Problem in Creating Receiver Agreement

Hi,
I had created a namespace in IR and did a simple idoc to file scenario.
In the IR, the MI and MT are not been shown while creating the receiver agreement and receiver determination.
Do let me know what would have been wrong.
I tried entering it manually and it gave error like schema not recognized.
Regards
Krish

Hi,
when u r Doing Idoc to file scenario, sender side u have to use a ABAP business sysytem.
hope u have imported the same in configuration scenario.
in that u have to select u r MI. then onlly it will reflect in the Reciver Determination
Regards,
Madhav
Note: Points If Useful.

Similar Messages

  • Problem in creating Receiver Agreement using Integration Directory API

    Hello Experts,
    We are developing a scenario where we are creating "REceiver Agreement" through Integration Directory API.
    This requires certain parameters like Sender component, Interface, Communication Channel & Namespace to be set in the code.The required Communication Channel & Components already exist in Integration Directory .
    Our concern is that we are not able to retreive this Communication Channel's ID through the code in order to set it as a parameter for Receiver Agreement generation.
    Can anybody pls advice??
    Thanks in advance,
    Suraj.

    Hi Stefan,
    We tried using query on communication channel, but could not do it as we could not get a method which accepts  name of communication channel as parameter.
    We used "CommunicationChannelQueryIn" related methods in the API.
    But still could not retreive the Communication Channel ID of an existing Communication Channel.
    Please help.

  • Problem when creating receiver agreement for File to IDOC scenario

    I have done the following :
    1. Created two business systems one for the file system and other for the R3 system and also I created two communication channel, one as sender communication channel and one as receiver communication channel.
    2. Created the receiver determination
    3. Created the interface determination
    4. Created the sender agrement
    5. Now when I was trying to create the receiver agreement I want to assign the receiver communication channel i have created to the receiver agreement but the F4 help gives me no records and I am thus stuck at this point.
    Please suggest me how to proceed forward from here.

    Hi ,
    <i>5. Now when I was trying to create the receiver agreement I want to assign the receiver communication channel i have created to the receiver agreement but the F4 help gives me no records and I am thus stuck at this point.</i>
    Make sure that your created communication channel for reciever is under the respective reciever business system and give the same while creating the reciver agrement.
    sekhar

  • Integrated Configuration- Problem occurred in receiver agreement for sender

    Hi ,  I am using AAE in PI 7.1  and it is proxy to file scenrios.
    When Ia m doing testing  in Integration Directory in test configuration its giving me this error .
    Problem occurred in receiver agreement for sender -<ECCBUSINESSSYSTEM> to receiver -BS_D_EPS,http://abc.com/sap/pi/HR/Qualifications.Qualifications_Async_Out: No receiver agreement found for , -<ECCBUSINESSSYSTEM> , BS_D_EPS, http://abc.com/sap/pi/HR/Qualifications, Qualifications_Async_Out
    ( here it should take interface  Qualifications_Async_In, but logs says it is pointing to outbound interface)
    here  when I am going in to trace logs  then it seems  that are not able to understand  the   receiver interface . rather then it is taking sender inface in logs..
    In trace logs . I am getting
    Receiver Determination
    <Not found>
    <Trace level="1" type="B">CL_RD_PLSRV-ENTER_PLSRV</Trace>
    <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N </Trace>
    <Trace level="1" type="T"> Cache Content is up to date </Trace>
    <Trace level="2" type="T">Start with given receiver - BS_D_EPS </Trace>
    <Trace level="2" type="T">Using Receiver Determination 00000000000000000000000000000000 </Trace>
    <Trace level="1" type="T">No Relation found - accept given Receivers. </Trace>
    <Trace level="2" type="T">...extracting Receiver from Header: BS_D_EPS </Trace>
    <Trace level="2" type="T">Classic Receiver Determination via Rules. </Trace>
    <Trace level="3" type="T">...create rule engine </Trace>
    <Trace level="2" type="T">No Receiver found behaviour: 0 </Trace>
    <Trace level="2" type="T">Number of Receivers:1 </Trace>
    <Trace level="1" type="E">CL_RD_PLSRV-ENTER_PLSRV</Trace>
    Interface Determination
    <Not found>
    <Trace level="1" type="B">CL_ID_PLSRV-ENTER_PLSRV</Trace>
    <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N </Trace>
    <Trace level="1" type="T"> Cache Content is up to date </Trace>
    <Trace level="1" type="T">...There is no Interface Determination configured for receiver party and receiver service BS_D_EPS </Trace>
    <Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_D_EPS Qualifications_Async_Out </Trace>
    <Trace level="2" type="T">...valid InbIf without Condition: Qualifications_Async_Out </Trace>
    <Trace level="2" type="T">Number of receiving Interfaces:1 </Trace>
    <Trace level="1" type="E">CL_ID_PLSRV-ENTER_PLSRV</Trace>
    Operation Mapping
    <Not found>
    <Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
    <Trace level="2" type="T">......attachment XI_Context not found </Trace>
    <Trace level="3" type="T">Mapping already defined in interface determination </Trace>
    <Trace level="1" type="T">No mapping configured </Trace>
    <Trace level="1" type="E">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace>
    I  have developed the other integrated configuration scenario and this is working fine . 
    please let me know how can I troubleshoot it

    I am using sender as Soap and receiver as File adapter. 
    here  the problem is that  while going for interface deteremination and receiver agreement  it is calling to  Outbound interface .
    It should call the inbound interface. I put all the details correctly and deleted all the objects and crated again for both Ir and Id..
    I put the name of inbound interface  in configuration but while executing its calling outbound interface.

  • Error in AEX Itegrated Configuration Testing "No receiver agreement found."

    Hi,
              I am working on PI 7.3, doing a File to Idoc by using the AEX(Advance Adapter Engine Extended). While doing the configuration testing i am getting the below error "
    Problem occurred in receiver agreement for sender -BC_XXXXXXX to receiver -BS_XX5_100,urn:XXXX.com:POC:MasterData:Article:ECC:Sender.SI_OA_POC: No receiver agreement found for , BC_xxxxx, , BS_xx5_100, urn:xxxx.com:POC:MasterData:Article:ECC:Sender, SI_OA_POC."
            I gone through the SDN but not got usefull links. I tryied to recreating whole scenario, Cache refresh, but no luck. Can you pls let me know where is the problem. Do i need to do any additional configuration other than creating RFC in Java stack for AEX?
    Thanks & Regards,
    Dev

    Hi RK,
            Thanks for your reply.
                  Yes i have created the Idoc_AAE channel and assigned this channel in my Outbound Processing tab.
    What do you mean by java channel in Inbound Processing? My sender is File so i created File channel and assigned in the Inbound processing tab.
    @ Raghu,
                I have created the Receiver channel. I no need to create Receiver agreement because i am using the ICO so if i give the Receiver and Inbound interface details that is enough. And one more thing i am doing testing in ID Test confiuration.
    Thanks ,
    Dev

  • Error : Receiver agreement not found

    Hi all,
    My scenario is RFC to JDBC.
    Its showing the below error, when 'I try to send data through test configuration after configuring ESR and ID part.
    Receiver Agreement
    Runtime error
    Problem occurred in receiver agreement for sender -SAP_BL_ISU to receiver -RFC_To_JDBC_Async_R_SQL_bllmstest,urn:sap-com:document:sap:rfc:functions.ZTEST_TIPS_DOI1: No standard agreement found for , SAP_BL_ISU, , RFC_To_JDBC_Async_R_SQL_bllmstest, urn:sap-com:document:sap:rfc:functions, ZTEST_TIPS_DOI1
    <Trace level="1" type="B">CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV</Trace>
    <Trace level="2" type="T">O U T B O U N D - B I N D I N G </Trace>
    <Trace level="2" type="T"> Cache Content is up to date </Trace>
    <Trace level="2" type="T">determine OUTBOUND BINDING for: </Trace>
    <Trace level="2" type="T">-SAP_BL_ISU </Trace>
    <Trace level="2" type="T">-RFC_To_JDBC_Async_R_SQL_bllmstest </Trace>
    <Trace level="2" type="T">urn:sap-com:document:sap:rfc:functions.ZTEST_TIPS_DOI1 </Trace>
    <Trace level="1" type="T">error with outbound binding. </Trace>
    <Trace level="1" type="T">No standard agreement found for , SAP_BL_ISU, , RFC_To_JDBC_Async_R_SQL_bllmstest, urn:sap-com:document:sap:rfc:functions, ZTEST_TIPS_DOI1 </Trace> <Trace level="1" type="E">CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV</Trace>
    please suggest me...

    Hi,
    This is configuration issue, please check the ESR sender/Receiver interfaces and the associated
    Sender / Receiver agreement and the associated communication channels are configured correctly.
    Try to test the configuration using Test configuration / send a test message from RWB to this interface.
    If the configuration is correct and you are facing the same issue. try to delete the ID configuration and recreate it.
    Before re-creating the configuration, do cache refresh.
    Regards
    Bhargava Krishna

  • Problems in IDOC receiver communication channel

    Hi,
    I am trying to build an interface to get data from 3rd party legacy system using JDBC and post the data into ECC using IDOCS. I have IDOC built in ECC, I am able to import the metadata in IDX2 after creating port in IDX1. But after building the whole interface, I dont see the IDOC receiver communication channel which has to post IDOCS in the ECC 6.0 system.
    Please assist.
    Rgds
    Kishore

    OK in that case, we are getting the following error in the Message monitoring:
    <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_ERROR</SAP:Code>
      <SAP:P1>-BS_AVN_TO_FILE_JDBCSERVER</SAP:P1>
      <SAP:P2>-BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:AdditionalText>
      <SAP:Stack>Problem occurred in receiver agreement for sender -BS_AVN_TO_FILE_JDBCSERVER to receiver -BS_WOAV_IDOC_SENDER,urn:sap-com:document:sap:idoc:messages.ZAVENTITY01.ZENTITY: No standard agreement found for , BS_AVN_TO_FILE_JDBCSERVER, , BS_WOAV_IDOC_SENDER, urn:sap-com:document:sap:idoc:messages, ZAVENTITY01.ZENTITY</SAP:Stack
    Please check and assist.
    Rgds
    Kishore

  • When we will use HEADER MAPPINGS in RECEIVER AGREEMENTS?

    Hi,
    HEADER MAPPINGS appeared when we create RECEIVER AGREEMENTS,So when we will use this option.

    Hi Ramana,
    The header mapping is made available in the receiver agreement. It is required in the IDoc adapter, for example, because the IDoc adapter does not know any communication parties.
    chk this link
    http://help.sap.com/saphelp_nw04/helpdata/en/b2/1f17419b24f06fe10000000a1550b0/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c09b775e-e56e-2910-1187-d8eba09c7a4a
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
    Regrads
    Sampath

  • Why we r not Creating Sender Agreement For HTTP & IDOc Adapter at Sender .

    Hi Buddy's,
                         Why we r not Creating Sender Agreement For HTTP & IDOc Adapter at Sender .And why we create receiver agreements at receiver side bt not sender agreement at sender side.
    Wat Is GLOBAL Container ?, where it will Occur & wat is the functionality of that.

    Kumar,
    1) XI integrattion server - IS expects the messages in XML format. If you see the HTTP request you will see that we pass all the info contained in the Sender areement in the the HTTP request itself , namely - Message interface, message type and the namespace (along with login parameters). For IDOCs the the IDOC- XML are are sent to the IS (through IDOC port configuration at the source system.
    2) When send a message to XI the sender knows that XI system parameters, but when at the reciver end there could be any any system that is reciving the IDOc/HTTTp message. you specify those message through a commumication channel and this channel is associated to a receiver agreement.
    3) A Global container is like a place holder for variables. You can set a variable here and access it throughout your mapping and hence the name.
    A good example for a gloabal container is a counter to countthe number of records in te target side.
    Regards,
    Arvind ravindran

  • Receiver Agreement problem in XI

    Hi,
    The problem is that when the idoc calls adapter in XI, the following error message is thrown(Display XML Message Versions- window, SOAP Header):
    com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=our_sender;TS=our_receiver;AN=WorkCenterMasterData;ANS=our_namespace
         I have checked that the Receiver Agreements are configured right, there should not be problem with that. So what could be the problem? We just updated our XI to SP19, could this affect to idoc processing?

    Hi,
    I have got a couple of times that Receiver agreement not found even though I have receiver agreement. Also I have done some dummy changes and tried out. Also I have stopped and started the receiver communication channel. But it have not worked. Then I have started and stopped the File Adapter but that doesnot worked. I have done all the cache refreshes but the issue is not resolved.
    Then finally just restarted the machine and it worked fine. So there are some caches which is not refreshing when we do the cache refreshes. They are only refereshing when we reboot. Can you also try all these steps and if you dont get success then try to bounce the system and check.
    ---Satish

  • Receiver Agreement Problem

    Hi friends,
    I am  trying to create a Receiver agreement....for that i selected the sender/receiver communication components of ESR(some one created and locked).
    it shows error like
    " Receiver Agreement: testAdapter | Supplier | ProductC | SAT_001 | ProductCReceivingIn is already locked in change list 2fd4e0416cad12dcaf7c001871e5a23a by user xiappluser"
    Best Regards,saran

    Hi,
    <b>If you don't have authorization to see the Admin page in your IB then use the below url:</b>
    Open the browser and enter
    http://<host>:<port>/rep/support/public/<b>LockAdminService</b>
    And delete the locked objects. )
    Regards,
    Sarvesh

  • How to create a test scenario for Extended receiver agreement

    HI, experts,
    I tried to create a test scenario in PI7.1 / Intergration Builder, I already defined 3Operation mapping and 3Message mapping in Enterprise Builder and test good.
    1 Operation mapping is reading input, and output in "ReveiverDetermine" structure.
    other 2 mappings are real mapping program.
    My question is how to create test scenario for it? I know I should create a "Receiver Determine" with "Extended" option, however can anybody point out a good guide with details?
    thanks!

    Hi,
    >>Hence I created 2 MM/OM and one OM/MM (OM3) which uses ReceiverDetermine structure as the target.
    You need to create only one OM (add one source interface and two target interface in this)  and in that use one MM (add source MT and add the 2 receiver MT in the signature tab of the MM )
    >>One bussiness component
    One BC for Source and One for target
    >>One Receiver Determine (set extended option and select the OM 3 ?)
    Yes
    >>One sender aggrement
    Yes
    >>Two or Tree Receiver aggrement
    Two Receiver Agreement
    Also check this wiki page for step-by-step guiide
    https://wiki.sdn.sap.com/wiki/display/SI/StepbyStepguidetoExplainEnhancedReceiver+Determination
    Regards
    Suraj

  • Integration directory problem while creating business service

    HI,
    CURRENTLY I AM FACING A PROBLEM IN INTEGRATION DIRECTORY. WHEN I TRY TO CREATE A BUSINESS SERVICE INSIDE THE SERVICE WITHOUT PARTY WHICH I AM TAKING AS A SENDER, I AM UNABLE TO GET THE SOFTWARE COMPONENT VERSIONS IN THE SENDER PARAMETERS.
    IF ANYONE CAN GIVE THE COMPLETE CONFIGURATION STEPS FOR SENDER AND RECIEVER SYSTEM THAT WILL BE VERY HELPFUL.
    BEST REGARDS,
    MONA

    Hi Mona,
    Let me explain you in detail:-
    First, Activate the Change List in the Integration Repository once the design objects are complete.  By activating the change list, the object becomes available for Configuration in the Integration Directory.
    Secondly, to transfer Integration scenario from Integration Repository - you need your Integration Scenario to be created correctly and when you run this wizard you actually pull the Integration scenario in the Integration directory.
    You also have the option of 'Configuration Wizard'.
    This tool is a wizard for creating your Recevier Determination, Receiver Agreement, Sender Agreement and Interface Determination. For this tool, you do not need the Integration scenario
    It is not mandatory to use any of these tools to configure your scenario.
    All you have to do for configuring your scenario is
    1. Create Business system/Business service
    2. Create Communication Channel
    3. Create Receiver Determination
    4. Create Interface Determination
    5. Sender Agreement
    6. Receiver Agreement
    I hope this provides you a solution.
    Regards.
    Praveen

  • SIGNING problem in soap receiver adapter

    Dear Friends,
    I am sending the file to soap adapter , it reaching to reciever system but I SIGNING is not happening.
    sender side file adapter
    receiver side soap adapter
    sender side ok , reciever side also ok but only the problem is SIGNING.
    receiver side any settings are required.
    Please suggest me how to resolve this issue.
    Regards,
    Shalini Shah

    Hi,
    If you want to sign the message then enable webservice security in receiver communication channel and specify the certficate for signing in the receiver agreement. Certificates need to be created in Visual Admin and corresponding public key should be provided to the partner for validating the signature.
    You need to create a connection type G in SM59 which is required for connecting to J2EE from integration server and you need to specify  this connection in the port which need to be created in tcode lpconfig.
    Regards,
    Prakash

  • Receiver Agreement for Integration Process

    Dear All
    I am facing a strange problem when I am sending a message via proxy to SAP PI whci is  then supposed to forward it to a legacy system.
    I am using a BPM and am getting an error like no receiver agreement found between the sender SAPECC system and receiver integration process

    Hi,
    >>>a BPM and am getting an error like no receiver agreement found between the sender SAPECC system and receiver integration process
    use the integration directory wizard and create two configurations
    - ECC - PI (integration process)
    - PI (BPM) - to the legacy
    then it will work - this is not an error but lack of configuration
    Regards,
    Michal Krawczyk

Maybe you are looking for