Problem in creation an "Experience Definition"

Hi all.
After instaling collaboration and studio, I tried to create an Experience Definition but this error appears:
Error
Error - An unexpected error occurred when trying to start the Editor.

Any idea what problem is this ?

The problem is the underscore in your server name. While it's a valid server name to most systems, Plumtree can't handle it.
I would suggest creating a host file entry on your portal server with a different name (without any hyphens or underscores) pointing to that server's IP address. Then just use that in your config entry instead of the real server name.
HTH,
Chris Bucchere | bdg | [email protected] | www.bdg-online.com

Similar Messages

URL mapping config for Experience Definition rule

Hello,
I have a question regarding the configuration of url mappings for experience definitions. Here is our scenario:
We have 2 experience definitions that allow us to localize the guest user experience when a user hits the portal for the first time. We need to setup 2 rules that are based on url so that if a user comes from one url they get the English definition and the other url gives the French definition.
This portal will be access by outside users and we cannot have two different domain or sub-domain names in order to differentiate the 2 urls. We’ve been told that it is possible to setup a system so that 2 different context url can resolve to the actual portal url so that the portal sees the different url values and serves up the proper experience def.
So basically I am asking for a somewhat detailed explanation of how to configure it so we have one of the following 2 setups (whichever one is possible):
English url = http://www.domain.ca/portal/en/server.pt
French url = http://www.domain.ca/portal/fr/server.pt
OR
English url = http://www.domain.ca/portal/en.pt
French url = http://www.domain.ca/portal/fr.pt
And both of these urls would map to the same portal at http://www.domain.ca/portal/server.pt (not directly accessible from outside)
We have the portal deployed via Websphere 6.1 on AIX and using IBM HTTP server.
Any help regarding how to configure app server, web server, portal would be greatly appreciated.
Thank you
Richard

Hi Doevelaar,
sorry, no help but: Iam fighting like you.
I tried the same to get multiple databases to live: no result
I tried to get a connection to configure apex-listener running under Glassfish via SQL-Developer: no Connection possible
I tried to get a connection to configue apex-listener via SQL-Developer : this works if Apex-Listener runs standalone but: I can't store the configuration
I am surely a Oracle-fan with APEX and the DBMS but all installations of Oracle makes me mad.
Try to install the dbms 3 times, it will react 3 times different.
The clone tool of db's works one day, the next one it stops anywhere without any online comment (anywhere in hidden logs you will find a miracle error description.. java-errors self explaining if you know all libaries)
I dont know who ever makes quality checks there but they need any old guy, not the young hackers.
I think Bill Gates has time.
I am so frustrated with all this installation stuff and sh..., i hope one day microsoft buys Oracle, then the installation may be smooth and all features will work.
And you dont have to be a script guru to manage an update, may be. This is naturally only a daydream...
I work like you at this problem, if I have any solution I let you know.
Cheers
me

Experience Definitions - Change during a user's session

I'm attempting to change a user's experience definition during their session and I would like the new experience to appear during their session.
I am removing their ID from a default group via the server API, so now they hit the second experience definition rule. I would like to redirect them to their new experience and have them land on the default community. My issue is that that experience seems to be cached and I have to log them out and in manually before the new experience shows up. Any ideas of how I can do this programmatically?
Think of this like changing to a new skin on a website and not having the user log in and out for it to take affect.
Thanks!

Could you please share the API that you have and you are using to add/remove default group?
I have a problem where I have multiple groups/Experice Definitions assign to that user and I was wondering how could a select a default.

Experience definition bugs

I migrated the portal from ALUI 6.1 to WCI 10.3.0.
After the migration, all the existing Experience definitions works well, but when I create a new Experience definition, and I login as a user who is part of the Administrative Folder associated with the experience definition the portal displays 2 lines for the banner saying "Welcome,...My Account,...", and also displays 2 menus, one I selected for the Exp definition, and one blue, with orizontal tabs, which looks like the default portal menu.
Anyone experiencing this bug?
Thanks!
Val

Hi Val,
The current default behavior for creating new my pages uses Adaptive Layouts: "Default Portlet Layout".
So, When you select create "my page", it is recommended that you use the "Classic Layouts", not the adaptive layout.
It not a actual problem unless you mix adaptive layouts and Classic Layouts, where you may see goofy behavior.
You should either subscribe to "classic" or "adaptive layouts".
Unfortunately, there currently is not a way not to set a configurable default layout.
Cheers!
RichardL

Problem in creation of Customer Master

Hi gurus,
I am facing problem in creation of customer master.
I have created a account group zz01 copying from 0001.which has internal no. assignement for the customer.
Now i am trying to create a customer master, at partner functions level under sales area data... the system is asking for the no. for each partner functions.. when i tried to manually enter, the system is not taking any number nor it is letting me save the data.
Please help me out in acertaining, what could be the issue.
regards
Gupta
[email protected]

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

Problem in creation of SOAP massage

hi
I am using JDeveloper (version 11.0) to create the proxy classes from WSDL
but i am getting an exception as following
SOAPFaultException
this exception indicate that there is some problem in creation of SOAP massage internally
so can anyone help me to know what is the problem?
If u want to see the code then i can display here.
thanks in advance

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

Problem in creation of STO(stock transport order)

hi all SAP gurus,
i am facing the problem in creation of stock transport order with ME21N code. i m getting the error msg of "Not possible to determine shipping data for material in STO "
i have checked the stock transport order setup in customization. but not getting the clear idea to come out from this problem.
if anybody have the idea of " how to do the customization of stock transport order setup, pls. let me explain.
thnx in advance.
rgrds,
rajesh

Hi Rajesh,
when ur creating STO with UB doc type, then you have to maintain material in both the plants.
Regarding the error which is comming for you, you have to check the settings at
SPRO- IMG- MM-Purchasing-Set up stock transport order- Assign delivery type & Checking rule
here for document type UB and your supplying plant-XXXX select nothing for Dlv type(delivery type) and chr - 01 and after this save.
After this you create STO as you are doing and see what the system is prompting.
For any further clarification let me know.
Regards,
NJ

Problem in creation of HUs through FM HU_REPACK and HU_POST

Hi Experts
This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
I am sending two Unique Sources HUs with single destination HU for the same material and batch into HU_REPACK and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
Please find the example of the HU created in the system
0 10020000038479 S-DISP 1 EA S DISPNSARY
1 0024632192 000004 810062 0.250 KG L0533A4172 Lactose
1 0024632192 000004 810062 24.900 KG L0533A4172 Lactose
Material is 810062
Batch is L0533A4172
Can you please assist me how to acheive single line item HU when we are trying to repack the data for same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

Hi Sailaja,
I have similar requirements like this before with HU_PACKING_AND_UNPACKING FM. It was a tough debugging before I came up with the right solution. Unfortunately, I was not able to document that code..
But here is what I have been doing.
Youre on track with the solution below, never use BDC as it will only limit the Handling units that you wish to put into.
The function modules that starts with V5_ plays important role as you need to initialize the global variables and table of this function group with values before calling HU_PACKING_AND_UNPACKING FM
Debug inside the Function module, and look for the FM that returns SY-SUBRC <> 0 then set a breakpoint.
Restart the program then debug inside that FM again (and I do not want to go further on the details, I give you the presumption of literacy)
You will find some items that has no value, try to initialize everything by utilizing the FM for this function group V51S.
Happy Debugging.

Problem in Creation of Handling Units through HU_REPACK and HU_POST FM

Hi Experts
        This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
I am sending two Unique Sources HUs with single destination HU for the same material and batch into HU_REPACK and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
Please find the example of the HU created in the system
    0     10020000038479     S-DISP     1     EA          S DISPNSARY
    1     0024632192 000004     810062     0.250     KG     L0533A4172     Lactose
    1     0024632192 000004     810062     24.900     KG     L0533A4172     Lactose
Material is 810062
Batch    is L0533A4172
Can you please assist me how to acheive single line item HU when we are trying to repack the data for same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

*

Problem in creation of any purchasing doc against plant 0001

Hi MM Experts,
I am facing problem in creation of any purchasing doc (i.e: PR or PO) against plant 0001.This is available in the system and assigned to company code. I can create Material master with this plant 0001 and copy to create new plant. But Can't create any pur doc? also in plant list in pur doc showing the rest of the plant except plant 0001.
I m working on ECC 6.0.
Regards,

Dear Sairam/Steve,
I got solution for my problem. The problem is that address number not maintained for 0001 plant.This solution available from the following note. please go thro...
Note 433997 introduced a new logic for the F4 help for plants.
solution proposed in note 433997 :
To maintain the address number of a plant subsequently, startTransaction OX10 for the affected plant ('Change plants') view. Click the 'Address' pushbutton (envelope) or (shiftF5). In the subsequent screen ('Change address'), press Enter or click the 'Copy' pushbutton and save using the 'Save' pushbutton (disk) or (CtrlS).
Then the plant should have an address number and should also be displayed in the search help.
Thank you all
Regards,

Problem in creation of order relevant - intercompany invoice

Dear all ,
I am facing problem in creation of intercompany invoice which is sales order relevant . Please tell which settings is required to resolve this as all the settings has been made.
Send ur email id so that the problem can be described if required....
Thanks .........

Hi,
while creating inter company sales order give the delivering plant in the overview screen. so that enables the system and tells that that is inter company sales order . u can verify whether the system takes which sales order whether it is standard order or inter company? by going to the conditions in the item overview in that u can find the "pi01" or "pi02" and select the delivery details there u can find the delivering plant which is supplying plant and the shipping point of the supplying plant..
in case of doubt u can mail me at [email protected]
Reward if Helpful..
Regards,
Praveen Kumar.D

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Problem with Creation of TemSe file...

HI Experts...
Here im facing the problem with creation of # 3 rd Quarters
Temse file.when ever i use the tcode pc00_m40_f24 and entering the details of quater 3 ...here im showing up the ABAP Runtime error."""Overflow for arthimitic operation Type P in program HINCF240"".
What could be done to overcome the problem.Please advice.
Regards,
V Sai.

Hi experts/Sriram...
Thanks for the reply.
The -
>showing the line....
QS80_TAB-DEDMT=QS80_TAB-DEDMT+S80-DEDMT
Where should we change to get rid of this runtime error.
Here in my quality everthing is fine and we have uploaded patches in quality upto recent one sp80.But in prod. the patchlevel is sp71.Will it be the reason.
Please advice me on this as i have to complete the issue of F16.
Thanks and Regards,
V Sai.

Creation of project definition and wbs element

I want creation of project definition and wbs element upto 4 level using bapis.
i am using transaction cj27,cj01,cj02
which function module to use for this??

Hi,
to create project definition with customer fields the BAPI you should use is : BAPI_BUS2001_CREATE
to create WBS elements with different levels and specific fields the BAPI you should use is BAPI_BUS2054_CREATE_MULTI
these bapi must be used in the sequence of call :
BAPI_PS_INITIALIZATION
BAPI_BUS2001_CREATE / BAPI_BUS2054_CREATE_MULTI
BAPI_PS_PRECOMMIT
BAPI_TRANSACTION_COMMIT
before using the bapi, you must apply OSS note :
637345 - Syntax error with enhanced PS tables
i sent you the oss note to your mail
please reward points if helpfull.

What technology that can be used for the creation of Need Definition?

Being on SAP SRM 4.0, we currently have a requirement for creation of Need Definition( Basically a build up for the contract ). Need being collected from the Backend systems need to be validated and approved by Buyers & Lead Buyers in the SRM system.
Technically, this task is broken down to below tasks.
1) Creation of need definition screen - Basically a template where a need can be created with Items, Sub Items and other related information
2) Selection Screen for Buyers and Lead Buyers - This enables the the Buyers to select the Need Definition assigned to them based on the status.
3) Report - List of all the Need Definition( Item and Sub Item)satisfying the selection of step 2. with the possibility to navigate to the Need Definition screen ( Step 1) upon selection.
Now the question is,
what technology is recommended for the above Tasks? We thought it would be BSP but do you guys have any suggestions...
Do we have any issues in displaying the report in BSP? please let me know
Remember we are version 4.0 of SRM.
Thanks in Advance..
Mohan.

You can use conditional styles to address specific browser issues (this is more than likely the markup you noticed).
Here's a good guide:
http://www.quirksmode.org/css/condcom.html

Problem in creation an "Experience Definition"

Similar Messages

Maybe you are looking for