Problem in copy version

Dear All,
i am facing a problem in copying planning version. I am selecting few products for which i need to copy data from 000 to version "A".
i have selected "copy master and transaction data" and given few products names as input parameter.
while copying, system copies all the master data of 000 version and transaction data of selected products.
Is this the standard behavior? I want to copy master and and transaction data of selected product only.
Regards,
Nitesh

Nitesh,
The selection fields that you get under 'Restrict Orders using Location Product' refer to the copying of order data & stock. It will be applicable to the order category you specify under the 'Also copy order data & stock' check box.
The master data will be copied for all. Is this a problem for you? It should not do any harm if your master data is available in additional versions. It is only when the orders are created in additional versions does it affect system performance due to LC memory consumption.
regards,
Srinidhi

Similar Messages

Px4-300d copy job setup problem. Firmware version 4.1.108.32627

Hello.
I have a wierd problem with copy job setup on my px4-300d (4.1.108.32627) . I was able to set up one job, where I take a folder from my NAS and put it to a remote machine. That job ran fine.
When I go to setup a similar job but for a different folder, I have two possible outcomes:
1. When I go to chose the remote folder I see it fine and the job is setup fine as well. However when I run the job it throws an error. And in the log I see that instead of going to the folder I setup like "\\remoteserver\backupfolder" it's going to "\\remoteserver\u_myremoteserverusername\backupfolder" , which is obviously not there.
2. I can see my remote server, but I don't see my shares on it. I don't get no "Access denied" error or anything - I simply don't see any shares on that particular server. I do see shares on other servers, which use the same credentials. In addition the job that I was able to set up previously stops working.
Then when I reboot, the first job (the one setup successfully) may or may not properly run, yet I still cannot set up the second job.
I did check permissions and all the stuff that you would regularly check (connectivity, ports etc). Seems to me the script that is being generated from the UI is a bit too smart and is in fact outsmarting the NAs itself.
I also suspect that the fact that I could set up the first job and not the second is that the second job goes to a subfolder of a shared folder. Or that the shared folder's name starts with an underscore "_" . But these are just my guesses - I cannot verify this yet.
Any ideas how to fix this or how to bypass the problem?
Thanks.

Hello fimine
I recommend double checking that the remote server's folders that are not being seen by the px4 are infact shared from that remote machine. If they are not, copy jobs will have problems accessing the folders.
I also recommend trying to use the remote machine's ip address for now to see if there is any change in behavior.
If the issue does not happen when using the ip address, it my be an issue with how your network's DNS is setup.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Problems during copying music files from iTunes 10.6.1 to iPhone

1st problem
In new iTunes 10.6.1 on my MBP when copying music on iPhone if during copying add additional musical files in queue, copying of files from the previous queue stops. In the previous iTunes version of such problem didn't arise. Whether there is a solution of this problem?
2nd problem
In older version of iTunes i could adding new music files to my iphone with drag and drop from Finder. Now i must add files in iTunes library and then from library drag and drop files to iphone. How to solve this problem?

You would have to purchase 10.6 (Snow Leopard) and install it, assuming your computer is compatible.

Problem on copy with hp printer m127

hi
sorry! my english is not good
i have a printer hp m127 and i have problem on copy with this printer
when i copy a A4 paper from feeder or glass don't print about 1 inch of botton of page but when i scan this page, it's correct and when i print scaned document, it's correct too
I do'nt know why this problem exists
thanks alot
This question was solved.
View Solution.

Hi @hamidjoon , and welcome to the HP Forums!
I see you are having copy issues. I'd like to help!
Before we get started, I need a little info:
I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Problem with copying files between OS 9 to OS 10.4.9

We have updated 2 computers to 10.4.9 after som minor problems its working fine the only problem we still have is that we cannot copy files from our older Mac running OS 9.2.2 to the macs running 10.4.9 if we copy 1 file its working when we want to copy a folder or more files the connection got lost we get a message the connection with the file server unexpectedly broken. We also have a Xserve running OS 10.4.6 coping files to the Xserve is not a problem and is running just fine.
We can copy files or take files from the OS 10.4.9 macs to the Mac with OS 9.2.2 this is no problem just copying a bit slower then to the Xserve.
All the computers are in a netwerk with cat5 cables and was working just fine before the updates to 10.4.9
Regards Pepijn

Welcome to Apple Discussions!
Copying from 9 to 10.4.9 is not recommended unless Mac OS X is under control of the copying. Mac OS 9 has no familiarity with the file permissions of Mac OS X and thus if you make a mistake, you could seriously damage the permissions of Mac OS X. Others have found problems transferring from 9 to 10.4.9 where not with prior versions of Mac OS X. I say it is about time, because of the risks involved but for others their workflow depends on it they are having to relearn how to go the other direction. I've found if the risk is not taken account for, you can make Mac OS X unbootable. My suggestion is to either do all your networking and file transfer for Mac OS X from Mac OS X, or upgrade the software you have to Mac OS X native equivalent software. See my FAQ on migrating to X*:
http://www.macmaps.com/macosxnative.html
* Links to my pages may give me compensation.

TS5376 I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

Hi, so did I. It seems to be a huge problem with everyone. I opened a folder on desktop and called it target. I copied all my songs into that folder.
I uninstalled Itunes completely. Rebooted. Then I installed a fresh install.
I then dragged all the songs back to Itunes and it worked. I hope that helps.
I read an article the other day and apple is suppose to come out with some genius fix for this problem, it really seems to be global.
Good luck,

Mail: Problem with copy&paste from Remote Session

Hi,
I have a problem to copy just text from remote session (MS RDP Client) directly into an email. It always shows a contact .
The workaround is to paste into any other app, it doesn't matter which one. It works with Outlook for Mac but not with Mail. Does someone have the same issue and maybe a solution?
Due to connection issues I cannot use Outlook outside the company... so not an alternative at the moment.
Thanks

Hi,
I test the issue with my colleague and didn't find the same issue.
Here is the screenshot:
So please check if Lync Server 2013 and all the issued Lync 2013 client update to the latest version firstly, it not update to the latest version, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I have to open Task Manager to quit the Firefox process almost every time b4 it will shut down I just uninstalled & downloaded another copy/version & will reinstall again. Thought you would want to know. I am anjulz on comcast

I have to open Task Manager & quit the Firefox process manually b4 it will stop. When I did it the last time b4 I just uninstalled my memory usage was up to like over 300,000 with only 1 tab open. Just downloaded another copy/version & will reinstall. Hopefully this will stop the problem. thought you would want to know this.

The proper way to close Firefox is through the File menu "Exit" or the equivalent with the Firefox button.
More detail in item '''#38 Firefox already running '''
of
[http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 look like 3.6) (#fx4interface)]
Firefox already running, to properly shutdown Firefox when closing the last window use File → Exit/Quit (or Firefox button → Exit). Closing Firefox with the [X] in the upper right corner closes the window ("Ctrl+W") but that does not necessarily close Firefox if it has subtasks running. If you want to close and reopen Firefox use the "Restart" within Add-ons if you made a change requiring a restart, or install "[https://addons.mozilla.org/firefox/addon/restartless-restart/ Restartless Restart]" ("Ctrl+Alt+R") which will allow you to take Firefox down and restart without having to check the Windows Task Manager to see if Firefox first actually ended. [http://kb.mozillazine.org/Firefox_hangs Firefox hangs]

A problem with copy/paste from extract panel in Dreamweaver 2014.1.1

I have a problem with copy/paste from extract panel in Dreamweaver 2014.1.1 :
Russian letters pasting in dreamweaver html in such way: ffd0 ff9e ffd0 ff9a ffd0 ff9e ffd0 ff9c ffd0 ff9f ffd0 ff90 ffd0 ff9d ffd0 ff98 ffd0 ff98
Can you help? What could it be?

Hi,
I test the issue with my colleague and didn't find the same issue.
Here is the screenshot:
So please check if Lync Server 2013 and all the issued Lync 2013 client update to the latest version firstly, it not update to the latest version, update it and then test again.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

Problem in copying a standard function module!

Hello there,
                 I need to copy the FM, RS_TABLE_LIST_DISPLAY, to a Y function Module. But I am not able to copy it as a single FM, I have copy all the FMs in that function group i.e. SETB.
                 I, then copied that standard function group SETB. I am getting a strange error message while activating the copied version. The error which I am getting is:
The parameter "INTTAB" of the global interface has already been defined outside the function.
INITTAB is some defined internal table.
Also the include in which this error is getting appeared is LY.....$07 something. I have tried to many times. Not able to resolve the issue.
Please help!
Regards,
Ganesh Khumse

Hi There,
              Thanks for your reply. I have not defined anything in the copied function module. I just copied and tried to activate it, error occurred.
Thanks & Regards,
Ganesh Khumse

Reader 9 - problem with pdf version 1.0 and descenders

2 big problems over here:
* Reader9 will not properly open files created as pdf version 1.0/1.x
all text is cut off about 2/3 of the way down, whether or not in fields.
* Any pdf file version above 1.0created with any version of GhostScript does not have the previous issue, However - no descenders of any font are coming out.
We do not have either problems with any version of Reader prior to 9

Hi creamac,
Welcome to communites
Please install vmware tool and then on vmware task bar select connect or unplug usb drive . You
will find that on right hand corner above to task bar of host machine .
"Nature always wears the colors of the spirit."

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

Copy Version-Budget data copied from one version to another-How to view Data in Copied Version.

Dear All,
Budget Data is copied from one Version to another Version using Tools>copy Version option. How can you view Data copied to new Version, when you receive a message Version is successfully copied.
I think we can do that by selecting appropriate version in the version dimension while accessing the Forms or in Smart View.
Can you please let me know how to do this or different options available with this process.
Thanks in Advance for your valuable time...

A form to check the data with the correct POV, a Smart View query, excel addin retrieve, financial report, export data, report script, take your pick.
Cheers
John
http://john-goodwin.blogspot.com/

Problem in copy a string to a message parameter

Hi all,
I have a problem in copy a static string into a message as its parameter.
I use the default function in creating the copy rules...
<copy xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
     <from expression="string(WS1-PSC4-KUY2)">
     </from>
     <to variable="geo_in" part="parameters" query="/ns0:GetLocationByIP/ns0:LicenseKey"/>
</copy>
as the string is a liscence key to use this web service.
However, the string is not copied to anywhere of the outgoing message.
If I use the default type 'literal' and copy to the variable parameter,
it looks like this...
<copy xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/">
     <from>
                              WS1-PSC4-KUY2
                    </from>
     <to variable="geo_in" part="parameters" query="/ns0:GetLocationByIP/ns0:LicenseKey"/>
</copy>
it gives me an error...
[bpelc] BPEL source validation failed, the errors are:
[bpelc]
[bpelc] [Error]: Element 'from' must have no character [children], because the types content type is element-only.
[bpelc] [Description]: in line 43 of "C:\eclipse\workspace\ip_locate\ip_locate.bpel", Element 'from' must have no character [children], because the types content type is element-only..
[bpelc] [Potential fix]: .
[bpelc] .
Could anybody give me a hint on what's going wrong?

This is my actual code
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.Locale;
public class TestingDate {
      * @param args
     public static void main(String[] args) {
          // TODO Auto-generated method stub
          String dateFormat="EEEE, MMM d h:mm a";
          Date test=new Date(2007,0,19, 19, 31);
          System.out.println(" original date is "+test);
          String stringResult=DateToString(test,dateFormat);
          System.out.println("Date to string is "+stringResult);
          Date dateResult=stringToDate(stringResult,dateFormat);
          System.out.println(" String to date is "+dateResult);
          String stringResult2=DateToString(dateResult,dateFormat);
          System.out.println(" Date to string is "+stringResult2);
public static String DateToString(Date test, String dateFormat) {
         String result = null;
         try {
              DateFormat myDateFormat = new SimpleDateFormat(dateFormat);
                 result = myDateFormat.format(test);
                 //System.out.println(" reslut date is "+result);
          } catch (Exception e) {
               System.out.println(" Exception is "+e);
          return result;
public static Date stringToDate(String strDate,String dateFormat1){
     Date result1=null;
     try {
          DateFormat myDateFormat = new SimpleDateFormat(dateFormat1);
          result1=myDateFormat.parse(strDate);
     catch(Exception e){
          System.out.println(" exception is "+e);
     return result1;
}I am facing problem in getting the actual date. Please suggest the solution.

Problem in copy version

Similar Messages

Maybe you are looking for