Problem in Creating Segments in WE31

When i am creating a Z.. segement it says the segment already exists when i try to change now it says segment not found...
This is in ECC 6 ... please let me know how to resolve this i need these Z segments because i have to add them in my basic idoc type under the parent segment some how i could create the parent segment..... in we31 but i am not able to create child segements.... in we31.....
pls reply

Did you create a data element first (field ).. ?
Also this help.sap link below might be of some use ....
http://help.sap.com/saphelp_46c/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/frameset.htm
Regards
M
Edited by: Manthan_R on Mar 8, 2010 7:45 AM

Similar Messages

Creating segment in IDOC

Hi friends ,
I am new to idoc's. I was trying to create a basic idoc . I went to /we31 transaction and entered the name and the fields .When i try to save . It gives an error message the "data element is not active" .can u please tell how do i activate it so that i can go to next step .
thank you

Hi,
Here is the general steps to create segments. Check the following steps.
Enter transaction WE30 (ALE->Extension-> IDOC types->Maintain Idoc type)
- Type in your name of the extended IDOC type (usually starting with 'Z') and click on the Basic IDoc type, click the create icon.
- Click on Create new and enter a description and press enter.
- Click on ZIDOCTYPE01 and then on the Create icon.
- Enter ZIDOCTYPE as the segment type, click on Segment Editor.
- Enter a description for your segment type and create.
- Enter a description for your segment, enter each field required in your IDoc and press enter to validate.
- Save and generate, press back
- To release the segment choose Goto, Release from the menu.
- Check the box on the line of your segment.
- Save, back and enter.
- Your Idoc type structure should be displayed with your new segment.
- Save and back.
- To release the Idoc type choose Extras, Release type from the menu and Yes.
Thanks,
Naga

IDOC: Program must create segment

Hi experts,
What FM should I use in my program to create/insert a segment in a BASIC TYPE? I used EDI_DOCUMENT_OPEN_FOR_CREATE but it seems not to be working.
Points will be given.
Thanks.

Hi
You can simply create the Segment in WE31 Tcode
or
check the fun module EDT_ALE_CREATE_SEGMENT
Reward points for useful Answers
Regards
Anji

Not to able to create segment

Hi all,
I am trying to create IDOC segment S1ABC in WE31 transaction. But it shows an error that Structure S1ABC exists . But the segment S1ABC does not exist. There is a structure S1ABC in SE11. So it is not allowing me to create . I tried to delete the Structure S1ABC in se11 and its not possible . When i try to create segment S1ABCD from template S1ABC it is allowing me tocreate.
I know that wheneer we create a segment an underlying structure will be creatd in the databasse with the same name . But in my case I wnat to name the Segment also same as that of structure . I dont know how in my system the underlying structure is available but segment is not found
Is it possible to create segment with S1ABC name .

Hi! Arshad,
I have one doubt..I think u r trying to create a custom segment right? if it is so then it should be start with Z/Y..if correct me if I am wrong?
And for structure S1ABC..it is quite possible that SAP using it for some other purpose...not made for idoc segment...
Regards,
Joy.

Warning:EINVAL creating segment of size

Hello!
I have installed the second SAP system (SOLMAN) on the same Unix-host (Solaris 5.10 sparc) and have problem after stopping of SAP to start the SAP system again.
I get the error from Oralce:
ORA-27102: out of memory
SVR4R Error 22: invalid argument
ORA-27101: shared memory realm does not exist
I have checked the sga_max_size value in the file init<SID>.ora:
This parameter is set to the value 2.319.282.339
Through further investigations of alert<SID>.log I got the following information:
Warning:EINVAL creating segment of size
fix shm parameters in /etc/system
After this I edited the file vi /etc/system and added:
set shmmax=4294967295
but nothing is changed.
Can som one help me here?
Thank you very much indeed!
regards
Thom

see also this oracle Note for the recommended settings:
Note:169706.1: Subject: Oracle Database on AIX,HP-UX,Linux,MacOSX,Solaris,Tru64 Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 10.2)
You can get ORA-27102 error message, if the system can't allocate the Oracle SGA in the required size. Maybe your SGA is larger than OS restrictions allow.
Maybe you don't have enough virtual memory, or your SGA is too high, or the swap area of OS is not large enough, etc....That's why you should check the system settings according to the mentioned oracle and sap notes.

Adding data element to segment in we31 in ECC 6.0

hi all,
I have added field name ( data element ) to segment in we31 in 4.6 C by going Edit u2013> cancel release, then F6 to goto change mode to add our field.
Now I have to add the same field ( data element ) to segment While adding it is giving system error as " Error while resetting the release of segment ZE1XXXXXX_01"
Kindly let me know what to do ?
Thanks in advance

Problem solved with the help of my collegue.
It is just using "Segment --> Add version".
As the old version is already released so we can
"Edit --> Cancel release".
Thanks,

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

Apple ID FAQ http://support.apple.com/kb/HE37

Facing some problems in creating a custom tabs in CRMD_ORDER Transaction

Hi Friends,
I am facing some problems in creating a custom tabs in CRMD_ORDER Transaction code in Solution Manager of SAP.
Actually my requirement is adding of two tabs(one is header & another is item tab) in the above Transaction, i was able to put one tab i.e header tab but i was not able to keep item tab. i found a badi CRM_CUSTOMER_I_BADI in which documentation was given & i processed in the same way.
For information i used the Badi CRM_CUSTOMER_H_BADI for header tab which i was able to add the tab & all functions like change, save working Good.
But i want how to add custom tab in which item details were to be attached.
i was done with the necessary SPRO settings(or Tcode CRMV_SSV) & able to see the 2 tabs thats it, but the functionality save is not working for the second tab & not saving in table CRMD_CUSTOMER_I (in this table there is one CI include where we added our item fields).
And also i had a doubt whether to use ALV or Table Control. And if possible can any one can sent me the screen design & the code for the above requirement in detail.
can any one who have knoweldge in Solution Manager & in the above Badi implementation can give me a right solution which will help me a lot.
Thanks a lot in advance.
Thanks
Ravi.
can any one give the solution regarding to the above one.
Edited by: ravikanth on Jul 23, 2008 8:13 AM

Hello Priyanka,
I have the same problem by using Service Ticket in SAP CRM 5.0.
Did you already solved this issue? If so, can you please provide the solution!?
How can I activate and check the transfer log?
Thanks and regards
Alex

Facing problem in creating socket in a method from an already deployed application exe while same method is working from another exe from same environment from same location.

Dll Created In: - MFC VC
6.0
Application Exe Developed In:
- VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit
/ Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component which
has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting Error
code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming on
client side so what we did, we created a driver in C# which invokes same method from same environment(on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest: -
We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not working,
actually it is not executing Create () method,
I will give snippet of the code for understanding the problem because we are not finding any kind solution for it.
Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
DWORD errorCode = GetLastError();
CString errorMessage ;
errorMessage.Format("%lu",errorCode);
ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
return IS_ERR_WINDOWS;
Note: -
CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
if(!Create())
ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
return NET_INIT;
ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
if(!AsyncSelect(0))
n_Err = GetLastError();
return NET_INIT;
if(!Connect(strIP,n_Port))
n_Err = GetLastError();
ErrorLog(n_Err,0,"ConnectTS","");
return SERVER_NOT_CONNECTED;
Code description: -
From
int GETImage_MT() method we call Initialize() method and pass client machine IP and Port and there we call
ConnectTS() method, In this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System
0
Note: - According to logs, problem is coming in Create method().
Here 0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll
from different exe, it is working fine and we are facing any kind of problem. While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

Pointer variable was already initialized; I have mention in code; kindly assist us.
Dll Created In: - MFC VC 6.0
Application Exe Developed In: - VC 6.0, C# and VB.net (Applications which are using dll)
OS: - Windows XP sp2 32bit / Windows Server 2008 64 bit
Problem: - Facing problem in creating socket
in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
Description: - We have product component
which has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting
Error code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
Already Attempt: - Because error is coming
on client side so what we did, we created a driver in C# which invokes same method from same environment (on client machine) using same dll and we are astonished because it worked fine there.
Kindly Suggest:
- We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not
working, actually it is not executing Create () method, I will give snippet of the code for understanding
the problem because we are not finding any kind solution for it. Kindly assist us in understanding and fixing this problem.
Code Snippet: -
Int Initialize (LPTSTR SiteAddress, short PortId)
try
CClientTSSocket *m_pJtsSockto;
m_pJtsSockto = new CClientTSSocket;
LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
catch(...)
                   DWORD errorCode = GetLastError();
                   CString errorMessage ;
                   errorMessage.Format("%lu",errorCode);
                   ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
                   return  IS_ERR_WINDOWS;
Note: - CClientTSSocket extends CAsyncSocket
IS_ERR_WINDOWS is a macro error code which value I found 7.
LONG ConnectTS(CString strIP, UINT n_Port)
          ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
          if(!Create())
                   ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
          n_Err = GetLastError();
          ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
                  return NET_INIT;
          ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
          if(!AsyncSelect(0))
                   n_Err = GetLastError();
                   return NET_INIT;
          if(!Connect(strIP,n_Port))
                   n_Err = GetLastError();
                   ErrorLog(n_Err,0,"ConnectTS","");
                   return SERVER_NOT_CONNECTED;
Code description: - From int GETImage_MT() method
we call Initialize() method and pass client machine IP and Port and there we call ConnectTS() method, In
this method we Create() method and finally it returns the error code as mention in macro 7.
Logs after running the program: -
--------ConnectTS has been called ------------
ConnectTS is calling Create [is going to call]
Image System  0
Note: - According to logs, problem is coming in Create method(). Here
0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll from different exe, it is working fine and we are facing any kind of problem.
While same problem application was working properly earlier but now continuously it showing problem.
Kindly assist us to resolve the issue.

Problem in creating a WebService

hi ... i am having a problem in creating a web service using netbeans .. i am using net beans 6 and glass fish v2 ... when i run the clinet appllication an exception comes that is
javax.xml.ws.WebServiceException: Provider com.sun.xml.ws.spi.ProviderImpl not found
but i have followed right steps ... why this exception is coming ..? plz help.....

Hi
please try recreating the EJB , just check whether the home and remote interfaces and the business methods in the home and bean classes are defined properly .Also check whether the ejb editor is showing all the business methods
hope this helps ,please do ot forget to reward points
regards
rajeshkr

Problem in creating a JDBC System on VC7.1 portal ( CE7.1 SP3)

I have a problem in creating a JDBC System on VC7.1 portal (CE7.1 SP3)
I get the following error:
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Could you please let me know if there are any guides on SAP Library; I was not able to find any documentation nor any threads discussing this on VC7.1
Although, I saw this thread Can Visual Composer talk to/connect to any Database?..
which says that VC7.1 can connect to SAP backend
and web services only, and there is no direct connection to the db.
Help needed please.

Hi Dharmi
Here is a quote of Dafna's post in [another thread in this forum|Re: Copy VC controls]
CE7.1.1 will be released at September 2008 for ramp-up customers.
There are many improvements and new capabilities in the new release of Visual Composer for CE7.1.1. Among the new features you can find:
The missing features from Visual Composer 7.0 (Html view, portal Eventing support (EPCM), JDBC, Undo/Redo, and more..)
Many layout & modeling improvements
Additional ALV table functionality - export to Excel, switch to chart, configure ALV behavior at design time
Integration of Visual Composer in Eclipse - additional entry point to the Visual Composer models from the NWDS. This integration provides the option to add a WD component (in case of missing functionality in Visual Composer), as a black box component to the Visual Composer model. Right-clicking the component will open the Web Dynpro perspective for creating/modifying the component.
Regards,
Shai

Problem in creating a build.xml for weblogic portal application

Team ,
I am facing problem in creating the build.xml using weblogic.BuildXMLGEN tool .
a) Below is the structure of my portal application
SrcCode
--- .metadata (eclipse plugins folder)
--- B2BApp ( Ear Content)
--- b2bPortal ( portal related file(controllers,jsp)
--- b2bsrc (java src)
b) Now I executed below utility to generate the build.xml "
java weblogic.BuildXMLGen -projectName B2BApp -username weblogic -file build.xml -password welcome1 F:\srcCode"
c) Based on the above step , build.xml got generated .
d) when I execute "ant compile" target from the command prompt , I see the below exception
ant compile
Buildfile: build.xml
compile:
+[wlcompile] [JAM] Warning: failed to resolve class AbstractJspBacking+
+[wlcompile] [JAM] Error: unexpected exception thrown:+
+[wlcompile] com.bea.util.jam.internal.javadoc.JavadocParsingException: Parsing failure in F:\b2bNew\b2bPortal\src\portlets\b2b\dmr\Picker\PickerController.java at line 58.+
e) I suspect , the problem is bcoz of classpath issues , as I generated build.xml donot have the references to dependent lib's.As build.xml looks like below :
+<target name="compile" description="Only compiles B2BApp application, no appc">+
+<wlcompile srcdir="${src.dir}" destdir="${dest.dir}">+
++
++
++
+.....+
+....+
Please help me to reslove these issues .
PS: I able to deploy the application using 10.3.2 weblogic workshop ( i.e inbuilt eclipse )

i JaySen ,
thanks for your response. As mentioned we added all the necessary library within the -librarydir but still we see the same error :
+[JAM] Error: unexpected exception thrown:+
com.bea.util.jam.internal.javadoc.JavadocParsingException: Parsing failure in F:\b2bNew\b2bPortal\src\portlets\typeAhead\TypeAheadController.java at line 70. Most likely, an annotation is declared whose type has not been imported.
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.getAnnotationTypeFor(JavadocTigerDelegateImpl_150.java:410)
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.extractAnnotations(JavadocTigerDelegateImpl_150.java:176)
at com.bea.util.jam.internal.javadoc.JavadocTigerDelegateImpl_150.extractAnnotations(JavadocTigerDelegateImpl_150.java:152)
at com.bea.util.jam.internal.javadoc.JavadocClassBuilder.addAnnotations(JavadocClassBuilder.java:404)
at com.bea.util.jam.internal.javadoc.JavadocClassBuilder.populate(JavadocClassBuilder.java:359)
===================
a) this is a upgrade project [ upgrading from wlp 8.1.4 to 10.3.2 ]
i.e we are using weblogic portal 10.3.2 version.
b) Searched some sites/forums regarding the above error, and it says something related to "jwsc" ant task [ i.e while compiling a webservice(JWS) ], but we see this error while compiling a normal controller(jpf) class :(
c) we are using "ant compile" target which internally calls wlcompile task , while executing wlcompile this error is thrown .
Help Appreciated
Thx,
Sarat

Problem in creating table maintenance generator for 61 fields in table

Hi Experts,
I am facing problem in creating a table maintenance genarator for a ZTABLE which has 61 fields
i am using below details whicle creating the TMG
in Maintenance screen
i am giving maintenance type as two step
Maint screen no overview screen 2
 single screen 3
Dialog Data Transport details
Recording routine standard recording routine
but it is giving following error
screen SAPL<ZTABLE NAME> 0003 could not be generated
In DYNPFIELD_ATTR mandatory field LINE has no value
please let me know how to sort out these errors.
Is there any limit on the number of fields for which we can create table maintenance generetor.
Thanks a lot in advance
Sudipto

Hi Sudipto,
There is not limit to the number of fields of the Table which can be used in TMG for generation. But, from the usability point of view this will horrible.
I created a Z table and added 64 fields and was able to generate the TMG with the screens perfectly. So, I guess there should not be any problem.
Well, have a look at the Function Group. I guess the screen numbers are already used by some other screens. You can set the system to propose freely available screen numbers from the pool.
Also, check whether proper authorization is assigned or not.
And if nothing is working, you can degenerate all the generated screens and then can have a new regeneration of it.
Hope these tips will work.
Thanks,
Samantak

Problem in Creating Check boxes as a column in a table using MVC

I am trying to display a table format using the Model view controlers, with 1st column as a checkbox. if the user chooses some check boxes and submit the screen then i need to update the information in a custome table.
I am having a problem in creating the check boxes, also pls tell me how to catch the line items checked by the user in the table...
Sri

HI Srinivas
 I am not getting what the exact problem is.....
I am giving you a work around.....to me it does not seems to be an Ideal Solution..But Probably it will solve your problem....
Changes To be Made in Page Layout...
In Pagelayout
<htmlb:tableView id = "tvX" width = "100%" visibleRowCount = "8" fillUpEmptyRows = "X" selectedRowIndexTable = "<%= selectedRowIndexTable %>"
selectedrowindex = "<%= selectedrowindex %>"
onrowselection = "select"
selectionMode = "MULTISELECT" table = "<%= sflight %>" />
selectedindexrow is an attribute of type INT4
In Do handle event.....instead of using the previous code use this one...
if event->id = 'SUBMIT'.
DATA: WA TYPE INT4.
LOOP AT SELECTEDROWINDEXTABLE INTO WA.
*Here you can read your table of TABLEVIEW with index *equal to WA into a workarea and then use that workarea *to update the customer table ENDLOOP.
elseif event->id = 'tvX'.
tv ?= CL_HTMLB_MANAGER=>GET_DATA( request = request name = 'tableView' id = 'tvX' ).
IF tv IS NOT INITIAL.
table_event = tv->data.
selectedRowIndex = table_event->SELECTEDROWINDEX.
append selectedrowindex into SELECTEDROWINDEXTABLE.
endif.
ENDIF.
Meanwhile..Let me check why that code does not work.....
Hope it solve your problem....
Cheers:)
Mithlesh

I have a problem in creating a Process Chain(PC).

Hi GURU's
I have a problem in creating a Process Chain(PC). The PC should run on first 3 business days of the month for six times i,e 6am, 7am,8am, 9am,10am,11am.
For this i have created 3 PC like BD1, BD2, BD3, and i selected the Factory calender provided workday 1, 2 , 3 and time for three chains.
Now should i schedule it for 6times in a day.
I tried creating a new job for one of PC's but i have to change the timings for every month (this is not the proper solution).
Please help me.
Regds
Lajwanth

Hi Friend,
For the days part, you can create a new factory calendar with first 3 business days of each month only as working days.
Then in the scheduling -> Restrictions; you can mention that Factory Calendar id and select radio button for "Move job to next working day". Schedule the chain as Periodic "Hourly".
Then for the Time part -> You can insert process type "Decision between multiple alternatives" after the start variant.
After you insert this process type you can create a formula in it to check for system time. In the if condition check for system time i.e., whether it is between 6 - 11. If only the system time is between 6 AM to 11 AM only then the decision step would turn to green and go to the successor step in the process chain.
Process chain would be like:
Start variant -> Decision Step -> Rest of the chain.
So in short the factory calendar will take care of which days the chain will run and decision step will take care of the timings.
Regards
Hemant Khemani

Problem in Creating Segments in WE31

Similar Messages

Maybe you are looking for