Problem in Create New company

Hi ,
I tried to create new company , i got error message like
below" NO MATCHING RECORD FOUND "SEARCH FUNCTION CSHE- ODBC -2028"
i AM USING SAP B1 2005B WITH PL40
REGARDS
SRINIVAS

Dear ,
In some cases this message appears when the decimal settings were
changed and the documents to be reconciled were created with different
decimal places.
Please follow the following steps in the Copy of the database :
1) Goto the Administration > System Initialisation > General Settings >
Display Tab and change the "Amount" of decimal to 6 digits.
2) Goto the Reconciliation and bring the entries to be reconciled.
3) You can check that there's a difference in there to be reconciled
enteries.
4) Creating a balancing entry for the decimal amount.
5) Reconciliation is successfully done.
If the steps above could not solve your issue, please also check the currency setting in your sysytem for the currency using in the transaction that you are trying to do the internal reconciliation. Please also change the currency decimals to 6 and check whether there is amount difference between the two transation.
Also you could check whether your issue is related with the note 1126690 below.
Symptom
When a business partner does some automatic reconciliations, but has
no manual reconciliations, running Restore BP Balance corrupts the
Reconciliation No. counter of this BP. The following error may occur
when you perform reconciliation for this BP:
Internal error "(JDT1) (-2007)
Other terms
Restore BP Balances, Business Partner Master Data, Reconciliation,
SAP Business One.
Reason and Prerequisites
Application error.
Solution
This issue was fixed in 2005B PL39 and 2005A SP01 PL44. In the patches
afterwards, restore BP balance could resolve the issue.
Wish the information above is helpful for you.
Thanks
Apple

Similar Messages

Error in creating new Company

Hi All,
I am getting error when i tried to create new company that "Error in Creating files".
This Error is comming after some tables are created and Finally
new company is created but some data like GL Accounts,Languages,... etc are not cop[ied
Plaese resolve the problem
Regards
Srinivas

Hi Sura,
When you failed to create a new company, nothing can be done but recreate a new one as soon as you find where it went wrong. Log to SAP support might the one viable choice if you could not figure it out.
Thanks,
Gordon

Internal error while creating new company in sap b1 pl 05

Hi all
I installed sap b1 server and clint in PL 05 for USA localization but when I m trying to create new company from login screen system start to create tables but after some time its giving error ''Internal error 101, then system showing that company in list but its not working
Please help me out
RIcky

Hi Ricky,
We had a similar issue and found we had to create the database on another server & restore it. I think, but didn't get around to proving, that the issue occurs where the license service is running using trusted connections

Creating new company in sap b1 8.8

Hi
While creating new company in SAP-B1 8.8, it's giving me the following information.
"Company was not added to read-only DB user. Read-only DB user must be updated manually"
I had also given the SITE password and created the new company successfully.
Can anyone help me on this please.
regards
Sriram.L

Hi Deepak
Thanks for Your response.
I followed the steps you mentioned. While doing that, it's asking for Read Only Db User ID & Password. If i give new ID & Password it gives the following information.
"A Read Only DB USER is assigned for all Company Database, Adding a read only DB user is irreversible. Do you want to continue"
Can you please guide me how this can be taken forward.
regards
Karthik

Problem with creating new user in portal = portlet is not visible

Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
Gilbert

Hi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks.

Problem in creating new communication channel template in IR

Hi experts,
I currently have problems with creating new communication channel template in Integration Repository. If I choose the New-Context (Adapter Objects-->Communication Channel Template) the dialog "CREATE OBJECT" is shown. After I have inserted the Name of my template I push the create button.
Then the following error occurs:
STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED).
So can anybody help me. Thanks for your help.
Best regards.
Mario

Hi Mario,
            This is genral problem appearing in PI 7.0 with SP12.
            Previously, i have the same problem.
            i.e STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED)
            Regarding this we raise an OSS note SAP people.
            they gave the suggestion that update with SP13.
          i discuss with basis team and install the SP13.
           now the problem is solved, i can able to create the Communication Channel Template.
Please award points, if it really help to u
Regards
Mahesh.

Problem in creating new versions for existing DIR using CV01N

I am working in SAP ERP 6.0 EHP 4.0 system.
I have problem in creating new versions for existing DIR using CV01N
I create a DIR version 00 with functional location and mpd cycles. Then when i try to create a new version by copying the contents created from already created document.I change the MPD cycles in the new version and save it.
once when i display the first document created the mpdcycle specified in version 01 is copied to the 00 version.
The document is inconsistent where versioning of document doesnot work properly wrt MPDCYCLE and MP HEADER.
The problem which i found was the document identification guid remains the same for all the document versions getting created.
The same is working fine in SAP ERP6.0 EHP3.0 sytem.
Please someone help me in resolving the above issue.
Regards,
Prasad.B

There is a change in the standard code.The reason for the above problem was because of a missing Enhancemnet point in a standard function module 'CV110_DOC_CREATE_WITH_TEMPLATE'.
IS-ADEC-MPD - Enhancement to copy MPD data
ENHANCEMENT-POINT CV110_DOC_CREATE_WTEMPL_01 SPOTS ES_SAPLCV110.
+*$*$-Start: CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
+**ENHANCEMENT 1 ZSF_AD_MPD_SAPLCV110.    "active version**+
+*** copy MPD relevant data from templ. doc to current doc**+
+**CALL FUNCTION 'MPD02_COPY_MPD_DATA'**+
    +**EXPORTING**+
      +**is_draw = ls_draw**+
    +**TABLES**+
      +**ct_drad = lt_drad.**+
+*ENDENHANCEMENT.**$*$-End:   CV110_DOC_CREATE_WTEMPL_01----------------------------------------------------------$*$*+
Created a custom enhancement point similar to SAP ECC6.0 EHP 3.0 system.
The reason was the buffer was not getting cleared previously.After inserting the above code the DIR's are getting created withot any issues.
Regards,
Prasad.B

Unable to create New Company

We are using SAP business One 2005 B SP00 PL 06 , while creating New Company it display error message like entry already exist in table SEWSY.
Please provide help.

hi bhavnish,
i think you have to restart your system and then again try to create new company.
i have try to create a company, its not given any error to me.
i you able to check your database, then make sure SEWSY table in SBO_COMMON database are blank.
i have checked my database, this table does not have any value.
hope it will help.

I have problems with creating new projects in iMovie.

I have problems with creating new projects. When i try, the mac says the following "Make sure there is enough disk space and that you have permission to write the projects to the drive." I have 8GB available, so its not that.

thanks for your support
lol

How to create stored procedures automatically when creating new company

I need to create a method in our add-on Business One application that will create stored procedures at the time we install the add-on (when the new company is created). Where would I store the SQL scripts, and what SAP Business One commands do I need to use to build the stored procedures into the new company database? Can someone give me an example of how to do this? We are coding in C#, but an example in visual basic would also be helpful if no one out there in forum land uses C#
Thanks,
Nancy Walk
[email protected]

Hi Nancy!
Of course are there people here that use C#
To solve your problem, create a routine in your add-on that checks at startup if the stored procedures are present. If they are not, create them. You can use the DI-API, or just add them directly to your database.
<i>Note: SAP does not like it when you play around directly in the SAP databases, and does not supply support for databases that are changed manually. You'd better use the DI-API...</i>
Hope it helps...
Grtz, Rowdy

Problem in creating new request

hi sap gurus gud mrng.i want a small clarification in creating a new request.
i created a new company after creating a company it should be saved in my company request (by ceating new company request).instead of this i saved it in another company request..how will i change this pls give details.
from
sai

Hi Sai,
You need to follow follwing steps:
You can delete your task from that request.
Create a new task and save into new request.
Best Regards
Ashish Jain

STRANGE PROBLEM with "Create New Mail Account.scpt" when creating POP acct.

I am using "Create New Mail Account.scpt" to create a POP account. It creates the account successfully. It fetches the mails successfully. Now the problem begins. After fetching all the mails once if u click "Get Mail" in mac mail, it fetches all the emails again and has now 1 original and 1 copy of the email set which is on the server. I just need 1 copy of the mail set not multiple. Please give me a solution or direct me to a help.
Thanks
SCRIPT
global theUsername
global thePassword
set success to 1
set theResult to true
if theResult is not equal to false
#set theAccountName to getAccountName()
#set theUsername to getUsername()
#set thePassword to getPassword()
#set theEmailAddresses to getEmailAddress()
#set theFullName to getFullName()
-- POP Account
if accountTypeString is equal to "POP" or accountTypeString is equal to "IMAP" then
set theHostname to "THE HOST NAME"
-- POP specific options
if accountTypeString is equal to "POP" then
set deletionPolicy to my getDeletionPolicy()
if deletionPolicy is not equal to false then
set deletionPolicy to item 1 of deletionPolicy
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
setDeletionPolicy(theNewAccount, deletionPolicy)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
-- IMAP specific options
else if accountTypeString is equal to "IMAP" then
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
getAndSetCachingSettings(theNewAccount)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
end if
if success is equal to 1 then
display dialog "Account created!"
else
display dialog "Account creation failed!"
end if
end if
-- Convenience handler for creating accounts
on createAccount(theAccountType, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
tell application "Mail"
try
if theAccountType is equal to ".Mac" then
set theNewAccount to make new Mac account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "IMAP" then
set theNewAccount to make new imap account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "POP" then
set theNewAccount to make new pop account with properties {name:theAccountName, user name:theUsername, server name:theHostname, include when getting new mail:true, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
end if
on error
set theNewAccount to false
end try
end tell
return theNewAccount
end createAccount
-- Ask the user what they would like to name the account
on getAccountName()
repeat
set theResult to display dialog "What would you like this account to be named?" default answer "Example: My Home Account"
set theAccountName to text returned of theResult
if theAccountName does not start with "Example:" then
exit repeat
end if
end repeat
return theAccountName
end getAccountName
-- Ask the user for the user name for their email account
on getUsername()
repeat
set theResult to display dialog "What is your email user name?" default answer "Example: janedoe"
set theUsername to text returned of the theResult
if theUsername does not start with "Example:" then
exit repeat
end if
end repeat
return theUsername
end getUsername
-- Ask the user for the password for their email account
on getPassword()
set theResult to display dialog "What is the password for this account?" default answer ""
set thePassword to text returned of theResult
return thePassword
end getPassword
-- Ask the user for the email addresses for their email account
on getEmailAddress()
repeat
set theResult to display dialog "What email address would you like to use for this account?" default answer "Example: [email protected]"
set theEmailAddress to text returned of theResult
if theEmailAddress does not start with "Example:" then
exit repeat
end if
end repeat
return theEmailAddress
end getEmailAddress
-- Ask the user for the full name for their email account
on getFullName()
repeat
set theResult to display dialog "What is the full name for this account?" default answer "Example: Steve Smith"
set theFullName to text returned of theResult
if (theFullName does not start with "Example:") then
exit repeat
end if
end repeat
return theFullName
end getFullName
-- Convenience handler for asking the user what settings they would
-- like to have for their special mailboxes. This handler also sets these
-- values in Mail.
on getAndSetSpecialMailboxes(theAccount)
-- Sent messages default to storing locally
set theResult to display dialog "Would you like to store Sent Messages on the IMAP server?" buttons {"Yes", "No"} default button 2
log theAccount
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store sent messages on server to true
else if button returned of theResult is equal to "No" then
set store sent messages on server to false
end if
end tell
end tell
-- Drafts default to storing locally
set theResult to display dialog "Would you like to store Drafts on the IMAP server?" buttons {"Yes", "No"} default button 2
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store drafts on server to true
else if button returned of theResult is equal to "No" then
set store drafts on server to false
end if
end tell
end tell
-- Trash defaults to storing on the IMAP server
set theResult to display dialog "Would you like to store Deleted Messages on the IMAP server?" buttons {"Yes", "No"} default button 1
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store deleted messages on server to true
else if button returned of theResult is equal to "No" then
set store deleted messages on server to false
end if
end tell
end tell
end getAndSetSpecialMailboxes
-- Convenience handler for asking the user what IMAP
-- caching setting they would like to use and configuring
-- it in Mail.
on getAndSetCachingSettings(theAccount)
set theResult to choose from list {"Cache everything", "Cache everything but attachments", "Cache when read", "Don't cache"} ¬
with prompt "Choose a message caching setting for this account:" default items {"Cache everything"} without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
tell theAccount
if (item 1 of theResult is equal to "Cache everything") then
set message caching to all messages and their attachments
else if (item 1 of theResult is equal to "Cache everything but attachments") then
set message caching to all messages but omit attachments
else if (item 1 of theResult is equal to "Cache when read") then
set message caching to only messages I have read
else if (item 1 of theResult is equal to "Don't cache") then
set message caching to do not keep copies of any messages
end if
end tell
end tell
end if
end getAndSetCachingSettings
-- Convenience handler for asking the user whether they want to use
-- an already defined SMTP server (if any) or whether they want to
-- define a new one.
on getAndSetSMTPServer(theAccount)
tell application "Mail" to set everySMTPServer to every smtp server
if ((count of everySMTPServer) > 0) then
set listOfSMTPServers to {}
repeat with eachServer in everySMTPServer
try
set listOfSMTPServers to listOfSMTPServers & name of eachServer
end try
end repeat
createNewSMTPServer(theAccount)
else
createNewSMTPServer(theAccount)
end if
end getAndSetSMTPServer
-- Handler for creating a new SMTP server, if the user has none set up
-- already or if they choose not to use one of their existing servers.
on createNewSMTPServer(theAccount)
set theServerName to "THE SERVER NAME"
tell application "Mail"
set theSMTPServer to make new smtp server with properties {server name:theServerName, port:25, uses ssl:true}
set smtp server of theAccount to theSMTPServer
end tell
getAndSetAuthenticationScheme("SMTP", theSMTPServer)
end createNewSMTPServer
-- Handler for asking the user what authentication scheme their server supports.
-- The options are different for POP, IMAP, and SMTP. Unless you are told otherwise,
-- it's best to leave these at their default settings.
on getAndSetAuthenticationScheme(accountType, theAccount)
if accountType is equal to "POP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "KPOP", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "IMAP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "SMTP" then
set theChoices to {"None", "Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
end if
set theResult to choose from list theChoices ¬
with prompt ¬
"Choose an authentication scheme for this " & accountType & " server. Most servers support 'Password' authentication." default items theDefault without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
set theScheme to item 1 of theResult
tell theAccount
if theScheme is equal to "Password" then
set authentication to password
else if theScheme is equal to "Kerberos 4" then
set authentication to «constant exutaxk4»
else if theScheme is equal to "Kerberos 5" then
set authentication to kerberos 5
else if theScheme is equal to "MD5" then
set authentication to md5
else if theScheme is equal to "None" then
set authentication to none
else if theScheme is equal to "KPOP" then
set authentication to «constant exutakpo»
end if
end tell
end tell
if accountType is equal to "SMTP" then
set theSMTPLogin to theUsername
set theSMTPPassword to thePassword
tell application "Mail"
tell theAccount
set user name to theSMTPLogin
set password to theSMTPPassword
set uses ssl to true
set port to 25
end tell
end tell
end if
end if
end getAndSetAuthenticationScheme
-- Handler for asking the user what POP deletion policy
-- they would like to use for their account.
on getDeletionPolicy()
set theResult to choose from list {"Immediately after being downloaded", "After a specified number of days", ¬
"When I remove them from the inbox", "Always leave them on the server"} ¬
with prompt ¬
"Choose a POP message deletion option:" default items {"Always leave them on the server"} without multiple selections allowed
return theResult
end getDeletionPolicy
-- Handler for setting the deletion policy established in getDeletionPolicy()
on setDeletionPolicy(theAccount, thePolicy)
tell application "Mail"
tell theAccount
if thePolicy is equal to "Immediately after being downloaded" then
set delete mail on server to true
set delayed message deletion interval to 0
else if thePolicy is equal to "After a specified number of days" then
set numberOfDays to my getDeletionInterval()
set delete mail on server to true
set delayed message deletion interval to numberOfDays
else if thePolicy is equal to "When I remove them from the inbox" then
set delete mail on server to true
set delete messages when moved from inbox to true
else if thePolicy is equal to "Always leave them on the server" then
set delete mail on server to false
end if
end tell
end tell
end setDeletionPolicy
-- Handler for asking the user what deletion interval they
-- would like to use, if they are setting up a POP account
on getDeletionInterval()
set theResult to display dialog "After how many days would you like POP messages to be deleted from the server?" default answer "30"
set numberOfDays to text returned of theResult as integer
return numberOfDays
end getDeletionInterval

Hi amiaba, and a warm welcome to the forums!
I can't quite tell what it's doing, but open Keychain Access in Applications>Utilities, click on your Keychain on the left, put .mac in the search bar, once you find it, double click on it and click show password.
If you have no mail in there try this with Mail quit.
Drag this file to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Start Mail & see if it steps you through it.
Not sure on the .uk thing, but is Date & Time>Time Zone set to the UK?

Problem in creating new implementation for filter dependent badi

Hi Experts,
I want to use badi NOTIF_EVENT_POST.It is a filter dependent badi. It is asking filter type while implementing thro se19. Could anyone pls tel me how to create new implementation for the filter dependent badi. Existing filter type is QMART. is there any problem if i change the filter type?
Thanks in Advance!

Hi ,
NOTIF_EVENT_POST is filter dependent and filter values are based on QMART value in table TQ80. You need to specify the filter value ie : QMART value before implimentation , before that check all active implimentations for the same , if u have to impliment on same filter value , you need to deactivate the one which is implimented on same filter value .
You are not supposed to change the filter type.
Regards,
Vamsi
Edited by: CH. VAMSHI on Sep 29, 2009 11:58 AM

Problem in Creating New partition in Pavilion dm4 1217TX

I have a hp Pavilion dm4 1217TX model laptop. I want to partition the hard disk (640GB) to separate the OS to the data. I think this is a very basic safety feature that will save my data in case of Windows failure (which is a very common problem). I have already split the C Drive and the new condition of my hard drive is
System           199 MB       Primary
C                        70 GB       Primary
Unallocated   494 GB       Logical
Recovery           32 GB       Primary
HP Tools        103 MB      Primary
Now I can't create partition in the Unallocated space because of 4 Primary Partition it already has. Now what can I do ? I can't understand that why it comes with four Primary Partition and without any Extended partition.

Hi, there, I have the same problem with you, because of the OEM of the laptop, they have partitioned our hard drive in advanced, however this partition is not logical. As we know, when we install Windows7, the system partition and system reserved partition are set as primary partition without doubt, but how could they make the HP tools and other partition as primary partitino too. I'm very unhappy with this. I don't know WHAT are they thinking about. Every one who has a bit comptuer knowloage knows the rules of createing new partitions in Windows. In my situation, I could only copy the data on recovery to C drive, then delete it. and recreate logical partition, then copy it back. Hope this could also help you.

Problem in creating new/changing paragraph format in sapscript

hi,
i am developing new sapscript form
based on standard sapscript : SD_PICK_SINGLE .
The problem is that I neither can't create new paragraph format in se71
for this form nor change an exist paragrapf format .
does anyone encountered such a problem
and can help me solve it ?
ami

Hi,
     You have copied the Standard Sapscript, but i think you have not converted the Original Language "DE", as the standard one will be in "DE", so it is not allowing you to create new paragraph format or any changes.
      Open the copied Zform in DE language, Click on Menu> Utilities> Convert original language,
      Give From = DE
              To    = EN
Save and Open the Same Zform in EN language and do any modification.
Regards
Bala Krishna

Problem in Create New company

Similar Messages

Maybe you are looking for