PROBLEM IN CREATION OF FIELD REFERENCE UNDER LOGISTICS GENERAL,T-CODE- OMS9

Dear cons
In t-code- oms9 I created a new field reference xxx just copied from existing field reference ROH.In ROH field reference one indicator WHERE USED LIST is availble. When we click on that whereused indicator all the material types are assigned.But In new field reference XXX If we click on where used list the system gives one information that "The field reference xxx is referenced nowhere". How can I set the where used list like Field reference ROH.Pl. give some solution.
nrk

Hi
Y do u need the Where Used List for ur new material type.? This tab 'Where Used List' indicates that "ROH' has been used as a Reference for creating other material types. That is ROH is the field reference for other material types like u have created. But in ur case, the new material type is not used by anyone as the Field reference. So it is not coming for the new one. If u reference ur new material type for creating another new material type, then the Where used list will be coming.
So it is not must that Where used list must be coming for all,.
Hope u get the solution . ..
Regards
Siva

Similar Messages

Problem for creation of PO for different company code

I have problem for creation of PO using ME21 for different company code.Order is not created.
Please give reply it is urgent.

Hi Mansih,
I don´t understand what is your exact problem, as I don´t see any company code being specified. But maybe you should check in XK03 that the vendor master data is created for this company code/purchasing organisation!
Have a nice day!

No "Context Root field" found under General tab

The J2EE 1.4 Beta2 tutorial on using the deploytool says,
For example, to set the context root of the hello1
application with deploytool:
Select the hello1 WAR.
Select the General tab.
In the Context Root field, enter /hello1.
But there is no "Context Root" field. Under the General tab the only fields are WAR Location, WAR Display Name, and Contents.
Any suggestions?
Thanks.

Well, I guess I had to switch to a screen resolution larger than 800x600 to see the Context Root field way down the bottom.
Somewhere it should be spelled out that Deploytool won't work right in screen resolution of 800x600 or less.
Thanks.

Problem Regarding Creation of Compound field

Hi all,
I have a problem regarding creation of a compound source field.
My source field is say for eg. SF1 and SF2
Destination Field is a look up flat field say LF which has 2 display fields D1 and D2
I mapped SF1 to D1 and SF2 to D2
But when i right click at source and select 'Create compound field' for SF1 and SF2, the compound field is not created automatically.
Can anyone give me a hint as to why is this happening?
Regards,
Roshani

Hi Roshani,
Just check for couple of other things, like
1) I hope its not a qualified table and none of those fields are qualified.
2) None of the fields are ther currently in the matching set in the next tab.
3) You didnt map the main filed (look up table filed, which is there as a sub-table name)
4) There are no more display fields for that table.
I hope it should be one of the above issues. please check for them.
Cheers,
Cherry.

Problem in creation of Customer Master

Hi gurus,
I am facing problem in creation of customer master.
I have created a account group zz01 copying from 0001.which has internal no. assignement for the customer.
Now i am trying to create a customer master, at partner functions level under sales area data... the system is asking for the no. for each partner functions.. when i tried to manually enter, the system is not taking any number nor it is letting me save the data.
Please help me out in acertaining, what could be the issue.
regards
Gupta
[email protected]

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

Restriction of RFQ creation without PR reference

Dear all,
I want to restrict the RFQ creation without PR reference for certain document type in RFQ say AN.How to do that???
Regards,
Atanu

Hi,
Creation of RFQ without any reference is standard functionality. So restricting it without reference of PR is quite tricky.
I can suggest you to use field selection key.
For example, as standard for document type AN, SAP uses field selection key ANA. You copy this key and create your own new key. In this key you can find field 'PR' under field selection group 'Reference data. item'. Mark this field as required entry. Assign your new key to document type.
Please try this out and let me know how it worked.
Regards,
Sameer

OMS2 TRANSACTION-GENERAL DATA-FIELDS REFERENCE

Hi,
could some help me on bettter understanding of the
"Field reference" in General data of article type.
        i understand that with field reference we can control various fields of the material master. now my dought is where should i define this field refeence.
     let's say i want to hide the field purchasing price in material how can i do this hiding by using this field reference??

Check out the path...
Ref IMG--> Logistics General --> Materia Master -->
Configuring the Material Master....
1. Define Structure for Data Screens....
Here, you define some fields, under groups....
   (Eg., Material Unit of measures.. like, order unit, issue unit
   etc.,)
2. Field Selection......(click the field selction screen, and Click on Details..., you can see the numbers(these are groups).
3. You assign this Field Selection ( mandatory/hide/display) to your plant,......in the next step
Based on the step 2, you can deside whether the input is optional / display / mandatory / hide..........
Hopes clear.............

Problem in creation of SOAP massage

hi
I am using JDeveloper (version 11.0) to create the proxy classes from WSDL
but i am getting an exception as following
SOAPFaultException
this exception indicate that there is some problem in creation of SOAP massage internally
so can anyone help me to know what is the problem?
If u want to see the code then i can display here.
thanks in advance

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

Problem with reading Dynpro fields

Hi,
I have some tabstrips. On each tabstrip, I have a
container for an ALV and on the bottom I have another
subscreen for some input fields.
Under the subscreen I have some buttons to insert, delete
etc...
The fields in my subscreen I have bound to DDIC table
fields and I have defined that in my program under TABLES
in my declaration.
So when I write something in the fields, their content
has been written to my table-structure defined in TABLES.
If you double click on a line in the alv, the content of
the line has been written to my dynpro fields in the
subscreen.
My problem now is:
When You have double clicked a line and the content was
filled in my dynpro fields and I change the values after-
wards, I do not have the changed field content in my
TABLES structure. It´s because, the framework isn´t
processing my PBO of the subscreen.
How can I call the pbo manually to get the new field
content, when I´m pressing the button on the parent
dynpro?
I hope it´s possible to understand my problem!
Cheers Arne

Hi again,
I have tried both functions Dynpro_field_get and read_values, but I´m not getting any content. With dynpro_field_get, I´m getting the fieldnames, but not the values!
I have seen, when I´m pressing enter, after I have typed in the new field values, my TABLES structure has been updated. But I think, it´s not very user friendly, if You have to pay attention to press enter before pressing the "add" button...
Any other idea? Or do You know why I´m not getting any content?
Cheers Arne
Message was edited by: Arne Hein

PO Collaboration : Invoice Creation Type field

Hello,
The Invoice Creation Type field in the SNC Web UI is always "Invoice Creation not allowed" irrespective of the settings to the Master Data / Transaction Data.
Given below are the settings I ve maintained
ECC System:
PO -> Item Details -> Invoice Tab:
Inv. Receipt Indicator - Checked
GR-Bsd IV - Checked / Unchecked
SNC System:
Vaildation Checks - Tried both these settings:
1. PO_INVOICE_CREATION - Active
    PO_INVOICE_DATA_ASSIGN - Active
    PO_INVOICE_RELATED_TO_PO_OR_ASN - Inactive
2. PO_INVOICE_CREATION - Inactive
    PO_INVOICE_DATA_ASSIGN - Active
    PO_INVOICE_RELATED_TO_PO_OR_ASN - Active
Infact, I am not able to see the Invoice tab itself in the PO details screen in SNC Web UI.
Note : I am using the Orders.Orders05 Idoc for sending the PO from ECC to SNC system.

Hi Bharath
Your settings are fine
Please do the following checks
If you use IDocs of type ORDERS.ORDER05, SAP SNC can instead read the data for these fields from a reference document, such as a contract, that has previously been transferred via the Core Interface (CIF).
In your PO you would have referenced a contract/agreement, Please check whether it is CIFed or not
Also before CIFING do implement these notes
1053121 & 828912
Now when you send the ORDERS idoc, The RON xml reads this data and puts in structure
<FollowUpInvoice>
<RequirementCode>01</RequirementCode>
<GoodsReceiptBasedInvoiceIndicator>TRUE</GoodsReceiptBasedInvoiceIndicator>
<CustomerSelfBillingIndicator>FALSE</CustomerSelfBillingIndicator>
<ProductTaxationCharacteristicsCode>V1</ProductTaxationCharacteristicsCode>
</FollowUpInvoice>
Irrespective, whether you create invoice for ASN or PO, the tab should be visible as Nikhil rightly mentioned
In SAP SNC , Controlling Invoice Creation for POs is done by FollowUpRequirementCode as mentioned above
Now since you are using ORDERS, you need to check you SA or Contract in Item Details Tab
the following fields need to be checked "IR" in both cases and In Header Details Field "Invoicing Party"
Also during creation of PO, make sure you dont check Unlimited Overdelivery in item delivery tab and even in your reference document.
Now after implementing above two notes reCIF and try creating PO, It will work
Please do mention whether you are able to see the above structure in your RON xml in SCM side and what details???
Best Regards
Vinod

Ad hoc query text field reference

Hi all,
Faily new to all this and wonder if you have any insight on the following:
In ad hoc query I'm adding additional fields to a functional area. They subsequently show up in SQ02 in the left hand pane tree structure for that functional area.
Now, if I double click on one of the additional fields the most central pane shows the details of this field. One of the boxes in there called 'References' contains a field 'Text field' that associates a long text with the code that the field contains.
As a made-up example: the add. field could be Personnel Area, value "XY01", and it is associated with a field Personnel Area Long Text that contains "Xeta Yoyo Regional Office". This is the association shown in 'References' -> 'Text Field'.
My problem is that this 'Text field' field seems to be populated automatically, that is there is some kind of automatic link between the field and the foreign field that contains its associated long text. Also it's greyed out so un-editable.
Does anyone know where this relationship comes from? Does anyone know how to be able to edit this 'Text field' field?
Grateful for help,
Richie

Ok, I'll try to be a bit clearer.
For infosets in Ad Hoc Query, a field has an option to be related to another, different field that provides the long text version of this. Example: field P1000-OTYPE 'object type' is related to T7770-OTEXT 'object type text'.
This relationship is displayed for each infoset additional field: right click on the add. field -> display/change definition, text identification -> 'Determine LIKE reference using text field' in the pop up window.
Problem is this text field is <b>always</b> greyed out and uneditable. So the question was, how do you set this yourself?
Hope this clarifies stuff, thanks for any help,
Richie

Functional Module for changing the field Reference Key 2 in Tcode FB02

HI,
I have a one requirement to change a field Reference Key2 (XREF2) in transaction FB02. This field appears in FB02 during (refer steps below):
u2022 In Initial screen after entering the Document Number, Company code & Fiscal Year then click on u201CEnteru201D
u2022 In next screen double click on u201CAccount u201C
u2022 In next screen click on u201CAdditional Datau201D. We will get a pop-up window where the field Reference Key2 (XREF2) is there.
We want to change this value of this field. Kindly let me know any Function Module available for this or any other suggestion.
Regards
Naga

I don't know any such BAPI/FM (alas, many threads already) so i suggest you to use SHDB to build a batch input. FI_ITEMS_MASS_CHANGE should not solve your problem.
Regards

Problem hiding a text field

Hi,
For some reason I am unable to hide a text field by clicking on a button. This is what I'm doing:
txtField.presence = "hidden";
I'm using javascript and I can hide other buttons if I set their presence to "invisible", but I cannot hide a text field at all. Am I missing something here?
Thanks,
Chad

Make sure the reference path to your text field is relative to the button's location on the hierrachy tree. The way you have it, I assume the button and the text field is under the same parent container or level.

Problem having the cloumn fields in the heading(REP:1317)

Hi
I am having a problem having a column field in the Header.I followed the instructions in the help i.e creating a field and then referencing it with a boiler text(&<field name>).But When I run the report I get the error message
"REP-1317: Boilerplate '<boilerplate name>' references field with source '<column name>' at wrong frequency."
How do I set these two field in the same frequency.
Can anybody help.
Thanks

Hi
See my answer at YOUR topic "Unable to have the column fields in the header".
Once more: the only way to solve the problem is to create in the Header the Repeating Frame linking with the group of "<field name>". Then it's possible to place Field to be referenced by "database_col" or boiler text such as "&<field name>".
Andrew.

List of Spro T Codes under Materials Mangement & Logistics General

Hi,
Can u please help me in geeting list of T codes in SPRO under Materials Mangement & Logistics General nodes only.
Regards,
Abhijit

Hi
To get the IMG tcodes go to table TSTC and give input in the Tcode field O* then you will get the most of the tcodes.
OR
Go to IMG >Addtional information menu > Select Display Key>then select Attributes
you will get the additional information in all the IMG nodes. Take the last four letters that will be thr tcode for the particular node. You can get all the tcode except the node which is not accessible thru tcode
Hope it helps
Thanks/karthi

PROBLEM IN CREATION OF FIELD REFERENCE UNDER LOGISTICS GENERAL,T-CODE- OMS9

Similar Messages

Maybe you are looking for