Problem in creating business partner

Hi,
When we create business partner from customer in RE Classic in Create lease out(T-code FOV1) , system is not copying the address of customer to business partner.
Thanks in Advance

Hi,
Check note:
Note 681760 - Business partner: No copy of object address
Regards,
DAS

Similar Messages

Problem when creating business partner

Dear Expert,
I have a problem when creating business partner from T-code BP
I can't input vendor number in company code header data
The vendor account field is set to required entry.
When create business partner, I make some entry like :
Business partner category : organization
BP Role                           : Landlord with vendor account
Grouping                          : external number assignment
Company Code                 : 1000
The problem is everytime i try to input vendor number, it always failed.
The Vendor account field always display ' <external> '
It's strange.. the vendor field it's seem locked by grouping
What should I do??
___Company Code Header Data___
Company Code :   1000
Customer          :   <external>
Vendor              :   <external>
I need your advise.. thank you very much
Thanks,
tweety

Hi,
I would like to suggest you some SAP notes that contain useful information aobut customer-vender intergration of ERP2005.
956054 BP_CVI Customer-vendor integration as of ERP2005 (ECC600)
This notes describes the changes (new development) of CVI AND the necessary customizing settings.
In short, CVI is now bidirectional.
1. BP -> Customer/Vendor: it depends on the roletype configuration, if a customer/vender is created.
2. Customer/Vendor -> BP: it depends on the account group if a BP is created.
Data is changed then synchronoously.
Further notes that might be of interest.
851445 BP_CVI: Details about reports to be executed for ERP 2005
727205 Conversion of industry Customizing in BUPXPRA12
1077616 Business Partner Upgrade FAQ
If you have further questions please let me know.
Regards, Franz

Problem in Creating Business Partner in E-REC system.

Hi Dear Friends,
We are using SAP E-REC as External Instance . Problem is when we move Master data from ECC to E-REC infotype 1001 ( Sub type A 0008 ) is not moving so that Business Partner also not getting Created . I checked the INBOUND and OUTBOUND of IDOC there is no issue . I tried with report HRALXSYNC where i could see (All Objects > Central Persons > Without Partner) when i tried to Repair i ended with warning message '
Form of address 0001 does not exist and Form of address 0002 does not exist
. However i got SAP note " 1412534 - Message "Form of address & does not exist" when creating BP"
I couldn't understand what is this form of address ? how to maintain this ? if it is mandatory how it has created BP for remaining users?
Also i tried with RHINTE00.10,20,30 programs , Can anyone help me to solve this issue ?
And some time when i use PFAL Central Person itself not created . . how to fix this ? ?
Thank you friends

Hello Saket,
The error "Personal Address does not exist" (AM013) indicates a DB inconsistancy. That is the address number in table BUT020 does not have data in table ADRC. Please check whether this is your case.
If you can recreate such error in a non-modified SAP enverionment, please raise a customer message to SAP.
To correct the inconsistancies, please use the reports in note 865271 and note 1096330.
Best regards,
Maggie

Problem in Creating Business Partner through BP

Hi All,
I am facing a problem in creating a business partner through transaction BP. I am selecting the Create Person tab. Selecting 'Employee' as BP role, choosing Xxternal Assignment. I am also giving mandatory fields like First name , last name and country. When i am saving it it is getting saved but an error message comes which says "Personal Address does not exist".
The entry comes in table BUT000 also but when I go to BP transaction again and open the Business partner it is not opening giveing the same error message. Please help in resolving this.
Thanks & Regards,
Saket

Hello Saket,
The error "Personal Address does not exist" (AM013) indicates a DB inconsistancy. That is the address number in table BUT020 does not have data in table ADRC. Please check whether this is your case.
If you can recreate such error in a non-modified SAP enverionment, please raise a customer message to SAP.
To correct the inconsistancies, please use the reports in note 865271 and note 1096330.
Best regards,
Maggie

Problem with creating business partner via BAPI

Hello! I have a simple File-RFC-File scenario:
XML-file with Firstname, Lastname and PartnerCategory. I use BAPI_BUPA_CREATE_FROM_DATA to create a partner with this data.
It works, in target file I have a number of new business partner, but I can't find new partner in the system. Like I only tested BAPI_BUPA_CREATE_FROM_DATA in "bapi" transaction without real effect.

Hi,
probably you didn't comit the BAPI
RFC adapter allows to specify comit for BAPI
add this to your RFC channel configuration and you will see the partner
for more info read section:
Commit Control for Single BAPI Calls
from
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
Regards,
Michal Krawczyk

ERROR IN CREATING BUSINESS PARTNER ON DOING IT 2ND TIME - SAURAV LAHIRY

Hi friends,
                     I a currently using a custoM tcode zib52 to create a business partner in CRM. My problem is that on creating the first time the Busness partner it is getting created. But on pressing it in the change mode and then clicking the create patient button it is giving a short dump. I am using FM BUP_PARTNER_MAINTAIN where i am giving '01' for create.
                                                                   Regards,
                                                                   SAURAV LAHIRY[error1.htm]

Hi All,
Thanks for your quick reply.
Recently SAP has upgraded support packs and becuse of this dump is occuring. Piece of extra code has got added in existng code. We can not chage / comment that cde as the probe is in Zt-cde. But even if it is custm transaction, any standard includes havebeen used. And in sme of those include, that piece of code has got added.
Steps - First time business partner is getting created successfully. but when we save it, go back and cick on create business partner than it is going into short dump.
i had debug the code and found that GUID number is not getting cleared i second time.
can you please tell me how to clear GUID number? is there any FM / methods? Aso can you tell me hw to refresh/ clear global memory for FM BUP_PARTNER_MAINTAIN?
Thanks in advance
Saurav

Error while Creating Business partner in FPP1

Hi,
I can't create Business partner in standard T.code FPP1 in Test System and getting the following error
"Application object BUPA: Table EBUPD does not exist".
Kindly help me in solving this issue.

Hi Venkatesh
Please add the message class and message number - in this case R1 149 - next time you post a problem.
There's probably an issue with your setup with for the Business Partner Screen Layout (area menu BUPT).
The error is raised, because the EBUPD is not a table assiciated with the Business Parter (Application object BUPA). See transaction BUSG or table TBZ1H. It is in fact a dynpro structure.
Now there's a table that links the dynpro structure fields to the db table fields, which should translate the structure EBUPD into table EKUN fields: TBZ1C. Technically, this is done in function BUS_DYNFLD_TO_DBFLD_CONVERT and it returns the dynpro structure instead of the DB table if there's no corresponding entry in TBZ1C.
So please check if you can find following entry in TBZ1C (client dependent):
OBJAP DYNPTABNM DYNPFLDNM DBTABNM DBFLDNM
BUPA EBUPD + EKUN +
Or via transaction BUSP - Screen field --> Database Field
If the entry is missing I suggest you add it.
Yep
Jürgen

How to create business partner in solman

How to create business partner in solman?...

Hi,
Check pages 8 - 11 in this document.
https://websmp209.sap-ag.de/~sapidb/011000358700001197002005E/Addtional_Information.pdf
This would solve your problem.
feel free to revert back.
--Ragu

No users available in the change period (Create Business Partner)

Hello!
I would like to set up the business partners for Service Desk.
If I choose the solution and execute "Edit --> Create Business partner"
no useres are shown under the system.
If I change the data selection for an earlier time or blank, the situation does not change, meanwile I have enough users in the satelite systems.
How can this problem be solved?
Should the user have special autzorizations?
Thank you very much!
regards
Thom

Hello!
Thank you for your response.
Unfortunately it does not connection with adding some roles to all the users in the satelite systems.
I have done this, but without success.
<b>Has someone other information how to see the users from satelite systems in Solution Manager for assigning them to the business partners?</b>
(I have SAP R/3 Enterpeise 4.7)
What very strange is: for the local Solution Manger all the users are shown.
Thank you!
regards

Role to create business partner

Hi Experts,
I am facing a problem that I want to create a role for the user and this role is for create business partner and the spacification is tat if one user careate a business partner then only that user can edit that business partner no other user can edit this business partner ( other user can see it only in display Mode).
Regards,
Sid

Hi Sid,
I must say - this is a very interesting problem !
Can you try this approach - in the event AUTH1 (accessible from transaction BUS7), register your custom module. In this custom module, you would need to check if the BP you are trying to open has been created by you or not. Allow the activity to be 'Edit' only if you are the creator of the BP.
Technically, you need to check if BUT000-CRUSR = sy-uname.
If this condition is violated, you will need to change activity mode to 03 (display).
The event AUTH1 is triggered when you open a BP or try to switch to change mode, so it will be a good point for you to control the access.
I hope this helps.
Cheers,
Rishu.

Dump Error while creating Business Partner in FPP1

Dear Experts,
I am using the EHP5 IS-U component. I am getting the below dump error, when I am trying to create Business partner in T.Code: FPP1.
**Error in the ABAP Application Program**
**The current ABAP program "ISU_BUPA_EVENT_DINP1==========FT" had to be terminated because it has come across a statement that unfortunately cannot be executed.**
**The following syntax error occurred in program "SAPLES02 " in include "LES02U14 " in line 30:**
**"The data object "BUS0DIINIT" does not have a component called "MUSTER_KUN".**
I have searched SAP notes, but I am unable to find any suitable notes to resolve this issue.
Could anyone help me to resolve this issue.
Thanks in Advance,
Regards,
Aswin

Hi,
Please don't go adding fields. Aren't we talking about SAP-standard structures here?
Have you actually checked (in transaction SE11) that the structure ISU_EKUNINIT is included in the BUS0DIINIT?
If it is, and the field MUSTER_KUN is missing, then you should raise an OSS note.
If the structure is not included, you should also talk to OSS. Your ISU installation might be incomplete?
cheers
Paul Bakker

Geocode Error while creating Business Partner in Audit Management

Hi All,
When I try to create business partner in PLMD_AUDIT and assign it to various partner roles like Auditor, Responsible person etc. I am getting error as " Geocoder SAP0: Country specification is (Customizing) " What should be done to avoid this error?
Found details in spro:
For "SAP0 Geocoder" there is no function module and destination assigned, Is it the cause of error? If it is the case then what should be assigned and Let me know the standard function module.
Regards,
Ram.

hi Keerthi,
553073 is the sap note for geocode error in country specification.
Regards,
Ram.
Edited by: Ramachandran Jayaraman on Jun 9, 2008 3:18 PM

SLG1 error while creating Business Partner

Hi,
Im currently working on SRM 7.0 and keep receiving the following errors in SLG1. Can you kindly advise what might be the root cause for the below errors so ican fix the issue and ensure the same error doesnt pop up going further?
Error type 1:
Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXX
The region 00 is not defined for country DE
Error type 2:
Error: Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXXX
The transport zone ZOC0000001 is not defined for country YY
Error type 3:
Error:Error while Creating Business Partner (BP) Module: BUPA_CREATE_FROM_DATA Vendor: XXXXXX
Email address "whatever email" is invalid
Appreciate your feedback
Akshay

Hello Akshay,
Resolution for Isuue 1:
SAP Web Application Server -> General Settings -> Set Countries -> Insert Regions or Define Country Codes
Region for country DE is not maintained in SPRO or bad data.
Resolution for Issue 2:
SAP Web Application Server - Application Server - Basis Services - Address Management - Maintain Transport Zones
Maintain the transport zones in SRM.
Resolution for Issue 3:
email address should be a valid address. SRM checks the format e.g. xx @ yy . zzz
I believe error could be due to incorrect data.
Hope this solves.
Ashutosh

Error in creating business partner through transaction FPP1 in ECC6.0

HI,
We have upgraded our system from 4.7E to ECC6.0.Now when we are trying to create business partner through transaction FPP1 we are getting error as " Exception condition "NO_ACTIVE_TAB" raised."
Can any one help us in rectifying the error and tell us the possible causes of error.. .??
Regards,
Shruti Singh

Hello,
Notes 696189 & 618123 may be of some help to you....:)
Regards
Olivia

How to create Business partner from uploaded file by Function module?

Hi Experts,
I have uploaded Business partner data from a file to server now from individual records I have to create Business partner and have to update the records in the tables. Means from on record i have to create one business partner in sap system.
I have uploaded the records in the system and stored in a internal table.Now my task is to create business partner and have to update tables.
I need a function module which create BP by each records uploaded and update the respective tables of BP and exports business partner ID.
Please respond soon Its a requirement form the client.
Prem.

HI，
   You can use the bapi 'BAPI_BUPA_CREATE_FROM_DATA' to create a business partner .
call function 'BAPI_BUPA_CREATE_FROM_DATA'
          exporting
            businesspartnerextern              = g_bpartner-partn
            partnercategory                    = partnercategory
            partnergroup                       = partnegroup
            centraldata                        = centraldata
            centraldataperson                  = centraldataperson
            centraldataorganization            = centraldataorganization
*       CENTRALDATAGROUP                   =
            addressdata                        = addressdata
*       DUPLICATE_MESSAGE_TYPE             =
*         IMPORTING
*            BUSINESSPARTNER                    = G_BPARTNER-BUSINESSPARTNER
         tables
            telefondata                        = telefondata
            faxdata                            = faxdata
            e_maildata                         = e_maildata
            return                             = return
*       ADDRESSDUPLICATES                  =
            addressnotes                       = addressnotes.

Problem in creating business partner

Similar Messages

Maybe you are looking for