Problem in creating a new set using GS01

Dear all,
I am trying to create a set using Tcode - GSO1.
But wehn try to create a SET with Basic Set it is asking for a ref table
can you please help with some links about creating SETS.
I want to create aset where we can maintian a list of Specific userid.
Regards,
Gaurav Sood

Issue resolved

Similar Messages

Can you open an iCloud account without creating a new or using an old AppleID?

Got a new iPhone and had to skip the part of establishing an icloud account till later, cause I was having internet trouble, so it asked me to continue and go back later, then I saw that as I went into icloud in settings later that it is asking for me to creat another Apple ID if I want to set up an icloud account or use one I have for me? Very confusing and not very user friendly. What options do I have? Must I have an a new Apple ID to open an icloud account. I already have an iTunes account that is associated with my iphone and my mac and my AppleID.
My daughter is the one I want to set up an icloud account for so she can back up to it and to use the other features, but I dont want her items to be backed up on my icloud account. The issue is that I don't want her to be able to have her own iTunes account to make purchases, as she is too young, I will need to monitor them for a couple of years yet. I am not sure what to make up of the set up process. The set up instructions are telling me that for that phone to get a new icloud account, I must create a new Apple ID for it or use an existing one. The problem with creating a new one, is she will then be able to set up her own iTunes and appstore accounts and make her own unsupervised purchase I believe?
Presently as its setup now using her old iPod touch and now new iPhone, I create her a playlist in my iTunes account and we then sync her ipod touch or phone to it and she can then get those features and apps, photos that we assign to just her phone.
What is my best option for this situation or do I even have any? I didn't understand the supports page steps in getting an iCloud account and using it in my scenario. it states:
Using the same Apple ID for Store purchases and iCloud is recommended for most users. To use the same Apple ID, follow these steps: iPhone, iPad, or iPod touch: When you first set up your device running iOS 5 or later, enter the Apple ID you use for iTunes in the setup screens. It will be used for Store purchases and iCloud. If you skipped the setup process, enter your Apple ID in Settings > iCloud and Settings > iTunes and App Stores.iPhone, iPad, or iPod touch: or You can use different Apple IDs for iCloud and Store purchases and still get all of the benefits of iCloud. Just follow these steps: iPhone, iPad, or iPod touch:  When you first set up your device with iOS 5 or later, enter the Apple ID you want to use with iCloud. If you skipped the setup assistant, sign in to Settings > iCloud and enter the Apple ID you’d like to use with iCloud. In Settings > iTunes and App Stores, sign in with the Apple ID you want to use for Store purchases (including iTunes in the Cloud and iTunes Match). You may need to sign out first to change the Apple ID. So must I now create a new Apple ID or can I just set up an iCloud account without any AppleID associated with her phone. And if I need a new AppleID, do I need to link it to a credit card?

go to the store and get an iTunes gift card.
you can create an account using that instead of a credit card.

Creating a New Layer Using Icons in Adjustment Palette

When creating a new layer using the icons in the adjustments palette and holding ALT in CS5 a dialog box would appear before creating the new layer. At this point you could rename the layer change the blending mode etc.
In CS6 I do not get the dialog box to appear the new layer is just created. I've tried to reset my preference twice and this has not help. Any ideas?

JJMack wrote:
Your memory has failed
On the contrary, your memory may have failed.
ACJ81 is correct (at least as far as Ps on OS X is concerned) and the problem was mentioned in the forum not too long ago. In CS5, Alt-clicking an icon in Adjustments panel does cause a New Layer dialog to pop open and the dialog fails to appear in CS6.
In CS6 and CS5, the dialog will appear if you pick an Adj Lyr from the Layer > New Adjustment Layer submenu, both with or without Alt modifier. (That lack of control over the appearance of an optional dialog when picking from a menu is an inconsistency in the interface.)
In CS6 and CS5, the dialog will appear if you Alt-click the black and white circle at bottom of Layers panel then pick an Adj Lyr from the menu, as Noel said.

Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'

Hi,
I am using SCOM 2012 SP1
I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the Scope and Counters section. When I try to search for a particular object such as a
port or interface it times out and returns an error. The error is shown below:
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
Support Services for more information.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
languageCode, InstanceQueryOptions instanceQueryOptions)
   at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
   at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
String typeWithIconPropertyName, Boolean propertyCollectionRequested)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
   at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
Has anyone else seen this issue? or can anyone explain what is happening?
Many thanks

Hi,
Asposted earlier,hadt he same problem
when creating a Dashboard widget type
State.
Ones olution I found for this was as follows:
When creating the State widget,the option
to specify the criterion I left blank
and finished the creation of the dashboard.
With that managed to solve the problem.Of course this
is not the solution, or the root cause
of the problem.
I will examine more about this issue, and sohave
the ultimate solution and why such behavior,I post
here.
thank you
Wilsterman Fernandes

Create a new set of skin and style for OC4J

hi, I have created a new set of skin and style
for example,
just duplicated folders s_oracle10 , sk_oracle10 and rename them as s_oracle10b , sk_oracle10b (in \OracleBI\oc4j_bi\j2ee\home\applications\analytics\analytics\res)
however, I found that there is no new choice - oracle10b in the dropdownlist for selecting style.
how to create a new set of skin and style ??

I have read Oracle® Business Intelligence Suite Enterprise Edition Release Notes Version 10.1.3.4.1 E10404-25
=====================================================================
In Chapter 10, the section "About Skins and Styles" contains incomplete
information. The following information should appear after the section's first
paragraph:
Respective Web servers require resource files like styles to be deployed
appropriately for those applications. For example, when using OC4J as is common
in Oracle BI deployments, skins, styles and images need to be duplicated in the
following directories:
– {OracleBI}\oc4j_bi\j2ee\home\applications\analytics\analytics\res
– {OracleBI}\web\app\res
As a rule, customer-specific files like custom styles should live in the
{OracleBIData} folders so these are not lost during upgrades. In this case, the
custom style would then be deployed to OC4J as described above and to the
following directory: {OracleBIData}\web\res
===================================================================== copied from the pdf
we need to copy the new set to two directories.
however, I found that resources of the new set are from {OracleBI}\oc4j_bi\j2ee\home\applications\analytics\analytics\res
not from {OracleBI}\web\app\res
if there is a upgrade or redeployment, will the new set be removed or replaced.
why isn't load from {OracleBI}\web\app\res?
how to configure to make it load from {OracleBI}\web\app\res?
thanks

How can I create a new label using Pages and Avery Labels products?

How can I create a new label using Avery LAbels and PAges on an imac?

Contacts prints to Avery labels.
Otherwise just open the appropriate Word template from Avery's website, in Pages.
Peter

Creating a new document using XQuery

Hello everyone,
I wondered if there was a way to create a new document using XQuery. What I am trying to do is to run a query on XML file and try to print the results in HTML for viewing purpose.
The HTML is spitted out on DOS prompt. Instead I wanted to write that HTML to a file on disk. Is this possible with the XQuery tools provided by Oracle?
Thanks in advance for all the help
K

Folks,
Kinda answering to my question. Just send the DOS output to some file. Pretty Simple huh!
Thankyou anyways
K

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

I wanted to send some photos out but was told I need to create a new profile, use mail icon in control panel no icon there how do I get it done?

I want to send some photos from Firefox, when I tried it said I need to create a new profile, use mail icon in control panel. I went to control panel and do not know what to do.'''bold text'''

As all of the msuic came from your computer in the first place it should still be there. Is it not?
EVERYTHING on your ipod should also be on your computer and should be included in your regular backup copy of your computer.
Make sure that everything is on your computer. You can transfer itunes purchases from the ipod. Without syncing: File>Transfer Purchases.
When everything is on your computer, then it can be synced back to the ipod after updating.

How to create a new material using a BAPI?

Dear friends,
How to create a new material using a BAPI? I mean without knowing the material no., how to just create a new one using function modules(BAPI)?
Thanks a lot!

Dear,
New material can be created by using a BAPI_MATERIAL_SAVEDATA.
More over their are lots of threads available on SDN on the question you raised so kindly search the SDN before posting any thread .
Cheers
fareed

How to create a new component using SPICE?

People, I don't know how to create a new component using SPICE.
I know that it's possible to create a new component and use a SPICE code, but I don't know how to do this very well, and I need the TI ISO124 (Isolation Amplifier), and I have no idea on how to do that. Can somebody help me? I need to develop a layout.
Thank you!!

Hi,
Here is a tutorial that explains in details how to create your own component in Multisim using a SPICE model.
Hope you find it helpful,
Mahmoud W
National Instruments

Creating a new database using an MDF file

My database saves as MDF. I want to know what are the steps to restore or create a new database using a MDF file? I tried to restore as usual but it shows an error. Please help.

An MDF file isn’t a backup file isn’t the main data file (or master data file depending on who you ask) hence the file extension MDF. You can attach the MDF to the database by right clicking on the databases folder in Enterprise Manager (SQL 2000) or Management
Studio (SQL 2005) then selecting all tasks and then Attach Database. When you do this you will get an error about the log file missing. This shouldn’t matter as SQL Server will simply create a new log file for you. This will only work if the SQL Server was
stopped when you copied the MDF file from the old SQL Server. If you copied the file while the SQL Server was running this file probably will not attach either and you will need to get a valid backup of the database.
Download help tool for sql database - SQL Server Restore Toolbox.
http://www.sqlserver.restoretools.com/
You can read up more on SQL Server here.
http://www.filerepairforum.com/forum/microsoft/microsoft-aa/sql-server/498-creating-a-new-database-using-an- mdf-file?_=1416149856104

When I create a new cube using another cube as template which datasource i

Hi,,
When I create a new cube using another cube as template(copy) which datasource is assigned to the new cube, why because am getting all the fields which are there in copied cube even though I used only required fields.why this is occuring?
Thanx in advance,
Ravi

Hi,
Usually, when you copy the cube only data model is copied. means all KF and CHAR, NAV CHAR.
May be after copying you can reassign (CHARS) once again in the New cube as per your requirement.
When you create the update rules, there you can assign the Infosource or original cube as datasource.
may help...
Vis

How to create a new record using a custom method?

Hi I want to create Jdev 11 a new record using the contructor following in the footsteps of http://www.oracle.com/webapps/online-help/jdeveloper/10.1.3/state/content/navId.4/navSetId._/vtAnchor.CACCIJAG/vtTopicFile.adfdevguide%7Cweb_adv~htm/.
My problem is the following.
Messages for this page are listed below.
Error
JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
Error
java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
Error
Object: null is not a known entity type.
Someone can help me?
Cristian.

Hello Frank, this tutorial make it and was successful but, what I am trying to do is add a new record in the table departments. The steps undertaken are suguientes
drag over page the contructor department, with a submit, this will drag on the button, the method presistencia, set binding action with "$ (bindings.Departments.result)", and when running the application gives me the error
Nov 2, 2007 10:06:22 PM oracle.adf.controller.faces.lifecycle.FacesPageLifecycle addMessage
WARNING: ADFc: JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: javax.ejb.EJBException, msg=java.lang.IllegalArgumentException: Object: null is not a known entity type.; nested exception is: java.lang.IllegalArgumentException: Object: null is not a known entity type.
I need to know if what I am doing is right, because I followed the steps of the tutorials and it is not functioning the insertion of a new record.
Thank you thank you.

Problem in Creating a new database in Oracle 9i

I have installed Oracle 9i for Windows successfully. Now when I try to create a new database either using the Database Configuration Assistant or using the script generated by the Assistant, I get an error message that DATABASE NOT OPEN. So the database will not be created. Please help in this regard, so that I can create a database and I can start working on Oracle 9i.
Thanks in advance.
Kiran

Hi DENIS,
I have executed the following commands (which are in a script file),
1. sqlplus /nolog
2. connect sys/change_on_install as sysdba
3. create database ...
4. ...
When I execute the 3rd command, I get an error message as "ORACLE TERMINATED FORCED" and it will end the session. So when the next set of commands in the script are executed, I got the error saying "DATABASE NOT OPEN".
How to rectify this problem.
Thanks in advance,
Kiran

Problem in creating a new set using GS01

Similar Messages

Maybe you are looking for