Problem in connecting to Sap R/3 system through Crystal Reports

Hi
while I am connecting to Sap R/3 system through crystal reports i am getting an error
(" you do not have a necessary rights to design reports against sap system ")
can anyone sort out this problem?
Thanking in advance

you need to add some transport files while installing the integration kit for sap solutions.check whether all transport files are added

Similar Messages

Problem in connection from SAP to XI

Hi Guys,
I have problem to connect from SAP to XI. We have existing SAP R/3 (IS-H) and we newly installed XI. We decided to use ABAP proxy to send data from SAP to XI. When I go to SPROXY system showing No Connection to Integration Builder. Please kindly advice what configuration we need to in SAP side in order to connect XI.
Its Very Urgent. Please advice me.
Thanks in Advance.
Regards,
Anil.

Anil,
could you please have a look to SAP Note 689847 - XI 3.0: SPROXY - No connection to the Integration Builder
Cheers,
-Sunil

Connection from SAP to our systems involving 2 saprouters

connection from SAP to our systems involving 2 saprouters
we have 1 saprouter inside a dmz and another for connecting to our systems.
we are guessing that this is possible
SAP (sapserv2) -
SNC----> saprouter1 (DMZ, SNC connection) -
> saprouter2 (P * * 3200) ---> SAP1, SAP2...
But how could we do that?
How can we let SAP know that they need to connect to 2 saprouters instead of 1?
The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
And how should be the saproutettab of the 2 saprouters?
saprouter1:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
P * saprouter2 3299
saprouter2:
P * * 3200
P * * 3600
is that possible?
Many thanks !!

Hi
As far as my experience goes with this you have to maintain both router information in oss1 tcode
Also mention second router on the second router tab on the SMP data
I hope it should work with that as it will automatically create router table

Connection to SAP R/3 46B through EP

Hi All
I installed following products but don't know how to connect SAP R/3 system through webdynpro.
EP : 6.0 SP10 (Only Java instance)
OS : Windows 2000
DB : Oracle 9i
R3 : Version 46B BASIS SUPPORT PACK 30
OS : Solaris 8
DB : Informix 7.31 fd2x9
Am new to NETWEAVER programming my desire is to connect
SAP and fetch data from SAP pl guide me.
Thanks in advance
Sanjay

...and for "classical" portal development (i.e. PAR files), first create a system object in system administration --> system configuration --> system landscape and set all configuration parameters for your R/3 system accordingly there.
Next decide on you you like to implement SSO to this system (user mapping or SAP logon tickets). For the latter one, some additional steps need to be performed on the R/3 side. Please check service.sap.com/securityguide for this or do a search on the SDM forums on "sap logon tickets". There also are various nice weblogs on this, e.g. Quick Guide for setting up SSO between EP and R/3
Now for the "data fetching" part. This will require doing an RFC call from EP to your R/3 system. For this, you usually utilize SPA Java Connector (JCo) through JCA. This archive https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/jca on ep6 building portal applications.zip
contains all neccessary information.
Hope this helps, if so please do not forget rewarding points.
Regards,
Dominik

Problem: Socket connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time

Problem: Socket
connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time
Environment: -
OS:
Windows XP SP2/7
Code:
VC 6.0
Dll: MFC
Problem Description: -
We have written a utility program which create socket (Using windows standard method [MFC]), and then make connection with another service (List Display) running
on port 3334 in different machine and retrieve the required list data. This program was working fine in almost all the machines.
But, we have received a severe intermittent issue on two machines. Client is facing issue in displaying the list data from port 3334.
Attempt: -
First we tried to debug code, and we come to know that socket is not creating in utility program. So we tried to telnet on ListDisplay service port 3334 and we were surprised that we were able to telnet, then we opened some more
telnet window on same port 3334 around (6 to 8) window, and each cmd connected properly. But we were not able to create socket from utility program.
Problem is severe because issue is intermittent.
We have tried all the way, but we are not able to figure it out, that what can be the exact problem and what are the conditions, when utility program will not
connect with ListDisplay service on port 3334.
Kindly assist to resolve this issue. For any help, we would be really thankful.

Hi,
According to your description, it seems that you have created an utility program which is making connection with another service port 3334, however, two clients are facing issue in display the data list from port 3334.
Port: 3334/TCP
3334/TCP - Known port assignments (1 record found)
Service
Details
Source
directv-web
Direct TV Webcasting
IANA
Since the port 3334 is used by directv-web service, I'd like to suggest check this service it is working well on the problematic clients.
1. The client can be resolved in DNS well? Please run "nslookup" in the prompt command.
2. Is there any 3rd party application interrupting? Do test in clean boot.
2. Strongly suggest you run process monitor tool to analysis it.
I am looking forward to your reply if you have any updated on your side.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Drill Down Report in SAP B1 through Crystal Reports

Hi Gurus,
Is it possible to make a reports through Crystal Reports in SAP B1 ....
Please help or give some examples if you can ....
Thanx SK

Hi,
You can enable Drill Down function by right clicking Section Name and choose
Drilldown OK.
Refer to the link for the complete details.
http://crystal-reports.blogs.webucator.com/2010/05/28/crystal-reports-drill-down/
Thanks.
Clint

Portal application connecting backend SAP R/3 system

Hi All,
 I am developing one portal application through NWDS. It's JSPDYNPage component.The applications functionality is basicaly is to connect it to backend SAP R/3 system & fetch some data in aparticular table & display that data in a tableview format on one JSP& also when i click any row of the tableview then details of that row should get displayed on the next JSP. So i reached till develpoing a code that connnects to Backend SAP R/3.(Basicaly coding of connection part is done). Now i need to test this code, to check whether it is fine or not? NWDS doesnt give nay error, not compile also or not runtime error also. It simply shows the output as a blank page, where it is supposed to display one line of text in textview(i coded this in my JSP).But as i said it displays a blank page. i tried to debug the application , but debugging also not worked.I performed the debugging twice in right way. The code was not debugged, it run the same way as it normally runs when debugging is off & shown the blank page. I also have done all the the settings or prerequisites for debugging properly. I am stuck at this point now.search many documents , but no relevant help has been received. Can anyonehlep me with this. i am putting below the code for JSP, JSPDYNPAGE component as well as portalapp.xml. Can anyone guide me with this, whhere i am making mistake? what should i change in this?
JSPDYNPAGE code
package com.lti.portal;
//import java.util.ArrayList;
import com.sapportals.htmlb.*;
import com.sapportals.htmlb.enum.*;
import com.sapportals.htmlb.event.*;
import com.sapportals.htmlb.page.*;
import com.sapportals.portal.htmlb.page.*;
import com.sapportals.portal.prt.component.*;
import java.util.ArrayList;
import com.sap.mw.jco.IFunctionTemplate;
import com.sap.mw.jco.JCO;
import com.sun.corba.se.internal.core.Response;
public class Connection_R3 extends PageProcessorComponent {
public DynPage getPage(){
return new Connection_R3DynPage();
public static class Connection_R3DynPage extends JSPDynPage{
private Conn_R3 myBean = null;
public JCO.Client mConnection;
public JCO.Repository mRepository;
public ArrayList al = new ArrayList();
public String output;
public String Ans;
public static String BEAN_KEY="myBean";
public void doInitialization(){
IPortalComponentRequest request =(IPortalComponentRequest) this.getRequest();
IPortalComponentContext context = request.getComponentContext();
IPortalComponentProfile profile = context.getProfile();
//create & initialize the bean.
Conn_R3 test_bean= new Conn_R3();
test_bean.setans("3");
// put the bean into application context.
context.putValue(BEAN_KEY,test_bean);
conn();
//IPortalComponentResponse res = (IPortalComponentResponse)this.getResponse();
//for(int i=0;i<al.size();i++)
//res.write(" "+al.get(i).toString());
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
this.setJspName("Connection_R3.jsp");
public ArrayList conn() {
IPortalComponentRequest request =(IPortalComponentRequest) this.getRequest();
IPortalComponentContext context = request.getComponentContext();
IPortalComponentProfile profile = context.getProfile();
Conn_R3 sample_bean = new Conn_R3();
sample_bean.setans("5");
//context.putValue(BEAN_KEY, sample_bean);
//r3-accessing
//connect_to_r3();
try {
// Change the logon information to your own system/user
mConnection = JCO.createClient("800", // SAP client
"********", // userid
"******", // password
null, // language
"*******", // application server host name
"**"); // system number
mConnection.connect();
//System.out.println(mConnection.getAttributes());
mRepository = new JCO.Repository("ABC", mConnection);
} catch (Exception ex) {
ex.printStackTrace();
System.exit(1);
JCO.Function function = null;
JCO.Table codes = null;
try {
function = this.createFunction("ZSAMPLE");
if (function == null) {
System.out.println("ZSAMPLE" + " not found in SAP.");
System.exit(1);
String num1 = "7";
String num2 = "9";
//String ans;
function.getImportParameterList().setValue(num1,"My_import");
function.getImportParameterList().setValue(num2, "My_Import");
mConnection.execute(function);
Object name =function.getExportParameterList().getValue(Ans);
output=name.toString();
sample_bean.setans(output);
//sample_bean.setans(output)
//al.add(name);
//store values into strings
//pushing of values we get from r3 into awt
} catch (Exception ex) {
ex.printStackTrace();
System.exit(1);
disconnect_r3();
return al;
public void connect_to_r3() {
public JCO.Function createFunction(String name) throws Exception {
try {
IFunctionTemplate ft =
mRepository.getFunctionTemplate(name.toUpperCase());
if (ft == null)
return null;
return ft.getFunction();
} catch (Exception ex) {
throw new Exception("Problem retrieving JCO.Function object.");
public void disconnect_r3() {
mConnection.disconnect();
//**********************Code for BEAN****************************
package com.lti.portal;
import java.io.Serializable;
public class Conn_R3 implements Serializable {
public String answer;
public void setans(String a)
answer=a;
public String getans()
return answer;
///////////////////////Code for JSP*****************************
><%@ taglib uri= "tagLib" prefix= "hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.lti.portal.Conn_R3" />
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
<hbj:form id="myFormId" >
<hbj:textView
id="Welcome_message"
text="<%=myBean.getans()%>"
design="STANDARD" >
</hbj:textView>
</hbj:form>
</hbj:page>
</hbj:content>
/////////////////////////////////Portalapp.xml*****************************************
application>
<application-config>
 <property name="PrivateSharingReference" value="com.sap.portal.htmlb"/>
</application-config>
<components>
 <component name="Address_comp">
 <component-config>
 <property name="ClassName" value="com.lti.portal.Address_comp"/>
 </component-config>
 <component-profile>
 <property name="tagLib" value="/SERVICE/htmlb/taglib/htmlb.tld"/>
 </component-profile>
 </component>
</components>
<services/>
</application>

Hi,
 Do onething, please refer this <a href="http://www.i-barile.it/SDN/JCoTutorial.pdf">JCo Tutorial</a> as well as <a href="http://www.apentia-forum.de/viewtopic.php?t=1962&sid=9ac1506bdb153c14edaf891300bfde25">Link</a> also.
Regards,
Venkatesh. K
/* Points are Welcome */

Error " Could not connect to SAP R/3 system"

HI:
We have been having some problems with our portal lately and most recently the error that we get is "Could not Connect to SAP R/3 "
The system landscape settings have not been changed.
Thanks for your responses.
Rachel

When I log into the portal and launch the MSS iviews I get the error ( Could not Connect to SAP R/3).
Similarly when I launch ESS I get the following error:
I see that it is lost connection with our SAP R/3 HR system. And system parameters that are available now
are just SAP BW, SEM and CRM..
So looks like we need to re-establish the connection..(?)
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
System 'pcd:portal_content/wwy.KeyStone/com.nrx.pct.vip.systems.sapr3' alias 'SAP_R3_HumanResources' not found. Please check the system object and the alias..
See the details for the exception ID in the log file
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
Parameter Dump
ApplicationParameter
ClassName com.sapportals.portal.appintegrator.layer.SingleSignOnLayer
CodeLink com.sap.portal.appintegrator.sap.bwc.IAC
DebugMode false
DebugMode.default false
DebugMode.type select[false,true]
ExportParameters Authentication, LogonUser, RequestMethod
ForcedRequestLanguage
IAC PP_MY_Profilematchup
MandatoryParameters System, IAC
NavPathUpdate false
NextLayer IAC/ConnectionLayer
OptionalParameters ApplicationParameter, DebugMode
SSO2Template
System SAP_R3_HumanResources
System.type lookup:com.sapportals.portal.appintegrator.lookup.SystemLookup
TopLayer IAC/SSOLayer
UserMappingTemplate login=<MappedUser>&password=<MappedPassword>&~mysapcomusesso2cookie=0
Wizard.MandatoryParameters System, IAC
Wizard.OptionalParameters ApplicationParameter
X509Template
buildTree false
com.sap.portal.reserved.iview.IsolationMode URL
com.sap.portal.reserved.iview.WizardURL pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultIViewWizard
com.sap.portal.appintegrator.sap.IAC::IAC/SSOLayer
MandatoryParameters
System SAP_BW SAP_BW_Q22 SAP_BW_SAND SAP_CRM SAP_CRM_SAND SAP_SEM
Internet Application Component (IAC)
OptionalParameters
Application Parameters
DebugMode No Yes

Problem when connect to SAP

Hi All!
When i create an Addon Application I Register String to connect to SAp by: Right click in my app/properties/Debug/ and input command line Agruments.
And in myclasses I call:
Private Sub SetApplication()
        '// Use an SboGuiApi object to establish the connection
        '// with the application and rturn an initialized appliction object
        Dim SboGuiApi As SAPbouiCOM.SboGuiApi
        Dim sConnectionString As String
        SboGuiApi = New SAPbouiCOM.SboGuiApi
        '// by following the steps specified above, the following
        '// statment should be suficient for either development or run mode
        sConnectionString = Environment.GetCommandLineArgs.GetValue(1)
        '// connect to a running SBO Application
        Try ' If there's no active application the connection will fail
            SboGuiApi.Connect(sConnectionString)
        Catch ' Connection failed
            System.Windows.Forms.MessageBox.Show("No SAP Business One Application was found")
            End
        End Try
        '// get an initialized application object
        SBO_Application = SboGuiApi.GetApplication()
    End Sub
to connect to SAP.
But When i create many classes I call many this function so my application will timeout when I setup this Application for SAp. How to connect one time and using all.
please help me solve this problem.
Thanks

Hi,
1) Define a main class, which calls SetApplication and initializes SBO_Application.
Public class clsSBO
Public WithEvents SBO_Appln As SAPbouiCOM.Application
Public sub New()
    SetApplication()
    CreateObjects()
end sub
your functions
end class
2) Create objects of all of your classes in the clsSBO.
3) Whenever ItemEvent or MenuEvent happens, pass the event to the appropriate objects.
Hope this helps.
Please give points if you find this useful.
Regards
Geetha

Connection from SAP 4.0B System to IBM MQ Series

Hi
is it possible to connect SAP 4.0B System with IBM MQ Series 6.0,is the connection supported by SAP 4.0B?
If supported I am confused with what is the RFC Destination to be used
is it R/3 Connections or TCP/IP connections
Thanks in advance
Warm regards
Rajasekhar

Hi Anup
Thanku for your valuable input, here in the TCP/IP connections can you please suggest what are the
ACTIVATION TYPE to be used there are 4 radio buttons, is it the
Registered Server Program OR
Start On Application serverOR
Start on Explicit Host OR
Start on Front End Work Station
if it is the registered server program what are the values to be used for PROGRAM ID
is it required to make any changes in SAPRFC INI File
Thanks in advance
Warm regards
Rajasekhar

How to check connection from SAP to reservation system?

Dear Experts,
May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
Thanks.

Hi
You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
For more information, see Technical Prerequisites for Travel Planning--
Technical Prerequisites for Travel Planning
Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
Connection to an External Reservation System
The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
u2022 Availability query of travel services
u2022 Transfer of additional information about selected travel services
u2022 Price information
u2022 Processing of reservation by the respective provider
u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
In order to carry out online booking via AMADEUS the following must have been carried out:
u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
u2022 A network connection to the AMADEUS computer center must have been opened
u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
For questions about registration, contact the SAP & AMADEUS Competence Center:
SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
Cheers
Mukta

Error while connecting backend SAP 4.7 system to GRC 5.3 system

Hi Experts,
I am Facing an Connection Issue while connecting back end SAP 4.7 system to GRC 5.3 system
Please help me out with Screen screen shots and process to be followed while connecting both system,
Thanks in Advance,
Ram

Hi Daya,
you really REALLY want to visit this page and watch & read for a few days before you do anything in the system.
http://wiki.sdn.sap.com/wiki/display/BPX/Governance%2CRisk%2CandCompliance%28GRC%29How-ToGuides
You can easily break stuff in a way that's hard to fix, so I suggest you take your time.
Frank.

Problem in connecting to sap

Hi,
Am not able to connect to sap. while opening connection i get the error. Gateway is open and sap router is up and running.
please find the trace file extract :
ERROR file opened at 20110428 111949 India Standard Time, SAP-REL 710,0,155 RFC-VER 3 1068578 MT-SL
T:4680 Error in program 'SAPServiceConnector': ======> SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM DEST=o01, GWHOST=/H/*******/S/3299/H/194.39.131.34/S/3299/H/oss001.wdf.sap-ag.de/S/3301, GWSERV=sapgw01, SYSNR=01
LOCATION    SAProuter 37.15 on ***** (for security, i have put * instead of router)
ERROR       sap-dev: route permission denied (********** to
            194.39.131.34, 3299)
TIME        Thu Apr 28 11:19:43 201
RELEASE     640
COMPONENT   NI (network interface)
VERSION     37
RC          -94
COUNTER     19827
Waiting for your valuale suggestions..
Reards,
Sri
Edited by: Srihari Rao on Apr 28, 2011 11:38 AM

Hi,
ERROR sap-dev: route permission denied (********** to
The saprouter does not allow to connect to this IP / System.
This has to be changed on the saprouttab, please ask your Basis Team to do so.
Could it be the system you connect form is pretty new? Then it migth just miss there.
Or perhaps you have the wrong SAPROUTERSTRING (mainly Port) ?
kind regards
Peter

SAP BI upgrade causes Bw Crystal Reports to hang or timeout

We recently upgraded or patched our SAP BI to Service Pack 8 from service pack 4. In doing so my SAP BW Crystal Reports have stopped working correctly. It is only reports that are using a BW query that is the product of 3 multiproviders being joined together. They ran in less that 1 minute before the upgrade and are now timing out. If I try to run them in Business Objects they fail after running for an hour with a database connection error.
Has anyone experienced this same problem?

Hi Tina,
Sorry, CR and BOE does not have a Service Pack 8 so what I meant was you are likely in the wrong forum.
Try this link and look for something that looks familiar for which ever product you are using:
http://forums.sdn.sap.com/index.jspa?categoryID=1#45
Don

Problems in using the driver coming with application in Crystal Report

Post Author: StrongWare
CA Forum: Data Connectivity and SQL
Hi! All,
I used the ADORecordSet to fetch data from tables, and pass it to ther report at runtime using AddADOCommand.
I got the ActiveConnection and ActiveCommand from ADORecordSet and passed them as parameters of AddADOCommand, it seems the AddADOCommand opens an addional connection, which can be told from the ODBC trace, instead of using the ActiveConnection I passed in.
Is that true?
It causes the big problem for me, since the ActiveConnection I passed in was opened using our OEM DataDirect driver and I assumed the AddAdoCommand uses it directly, but it is not the case!! The AddADOCommand just uses the connection information from ActiveConnection and opens an additional one. Since the connection string contains the driver name, so this connection is also opened via our OEM DataDirect Driver. But the Crystal Report tries to unlock it using its own license/password {qecr.lic,brahmabrahmabrahmabrahma} to unlock our OEM driver, which of course raises the license warning from DataDirect Driver 5.2!! After a certain grace period, any sql operations under the cover of AddADOCommand fail and thus causing the failure of AddADOCommand.
Now what is the solution?
1. how to avoid open an additional connection? or any other API I should call to avoid this?
2. How Crystal Report works with the driver coming with the application, and this driver needs to be unlocked before being used.
Thanks
Strong

I don't have the any driver's source code (such as ividcpwr.dll source code), how can I modify the specific driver through labwindows.
Follow your advice I use I/O trace to get trace as follows:
1 IviDCPwr_InitWithOptions ("ke2303", VI_FALSE, VI_TRUE, "", 0x0C913064) VI_SUCCESS 14:45:10.675
2 IviDCPwr_ConfigureVoltageLevel (ke2303, "CHANNEL1", 3.8) VI_SUCCESS 14:45:11.405
3 IviDCPwr_ConfigureCurrentLimit (ke2303, "CHANNEL1", 0, 3) VI_SUCCESS 14:45:12.104
4 IviDCPwr_ConfigureOutputEnabled (ke2303, "CHANNEL1", VI_TRUE) VI_SUCCESS 14:45:12.824
5 IviDCPwr_Measure (ke2303, "CHANNEL1", 1, 0) VI_ERROR_TMO 14:45:16.207
6 IviDCPwr_GetError (ke2303, -1073807339, 0, "") 0x00000037 14:45:32.991
7 IviDCPwr_GetError (ke2303, -1073807339, 55, "Primary Error: ..................") VI_SUCCESS 14:45:32.991
8 IviDCPwr_close (ke2303) VI_SUCCESS 14:45:33.847
I cannot see any GPIB command in the trace but some IviDCPwr functions.
Besides, if I know any bug (eg. some wrong GPIB command) in ividcpwr.dll, how can I modify it before I get it's source code.
Pls teach me anytime in your conveneince.
thanks!

Problem in connecting to Sap R/3 system through Crystal Reports

Similar Messages

Maybe you are looking for