output from the sh int Serial 0/2/0 on the new router with the WIC. I just reset the counters and started the process over and things are working great, but what's odd is that the connection will be just fine for perhaps a day and then start to go downhill. The total output drops starts to shoot up as do the carrier transitions and interface resets, but not quite as much.
interface Serial0/2/0
description YANKTONSG_LAN
ip address 192.168.134.1 255.255.255.0
service-module 56k clock source line
service-module 56k network-type dds
no ip route-cache
end
And here is the sh int Serial 0 from the remote router as well as the config for the Serial interface.
interface Serial0
ip address 192.168.134.2 255.255.255.0
no ip directed-broadcast
no ip route-cache
service-module 56k clock source line
service-module 56k network-type dds
I repeatedly called the provider to have them check the circuit at the remote location and that has tested out just fine. Any ideas of what I could start looking at?
Thanks!

hi Spently,
Thanks for your posting!
According to your description, I have confused about your service bus, it seems that this issue is more related to Service Bus for Windows Server.
I recommend you could post this issue on Azure Pack forum(https://social.msdn.microsoft.com/forums/azure/en-US/home?forum=windowsazurepack ) for better support.
If I am misunderstanding your meaning, please let me know free.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

AnyConnect Client/Remote Site-to-Site connect to Remote Site-To-Site via HQ Hairpin.

I'm trying to get my Remote Sites and my Remote AnyConnect Clients to be able to communicate with each other.
Remote ASA5505 <--> ASA5510 HQ <--> Remote ASA5505
AnyConnect <--> ASA5510 HQ <--> Remote ASA5505
The ASAs are running 8.3(2)
I've googled many of the Hairpin configs, and have the 'same-security-traffic permit intra-interface' command in the Config, which it is and then having the proper NAT exclusion in there. Many of the config examples seem to reference the deprecated NAT commands that do not work on 8.3(2)
I have in the Config
object network Network-HQ
subnet 10.0.0.0 255.255.0.0
object network Network-Site1
subnet 10.1.0.0 255.255.0.0
object network Network-Site2
subnet 10.2.0.0 255.255.0.0
object network Network-Site3
subnet 10.3.0.0 255.255.0.0
object network Network-AnyCon
subnet 10.100.0.0 255.255.0.0
object-group network REMOTE_NETWORK
network-object object Network-Site1
network-object object Network-Site2
network-object object Network-Site3
network-object object Network-AnyCon
object-group network LOCAL_NETWORK
network-object object NETWORK-HQ
nat (inside,outside) source static LOCAL_NETWORK LOCAL_NETWORK destination static REMOTE_NETWORK REMOTE_NETWORK
nat (outside,outside) source static REMOTE_NETWORK REMOTE_NETWORK destination static REMOTE_NETWORK REMOTE_NETWORK
same-security-traffic permit intra-interface
I also have an Access List on the Outside Interface
access-group outside_access_in in interface outside
So I toyed around with access-Lists too and Added the following:
access-list outside_access_in extended permit ip object-group LOCAL_NETWORK object-group REMOTE_NETWORK
access-list outside_access_in extended permit ip object-group REMOTE_NETWORK object-group REMOTE_NETWORK
access-list outside_access_in extended permit ip object-group REMOTE_NETWORK object-group LOCAL_NETWORK
Still No Love.
In the Configs that used the deprecated NAT they also mentioned that the NAT statements needed to be first in the list. I'm not sure how to order them.
Any Suggestions would be helpful.
Thanks!

Please remove this object from REMOTE_NETWORK
object-group network REMOTE_NETWORK
no network-object object Network-AnyCon
Lets say this: 10.1.0.10 is permitted to access via the tunnels to all remote-LANs via site-to-site tunnels.
Lets create a dynamic-nat, so that your remote-in clients can access remote-lans as if they are coming from HQ directly.
object network HQ-UNUSED-IP
description: this is permited to traves to remote all sites
network-object host 10.1.0.10
nat (outside,outside) source dynamic Network-AnyCon HQ-UNUSED-IP destination static REMOTE_NETWORK REMOTE_NETWORK
Please remove these below lines, because tunnel bound traffic does not go via the acl filters put on outside interface.
no access-list outside_access_in extended permit ip object-group LOCAL_NETWORK object-group REMOTE_NETWORK
no access-list outside_access_in extended permit ip object-group REMOTE_NETWORK object-group REMOTE_NETWORK
no access-list outside_access_in extended permit ip object-group REMOTE_NETWORK object-group LOCAL_NETWORK
Hope this helps.
Thanks
Rizwan Rafeek

Problem in connecting to the site

I want to post user id and password to enter into the Home page of a site using java.
The problem is that I receive the same login page after the HttpURLConnection to the site posting with user id and password.my code doesn't work.
First, i authenticate the user sending a post request with the login and password in the browser. The server responds with a cookie.If i use this cookie(jsessionid value) in my code (hard code the cookie from browser) then server redirects to the homepage. But when I retrieve cookie dynamically from my code and use this cookie to enter into the home page then it redirects to login page.(like the following code). It doesn't work.
               URL url = new URL(1stURL);
               HttpURLConnection conn = (HttpURLConnection)url.openConnection();
               conn.setDoInput(true);
               conn.setDoOutput(true);
               conn.setRequestMethod("POST");
               Map headers = conn.getHeaderFields();
               List values = (List) headers.get("Set-Cookie");
               String cookies = values.toString();
                  url = new URL(sndURL);
               HttpURLConnection conn1 = (HttpURLConnection)url.openConnection();
               conn1.setRequestProperty("Cookie", cookie);
               conn1.connect();How will I login to the home page programmatical. Please advice.

Have you tried all of the suggestions in this Apple support document? If not, it's a good place to start.
Can't connect to the iTunes Store
B-rock

Connecting Multiple Remote Sites with VPN Passthrough

I have several Win2003SBS sites requiring VPN passthrough from remote clients some using the VPN Connectoid supplied with the SBS (on the RWW - "Download Connection Manager". The requirement is for an DSL modem router with at least 10 tunnels which also supports GRE. The device should support ADSL2 as a minimum and SDSL is preferred.
A more detailed diagram is attached. Access to the Web Server will be required from both the LAN and WAN sides later.
Any suggestions please?

3700 Series multiservice access routers supports GRE, SDSL, ADSL.Refer the following URL for more information
http://cisco.com/en/US/products/hw/routers/ps282/products_data_sheet09186a00800921f0.html

Am having trouble connecting to remote site via FTP in DW CS6

It is asking for a SERVER NAME... What is that supposed to be ?? [First line in remote connection setup]

Did you define your site in DW yet?
Site > New Site or Manage Sites...
Your hosting provider sent you log-in credentials when you signed-up for hosting. Refer to that e-mail for the correct info to enter under Servers. See screenshot.
Nancy O.

Problem while connecting to remote corba service

Hi, all.
I'm new to Tuxedo/CORBA and want to run sample application. I follow all the instructions and everything's fine when I'm looking for local machine:
Tobj_Bootstrap bootstrap(v_orb.in(), "");
but when I'm lookin for remote service
Tobj_Bootstrap bootstrap(v_orb.in(), "/ /MYHOST:2500");
than running
simple_client -ORBid BEA_IIOP
I'm getting
Can't connect to the domain : IDL:beasys.com/Tobj/InvalidDomain:1.0
What went wrong? How can I use corba service on remote machine?\
Thanks, Oleg.
[att1.html]

Hello, Peter.
1. yes, my ubb-file contains ISL server listening process on
file://MYHOST:2500 <file://MYHOST:2500>
2. yes, ISL process booted successfully.
3. yes, there's a ping to MYHOST.
Here's my ubb file:
*RESOURCES
IPCKEY 55432
DOMAINID simpapp
MASTER SITE1
MODEL SHM
LDBAL N
*MACHINES
"MYHOST"
LMID = SITE1
APPDIR = "D:\bea\tuxedo8.0\samples\corba\simpapp"
TUXCONFIG =
"D:\bea\tuxedo8.0\samples\corba\simpapp\results\tuxconfig"
TUXDIR = "d:\bea\tuxedo8.0"
MAXWSCLIENTS = 10
*GROUPS
SYS_GRP
LMID = SITE1
GRPNO = 1
APP_GRP
LMID = SITE1
GRPNO = 2
*SERVERS
DEFAULT:
RESTART = Y
MAXGEN = 5
TMSYSEVT
SRVGRP = SYS_GRP
SRVID = 1
TMFFNAME
SRVGRP = SYS_GRP
SRVID = 2
CLOPT = "-A -- -N -M"
TMFFNAME
SRVGRP = SYS_GRP
SRVID = 3
CLOPT = "-A -- -N"
TMFFNAME
SRVGRP = SYS_GRP
SRVID = 4
CLOPT = "-A -- -F"
simple_server
SRVGRP = APP_GRP
SRVID = 1
RESTART = N
ISL
SRVGRP = SYS_GRP
SRVID = 5
CLOPT = "-A -- -n file://MYHOST:2500 <file://MYHOST:2500> "
*SERVICES
This file is not modyfied than one, proposed by the sample.
Everything is perfect as long as I pass empty string to bootstrap object
constructor. But when I try to pass file://MYHOST:2500
<file://MYHOST:2500> to constructor and running
simple_client -ORBid BEA_IIOP
- I'm getting exception:
Can't connect to the domain : IDL:beasys.com/Tobj/InvalidDomain:1.0
Maybe I should do smth specific in order to listen to network
connections?
Thanks, Oleg.
"Peter Holditch" <[email protected]> wrote in message news:[email protected]...
Oleg,
3 thoughts...
Does your ubbconfig contain an ISL server listening on //MYHOST:2500?
Did the ISL boot successfully?
Is the dns working from the client machine? (can you ping MYHOST, or better telnet MYHOST:2500?)
I hope that helps!
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Oleg Fainitsky wrote:
Hi, all.
I'm new to Tuxedo/CORBA and want to run sample application. I follow all the instructions and everything's fine when I'm looking for local machine:
Tobj_Bootstrap bootstrap(v_orb.in(), "");
but when I'm lookin for remote service
Tobj_Bootstrap bootstrap(v_orb.in(), "/ /MYHOST:2500");
than running
simple_client -ORBid BEA_IIOP
I'm getting
Can't connect to the domain : IDL:beasys.com/Tobj/InvalidDomain:1.0
What went wrong? How can I use corba service on remote machine?\
Thanks, Oleg.
[att1.html]

Problem while connecting to remote corba server

Hi, all.
I'm new to Tuxedo/CORBA and want to run sample application. I follow all the instructions and everything's fine when I'm looking for local machine:
Tobj_Bootstrap bootstrap(v_orb.in(), "");
but when I'm lookin for remote service
Tobj_Bootstrap bootstrap(v_orb.in(), "/ /MYHOST:2500");
than running
simple_client -ORBid BEA_IIOP
I'm getting
Can't connect to the domain : IDL:beasys.com/Tobj/InvalidDomain:1.0
What went wrong? How can I use corba service on remote machine?\
Thanks, Oleg.
[att1.html]

Hi, all.
I'm new to Tuxedo/CORBA and want to run sample application. I follow all the instructions and everything's fine when I'm looking for local machine:
Tobj_Bootstrap bootstrap(v_orb.in(), "");
but when I'm lookin for remote service
Tobj_Bootstrap bootstrap(v_orb.in(), "/ /MYHOST:2500");
than running
simple_client -ORBid BEA_IIOP
I'm getting
Can't connect to the domain : IDL:beasys.com/Tobj/InvalidDomain:1.0
What went wrong? How can I use corba service on remote machine?\
Thanks, Oleg.
[att1.html]

New Apple TV has 2 problems - internet connection and remote disk

Hi,
I have a TimeCapsule as main router, connected to a wired Modem for Internet access. My PowerBook G4 connects to it wirelessly using WPA2 no problems connecting to the internet and the TC disk.
I've just added and synced my new Apple TV which has thrown up 2 problems, not sure if they're related: after copying the WPA2 password, ATV connected successfully to the network, but can't find the internet. It has a correct IP address on the network, I checked that in settings. As it can't find the internet, it can't register for my iTunes account, so can't sync protected content.
On top of that it has problems syncing items on the TC Drive: I have my main iTunes library on the PowerBook G4 hard-disc, and that part synced fine, but most of my movies and TV Shows are stored on the TC disk due to lack of space on the PB. Although they're in exactly the same format as the items on the PB, when I synced, I got an error saying the file type was not compatible with ATV, so iTunes obviously has problems syncing items on the TC although it plays them fine on the PB (well it takes a bit of time connecting, but provided the TC is turned on, it plays them fine). I don't fancy moving them one by one onto the PB, syncing, deleting, etc so I need to get that fixed.
Any idea on why either problem happens, and whether they're related?
Thanks in advance.
Nadine xxx

The modem is an ethernet modem connected directly to the Time Capsule, not the Powerbook.
I checked my ITunes account, it says 3 devices can play my purchased material, so that would be my PowerBook, iPod, Work PC - AppleTV missing. I need to somehow kick it into connecting to Apple's Servers and registering with them, which it obviously didn't do at the initial setup.
The Network issue seems resolved - I started playing one of the movies that wasn't syncing on the PowerBook, which started the Network Disk, the sync obviously didn't try prompting the drive to wake up. It seems to be synching those films now (which obviously takes ages, so can't check for sure until later).

Problem with connecting to a website. Just purchased a new iMac with Version 10.10.2 Yosemite. Once in a while I have trouble connecting to a site. It takes forever. Is this an issue with Yosemite or my internet service?

I purchased this iMac in Feb. 2015. When I try to connect to a web site using Safari or Google Chrome I usually have no problems getting connected to the site. But maybe once a day I will try to connect and I will see the blue progress bar at the top of the screen showing it is trying to connect and then it just stops. It may take a couple of minutes before it connects to the site.
Would this be a problem with OS X Yosemite Version 10.10.2 ? Or would this be a problem with my internet company?
Thank you,
Laurie

Hi lauriefrommi,
Welcome to the Apple Support Communities!
i understand that you have some intermittent webpage loading issues while using Safari on your Mac. In this situation, to ensure that Safari is working as it should, I would suggest reading over the attached article and using the information to make sure Safari has no unsupported third-party add-ons.
Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues - Apple Support
Best regards,
Joe

Problem in connecting remote server using Applet?

Hello everybody,
I am facing problem in connecting to remote server using Applet in browser. I am using JDK 1.5.0_12 and running the application on apache 2.2.
Firstly I have tried with simple jar file which could not connect to remote server and throws permission denied than now I am trying with signed jar file but also not working. I have changed the java.policy file of JDK in server with grant all Permission but also it throws "java.security.AccessControlException:access denied(java.net.SocketPermission 127.0.0.1:1521 connect, resolve)".
Can anybody suggest me how to solve this problem?
Thank You.
-Ritesh

>
I am facing problem in connecting to remote server using Applet in browser.
Firstly I have tried with simple jar file which could not connect to remote server and throws permission denied than now I am trying with signed jar file but also not working. >Were you prompted to accept the digitally signed code? To see what I mean, check out the [Defensive loading of trusted applets demo|http://pscode.org/test/docload/]. If you are not getting the prompt, or refused it, follow the link to sandbox.html for tips on how to proceed.

Problem in connecting to remote site

Similar Messages

Maybe you are looking for