Problem in creating a web dynpro application in netweaver developer studio.
Hi,
I have installed Netweaver developer studio. while creating a webdynpro project by selecting File->new->project, It doesn't display "web dynpro" option in the project wizard dailogue box.
Please suggest how to resolve this issue.
Thanks.
Hi Babu,
Make sure following plugin folder
"com.sap.ide.webdynpro.ui_xx.yy.zz(for ex:com.sap.ide.webdynpro.ui_2.0.0)"
exists in your ecclipse root folder (for ex:C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\)
It is responsible for the UI selection elements in File->New Project->WebDynpro selection.
If it's not there you will have to copy it. check also other webdypro plugins installed correctly. these plugins comes with default installation of SAP WEBAS.
if all plugins not installed then redo the whole installation but at the same time make sure all plugins installed correctly.
reward points if usefull
Thanks
Praveen
Similar Messages
-
Problem of Creating a web dynpro application based on a car rental web serv
Based original SAP developer studio examples shipped with the developer studio, I first create J2EE application QuickCarRental. It works at http://192.168.254.4:50300/QuickCarRental.
A web service QuickCarRentalWebService is defined in J2EE application QuickCarRental. My web dynpro application TutWD_CarRental is web service consumer invoking QuickCarRentalWebService.
When I deploy TutWD_CarRental on SAP J2EE engine and run the application at http://192.168.254.4:50300/webdynpro/dispatcher/local/TutWD_CarRental/CarRentalApp, i can see the web dynpro web application interface right.
however, I get the following error when I input some data and Click button rent a car.
Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.
when i click Display all bookings, the error is:
Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found.
I install SAP developer studio on my winXP desktop, and the SAP developer studio version is 2.0.10.
I have my SAP Web application server and J2EE engine Version 6.40 run on a different machine. the SAP server IP address is 192.168.254.4
could anybody give me some clue on this. is that because i miss some configurations on SAP server for enabling web services of QuickCarRentalWebService?
Thanks!
ThomasHI
Find here.
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/9fc0e990-0201-0010-199c-e38fc6dafb5d
Thanks
Lohi. -
Error - Creating a Web Dynpro Application Accessing ABAP Functions
Dear All,
we are trying to implement a web dynpro application with accessing ABAP functions.
Previous tasks:
- insert the ABAP system into the SLD from the NWDI System (Transaction RZ70; the ABAP system is correctly insert into the SLD => technical systems)
- equipped the JCO connections with the web dynpro content manager (ping and test = OK)
Its the standard tutorial out of the SDN called Creating a Web Dynpro Application Accessing ABAP Functions.
Some hints:
- There are no errors after the implementation and the rebuild of the project in the NWDS
- The auto deployment works fine to the development runtime system. The application is shown in the Web Dynpro content manager
- The In the build log I found these entries:
System.err] [Invoked from com.sap.s2x.tools.GUID.getnodeaddress(GUID.java:585)]
[System.err] java.net.UnknownHostException: FRASAPP562: FRASAPP562
[System.err] at java.net.InetAddress.getLocalHost(InetAddress.java:1191)
[System.err] at com.sap.s2x.tools.GUID.getnodeaddress(GUID.java:575)
[System.err] at com.sap.s2x.tools.GUID.<clinit>(GUID.java:179)
[System.err] at com.sap.s2x.tools.S2XGUID.getGUID(S2XGUID.java:19)
[System.err] at com.sap.ide.metamodel.core.i18n.LanguageState.createS2XID(LanguageState.java:191)
[System.err] at com.sap.ide.metamodel.core.i18n.S2XLanguageUnmarshaller.unmarshal(S2XLanguageUnmarshaller.java:52)
[System.err] at com.sap.ide.metamodel.core.i18n.TextPoolProxy.loadLanguageState(TextPoolProxy.java:703)
[System.err] at com.sap.ide.metamodel.core.i18n.TextPoolProxy.prepareLanguageForRead(TextPoolProxy.java:646)
[System.err] at com.sap.ide.metamodel.core.i18n.TextPoolProxy.isEmpty(TextPoolProxy.java:222)
[System.err] at com.sap.ide.webdynpro.checklayer.MDOChecker.check(MDOChecker.java:23)
[System.err] at com.sap.ide.webdynpro.checklayer.view.ViewChecker.check(ViewChecker.java:52)
[System.err] at com.sap.ide.webdynpro.checklayer.controller.ViewControllerChecker.check(ViewControllerChecker.java:96)
[System.err] at com.sap.ide.webdynpro.checklayer.controller.ControllerChecker.check(ControllerChecker.java:119)
[System.err] at com.sap.ide.webdynpro.checklayer.controller.ControllerChecker.check(ControllerChecker.java:56)
[System.err] at com.sap.ide.webdynpro.checklayer.component.ComponentChecker.check(ComponentChecker.java:181)
[System.err] at com.sap.ide.webdynpro.checklayer.component.ComponentChecker.check(ComponentChecker.java:56)
[System.err] at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2039)
[System.err] at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1296)
[System.err] at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
[System.err] at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
[System.err] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[System.err] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[System.err] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[System.err] at java.lang.reflect.Method.invoke(Method.java:324)
[System.err] at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
[System.err] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[System.err] at org.apache.tools.ant.Task.perform(Task.java:364)
[System.err] at org.apache.tools.ant.Target.execute(Target.java:341)
[System.err] at org.apache.tools.ant.Target.performTasks(Target.java:369)
[System.err] at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
[System.err] at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:112)
[System.err] at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:61)
[System.err] at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:213)
[System.err] at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:190)
[System.err] at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
[System.err] at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
[System.err] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[System.err] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[System.err] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[System.err] at java.lang.reflect.Method.invoke(Method.java:324)
[System.err] at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
[System.err] at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:102)
[System.err] at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:76)
[System.err] at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:58)
[System.err] at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1723)
[System.err] at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1495)
[System.err] at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:727)
[System.err] at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:503)
[System.err] at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:442)
[System.err] at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:314)
[System.err] at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:252)
[System.err] at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
- Im able to start the application out of the Web Dynpro content manager with run => only the user interface is displayed without any functionality
- The normal start over the NWDS fails => error text
com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'local/J08_Flugdat_Daventdcflight~xxx.com' and application 'FlightListApp' are not deployed on the server. Please check the used URL for typos.
There two different URLs in use.
Start via NWDS:
http://frasapp562:50000/webdynpro/dispatcher/J08_Flugdat_Daventdcflight~xxx.com/FlightListApp
Start via web dynpro content manager:
http://frasapp562:50000/webdynpro/dispatcher/xxx.com/aventdc~flight/FlightListApp
For test purposes, we started the BAPI (BAPI_Flight_Getlist) on the ABAP system directly. It works.
Any ideas about the system behaviours (different URLs and missing functionality)?
Thanks a lot in advanced!
Best regards
ChristophThe Error has been solved The implementation of a method was missing....
Thx
Christoph -
What to after Creating a Web Dynpro Application
Hello,
My question might a little stupid so please don't mind. I have created a web dynpro application where the user enters a sales order no and the output of is shown in an ALV format in web dynpro. My question is what next, I mean how do I give it to the users to use it. They should only be given the URL which is generated?
Also if i directly enter the URL it asks me for my Username Password of the SAP Logon. can this be avoided like some reports where one cant make any changes in the database just get the output this Username Password thing be skippedHi.,
You can create a Transaction for Web Dynpro Application to dispaly in browser as well as in SAP GUI.,
check this: can we create a tcode for webdynpro application?
else you can integrate it in Portal by creating iviews.,
check this article: [How to integrate Web Dynpro ABAP in Portal|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/008fc414-997f-2e10-3899-fd895ec8eb5e]
hope this helps u.,
Thanks & Regards,
Kiran -
Creating a Web Dynpro Application Accessing ABAP Functions
Hi all,
I implemented Creating a Web Dynpro Application Accessing ABAP Functions .But recently i heared a new word BW query.Is it not wat i did in the above application or is this a new backend sytem , does it have a new procedure to create model for BW Query in webdynpro rather than what i did in the above app
Regards
Padma NThe Error has been solved The implementation of a method was missing....
Thx
Christoph -
Need to create a Web Dynpro Application for SRM Portal
We need to recreate the start page for SRM Portal - (Supplier Self-Services) - without any images (as was delivered out of the box) - basically we need to break it down into 4 iViews: All Purchase Orders; All Sched Agreement Releases; All Invoices and Credit Memos; and Account History. All these iViews contains links.
How would one create a Web Dynpro Application to create the above iViews?
Regards,Hi zhang,
take a look to this:
KM:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/kmc/resource%2band%2bcollection%2bversioning%2busing%2bkm%2bapis
https://help.sap.com/javadocs/NW04S/SPS09/km/index.html
Excel:
/people/subramanian.venkateswaran2/blog/2006/10/02/enhanced-file-upload--uploading-and-processing-excel-sheets
Hope this help you.
Vito -
Problem in Closing a web dynpro application
Hi experts,
I wanted to close the application when the user clicks on the close button.
I created a out bound plug "EXIT" of type 'EXIT' in my window.
I also created a parameter "CLOSE_WINDOW" of type "WDY_BOOLEAN" for the outbound plug
Now in action of the close button i have done the below code:
DATA: l_ref_ywd_maintain_catalog TYPE REF TO ig_ywd_maintain_catalog .
l_ref_ywd_maintain_catalog = wd_this->get_ywd_maintain_catalog( ).
l_ref_ywd_maintain_catalog->fire_exit_plg( CLOSE_WINDOW = 'X'
where ywd_maintain_catalog is my window name.
when i check the program i am getting the below error:
get_ywd_maintain_catalog_ctr is unknown or protected or private.
I refered the standard web dynpro component "WDR_TEST_EXIT_PLUG" to implement the logic
Pls help
Regards,
VinodHi all,
This is my requirement when i click on a close button the application should close.
i refered to a web dynpro component "WDR_TEST_EXIT_PLUG" where they have explained the way to use exit plug.
They have created a outbound plug in the window called "EXIT" of type exit. and in the action of the button they have used the below code to fire the outbound plug.
method onactionfire_exit .
data: l_ref_wdr_test_exit_plug type ref to ig_wdr_test_exit_plug .
l_ref_wdr_test_exit_plug = wd_this->get_wdr_test_exit_plug_ctr( ).
l_ref_wdr_test_exit_plug->fire_exit_plg(
url = 'http://www.google.de/'
endmethod.
I followed the similiar approach in my code:
I created a out bound plug "EXIT" of type exit in my window.
then in the action of the close button i have done the below code:
DATA: l_ref_ywd_maintain_catalog TYPE REF TO ig_ywd_maintain_catalog .
l_ref_ywd_maintain_catalog =wd_this->get_ywd_maintain_catalog_ctr( ).
l_ref_ywd_maintain_catalog->fire_exit_plg( CLOSE_WINDOW = 'X'
The problem i am facing is i am getting the error "method get_ywd_maintain_catalog_ctr is unknown or public or private"
I am referred to the below URL to do it :
link: [Exiting a Web Dynpro Application by pressing a button on a Web Dynpro View]
Regards,
Vinod -
Creating mobile web dynpro application which customized theme
Hi guys,
I have created a mobile web dynpro application and a theme with Theme Editor. Then I have appended this theme with the sap-cssurl parameter to my application.
<b>my_application? sap-cssurl=http://host:port/webdynpro/resources/sap.com/tcwddispwda/global/SSR/themes/MyTheme</b>
It works well in my first testing on my laptop.
In order to test it on my mobile device I have also appended sap-wd-client parameter to my application. Now my URL looks like
<b>my_application? sap-cssurl=http://host:port/webdynpro/resources/sap.com/tcwddispwda/global/SSR/themes/MyTheme&sap-wd-client=PieClient</b>
It doesnt work. My application layout looks as if I dont use the theme. Did somebody have the same problem and can help me by finding a solution.
Thanks for your answers.
MaritaHi Marita,
Mobile Web Dynpro supports several handheld mobile devices. I guess yours is a Pocket PC. Except the newest Pocket PC 2003, all the other versions don't have CSS support. Therefore the current Pocket PC client "PieClient" of Web Dynpro lacks the ability for customized themes. On the other hand, themes are supported for more advanced devices, such as Nokia Communicator 9500/9300.
Regards,
Wei -
Problem with starting the Web Dynpro Application
Hello,
I have a problem with my web dynpro application, which is in our SAP Portal. We have three different systems (development, test, production). In production always the follewing error message occurs:
The URL https://zsil2401.servers.wacker.corp:9004/sap/bc/webdynpro/sap/ZPLM_EN_FORM_300MM/ was not called due to an error.
Note
The following error text was processed in the system P1A : is not a valid attribute type.
The error occurred on the application server zsil2401_P1A_04 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GETATTRIBUTE_RTTI of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: INIT_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: CREATE_FROM_STRUCT of program CL_WDR_CONTEXT_NODE_INFO======CP
Method: IFWDR_RG_CTRL_HANDLE~INIT_CONTEXT of program SAPLWDR_RG_GENERATED_SRC_API
Method: IFWDR_INTERNAL_API~INIT_CONTEXT of program SAPLWDR_RG_PROXY_FACTORY
Method: CONSTRUCTOR of program /1BCWDY/35DSOWFU6YQV6I81U8VG==CP
Method: IF_WDR_CLASSLOADER~GET_COMPONENT_CONTROLLER of program /1BCWDY/35DSOWFU6YQV6I81U8VG==CP
Method: CONSTRUCTOR of program CL_WDR_DELEGATING_COMPONENT===CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Some User get this message also in test an development. What could be the reason?
Note: Nothing has changed in coding or context.....this error occurs without any changements
Thanks for your help
Best Regards
MartinHi,
May be you can put an external breakpoint in the method "_get_attribute_rtti"(of class CL_WDR_CONTEXT_NODE_INFO).
From that you can find out which attribute is causing the dump , and try to solve the issue . May be some data dictionary object is not transported to production.(Assuming that you have permission to put breakpoints in production system..:))
Aditya. -
Problem while creating SAP Web Dynpro iView
Hi,
I am creating SAP Web Dynpro iView from iView Template.
The SAP Web Dynpro System Object is being created. The System Alias is also being created.
The Test Connection is successful with Portal Server.
Now, while creating SAP Web Dynpro iView from Template in Step 4:
I am not getting my System while an old system which is being deleted is being displayed.
Name of my System Object is: WD_System and System alias is: WD_Alias.
The Step name is:
Step 4: Application Parameter
Enter the paramater(s) of the application for which you want to create the iView
Regards
Kaushik BanerjeeHi Bala,
I am not getting the System Alias under:
User Administration-> User Mapping-> Logon Data(Select a Principal) (System Alias).
The System is successfully built under System Amininstration->System Configuration->System Landscape->Portal Content->kaushikb named WD_System and System Alias is named as: WebDynpro_alias.
The Test Connection is successful.
I am displaying the result below:
SAP Web AS Connection
Test Details:
The test performs the following:
1. Checks the validity of the system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Checks if a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (kolapon:50000)
5. The host name kolapon was resolved successfully.
6. The server kolapon was pinged successfully.
7. The WAS ping service http://kolapon:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the WAS, you can try to call the ping service manually.
8. An HTTP/S connection to http://kolapon:50000 was obtained successfully.
Regards
Kaushik Banerjee -
Build Web Dynpro project EAR without Developer Studio
Is it possible to build Web Dynpro project EAR file without Developer Studio? All possible solutions are welcome (console, scripts, java etc.) I want to integrate the project into CI Server and try to find way for automatic build.
Thanks.Yes. Sure. But as i can see, during generation of EAR there are some files like (Project)App.xml, (Project)Component.xml that regenerated each time i create EAR from Developer Studio. I don't know the logic of creation of these files. Is there standard ant build script from SAP which i can use?
Edited by: Artem Pasko on Dec 26, 2007 2:02 PM -
How to create a web dynpro application to open the KM Files?
I want to create a webdynpro application to open the <b>KM Excel files</b>?What would i do ?Can anybody help me ?
Hi zhang,
take a look to this:
KM:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/kmc/resource%2band%2bcollection%2bversioning%2busing%2bkm%2bapis
https://help.sap.com/javadocs/NW04S/SPS09/km/index.html
Excel:
/people/subramanian.venkateswaran2/blog/2006/10/02/enhanced-file-upload--uploading-and-processing-excel-sheets
Hope this help you.
Vito -
Error while creating web dynpro application
Hi All
I created one web dynpro application but while executing 1 encountered 1 error below :
"Die URL enthalt keine vollstandige domainangabe (The URL does not contain full domain specification) (gcecc62 statt gcecc62.<domain>.<ext>)."
Please help how to solve this issue..
thanks in advance
Regards
BrillionHi Brillion,
Check FQDN Configuration..
Go through this...
<-- removed by moderator -->
Also check this thresads similar ones..
<-- removed by moderator -->
Cheers,
Kris.
Moderator message: please do not just post links.
Edited by: Neil Gardiner on Aug 5, 2011 3:40 PM -
Authorization Missing error while creating web dynpro Application
Hi experts,
I am new to web dynpro and trying to learn it by myself. I am getting an authorization error while creating a web dynpro application. I am not getting any errors while activating Views or Windows. But when I created a web dynpro application and tried to save it, it thew me a warning saying that " You are not authorized to use function Netzwerkadministration " . Still I could be able to create the application, but not able to run it.
What settings should be done to have this authorizations ?
Any suggestion would be helpful.
Thanks,
RVSSHi,
Get your BASIS person to give you authorization to Tcode SICF and also authorization to create and activate services in Tcode SICF.
You need authorization to object S_ICF_ADM apart from authorization to tcode SICF
Regards,
Ajay
Edited by: ajay matam on Sep 9, 2009 12:04 PM -
Problem deploying Web Dynpro Application Definition
Hi,
I have written a Web Dynpro and then deployed it to an EP6 NW04 server without first defining the Web Dynpro Application (silly me, I know - how could I do such a thing?). Anyway, afterwards, I created the Web Dynpro Application definition, but no matter how many times I redeploy, it does not add it to the Web Dynpro now sitting on the server.
Können Sie mir bitte helfen?
MartinHi
Martin,
Although server is being maintained by third part(one option is though visual admin since you can't access it) other option is use youe web browser with url http://your server IP address:50000/index.html u will find webdynpro link as mentioned below
<b><u>Web Dynpro</u></b>
Web Dynpro is a User Interface technology available within the SAP NetWeaver Developer Studio.
Various Web Dynpro tools provide administrators and application developers with performance measurement and application administration capabilities. The Web Dynpro runtime is already deployed.
Now Click on <b><u>Web Dynpro </u></b> link
you will find Content administrato and web Dynpro administrator u will b directed to login page after entering with UID and passwd u can see all deployed applications ( u can check ur application) and details...
I hope this may help u..
RK
Maybe you are looking for
-
Hi all, I have two regions on my page. One is a tree region, and the other one is report region. What i would like to do is when I click on a node, to get some info about it in an item on the report region. my tree query looks like that: select "ID"
-
How to get rid of: Would You Like To See Your Photos on a Map?
Every single time I edit a photo in Aperture I get this annoying question: "Would you like to see your photos on a map?" Enable GPS tracking - yes or no. How can I get this pop-up screen permanently off of Aperture? Sometimes this causes Aperture to
-
Bought brand new Toshiba A500 laptop, but no Windows 7-64 CD/DVD
Bought brand new Toshiba A500 laptop, but no Windows 7-64 CD/DVD's came with it, just the programs installed on the computer. Since I have been a long-time Dell customer, where all programs installed also come with various CDs/DVDs, I am rather surpr
-
Query related to Certification of Hyperion DRM
Hi , Can you please tell me if there is any certification of Oracle Data Relationship Management (DRM)? Thanks Simran
-
In Windows Explorer, I can right click a folder and click "Command Line Here" to launch the command prompt at that path. Is this doable in Leopard? Thanks.