Problem in Copy Paste

I have developed a RTF Text Editor using the RTFEditorKit provided by Java. The problem is that when I format a given text eg. I set the size of the text 11 and make it BOLD and Italic and Font color red - and then try and paste the text is loses its formatting.
I tried overriding the copy paste functionality of RTFEditorKit to use the clip board for copy paste but that too didnt work. Can any one advice as to what could be the solution for the same ?

Hi
I am Ashish, i am also facing similar problem in developing my RTF Editor.
Paste in RTF kit doesent provide any support for pasting Formatted text
Have u got any sucess in same
Kindly help me too..
Thanks
ashish

Similar Messages

Does iOS8.1.1 resolve problems with copy&past?

since previous releases of iOS8 I'm facing problems with copy&paste of url's and data betwen application on iPad2 and 4s .
does 8.1.1 solve those problems.

Paulus_2 wrote:
does 8.1.1 solve those problems.
There re are some who have reported it has, and then there are others who have reported it hasn't.
You might want to follow this methodology to update ...
Follow this procedure for a Troubleshooting Methodology ... basically reset to factory default condition -BUT- be sure to do the following methodically and also to follow the part with Apple Support!
First you want to make sure you have several backups of your data and done with a couple of "different" sources. Be sure to understand what data is backed up and what is NOT on iCloud Backup and iTunes Backup. Use a variety of methods for backup ... you might check into Dropbox, in addition to your Apple options.
Then turn off your desktop anti-virus software when using iTunes for this reset to factory default. After you do that reset, then leave your iPad in its factory default state and see how it operates then. If you encounter any problems in that factory default state, then take it to Apple Support, and let them know that you have just reset it to that state with iTunes and have not put any of your data back on and it is operating in this fashion (whatever the problem is) in that pristine state. Make sure you keep that trouble ticket number, because if it has to be escalated through Apple Support, you're going to find all communications tied in with that number. If the lower level help isn't able to help you, then escalate it to a higher level to examine the problem. Keep at it with that trouble ticket number until Apple Support arrives at a solution to that problem. Be methodical and keep at it.
On the other hand, if everything is okay with the factory default condition, then restore your backup. Some people have discovered that the problem resides in the apps or something in the restored backup. If that's the case, then it's going to be trying and difficult to find out which developer's app is causing you the problem. And ... it's true ... that a developer not following Apple's instructions and guidelines for his app can CAUSE YOU TROUBLE. This kind of thing does happen from developers, especially when a new system upgrade comes out, because some developers ignore what Apple tells them about changes coming, and what they do BREAKS SOMETHING.
This is a troubleshooting methodology that you are going through. See it through to the end.
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414

A problem with copy/paste from extract panel in Dreamweaver 2014.1.1

I have a problem with copy/paste from extract panel in Dreamweaver 2014.1.1 :
Russian letters pasting in dreamweaver html in such way: ffd0 ff9e ffd0 ff9a ffd0 ff9e ffd0 ff9c ffd0 ff9f ffd0 ff90 ffd0 ff9d ffd0 ff98 ffd0 ff98
Can you help? What could it be?

Hi,
I test the issue with my colleague and didn't find the same issue.
Here is the screenshot:
So please check if Lync Server 2013 and all the issued Lync 2013 client update to the latest version firstly, it not update to the latest version, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Problems doing copy/paste from Flash to Illustrator

This is a problem I've had since Flash 8: when doing a
copy/paste from Flash to Illustrator (on Windows), there's extreme
degradation of the artwork, sometimes to the extent that no actual
art is even copied. All the curves seem to be approximated with
straight line segments, but at some point it just seems to give up
even trying, leaving an unidentifiable blob for most of the object.
As I said, sometimes it doesn't even copy anything at all -- all
that shows up after pasting into Illustrator is an empty group.
The weird thing is that this process worked fine in Flash MX
2004. What could possibly have changed? I was sure with CS3 it
would be fixed, but it wasn't. I haven't tried Illustrator CS4 yet,
but copying from Flash CS4 to Illustrator CS3 produces the same
problem.
I've seen a few other reports of this problem in other
forums, but I've encountered it on every install of Flash and
Illustrator I've tried (admittedly, all Windows machines, but three
or four different ones, both XP or Vista). Can anyone here confirm
that this problem exists or doesn't exist on their computer? To
test it, create a piece of art with plenty of curves and several
colors in Flash, then copy and paste it into an illustrator
document.
If this problem is as widespread as my experience seems to
indicate it is, why hasn't it been fixed in two major revisions of
the software? Is Adobe even aware of it? If not, how can I let them
know? I'm getting majorly sick of having to deal with it.
Illustrator used to be a much larger part of my animation process,
but now I can't use it how I really want to because of the bad copy
and paste functionality.
-David

Hi,
The integration between Flash CS3 and Illustrator means you
can copy objects from Illustrator to Flash and i think if you copy
from Flash to illustrator or Photoshop, you would not get a good
results.
You can solve your problem by exporting your Flash work as
.AI.
Your idea about the ability to copy from Flash to Illustrator
is a good idea although Illustrator can not read some of the Flash
imported information correctly. But it is still a good enahcement
idea. There is a link where you can add suggestions but I do not
remember it and I am replying using mobile, so my browsing
capabilities is limited.
I will try to post the link here when I got to my back normal
connection
Thanks alot!!

Problems to copy paste and drag

Hi,
I have some troubles to copy paste in the finder, mail, iphoto using the keybord or mouse. I can copy but not paste.
And I can't drag files from one place to another in the Finder, same for e-mails in Mail and photos in IPhoto. I don't think it's the mouse because it is working when I drag tabs to reorder them in Safari.
Anyone knows how to solve this problem? It is very frustrating, especially when you try to tidy your desktop and you can't move files, or when you try to capy paste a website adress from one e-mail to another or to safari.
Thanks for your help!

A similar discussion:
http://discussions.apple.com/thread.jspa?messageID=5773819
There's a solution identified there.
Reboot holding down the Shift Key (you'll hear a little series of tones)
Utilities->Disk Utility
Repair Permissions on your system HD
Reboot.
You NEED to do the Shift-Key reboot - just doing repair permissions didn't work for me.

Mail: Problem with copy&paste from Remote Session

Hi,
I have a problem to copy just text from remote session (MS RDP Client) directly into an email. It always shows a contact .
The workaround is to paste into any other app, it doesn't matter which one. It works with Outlook for Mac but not with Mail. Does someone have the same issue and maybe a solution?
Due to connection issues I cannot use Outlook outside the company... so not an alternative at the moment.
Thanks

Hi,
I test the issue with my colleague and didn't find the same issue.
Here is the screenshot:
So please check if Lync Server 2013 and all the issued Lync 2013 client update to the latest version firstly, it not update to the latest version, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Problem with copy/paste into WYSIWYG field?

In using Robo HTML X5 my helpfile design is a simple one, but
one issue is stumping me.
-From the TOC tab I will create a new topic, and then edit
the WYSIWYG field on the right, insert graphics, etc. But if I cut
and paste from Word 2003 into the WYSIWYG topic field, all
formatting like bold letting is stripped out, along with graphics.
The graphics have to be cut and pasted individually and I manually
have to reformat the text.
Does anyone know why a copy/paste into the WYSIWYG field is
being stripped of formatting somehow? Is there simple project
setting somewhere?

Hi reiver12367 and welcome to our community
Trust me on this. Mixing Word and RoboHelp HTML are like
mixing oil and water. You really don't want to go down any road
where formatting is maintained during a copy/paste operation.
You might see better results by right clicking the folder
(inside RoboHelp HTML) where you want the topic to be, then
selecting Import. From there, choose the Word document file type
from the drop-down on the bottom of the dialog, navigate to and
choose your Word document. You will have a couple of dialogs to
deal with and the stuff should import in.
Personally, I even avoid going that route if I can. I instead
opt for saving the Word document as pure ASCII text. Then creating
a new topic and copy/pasting the text into the topic. From there I
format as needed.
Hopefully this helps... Rick

Hey there is there anyone that have problems whit Copy/paste, after downloading the new version off Facebook

i can copy/paste on facebook after the opgarding ios5 on my phone..
can anybody help me whit that ?

Sorry to be so late in replying to you but thanks for answering my question but Where do I go for the I-POD TOUCH FORUM? totally new to this game.

Space problems when copy/paste clip

Import of an DV-Pal digitalized 59 min S8-film from a DV-cassette by Magic iMovie filled 11,77 GB of HD space. That's o.k.. But when trying to create a new iMovie project using copy and paste by already 6 clips of this film, together lasting ca 1:28 min, new project's need of HD-space exploded to more than 33 GB. The menu diplay for format choice only shows DV, no differentiation between PAL and NTSC. The new clipframes however indicate DV-Pal. I deleted iMovie preferences and reinstalled the program, but without a positiv result.

what catspaw (greetings to NZ, hi Bruce!!) told you is:
when you import 60min as one solid clip,
and when you now choose a 1min portion of that clip
and when you copy/paste that into another project. ..
=> iM doesn't move only a 1/60th of the original, but the full ~13GBs.. !!
the idea behind this is, that you are allowed to 'modify' that shorter clip in the other project.. e.g. you can 'lengthen' it with the trimmers..
you have two options:
forget copy/paste, but Export/Full Quality your selections only.. due to dv, this is a lossless workflow, you don't lose any quality..
or, on import:
tell iM in its prefs, to 'chop' imports automatically into smaller chunks, e.g. 5min.
it doesn't matter on editing or playback, if oyu have a solid clip or many single clips..
copy/Pasting now a selection results in a much smaller 'background' file..
hope, I could explain...

Is there a problem with copy paste using Ctrl+insert and Shift+insert

This is a swing application.
initially i was using java 1.3 and the copy paste using Ctrl+insert and Shift+insert was working
then i migrated the same to java 1.5 and this functionality got messed up.

Include the following in your initialization code, before you create any components:     InputMap im = (InputMap)UIDefaults.get("TextField.focusInputMap");
    im.put(KeyStroke.getKeyStroke("control INSERT"), DefaultEditorKit.copyAction);
    im.put(KeyStroke.getKeyStroke("shift INSERT"), DefaultEditorKit.pasteAction);
    im.put(KeyStroke.getKeyStroke("shift DELETE"), DefaultEditorKit.cutAction); You'll need to add the appropriate imports, too: import javax.swing.InputMap;
import javax.swing.KeyStroke;
import javax.swing.UIDefaults;
import javax.swing.text.DefaultEditorKit; It seems they accidentally removed those bindings from JTextField under MetalLookAndFeel in JDK 1.5. They've been restored in JDK 1.6.

Vector problem after copy/paste from Excel

In the past I've been able to drag or copy and paste an image from excel into Illustrator. I've lost that ability (sometimes I'll get a shadow image copied in, but it is not in vectors and it is not editable). If I save the figure as a PDF to copy it into Illustrator as a vector formatted object I cannot figure out how to change any formatting/colors. I can select individual bars in a bar graph, I can add an outline to them, but the option for changing the color is completely absent. I am fairly new to this, but would love help. I've tried releasing the clipping masks, but that only fills in the entire body of the chart with color. This literally all worked fine yesterday (and I can modify prior charts that I already imported with no problem). I'd love some help and feedback as I am fairly new to this and could be missing something! Thanks.

I can't get a PDF picture, ai picture, or EPS figure to post on here so I don't know how useful an image will be, but I added a jpeg that shows the shadowing I get when I copy in at times. .

Lync 2013 and problem with copy/paste from SQL Mgmt Studio.

Hi Everyone,
Recently one of ours programmers noticed a very interesting issue which is a real pain in the a## for him and his colleagues. It was all fine with Lync client 2010, problem started when moved some people to 2013 client.
When someone sends him a message with SQL Code, and he is pasting it into SQL mgmt std. he gets dashes "-" instead of spaces " ".
I thought this is a local PC issue, but:
1. On 2010 it worked, stopped all of a sudden when they changed lync client to 2013
2. They are pasting code on the SERVER not local SQL mgmt std. on their client machines
3. Even if I send him a code from Lync 2010 and he is pasting that from his 2013 client - he gets "-" dashes, so I guess it is not important from where I send the message, but from where he is copying it.
As for now, I have noticed that problem with guys from England and region of APAC - they have lync 2013 client already.
Really appreciate any help as I donot have any point where to start troubleshooting...
Cheers guys,

Hi,
I test the issue with my colleague and didn't find the same issue.
Here is the screenshot:
So please check if Lync Server 2013 and all the issued Lync 2013 client update to the latest version firstly, it not update to the latest version, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Itunes 10.5. problems with copy paste in lists

All,
I'm a DJ and every night I have an own list in itunes.
When I want to use some songs in one list in another list I simply pressed cmd+c, clicked in the other list and pressed cmd+v
That does not work anymore.
Sometimes cmd+c is grey and if not and I paste it flackers but I cannot find the song.
Others have the same experience?!?
Just experienced that if I copy from the contect Menu and then do the paste via the keypad it works.
Copy in the menu from itunes is grey?!?
Thanks for any help
Cheers
Don Xello

WhatMeWorry? wrote:
The problem is that when I do this I wind up with the cells somehow being linked. Thus if I copy the text from cell #2 and paste it into cell #7 everything works fine. But if I later delete the text in cell #7 the text in cell #2 is also deleted. Worse yet, if I copy text from page 1 cell 4 into page 3 cell 6 I wind up not only somehow linking the cells to one another but also the page number.
I'm really surprised because I never got this kind of behavior.
May you send me a sample file with this odd behavior?
Click my blue name to get my address.
If the file is too big for an attachment (zip it), you may use the FREE YouSendIt.
http://www.yousendit.com/
Yvan KOENIG (from FRANCE dimanche 8 mars 2009 19:40:54)

Copy / paste operations crash all SGD windows

Hi
From time to time, users have problems during copy/paste operations between SGD windows.
When users use this function between (for ex.) gterm and x-emacs v2.22 windows, all SGD windows crash.
The support asked them to migrate to the new SGD version (at this time 4.41) but this problem still appears.
We configured the coreadm with all options enable but it seems we don't have any generated core files.
Does anyone already got this problem ?
Thank's for your answers !
Edited by: furtherup on Mar 26, 2009 12:47 AM

I'm having the same problem. I don't use ZoneAlarm or Avira.
I just use the built-in Windows Defender in Windows 8.
My problem started in v22 and I still have it in v23.
I've tried all the suggestions posted at various websites, but I still can't copy and paste in Firefox.
Any ideas?

Copy/paste errors after updating Acrobat Professional to 8.1.3

Hi,
I as well as my colleague has recently experienced problems with copying/pasting comments in and between pdf-documents. It seems to me that the problems appeared after updating to 8.1.3. Very frustrating because we are using Acrobat intensively in our roof reading process.
I found one other thread mentioning this but there is no solution.
Lars Lindbjerg

Sorry to hear about the trouble. We've heard some reports of similar issues with files not opening after the 11.0.01/10.1.5/9.5.3 updates were installed. I would suggest uninstalling Acrobat, the reinstalling and patching up to 10.1.4 again as an immediate solution.
To help us figure out what may be going with your particular files, could you open one in Acrobat and choose File > Properties. I'd like to know what it says next to the PDFProducer and Application lines.
-David

Problem in Copy Paste

Similar Messages

Maybe you are looking for