Problem in creation of Accrual Object

Hello Gurus...
Am unable to do the recording for transaction ACACTREE01.
Basically, we have a tabstrip and these tab are getting recorded but in each tab we need to add a record and in that record, data should be given.
Say, in this tcode, we can see tabs like Item data, Parameters and Account Assigmnet. In Item data tab, we need to click on Create button to create a record and once this record is created then only we need to give the data in that record. The same applies to other 2 tabs also.
Main problem is recording is unable to capture the creation of record and the data which is inputed.
So, could you let me know how to do this recording or is there any alternative method for it.

Hi,
  I think you should check if the authorty object that you are using has been created you can try to use transaction su21, i think the authority object that you are trying to use does not exist.
Check the below link for more info
LINK[ Auth Objects |http://help.sap.com/saphelp_nw04/helpdata/EN/80/1a6859e07211d2acb80000e829fbfe/content.htm]
Regards,
Himanshu

Similar Messages

  • Problem during creation of authority object

    Hi All,
    I am trying to do authority object of standart report RFASLDPC but when I am giving authorization object in authorization object field (Bcoz requirment is this transaction code for perticular company code)then it is following error/warning 'check object has not been maintained.'
    Could you please tell me what is the remedy for that?
    Regards,
    Amar.

    Hi,
      I think you should check if the authorty object that you are using has been created you can try to use transaction su21, i think the authority object that you are trying to use does not exist.
    Check the below link for more info
    LINK[ Auth Objects |http://help.sap.com/saphelp_nw04/helpdata/EN/80/1a6859e07211d2acb80000e829fbfe/content.htm]
    Regards,
    Himanshu

  • Problem in creation of system alias for bw system

    Hi,
    I want to create system alias for the bw system
    system admin->sys Config->system landscape->portal content->my own folder
    for this folder i created the system object
    after creation of system object, from property category i select the connector and give the details.
    after that i select the user management and give
    authentication ticket - select
    Logon method- UIDPW
    User Management type- admin,user
    i saved till now
    in the display object i select the system alias
    then that screen displays
    In the system alias screen, i clicked on add button for adding alias then we r getting this message.
    User Mapping Status:  (Not ready for user mapping configuration)
    Please give the solution for solving this problem
    Regards,
    Sid.
    Edited by: sid m on Mar 11, 2008 12:15 PM

    Hi Krishna,
    I checked  the connection settings.
    WAS settings in system object is giving this mistake
    before user mapping it works fine.
    after giving usermapping i ma getting this exception.
    SAP Web AS Connection
      Test Details:
    The test consists of the following steps:
    1. Check the validity of the system ID in the system object
    2. Check whether the system can be retrieved
    3. Check whether a SAP system is defined in the system object
    4. Validate the following parameters: WAS protocol; WAS host name
    5. Check HTTP/S connectivity to the defined backend application
      Results
    1. The system ID is valid
    2. Retrieval of the system was successful
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (172.19.18.75)
    5. HTTP/S connection failed
    for testing the connector i am getting this exception
    Test Connection with Connector
      Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
      Results
    Retrieval of default alias successful
    Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
    Regards,
    Sid.

  • Creation of login object failed

    Hi all,
    I've got a problem with the mobile client development.
    We are using the mobile client for many years and we even develop a lot with it, but now i have a problem never seen.
    After extending a bDoc and start testing the application, after the generation and login, system states "Creation of login object failed".
    So i did a full generation. Result the same.
    I debugged the ValidateLogin class and found out, that in the following statement is failing
           BOLOGIN = BusinessRootObject.BusinessFactory.LoadBusinessObject("LOGIN", determineUser)
    BOLOGIN is Nothing at the end. I tried out to create the Object via        BOLOGIN = BusinessRootObject.BusinessFactory.CreateBusinessObject("LOGIN")
    same result. Next i tried to create the BOACTIVITY and it failed as well. One day before everything was fine, even with changing business documents.
    The error in the VB.ERR object says:
    -     err     {Microsoft.VisualBasic.ErrObject}     Microsoft.VisualBasic.ErrObject
         Description     "In der Methode BusinessFactoryCore.LoadBusinessObject ist eine System-Exception aufgetreten"     String
         Erl     0     Integer
         HelpContext     0     Integer
         HelpFile     ""     String
         LastDllError     3     Integer
         Number     5     Integer
         Source     "MTBLLFW"     String
    Can anybody please give a hint.
    We are using CRM 5.0 SP7 and MSA SP7 on MS 2003 Server with local repository. DB is SQL2000.
    Yesterday i was releasing a changelist and now its no longer working at all, what a mess.
    Thanks to all,
    Andreas Rose

    Hi Andreas,
    The problem may be incorrect or corrupt ARSREP.DAT file.
    The reason may be that the BDOCs are not synched from MAS. Once you sync this through MAS you will find the *.bdoc files at the location
    mentioned under the registry key HKLM\SOFTWARE\SAP\MSA\MW\TL\BDocPath
    Usually this would be default as C:\Program Files\SAP\Mobile\tpsfiles.
    After this when you generate the BusinessLibrary the Arsrep.dat file
    will have the *.bdocs incorporated in the Arsrep.dat file.
    Hope this helps.
    Regards, Gervase
    ps. For synching the BDocs refer to SAP Note 942942

  • Error creating accrual object in Mannual Accrual

    Hello Gurus,
    I am trying to create Accrual Object in Manual Accruals. After entering all the required data i entered "Check and Simulate " tab and i am getting the error message as follows:
    *Error in document: ACE $2 D6B510PCC*
    *Message no. RW609*
    *Diagnosis*
    *Errors occurred when checking or posting the document*
    *Reference type = ACE*
    *Reference key  = $2*
    *Logical system = D6B510PCC*
    *You can find the errors in the log.*
    *System Response*
    *The document cannot be posted.*
    *Procedure*
    *Remove the error in the document and create and post the document again.*
    I am not able to depict what the error is. I have looked at the customizing, it looks fine to me..but i guess i am missing something. Can somebody helps me with this. Any assistance is rewarded,
    Thanks
    Prakash

    Hello,
    I'm with same problem.
    The message occurs only for objects created last year and before, when trying to post this year.
    Thanks

  • Mass changing for accrual object assignments part of the field profit_ctr

    Hi Experts,
    Does any one know about mass changing for accrual object assignments part of the field profit_ctr (profit center).
    How can we do this?
    Best Regarts.

    Hi,
    I have equal problem. How did you save him?
    Regards,Irena

  • Problem in  creation of Customer Master

    Hi gurus,
    I am facing problem in creation of customer master.
    I have created a account group zz01 copying from 0001.which has internal no. assignement for the customer.
    Now i am trying to create a customer master, at partner functions level under sales area data...  the system is asking for the no. for each partner functions.. when i tried to manually enter, the system is not taking any number nor it is letting me save the data.
    Please help me out in acertaining,  what could be the issue.
    regards
    Gupta
    [email protected]

    its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
    path to check the number range is as below :
    spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---    
    at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
    and some times  u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
    rewards if solved ..
      thank you
    madhan

  • Problem in creation of SOAP massage

    hi
    I am using JDeveloper (version 11.0) to create the proxy classes from WSDL
    but i am getting an exception as following
    SOAPFaultException
    this exception indicate that there is some problem in creation of SOAP massage internally
    so can anyone help me to know what is the problem?
    If u want to see the code then i can display here.
    thanks in advance

    its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
    path to check the number range is as below :
    spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---    
    at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
    and some times  u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
    rewards if solved ..
      thank you
    madhan

  • Problem in creation of STO(stock transport order)

    hi all SAP gurus,
    i am facing the problem in creation of stock transport order with ME21N code. i m getting the error msg of "Not possible to determine shipping data for material in STO "
    i have checked the stock transport order setup in customization. but not getting the clear idea to come out from this problem.
    if anybody have the idea of " how to do the customization of stock transport order setup, pls. let me explain.
    thnx in advance.
    rgrds,
    rajesh

    Hi Rajesh,
    when ur creating STO with UB doc type, then you have to maintain material in both the plants.
    Regarding the error which is comming for you, you have to check the settings at
    SPRO- IMG- MM-Purchasing-Set up stock transport order- Assign delivery type & Checking rule
    here for document type UB and your supplying plant-XXXX select nothing for Dlv type(delivery type) and chr - 01 and after this save.
    After this you create STO as you are doing and see what the system is prompting.
    For any further clarification let me know.
    Regards,
    NJ

  • Problem in creation of HUs through FM HU_REPACK and HU_POST

    Hi Experts
    This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
    I am sending two Unique Sources HUs with single destination HU for the same material and batch into HU_REPACK and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
    Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
    Please find the example of the HU created in the system
    0 10020000038479 S-DISP 1 EA S DISPNSARY
    1 0024632192 000004 810062 0.250 KG L0533A4172 Lactose
    1 0024632192 000004 810062 24.900 KG L0533A4172 Lactose
    Material is 810062
    Batch is L0533A4172
    Can you please assist me how to acheive single line item HU when we are trying to repack the data for same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

    Hi Sailaja,
    I have similar requirements like this before with HU_PACKING_AND_UNPACKING FM. It was a tough debugging before I came up with the right solution. Unfortunately, I was not able to document that code..
    But here is what I have been doing.
    Youre on track with the solution below, never use BDC as it will only limit the Handling units that you wish to put into.
    The function modules that starts with V5_ plays important role as you need to initialize the global variables and table of this function group with values before calling HU_PACKING_AND_UNPACKING FM
    Debug inside the Function module, and look for the FM that returns SY-SUBRC <> 0 then set a breakpoint.
    Restart the program then debug inside that FM again (and I do not want to go further on the details, I give you the presumption of literacy)
    You will find some items that has no value, try to initialize everything by utilizing the FM for this function group V51S.
    Happy Debugging.

  • Problem in Creation of Handling Units through HU_REPACK and HU_POST FM

    Hi Experts
            This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
    I am sending two Unique Sources HUs  with single destination HU for the same material and batch into HU_REPACK  and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
      Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
    Please find the example of the HU created in the system
        0     10020000038479     S-DISP     1     EA          S DISPNSARY
        1     0024632192 000004     810062     0.250     KG     L0533A4172     Lactose
        1     0024632192 000004     810062     24.900     KG     L0533A4172     Lactose
    Material is 810062
    Batch    is L0533A4172
    Can you please assist me how to acheive single line item HU  when we are trying to repack the data for  same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

    *

  • Problem in  creation of any purchasing doc  against plant 0001

    Hi MM Experts,
    I am facing problem in creation of any purchasing doc (i.e: PR or PO) against plant 0001.This is available in the system and assigned to company code. I can create Material master with this plant 0001 and copy to create new plant. But Can't create any pur doc? also in plant list in pur doc showing the rest of the plant except plant 0001.
    I m working on ECC 6.0.
    Regards,

    Dear Sairam/Steve,
    I got solution for my problem. The problem is that address number not maintained for 0001 plant.This solution available from the following note. please go thro...
    Note 433997 introduced a new logic for the F4 help for plants.
    solution proposed in note 433997 :
    To maintain the address number of a plant subsequently, startTransaction OX10 for the affected plant ('Change plants') view. Click the 'Address' pushbutton (envelope) or (shiftF5). In the subsequent screen ('Change address'), press Enter or click the 'Copy' pushbutton and save using the 'Save' pushbutton (disk) or (CtrlS).
    Then the plant should have an address number and should also be displayed in the search help.
    Thank you all
    Regards,

  • Problem in creation of order relevant - intercompany invoice

    Dear all ,
    I am facing problem in creation of intercompany invoice which is sales order relevant . Please tell which settings is required to resolve this as all the settings has been made.
    Send ur email id so that the problem can be described if required....
    Thanks .........

    Hi,
    while creating inter company sales order give the delivering plant in the overview screen. so that enables the system and tells that that is inter company sales order . u can verify whether the system takes which sales order whether it is standard order or inter company? by going to the conditions in the item overview in that u can find the "pi01" or "pi02" and select the delivery details there u can find the delivering plant which is supplying plant and the shipping point of the supplying plant..
    in case of doubt u can mail me at [email protected]
    Reward if Helpful..
    Regards,
    Praveen Kumar.D

  • Problems with creation of catalogue XPGrpwise and temporary

    Problems with creation of catalogue XPGrpwise and temporary files.
    I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
    Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
    Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

    Cvetaev,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Problem with Creation of TemSe file...

    HI Experts...
    Here im facing the problem with creation of # 3 rd Quarters
    Temse file.when ever i use the tcode pc00_m40_f24 and entering the details of quater 3 ...here im showing up the ABAP Runtime error."""Overflow for arthimitic operation Type P in program  HINCF240"".
    What could be done to overcome the problem.Please advice.
    Regards,
    V Sai.

    Hi experts/Sriram...
    Thanks for the reply.
    The -
    >showing the line....
            QS80_TAB-DEDMT=QS80_TAB-DEDMT+S80-DEDMT
    Where should we change to get rid of this runtime error.
    Here in my quality everthing is fine and we have uploaded patches in quality upto recent one sp80.But in prod. the patchlevel is sp71.Will it be the reason.
    Please advice me on this as i have to complete the issue of F16.
    Thanks and Regards,
    V Sai.

Maybe you are looking for