Problem in creating iViews.

Hi,
In Enterprise Portal Page I am not able to create iview. Previously it worked fine, if I right clicked folder under portal content it would show following options like New,New from PAR,open,refresh, change id, delete , copy and cut but now its shows following options like open,open in new window, Save target , Print target, cut ,copy , shortcut and properties.
Can anyone tell what can be the problem?
Thanks in advance.
Suresh

thanks a lot dudes
I am using IE 6.0 new version
I Uninstalled and reinstalled the IE Even i am facing same error. In bottom of IE message is like icon followed by "done but with errors on page" if i double clicked that pop up box showing Error
1.object expected in
URL:http://iscsapapp4w:50000/irj/portal
URL:http://iscsapapp4w:50000/irj/servlet/prt/prtroot/pcd
2._htmlbMessageBar is undefined
Anyone help me out what settings i have to do in my IE.
thanks in advance
Regards
Suresh

Similar Messages

Problem in creating iview programmatically

Dear EP friends,
I am trying to create an iView programmatically following the EP help doc.
At the code below
IiViews iViewSrv =(IiViews) PortalRuntime.getRuntimeResources().getService(IiViews.KEY);
i am getting errror recorded at log as
com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:969)
what would be the problem,
i included the required jar i.e. com.sap.portal.ivs.api_iview_api.jar
any idea ??
thanx in advance.
regards
lakshmikantha

Hi Lakshmikantha,
I have seen some implementations that, instead of taking the current user, your component would get a reference t the PCD "service user" and use this user when doing the PCD lookup. This user has access to entire PCD.
The code to get this user is the following:
IUserManagementEngine ume =
    ManagementEngine) PortalRuntime
    .getRuntimeResources()
    .getService(IUserManagementEngine.KEY);
IServiceUserFactory sufactory = ume.getServiceUserFactory();
try {
    serviceUser = sufactory.getServiceUser(username);
} catch (UMException e) {}
You should read the PCD Javadocs, which has some more info (and slightly different method for getting the service user).
NOTE: For many, this is a major security hole.
For more info, check out this thread:
Hope this helps.
Daniel
P.S.: You can just call me Daniel.

Problem in creating iview template in EP7.0

Hi,
I getting the below message even after creating the iview template in EP7.0
"No templates to display. You are not assigned to any existing templates."
Created through:
content Admin --> portal content --> <folder>new --> iview --> seleting "Portal component - create an iView from a portal component contained in a deployed portal archive (PAR file)" <next> --> seleting "com.sap.portal.appintegrator.sap" <next> --> webdynpro <next> --> finish.
Open object for editing...--> Object is a Template to Yes.
Result :
content Admin --> portal content --> <folder>new --> iview --> seleting "iview template- create an iView from an existing iView template" <next> which displays the same message.
"No templates to display. You are not assigned to any existing templates."
Rgrds,
Suri.

Hi,
do have the right permissions? You can check this using the Permission Editor (Applications, PCD)
What role are you assigned to? Content Administrator? System Administrator or even Super Administrator?
Doesthe same error occur when you're logged in as Super Administrator?
br,
Tobias

Problem while creating URL iview (in EP7.0)

Hi,
I encountered a problem while creating URL iview (in EP7.0) as when I selected the iview template for creating the URL iview, the content area got displayed as
"No templates to display. You are not assigned to any existing templates."
please assist me in this regard.
Thanks,
Suri

Hi Manoj,
Thank you for your reply.
I am still getting the same messages even after creating the iview template in EP7.0
Created through:
content Admin --> portal content --> <folder>new --> iview --> seleting "Portal component - create an iView from a portal component contained in a deployed portal archive (PAR file)" <next> --> seleting "com.sap.portal.appintegrator.sap" <next> --> webdynpro <next> --> finish.
Open object for editing...--> Object is a Template to Yes.
Result :
content Admin --> portal content --> <folder>new --> iview --> seleting "iview template- create an iView from an existing iView template" <next> which displays the same message.
"No templates to display. You are not assigned to any existing templates."
Rgrds,
Suri.

Error While Creating Iview?

Hi Everyone,
I Got the error while creating iview in the portal.
Just i went Portal COntent->Folder->New->Iview
500   Internal Server Error
SAP NetWeaver Application Server 7.00/Java AS 7.00
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
The initial exception that caused the request to fail, was:
   java.lang.NoClassDefFoundError
     at com.sap.security.core.server.csi.URLChecker._isValid(URLChecker.java:289)
     at com.sap.security.core.server.csi.URLChecker.isValidURL(URLChecker.java:1202)
     at com.sap.tc.webdynpro.serverimpl.core.url.AbstractURLGenerator.checkURL(AbstractURLGenerator.java:697)
     at com.sap.tc.webdynpro.serverimpl.core.url.AbstractURLGenerator.applyWSRPTemplate(AbstractURLGenerator.java:1235)
     at com.sap.tc.webdynpro.serverimpl.core.url.AbstractURLGenerator.computeWebResourcePath(AbstractURLGenerator.java:945)
     at com.sap.tc.webdynpro.serverimpl.core.url.AbstractURLGenerator.computeWebResourceURL(AbstractURLGenerator.java:1078)
     at com.sap.tc.webdynpro.serverimpl.core.url.AbstractURLGenerator.getWebResourceURL(AbstractURLGenerator.java:223)
     at com.sap.tc.webdynpro.services.sal.url.api.WDURLGenerator.getWebResourceURL(WDURLGenerator.java:377)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:407)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Thanks
Subbarao

Hi Subbarao,
Is this a new installation. Check whether all post installation tasks (like patch upgrade) are completed.
Also try restarting the server.
Regards.
Santhosh

WDRuntimeException error creating iViews pages

Hi All
I´m not sure if this message I can put here but ...
When I´m trying to create iviews on Portal 7.0, I´m having this error message (also occurs when choose User Administration inside portal):
500 Internal Server Error
Web Dynpro Container/SAP J2EE Engine/6.40
Failed to process request. Please contact your system administrator.
Error Summary
While processing the current request, an exception occured which could
not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and
correct the cause of the problem, please contact your
system administrator. To facilitate analysis of the problem, keep a
copy of this error page. Hint: Most browsers allow to
select all content, copy it and then paste it into an empty document
(e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed
to create deployable object 'sap.com/pb' since it is
not a Web Dynpro object.
at
com.sap.tc.webdynpro.serverimpl.core.deployment.AbstractDeployableObject.
(DeployableObject.java:56)
at
com.sap.tc.webdynpro.serverimpl.wdc.deployment.DeployableObjectFactory.getDeployableObject(DeployableObjectFactory.java:95)
at
com.sap.tc.webdynpro.services.sal.deployment.core.DeployableObjectInternal.getDeployableObjectInternal(DeployableObjectIntern
al.java:34)
at
com.sap.tc.webdynpro.clientserver.session.RequestManager.getApplicationDeployableObjectPart(RequestManager.java:380)
... 21 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0008.20060517125535.0000
(release=645_VAL_REL,
buildtime=2006-05-29:19:11:56[UTC], changelist=403424, host=pwdfm101),
build date: Thu Jul 20 17:37:17 PMDT 2006
J2EE Engine 7.00 patchlevel
Java VM Classic VM, version:1.4.2, vendor: IBM Corporation
Operating system AIX, version: 5.3, architecture: ppc64
Session & Other
Session Locale pt_BR
Time of Failure Tue Aug 08 10:36:54 PMDT 2006 (Java Time:
1155040614828)
Web Dynpro Code Generation Infos
Does somebody see something like this error????
Thanks a lot !!!
Daniela Godoi

Thanks Steelman! I appreciate you.
Yes, i have created the System object. (BD1CLNT100)
But when i was following the steps you gave to me in creating the Crystal Enterprise Report :> Folder= (Crystal Report) ->iView->Crystal Enterprise Report> ( iView Name => rptTest/ iView ID => rptTest )Standard Crystal Enterprise Report-->
It is asking for the system, which i selected the system object i created (BD1CLNT100), then it is asking for (Crystal Enterprise Report ID, Application Parameters) and the (Viewer Application Page) is set to default "viewreport.csp"
What should is the (Crystal Enterprise Report ID, Application Parameters) and should i leave (Viewer Application Page) set to default "viewreport.csp"?
Thanks,
Haffiz

How to create iView to run Web Service

Hi,
I need create iView on EP7 NW2004S SP12 portal to run Web Service provided on SRM 6.0 system.
Here is how I have attempted to create the iView:
1. Right click and select New =>iView.
2. Select "iView Template" radio button.
3. Select "Web Service iView" radio button to specify Web Service Template.
4. Enter name and ID of iView.
5. Select System Alias of System defined earlier.
At this point, the portal attempts to connect to the ECC system, and it fails with this error, and I cannot finish the create of the iView.
Could not connect to back-end application. Check your system. The server may be down or there may be an error in a system parameter.
Here are the key parameters defined for the System referenced by the system alias:
WSDL_URL:http://sap2.mycompany.com:50000/SRM-MDM/SRM_MDM
Logon Method:UIDPW
User Mapping Type:admin, user
CodeLink:com.sap.portal.systems.webservices.webservice_system
I've also created a usermapping for the Everyone group, and provided the userid and password for the system alias successfully.
Thanks,
Kevin

Thank you for that information. I had not previously seen a procedure on how to setup an iView to run a web service.
I had created the System just as described in this blog, but I still have a problem. When creating the iView (on the last step of process when I click Finish), the portal attempts to connect to the SRM system, and it fails with the error highlighted below.
Could not connect to back-end application. Check your system. The server may be down or there may be an error in a system parameter.
I get an error in System Administration as well when I test the connectivity for the System object.
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results:
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
How does the security need to be setup to make this work? Or what could be causing this error? I do have SSO configured between the portal and the target system.
Thanks,
Kevin

Cannot create iView from PAR file

I am trying to create an iView from PAR file. But when I select the option,
"Portal component - create an iView from a portal component contained in a deployed portal archive (PAR) file"
and click next, I get the following error.
Error______________________________________
Step 1: Portal Archive Selection
No templates to display. You are not assigned to any existing templates.
I have portal_configurator and developer roles assignmed to myself. Which other role do I need? I cannot get admin role.
Note: Other users with admin roles can create iViews.

Hi
What is your portal version details ?
In EP 7.0 you do not have the option -- New From PAR.
So to create IView from Par, you should select the option New --> IView and then there will be an option to select par file.
Otherwise
1.Check if your par file is deployed on server.
2. Check the portalapp.xml, if you have configured your components properly.
Cheers
Chinmaya
reward for helpful answers

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

Hi Friends,
I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
But i want how to add custom tab in which item details were to be attached.
i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
Thanks a lot in advance.
Thanks
Ravi.
can any one give the solution regarding to the above one.
Edited by: ravikanth on Jul 23, 2008 8:13 AM

Hello Priyanka,
I have the same problem by using Service Ticket in SAP CRM 5.0.
Did you already solved this issue? If so, can you please provide the solution!?
How can I activate and check the transfer log?
Thanks and regards
Alex

Facing problem in creating socket in a method from an already deployed application exe while same method is working from another exe from same environment from same location.

Dll Created In: - MFC VC
6.0
Application Exe Developed In:
- VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit
/ Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component which
has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting Error
code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming on
client side so what we did, we created a driver in C# which invokes same method from same environment(on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest: -
We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not working,
actually it is not executing Create () method,
I will give snippet of the code for understanding the problem because we are not finding any kind solution for it.
Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage ;
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Note: -
CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
return NET_INIT;
ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
if(!AsyncSelect(0))
n_Err = GetLastError();
return NET_INIT;
if(!Connect(strIP,n_Port))
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS","");
return SERVER_NOT_CONNECTED;
Code description: -
From
int GETImage_MT() method we call Initialize() method and pass client machine IP and Port and there we call
ConnectTS() method, In this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System
0
Note: - According to logs, problem is coming in Create method().
Here 0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll
from different exe, it is working fine and we are facing any kind of problem. While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

Pointer variable was already initialized; I have mention in code; kindly assist us.
Dll Created In: - MFC VC 6.0
Application Exe Developed In: - VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit / Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component
which has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting
Error code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming
on client side so what we did, we created a driver in C# which invokes same method from same environment (on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest:
- We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not
working, actually it is not executing Create () method, I will give snippet of the code for understanding
the problem because we are not finding any kind solution for it. Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
                   DWORD errorCode = GetLastError();
                   CString errorMessage ;
                   errorMessage.Format("%lu",errorCode);
                   ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
                   return  IS_ERR_WINDOWS;
Note: - CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
          ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
          if(!Create())
                   ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
          n_Err = GetLastError();
          ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
                  return NET_INIT;
          ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
          if(!AsyncSelect(0))
                   n_Err = GetLastError();
                   return NET_INIT;
          if(!Connect(strIP,n_Port))
                   n_Err = GetLastError();
                   ErrorLog(n_Err,0,"ConnectTS","");
                   return SERVER_NOT_CONNECTED;
Code description: - From int GETImage_MT() method
we call Initialize() method and pass client machine IP and Port and there we call ConnectTS() method, In
this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System  0
Note: - According to logs, problem is coming in Create method(). Here
0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll from different exe, it is working fine and we are facing any kind of problem.
While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

Problem in creating a WebService

hi ... i am having a problem in creating a web service using netbeans .. i am using net beans 6 and glass fish v2 ... when i run the clinet appllication an exception comes that is
javax.xml.ws.WebServiceException: Provider com.sun.xml.ws.spi.ProviderImpl not found
but i have followed right steps ... why this exception is coming ..? plz help.....

Hi
please try recreating the EJB , just check whether the home and remote interfaces and the business methods in the home and bean classes are defined properly .Also check whether the ejb editor is showing all the business methods
hope this helps ,please do ot forget to reward points
regards
rajeshkr

Problem in creating a JDBC System on VC7.1 portal ( CE7.1 SP3)

I have a problem in creating a JDBC System on VC7.1 portal (CE7.1 SP3)
I get the following error:
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Could you please let me know if there are any guides on SAP Library; I was not able to find any documentation nor any threads discussing this on VC7.1
Although, I saw this thread Can Visual Composer talk to/connect to any Database?..
which says that VC7.1 can connect to SAP backend
and web services only, and there is no direct connection to the db.
Help needed please.

Hi Dharmi
Here is a quote of Dafna's post in [another thread in this forum|Re: Copy VC controls]
CE7.1.1 will be released at September 2008 for ramp-up customers.
There are many improvements and new capabilities in the new release of Visual Composer for CE7.1.1. Among the new features you can find:
The missing features from Visual Composer 7.0 (Html view, portal Eventing support (EPCM), JDBC, Undo/Redo, and more..)
Many layout & modeling improvements
Additional ALV table functionality - export to Excel, switch to chart, configure ALV behavior at design time
Integration of Visual Composer in Eclipse - additional entry point to the Visual Composer models from the NWDS. This integration provides the option to add a WD component (in case of missing functionality in Visual Composer), as a black box component to the Visual Composer model. Right-clicking the component will open the Web Dynpro perspective for creating/modifying the component.
Regards,
Shai

Problem in creating a build.xml for weblogic portal application

Team ,
I am facing problem in creating the build.xml using weblogic.BuildXMLGEN tool .
a) Below is the structure of my portal application
SrcCode
--- .metadata (eclipse plugins folder)
--- B2BApp ( Ear Content)
--- b2bPortal ( portal related file(controllers,jsp)
--- b2bsrc (java src)
b) Now I executed below utility to generate the build.xml "
java weblogic.BuildXMLGen -projectName B2BApp -username weblogic -file build.xml -password welcome1 F:\srcCode"
c) Based on the above step , build.xml got generated .
d) when I execute "ant compile" target from the command prompt , I see the below exception
ant compile
Buildfile: build.xml
compile:
+[wlcompile] [JAM] Warning: failed to resolve class AbstractJspBacking+
+[wlcompile] [JAM] Error: unexpected exception thrown:+
+[wlcompile] com.bea.util.jam.internal.javadoc.JavadocParsingException: Parsing failure in F:\b2bNew\b2bPortal\src\portlets\b2b\dmr\Picker\PickerController.java at line 58.+
e) I suspect , the problem is bcoz of classpath issues , as I generated build.xml donot have the references to dependent lib's.As build.xml looks like below :
+<target name="compile" description="Only compiles B2BApp application, no appc">+
+<wlcompile srcdir="${src.dir}" destdir="${dest.dir}">+
++
++
++
+.....+
+....+
Please help me to reslove these issues .
PS: I able to deploy the application using 10.3.2 weblogic workshop ( i.e inbuilt eclipse )

i JaySen ,
thanks for your response. As mentioned we added all the necessary library within the -librarydir but still we see the same error :
+[JAM] Error: unexpected exception thrown:+
com.bea.util.jam.internal.javadoc.JavadocParsingException: Parsing failure in F:\b2bNew\b2bPortal\src\portlets\typeAhead\TypeAheadController.java at line 70. Most likely, an annotation is declared whose type has not been imported.
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.getAnnotationTypeFor(JavadocTigerDelegateImpl_150.java:410)
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.extractAnnotations(JavadocTigerDelegateImpl_150.java:176)
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.extractAnnotations(JavadocTigerDelegateImpl_150.java:152)
at com.bea.util.jam.internal.javadoc.JavadocClassBuilder.addAnnotations(JavadocClassBuilder.java:404)
at com.bea.util.jam.internal.javadoc.JavadocClassBuilder.populate(JavadocClassBuilder.java:359)
===================
a) this is a upgrade project [ upgrading from wlp 8.1.4 to 10.3.2 ]
i.e we are using weblogic portal 10.3.2 version.
b) Searched some sites/forums regarding the above error, and it says something related to "jwsc" ant task [ i.e while compiling a webservice(JWS) ], but we see this error while compiling a normal controller(jpf) class :(
c) we are using "ant compile" target which internally calls wlcompile task , while executing wlcompile this error is thrown .
Help Appreciated
Thx,
Sarat

Problem in creating table maintenance generator for 61 fields in table

Hi Experts,
I am facing problem in creating a table maintenance genarator for a ZTABLE which has 61 fields
i am using below details whicle creating the TMG
in Maintenance screen
i am giving maintenance type as two step
Maint screen no overview screen 2
                          single screen        3
Dialog Data Transport details
Recording routine    standard recording routine
but it is giving following error
screen SAPL<ZTABLE NAME>    0003 could not be generated
In DYNPFIELD_ATTR mandatory field LINE has no value
please let me know how to sort out these errors.
Is there any limit on the number of fields for which we can create table maintenance generetor.
Thanks a lot in advance
Sudipto

Hi Sudipto,
There is not limit to the number of fields of the Table which can be used in TMG for generation. But, from the usability point of view this will horrible.
I created a Z table and added 64 fields and was able to generate the TMG with the screens perfectly. So, I guess there should not be any problem.
Well, have a look at the Function Group. I guess the screen numbers are already used by some other screens. You can set the system to propose freely available screen numbers from the pool.
Also, check whether proper authorization is assigned or not.
And if nothing is working, you can degenerate all the generated screens and then can have a new regeneration of it.
Hope these tips will work.
Thanks,
Samantak

Problem in creating iViews.

Similar Messages

Maybe you are looking for