Problem in create constraints

hi..
i am attempting to create a primary constraint on one table which containts
more than 50 lacs records.when i tried to add constraints with enable novalidate,but its failed to create a constraints on the table.
we have to preserve the data which already presented in the table. there is no way to delete and change the records which is presented now.
please in what way to over come this problem.
by
ravikumar

BANNER
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Prod
PL/SQL Release 10.1.0.2.0 - Production
CORE 10.1.0.2.0 Production
TNS for 32-bit Windows: Version 10.1.0.2.0 - Production
NLSRTL Version 10.1.0.2.0 - Production
desc hp_tran_dtls
Name Null? Type
TC VARCHAR2(3)
DOC_NO VARCHAR2(15)
DOC_DT DATE
AGR_NO VARCHAR2(10)
TRAN_DTLS_SRNO NUMBER(6)
GL_CODE NOT NULL VARCHAR2(5)
SUB_CODE VARCHAR2(15)
REF_NO VARCHAR2(15)
REF_DT DATE
CHQ_NO VARCHAR2(10)
CHQ_DT DATE
ACT VARCHAR2(5)
DIV VARCHAR2(5)
EMP VARCHAR2(5)
PARTICULARS VARCHAR2(60)
DBCR CHAR(1)
AMT NOT NULL NUMBER(16,2)
TRN_TYPE CHAR(1)
LOCK_REC_FLG CHAR(1)
TMP_RECNO VARCHAR2(10)
VALUE_DT DATE
CHQ_BANK VARCHAR2(10)
BRANCH NOT NULL VARCHAR2(5)
SECTOR VARCHAR2(5)
PRODUCT VARCHAR2(5)
PORTFOLIO VARCHAR2(5)
FUTURE1 VARCHAR2(5)
FUTURE2 VARCHAR2(5)
BRANCHNM VARCHAR2(30)
REASON1 VARCHAR2(5)
TMP_REC_DT DATE
ADDL_AMT NUMBER(14,2)
TRANS_NAT VARCHAR2(5)
REC_STATUS CHAR(1)
BUSI_AREA VARCHAR2(5)
FA_TRANSFER CHAR(1)
CHQ_HNDL VARCHAR2(60)
CHQ_HNDL_TAG CHAR(1)
INS_CHECK VARCHAR2(2)
FA_POST_IND VARCHAR2(3)
FA_POST_DOC_NO VARCHAR2(10)
i have to create primary(tc,doc_no,TRAN_DTLS_SRNO)

Similar Messages

Problem when creating Database (Database, OS and hardware Configuraiton included)

Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

Problem in PK Constraints??????????????

Dear All,
i have created this table and the Tablespace is VIDI, but while creating PK Constraints the constarint is taking up the Default Tablespace APREGS. Is this a problem. Or wat is the syntax to Create constraints into a tablespace.
Below is my Script. Plz reply.
-- Create table
create table VIDI_ACCT_MATERIALS
TRANSACTION_DATE DATE,
TRANSACTION_ID CHAR(9) not null,
WORK_CODE CHAR(18) not null,
AMOUNT NUMBER,
SUPPLIER_CODE CHAR(7),
CHEQUE_NO CHAR(6),
CHEQUE_DATE DATE,
SRC_ID CHAR(8),
PCC_INFO_CODE VARCHAR2(9) not null,
CREATED_DATE DATE not null,
CREATED_BY VARCHAR2(20) not null
tablespace VIDI
pctfree 10
pctused 40
initrans 1
maxtrans 255
storage
initial 64K
minextents 1
maxextents unlimited
-- Create/Recreate primary, unique and foreign key constraints
alter table VIDI_ACCT_MATERIALS
add constraint PK_VIDI_ACCT_MATERIALS primary key (TRANSACTION_ID,PCC_INFO_CODE)
using index
tablespace APREGS
pctfree 10
initrans 2
maxtrans 255
storage
initial 64K
minextents 1
maxextents unlimited
Thanks

In any case, your constraints won't go to the tablespace where your tables resides, rather this information always go into data dictionary, which always
be in system tablespace, however you can force your associated index to be placed in different tablespce.
hare krishna
Alok

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

Hi Friends,
I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
But i want how to add custom tab in which item details were to be attached.
i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
Thanks a lot in advance.
Thanks
Ravi.
can any one give the solution regarding to the above one.
Edited by: ravikanth on Jul 23, 2008 8:13 AM

Hello Priyanka,
I have the same problem by using Service Ticket in SAP CRM 5.0.
Did you already solved this issue? If so, can you please provide the solution!?
How can I activate and check the transfer log?
Thanks and regards
Alex

Facing problem in creating socket in a method from an already deployed application exe while same method is working from another exe from same environment from same location.

Dll Created In: - MFC VC
6.0
Application Exe Developed In:
- VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit
/ Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component which
has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting Error
code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming on
client side so what we did, we created a driver in C# which invokes same method from same environment(on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest: -
We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not working,
actually it is not executing Create () method,
I will give snippet of the code for understanding the problem because we are not finding any kind solution for it.
Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage ;
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Note: -
CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
return NET_INIT;
ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
if(!AsyncSelect(0))
n_Err = GetLastError();
return NET_INIT;
if(!Connect(strIP,n_Port))
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS","");
return SERVER_NOT_CONNECTED;
Code description: -
From
int GETImage_MT() method we call Initialize() method and pass client machine IP and Port and there we call
ConnectTS() method, In this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System
0
Note: - According to logs, problem is coming in Create method().
Here 0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll
from different exe, it is working fine and we are facing any kind of problem. While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

Pointer variable was already initialized; I have mention in code; kindly assist us.
Dll Created In: - MFC VC 6.0
Application Exe Developed In: - VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit / Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component
which has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting
Error code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming
on client side so what we did, we created a driver in C# which invokes same method from same environment (on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest:
- We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not
working, actually it is not executing Create () method, I will give snippet of the code for understanding
the problem because we are not finding any kind solution for it. Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
                   DWORD errorCode = GetLastError();
                   CString errorMessage ;
                   errorMessage.Format("%lu",errorCode);
                   ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
                   return  IS_ERR_WINDOWS;
Note: - CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
          ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
          if(!Create())
                   ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
          n_Err = GetLastError();
          ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
                  return NET_INIT;
          ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
          if(!AsyncSelect(0))
                   n_Err = GetLastError();
                   return NET_INIT;
          if(!Connect(strIP,n_Port))
                   n_Err = GetLastError();
                   ErrorLog(n_Err,0,"ConnectTS","");
                   return SERVER_NOT_CONNECTED;
Code description: - From int GETImage_MT() method
we call Initialize() method and pass client machine IP and Port and there we call ConnectTS() method, In
this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System  0
Note: - According to logs, problem is coming in Create method(). Here
0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll from different exe, it is working fine and we are facing any kind of problem.
While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

Problem in creating a WebService

hi ... i am having a problem in creating a web service using netbeans .. i am using net beans 6 and glass fish v2 ... when i run the clinet appllication an exception comes that is
javax.xml.ws.WebServiceException: Provider com.sun.xml.ws.spi.ProviderImpl not found
but i have followed right steps ... why this exception is coming ..? plz help.....

Hi
please try recreating the EJB , just check whether the home and remote interfaces and the business methods in the home and bean classes are defined properly .Also check whether the ejb editor is showing all the business methods
hope this helps ,please do ot forget to reward points
regards
rajeshkr

Problem in creating a JDBC System on VC7.1 portal ( CE7.1 SP3)

I have a problem in creating a JDBC System on VC7.1 portal (CE7.1 SP3)
I get the following error:
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Could you please let me know if there are any guides on SAP Library; I was not able to find any documentation nor any threads discussing this on VC7.1
Although, I saw this thread Can Visual Composer talk to/connect to any Database?..
which says that VC7.1 can connect to SAP backend
and web services only, and there is no direct connection to the db.
Help needed please.

Hi Dharmi
Here is a quote of Dafna's post in [another thread in this forum|Re: Copy VC controls]
CE7.1.1 will be released at September 2008 for ramp-up customers.
There are many improvements and new capabilities in the new release of Visual Composer for CE7.1.1. Among the new features you can find:
The missing features from Visual Composer 7.0 (Html view, portal Eventing support (EPCM), JDBC, Undo/Redo, and more..)
Many layout & modeling improvements
Additional ALV table functionality - export to Excel, switch to chart, configure ALV behavior at design time
Integration of Visual Composer in Eclipse - additional entry point to the Visual Composer models from the NWDS. This integration provides the option to add a WD component (in case of missing functionality in Visual Composer), as a black box component to the Visual Composer model. Right-clicking the component will open the Web Dynpro perspective for creating/modifying the component.
Regards,
Shai

Problem in creating a build.xml for weblogic portal application

Team ,
I am facing problem in creating the build.xml using weblogic.BuildXMLGEN tool .
a) Below is the structure of my portal application
SrcCode
--- .metadata (eclipse plugins folder)
--- B2BApp ( Ear Content)
--- b2bPortal ( portal related file(controllers,jsp)
--- b2bsrc (java src)
b) Now I executed below utility to generate the build.xml "
java weblogic.BuildXMLGen -projectName B2BApp -username weblogic -file build.xml -password welcome1 F:\srcCode"
c) Based on the above step , build.xml got generated .
d) when I execute "ant compile" target from the command prompt , I see the below exception
ant compile
Buildfile: build.xml
compile:
+[wlcompile] [JAM] Warning: failed to resolve class AbstractJspBacking+
+[wlcompile] [JAM] Error: unexpected exception thrown:+
+[wlcompile] com.bea.util.jam.internal.javadoc.JavadocParsingException: Parsing failure in F:\b2bNew\b2bPortal\src\portlets\b2b\dmr\Picker\PickerController.java at line 58.+
e) I suspect , the problem is bcoz of classpath issues , as I generated build.xml donot have the references to dependent lib's.As build.xml looks like below :
+<target name="compile" description="Only compiles B2BApp application, no appc">+
+<wlcompile srcdir="${src.dir}" destdir="${dest.dir}">+
++
++
++
+.....+
+....+
Please help me to reslove these issues .
PS: I able to deploy the application using 10.3.2 weblogic workshop ( i.e inbuilt eclipse )

i JaySen ,
thanks for your response. As mentioned we added all the necessary library within the -librarydir but still we see the same error :
+[JAM] Error: unexpected exception thrown:+
com.bea.util.jam.internal.javadoc.JavadocParsingException: Parsing failure in F:\b2bNew\b2bPortal\src\portlets\typeAhead\TypeAheadController.java at line 70. Most likely, an annotation is declared whose type has not been imported.
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.getAnnotationTypeFor(JavadocTigerDelegateImpl_150.java:410)
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.extractAnnotations(JavadocTigerDelegateImpl_150.java:176)
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.extractAnnotations(JavadocTigerDelegateImpl_150.java:152)
at com.bea.util.jam.internal.javadoc.JavadocClassBuilder.addAnnotations(JavadocClassBuilder.java:404)
at com.bea.util.jam.internal.javadoc.JavadocClassBuilder.populate(JavadocClassBuilder.java:359)
===================
a) this is a upgrade project [ upgrading from wlp 8.1.4 to 10.3.2 ]
i.e we are using weblogic portal 10.3.2 version.
b) Searched some sites/forums regarding the above error, and it says something related to "jwsc" ant task [ i.e while compiling a webservice(JWS) ], but we see this error while compiling a normal controller(jpf) class :(
c) we are using "ant compile" target which internally calls wlcompile task , while executing wlcompile this error is thrown .
Help Appreciated
Thx,
Sarat

Problem in creating table maintenance generator for 61 fields in table

Hi Experts,
I am facing problem in creating a table maintenance genarator for a ZTABLE which has 61 fields
i am using below details whicle creating the TMG
in Maintenance screen
i am giving maintenance type as two step
Maint screen no overview screen 2
 single screen 3
Dialog Data Transport details
Recording routine standard recording routine
but it is giving following error
screen SAPL<ZTABLE NAME> 0003 could not be generated
In DYNPFIELD_ATTR mandatory field LINE has no value
please let me know how to sort out these errors.
Is there any limit on the number of fields for which we can create table maintenance generetor.
Thanks a lot in advance
Sudipto

Hi Sudipto,
There is not limit to the number of fields of the Table which can be used in TMG for generation. But, from the usability point of view this will horrible.
I created a Z table and added 64 fields and was able to generate the TMG with the screens perfectly. So, I guess there should not be any problem.
Well, have a look at the Function Group. I guess the screen numbers are already used by some other screens. You can set the system to propose freely available screen numbers from the pool.
Also, check whether proper authorization is assigned or not.
And if nothing is working, you can degenerate all the generated screens and then can have a new regeneration of it.
Hope these tips will work.
Thanks,
Samantak

Problem in Creating Check boxes as a column in a table using MVC

I am trying to display a table format using the Model view controlers, with 1st column as a checkbox. if the user chooses some check boxes and submit the screen then i need to update the information in a custome table.
I am having a problem in creating the check boxes, also pls tell me how to catch the line items checked by the user in the table...
Sri

HI Srinivas
 I am not getting what the exact problem is.....
I am giving you a work around.....to me it does not seems to be an Ideal Solution..But Probably it will solve your problem....
Changes To be Made in Page Layout...
In Pagelayout
<htmlb:tableView id = "tvX" width = "100%" visibleRowCount = "8" fillUpEmptyRows = "X" selectedRowIndexTable = "<%= selectedRowIndexTable %>"
selectedrowindex = "<%= selectedrowindex %>"
onrowselection = "select"
selectionMode = "MULTISELECT" table = "<%= sflight %>" />
selectedindexrow is an attribute of type INT4
In Do handle event.....instead of using the previous code use this one...
if event->id = 'SUBMIT'.
DATA: WA TYPE INT4.
LOOP AT SELECTEDROWINDEXTABLE INTO WA.
*Here you can read your table of TABLEVIEW with index *equal to WA into a workarea and then use that workarea *to update the customer table ENDLOOP.
elseif event->id = 'tvX'.
tv ?= CL_HTMLB_MANAGER=>GET_DATA( request = request name = 'tableView' id = 'tvX' ).
IF tv IS NOT INITIAL.
table_event = tv->data.
selectedRowIndex = table_event->SELECTEDROWINDEX.
append selectedrowindex into SELECTEDROWINDEXTABLE.
endif.
ENDIF.
Meanwhile..Let me check why that code does not work.....
Hope it solve your problem....
Cheers:)
Mithlesh

I have a problem in creating a Process Chain(PC).

Hi GURU's
I have a problem in creating a Process Chain(PC). The PC should run on first 3 business days of the month for six times i,e 6am, 7am,8am, 9am,10am,11am.
For this i have created 3 PC like BD1, BD2, BD3, and i selected the Factory calender provided workday 1, 2 , 3 and time for three chains.
Now should i schedule it for 6times in a day.
I tried creating a new job for one of PC's but i have to change the timings for every month (this is not the proper solution).
Please help me.
Regds
Lajwanth

Hi Friend,
For the days part, you can create a new factory calendar with first 3 business days of each month only as working days.
Then in the scheduling -> Restrictions; you can mention that Factory Calendar id and select radio button for "Move job to next working day". Schedule the chain as Periodic "Hourly".
Then for the Time part -> You can insert process type "Decision between multiple alternatives" after the start variant.
After you insert this process type you can create a formula in it to check for system time. In the if condition check for system time i.e., whether it is between 6 - 11. If only the system time is between 6 AM to 11 AM only then the decision step would turn to green and go to the successor step in the process chain.
Process chain would be like:
Start variant -> Decision Step -> Rest of the chain.
So in short the factory calendar will take care of which days the chain will run and decision step will take care of the timings.
Regards
Hemant Khemani

Problem of creating workbook with permanent template?

Hi all,
Iam facing some problem while creating the workbook with permanent template.Let me expalin in detail.
I have created 3 queries (ex:Stock) and i have to insert these in one workbook with permanent template.I had selected the the permanent template option in settings also.iam able to insert the 3 queris and iam not getting the permanent tempalate.which is mandatory.
I tried saving the existing workbook with same tempalate and removed the query and tried to insert the queries but iam getting abbort system error in program
Pls help me out of this issue.
Thanks and regards,
Rajeev

Hi Joe,
We've seen this error when using express VI's inside of template VI's which are loaded using VI server. Are you doing that? If yes, then take all the express VIs that are inside the template VI and turn them into static subVIs.
I don't know if it will help in your case, but let's try it.
Regards,
Luca
Regards,
Luca

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Have you checked out the topics at the right in the More Like This section?
OT

Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3   (name)
4    INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2    3    4    5 SELECT name,id
FROM syn_t;   6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2    3    4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
null

Hi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash

Problem in create constraints

Similar Messages

Maybe you are looking for