Problem in creating small box in sap script

Hi,
I am working on a sap script in which iwant to create a small on the right hand side of the footer of the script and also want to display the data in that box.
plzzz provide me guidelines how to solve this problem.

u can use the BOX command.
The BOX command draws a box as per the specifications. The x , y co-ordinates are for the upper left corner with reference to the values in the position command. The Position command is used to set x,y coordinates with respect to the start position.
plz chk this link:
how to display Lines and Boxes in SAP Script

Similar Messages

How to create a box in sap script n footer

Hi,
I am working on a Sap Script in which i have to display a box having the decision of crt profile and i don't know how to display it. It is clear that it is to be displayed in the footer of it and the code for that decision is coming from the program.
plzz provide me guidelines as how to solve this problem.

To draw a box, try this syntax.
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
example:
/: BOX FRAME 10 TW XPOS '11.21' MM YPOS '14.18' MM INTENSITY 100.
/: POSITION XORIGIN '11.21' MM YORIGIN '5.13' MM.
/: SIZE HEIGHT '120' MM WIDTH '90' MM.
Regards,
Joan

Problem printing box in sap script

i am printing the main window in a box in sap script, the box is appearing on page one but it does not seem to appear on the later pages, how do i get it to appear on all the pages? is there any setting that i'm missing?

Hi,
Can you elobrate your question.
if your question is like this.
-> You have only one page you are displaying the data in that box and that data is exceeding the main window and printing in
the second page and you are not getting the BOX in the second page .
a) If it is your question check whether there is any if condition
before the BOX command like
/: if &page& = 1.
/: BOX height 5 ln width 50 ch
/: Endif.
remove the if condition there.
or
/E ele1.
/: BOX height 5 ln width 50 ch
place the Box statement in the first line of that window.
-> You have two pages .
a) If it is so check wheter the box command is there in both
pages.
Thanks,
NN.

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to display Lines and Boxes in SAP Script

hi,
Can any one help me how to display Lines and Boxes in SAP Script.
Regards
kiran

The SAP printer drivers based on page-oriented printers use these commands when creating output whereas the line printers and non-supported page-oriented printers ignore these commands.
Syntax:/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
This command draws a box of the specified size at the specified position.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH determines the width of the box.
Default: WIDTH value of the SIZE command.
HEIGHT determines height of the box.
Default: HEIGHT value of the SIZE command.
FRAME determines the thickness of frame.
Default: 0 (no frame).
INTENSITY determines the box contents as a grayscale percentage.
Default: 100 (full black)
The other details I guess is provided by friends who have posted before me.
Regards,
K.Sibi

How to create a hypertext in SAP script

Hi All,
I want to create a hypertext in SAP script.I read 'Creating hypertext in SAP script' posted on www.sdn.sap.com, but I am not able to get desired output.Kindly suggest the soloution.
Regards,
Pranjali Silimkar

Hi,
I read the document 'Creating hypertext in SAP script' posted on the link 'http://wiki.sdn.sap.com/wiki/display/ABAP/CreatingHypertextinSAPScripts', but I am not able to get the desired output.It is displaying the same text again on the same page which is not the desired output.Kindly suggest me some solution.
Regards,
Pranjali Silimkar

HOW TO CREATE A VARIABLE IN SAP SCRIPT

HI ALL,
CAN ANYONE TELL ME HOW TO CREATE A VARIABLE IN SAP SCRIPT.
THANK YOU,
BYE
TAKE CARE.

Hi Ravi,
You can use like this
A text in the editor contains the following DEFINE commands:
/: DEFINE &mysymbol& = 'xxx xxx xxxxx xxxx'
&mysymbol&
/: DEFINE &mysymbol& = 'yyyyy yyy yyyy'
/ &mysymbol&
The printed text appears

How to increase size of check box in sap script

Hi All,
I need to include check box in sap script. I included check box using insert>character->sap symbols. I cant able to view check box in print preview but i can able to get check box in print out.Size of check box printed in the paper is not having enough size. I need to increase size of the check box. Give me suggestion for increasing size of check box.
Regards,
Peranandam

Chk the link.
http://help.sap.com/saphelp_47x200/helpdata/en/d1/80318f454211d189710000e8322d00/frameset.htm

Create new window in SAP Script

Dear All
   how to create new window in sap script
Regards
Suresh
Edited by: Alvaro Tejada Galindo on Apr 9, 2008 11:58 AM

Hi,
To create a new window in scripts.
1. After opening the form in SE71   Click on Windows push button.
    it will gives a screen list of windows in a page
2. Click on Edit option in menu bar in Edit-->Create Element click it will gives a popup window in the window give Name of the window and short description press enter like that you can create windows in a page
3. Click on Page windows it will gives a screen where that window you want to place in that page.    Click on Edit option on menu bar Edit-->Create Element
it will gives a list of windows which your created in a page   here you have to select which window you want to place. Double click on that window it will adds on the page and give the bottom of the screen you can find standard attributes block
there you have to give the position of the window in a page.
or
Click on setting option on menu bar settings-->form painter
it will gives a GUI editor here you can drag the window position it is easy to use.
then you can see the layout.
Thanks
Ganesh

Creating Box in Sap Scripts

HI Gurus,
I am working on Check Printing. My issue is that I want to create a box frame for the Check amount window.
My Windoys attributes are :
LEFT MARGIN     : 14.90 cm
UPPER MARGIN : 22.20 cm
WINDOW WIDTH : 3.90 cm
WINDOW HEIGHT: 1.15 cm
I want a box frame to be created for the particular window , just like we outline the window in Smartfom.
How should I wirite the box Command?
If possible please wrte the code as I am new to scripts.
Thanks in advance.
Regards,
Asish Dash

Hi,
/:           POSITION WINDOW
/:           POSITION XORIGIN '-0.5' CH YORIGIN '-0.25' LN
/:           SIZE WIDTH '0.5' CH HEIGHT '0.25' LN
/:           BOX FRAME 10 TW
/:           BOX HEIGHT '1.7' LN INTENSITY 15
I guess this will resolve your problem

How to create table in the sap script

Hi,
How to create a table in the sap script layout, i Have to use table in the main window with 7 columns. can any one send sample code.
How to calculate the number of line items which are displaying in the main window, if the number of line items are exceed in the main window then the amount has to be calculate and print as "BALANCE FORWARD" and the next page had to be displayed as "CARRY FORWARD" that amount. if this is the last page not subsequent page the amount had to be calculated the carry forward amount and total amount and print as "TOTAL AMOUNT". i am creating the new layout and the program is the standrad driver program i have to use and i have to use the standard Text elements only, can any one help me on this issue

hi
good
there is no "pattern" option in SAPscript. All you have at your disposal are the following SAPscript commands: BOX, POSITION and SIZE. Not only are these commands both confusing and tedious to implement, they also are limited in what they can achieve. For instance, although you can suppress a box during printout (by making it conditional), there is no simple way to adjust it dynamically instead. Thus, to divide sequential line items, you may wish to use an underline (ULINE) or simply white space.
thanks
mrutyun

How to print those check boxes in SAP scripts?

Hi experts,
I have to create sap script form in which i have to create check boxes and at run time according to some condition i have to
check those check boxes.how this can be done?
Thanks in advance
Rohit

Check out the below related threads
check box
Re: check box in script
Regards,
Santosh

Problems while uploading company logo into sap script

Hi Experts,
When i am inserting company logo into sap scripts, i successfully uploaded, but the problem is i am getting black and white image instead of color,but in RSTXLDMC i am giving parameter as BCOL only, could anybody help to get my problem resolved. it is very urgent. The logo which i am inserting is colored.
bye
M.Rajendra Singh

HI
GOOD
How to Upload graphics (IMAGE) to your Sapscript?
Command in your Sapscript
/: INCLUDE Z_YOUR_LOGO OBJECT TEXT ID ST LANGUAGE E
These are the steps to be followed for uploading graphics in R/3 system
1.   First save the file as BMP
2.   Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
      make it Zoom as 100% and save as *.TIFF
3.   Open SE38 and execute program RSTXLDMC
4.   Give your TIFF file path name
5.   Select Bcol (for Color)
6.   TEXT ID will be ZHEX-MACRO-*.
7.   Inplace of * write your own logo name (ZCOMPANYLOGO)
8.   Execute the program
9.   Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
or
In 4.6x :-
1. Goto SE71 Change the mode to GRAPHICAL
2. Choose the Graph Tabstrips
3. Now type in some name for the LOGO WINDOW
4. Press the IMPORT BUTTON and then IMPORT the BMP file from your DESKTOP
5. The code will be written automatically. You just need to drag and drop wherever you want
     the graphics to be.
Please note that in 4.6c onwards, you can also used Windows Bitmap file ( .BMP).
THANKS
MRUTYUN

How to create new page in SAP Script?

Moved to correct forum by moderator. Duplicate deleted. Do NOT post the same question in two forums.
Hello friends,
I am modifying one SAP script.
It is already contains 2 pages. FIRST and NEXT.
All I have to do is to create one more page which should be display as last page.
And this last page should display some data.
I tried and created a new page in SE71 but when i execute the program, it doesn't show newly created (LAST) page.
Please guide me.
REgards,
RH
Edited by: Matt on Nov 7, 2008 4:26 PM

Hi
U need to force the call of this new page.
I suppose your sapscript is arrange with 2 page: FIRST and NEXT, where FIRST has NEXT as next page.
So the system automatically print the pages FIRST and NEXT: u need to insert the statament:
/: NEW-PAGE LAST
in the MAIN window.
U can create a text element NEW_PAGE and you'll call it as soon as you've finished to print the main data:
/E NEW_PAGE
/: NEW-PAGE LAST
U can use the fm CONTROL_FORM
Max

Problem in Creating Check boxes as a column in a table using MVC

I am trying to display a table format using the Model view controlers, with 1st column as a checkbox. if the user chooses some check boxes and submit the screen then i need to update the information in a custome table.
I am having a problem in creating the check boxes, also pls tell me how to catch the line items checked by the user in the table...
Sri

HI Srinivas
   I am not getting what the exact problem is.....
I am giving you a work around.....to me it does not seems to be an Ideal Solution..But Probably it will solve your problem....
Changes To be Made in Page Layout...
In Pagelayout
<htmlb:tableView id   = "tvX"                           width                 = "100%"                           visibleRowCount       = "8"                           fillUpEmptyRows       = "X"                         selectedRowIndexTable = "<%= selectedRowIndexTable %>"
<b>selectedrowindex      = "<%= selectedrowindex %>"
onrowselection        = "select"</b>
selectionMode   = "MULTISELECT"                           table                 = "<%= sflight %>" />
<b>selectedindexrow is an attribute of type INT4</b>
In Do handle event.....instead of using the previous code use this one...
if event->id = 'SUBMIT'.
DATA:      WA TYPE INT4.
LOOP AT SELECTEDROWINDEXTABLE INTO WA.
*Here you can read your table of TABLEVIEW with index *equal to WA into a workarea and then use that workarea *to update the customer table      ENDLOOP.
elseif event->id = 'tvX'.
tv ?= CL_HTMLB_MANAGER=>GET_DATA( request = request                                      name    = 'tableView'                                      id      = 'tvX' ).
IF tv IS NOT INITIAL.
table_event = tv->data.
selectedRowIndex = table_event->SELECTEDROWINDEX.
append selectedrowindex into SELECTEDROWINDEXTABLE.
endif.
ENDIF.
Meanwhile..Let me check why that code does not work.....
Hope it solve your problem....
Cheers:)
Mithlesh

Problem in creating small box in sap script

Similar Messages

Maybe you are looking for