Problem in creation of G/L account using FSP0
Hi experts,
I am creating G/L accounts using the transaction FSP0 . The LSMW is working fine till the reading of data and displaying it. But when it comes to conversion of data it is going to dump.
Could any please let me know the reason for it.
Thanks and regards,
Ramkishore.
Hi Ram,
Try below BAPIs instead of LSMW...
<b>BAPI_ACC_DOCUMENT_POST
BAPI_ACC_GL_POSTING_POST
</b>
Reward points if it is useful
Thanks & Regards
ilesh 24x7
Similar Messages
-
Problem with creation of dbadapter in jdeveloper using only jndi
Hi,
I´m new in this forum and first would like thank for the opportunity.
My problem is that have an application where i need to create a dbadapter for to connect a database.
I´m using bpel.
Would like known if there is a way of to make this without creating a local dbconnection in my project. I´m want to use only jndi that is in my Aplication Server.
For example : At the moment of creation of dbadapter, the wizard give me a dbconnection and below the jndi, is not possible i to create this connector using only the JNDI?
Thanks.Hi,
Try using Open Data Set file for output to load in to application server.
The GUI_DOWNLOAD only gets the data to the presentation server,.
I think you are expecting the file in AS running GUI_Download gets only to Presentation Server.
Thanks & Regards,
Vishnu -
Problems setting up Tiscali e-mail account using W...
Hi All
New to this - my first post so apologies if I'm asking the obvious!
I used to be with Tiscali as service provider and continue to use my Tiscali e-mail addy and check it on Tiscali webmail page.
Tonight I decided to set it up on Windows Mail. Can receive my e-mails but cannot send. I'm getting this error message -
Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Subject 'Re: xxx', Account: 'home', Server: 'smtp.tiscali.co.uk', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10053, Error Number: 0x800CCC0F
I know Tiscali is having a few problems at the mo but I can send using the webmail page.
I have a feeling I am having trouble since I changed to BT as my provider as months back, before I changed, I seem to remember it being ok?
Can anyone tell me if I need to amend the server details? Currently using pop.tiscali.co.uk as incoming and smtp.tiscali.co.uk as outgoing?
Thanks in advance
Cheerscamperfan wrote:
Hi All
New to this - my first post so apologies if I'm asking the obvious!
I used to be with Tiscali as service provider and continue to use my Tiscali e-mail addy and check it on Tiscali webmail page.
Tonight I decided to set it up on Windows Mail. Can receive my e-mails but cannot send. I'm getting this error message -
Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Subject 'Re: xxx', Account: 'home', Server: 'smtp.tiscali.co.uk', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10053, Error Number: 0x800CCC0F
I know Tiscali is having a few problems at the mo but I can send using the webmail page.
I have a feeling I am having trouble since I changed to BT as my provider as months back, before I changed, I seem to remember it being ok?
Can anyone tell me if I need to amend the server details? Currently using pop.tiscali.co.uk as incoming and smtp.tiscali.co.uk as outgoing?
Thanks in advance
Cheers
Hi.
In order to send emails "from" your Tiscali email address (whilst it's still working) you need to alter the smtp server to mail.btinternet.com. Receiving is fine as you've noticed.
You will then almost certainly get a 553 error message (address verification), in which case pop along to my shortcuts option 0e.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures -
Home directory creation for local user accounts using powershell
Through Computer Management when I create a user, a home directory is created for the same user in the folder C:\Users.I am creating a user through powershell in a remote machine.I am using the following script to create user
$comp = [ADSI]'WinNT://localhost,computer';
$user = $comp.Create('User', 'account7');
$user.SetPassword('Welcome1');
$user.SetInfo();
The account is getting created. But no home directory is created for this user. How to create a home directory for a user using powershell? Also the user created through GUI is a member of the group 'Users' by default. How to add the user created to the
'Users' Group.Hi Cmm user,
Thanks for your posting.
To set the attribute of homedirectory for a user in powershell, please also try the cmdlet set-aduser:
import-module activedirectory
$HomeDrive=’Z:’
$UserRoot=’\\CONTOSO-FPS\Users$\’
$HomeDirectory=$UserRoot+$AccountName
SET-ADUSER $AccountName –HomeDrive $HomeDrive –HomeDirectory $HomeDirectory
I hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Problem with creating a new Siebel account using Web Service and ADF
Problem solved.
Edited by: noah.fang on Mar 15, 2011 3:45 PM<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by phil housley ([email protected]):
<HR></BLOCKQUOTE>
sorry this is first time I tried to reply on this group
The USER is SYSTEM and there is no real password when first installed. However you do need to type something in the password field . This can be anything if you have not added a password.
Phil
null -
I cannot send mail from 1 of my iCloud accounts using mac mail- smtp problem
Slightly strange problem today with smtp server. For some reason timing out on po4 on one of my accounts. Another account uses po2 and is working fine. If I log in to icloud I can send messages so problem appears to be in configuration of mac mail. I have not changed anything, I can receive mail. When trying to change smtp I cannot edit the smtp box or if i do it reverts to what it was previously. Any suggestions ?
Whoops have jus seen this thread which looks like it is a more widespread problem than just me
http://discussions.apple.com/message/25443290 -
I am unable to send emails using mail from my btinternet and yahoo accounts similar problem to others with mobile me accounts on lion any suggestions?
Do I need to delete all my email accounts and start again?
-
i'm unable to delete an existing email account, using iPhone 4 and latest OS. Anyone resolve this problem?
I thought maybe you had a restriction set to Accounts but if you can get to the final screen that's not it. I'd try resetting the phone. First do a hard reset. Turn the phone off then press the Home button an Power button at the same time and hold for 10 seconds or so until the logo appears. If that doesn't work go to Settings > General > Reset > Reset All Settings. That will basically restore the phone to a like new condition but keep your data, music, photos, etc. intact. Do a back up first though.
-
Problems checking gmail account using Safari
Hi there! I am having problems checking my gmail account using Safari. I can get to the site, log in, but as soon as it starts loading the page, my safari just freezes. Does anyone else have this same problem? If anyone knows a solution, i would greatly appreciate a little help. Also, i've relocated to another country, so i don't have access to an apple support center. but i would really like to get this problem solved on my own. Thanks much!!
Hi Louisa,
Welcome to the Apple Discussions.
Could you download and install Opera and see if it does the same using this alternative web browser.
Here's a link for you: http://www.opera.com/download/index.dml?opsys=MacOS&lng=en&ver=7.54u2&platform=M acOS&local=y
Let us know the results. -
I purchased all my Itunes off my home computer. My hard drive is having problems. Is there a way to use my Mac Pro to access my itunes account and find the songs that i purchased, and then transfer them to my Mac Pro so I can sync my nano?
I purchased all my Itunes off my home computer. My hard drive is having problems. Is there a way to use my Mac Pro to access my itunes account and find the songs that i purchased, and then transfer them to my Mac Pro so I can sync my nano?
-
Problem with creating customer account using TCA Java API
Hi,
I am trying to create customer account using TCA java API. i am getting exception saying PL/SQL numeric error: character to number conversion. but this error raises when calling API method
HzCustAccountV2Pub.createCustAccount.
can any body help me in solving this issue, any clue why this exception raises. i have tested even the code given in TCA API user guide. that code also gets same error.package client;
import java.math.BigDecimal;
import java.sql.Timestamp;
import java.sql.DriverManager;
import java.sql.SQLException;
import oracle.jdbc.driver.OracleConnection;
import oracle.jdbc.driver.OracleCallableStatement;
import oracle.jdbc.driver.OracleTypes;
import oracle.apps.ar.hz.v2api.HzCustAccountV2Pub;
import oracle.apps.ar.hz.v2api.HzPartyV2Pub;
import oracle.apps.ar.hz.v2api.HzCustomerProfileV2Pub;
class CreateCustAccount {
public static void main(String[] args) throws Exception {
HzCustAccountV2Pub.CustAccountRec p_cust_account_rec = new HzCustAccountV2Pub.CustAccountRec();
HzPartyV2Pub.PersonRec p_person_rec = new HzPartyV2Pub.PersonRec();
HzCustomerProfileV2Pub.CustomerProfileRec p_customer_profile_rec = new HzCustomerProfileV2Pub.CustomerProfileRec();
BigDecimal[] x_cust_account_id = new BigDecimal[1];
String[] x_account_number = new String[1];
BigDecimal[] x_party_id = new BigDecimal[1];
String[] x_party_number = new String[1];
BigDecimal[] x_profile_id = new BigDecimal[1];
String[] x_return_status = new String[1];
BigDecimal[] x_msg_count = new BigDecimal[1];
String[] x_msg_data = new String[1];
try
Class.forName ("oracle.jdbc.driver.OracleDriver");
OracleConnection conn = (OracleConnection) DriverManager.getConnection ("jdbc:oracle:thin:@ebiztst.trianz.int:1526:PATCH","apps","apps");
HzCustAccountV2Pub custaccountV2Pub = new HzCustAccountV2Pub();
p_cust_account_rec.account_name = "John Ac";
p_person_rec.person_first_name = "John";
p_person_rec.person_last_name = "Smith";
p_cust_account_rec.created_by_module = "TCA_EXAMPLE";
HzCustAccountV2Pub.createCustAccount(
conn
, "T"
, p_cust_account_rec
, p_person_rec
, p_customer_profile_rec
, "F"
, x_cust_account_id
, x_account_number
, x_party_id
, x_party_number
, x_profile_id
, x_return_status
, x_msg_count
, x_msg_data
System.out.println( "x_return_status = " + x_return_status[0] );
System.out.println( "x_msg_count = " + x_msg_count[0] );
System.out.println( "x_msg_data = " + x_msg_data[0]);
if (x_msg_count[0].intValue() > 1) {
OracleCallableStatement ocs = null;
for (int i=0; i<x_msg_count[0].intValue(); i++) {
ocs = (OracleCallableStatement)conn.prepareCall(
"begin ? := fnd_msg_pub.get( p_encoded => ’F’ ); end;");
ocs.registerOutParameter(1, OracleTypes.VARCHAR);
ocs.execute();
System.out.println((i + 1) + ". " + ocs.getString(1));
conn.close();
} catch (ClassNotFoundException e) {
System.out.println("Driver Not Found: " + e);
} catch (SQLException e) {
System.out.println("SQL Error." + e);
} -
Problem in creation of SOAP massage
hi
I am using JDeveloper (version 11.0) to create the proxy classes from WSDL
but i am getting an exception as following
SOAPFaultException
this exception indicate that there is some problem in creation of SOAP massage internally
so can anyone help me to know what is the problem?
If u want to see the code then i can display here.
thanks in advanceits due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan -
After i installed ios 7 in my iPhone 4s and I got problem to login into my icloud account.
There is a message appear and said "the operation couldn't be completed (com.apple.appleaccount error 403)"
can you help me ? how can i fix this problem ?
iPhone 4, iOS 7
iPhone 4S, iOS 7, (com.apple.appleaccount error 403)"Error: com.apple.appleaccount error 403
Recreate Error: On a Iphone/Ipad device that has "already" created the maximum of 3 per device Apple limit of ICloud account creation attempt to create or login to ICloud service tab in Settings. You will be presented with "com.apple.appleaccount error 403" which does not tell the laymen anything useful.
Cause: IOS 7 reports a "best guess" error instead of detailed error explanation.
How To Resolve Error: Find a device that has not been used to create an ICloud account the maximum 3 times and use it to create the ICloud account by logging into the Settings/ICloud tab with the Apple ID you want a ICloud account created for.
Keep in mind this will use up one of the three lifetime allowed ICloud account creations allowed by Apple on that device.
Also per support: If an existing account is logged into the ICloud service. A. Backup phone using iTunes on a mac/pc. B. At bottome of Settings/ICloud Delete the account "AND" all the user date from the phone. It will offer the Delete all data option. The reason for Deletion(and is why we backed up on a pc vs. the cloud) is when you create the new ICloud account it will backup all of the Device owners information to the wrong persons account.
Once you have created the new ICloud account log into that account on device that was presenting error: "com.apple.appleaccount error 403" it should allow the ICloud login.
Once you have verified the "device with error" is ICloud functional delete the ICloud account from the device used to seed the ICloud account and delete again all user data from cloud. Restore the recently created mac/pc Itunes locally created backup to the phone and then go to Settings/ICloud and login with the device owners Apple ID and password and verify your backup to the ICloud settings and Eureka! your done.
It took less time to do that for me to type this lol. -
Creating filevaulted account using commandline
Need help to locate the magic trigger.
During the happy days of Tiger I was able to create a local user account with filevault enabled using a simple script. This did result in a sparsefile being created that worked just like the one the User account creation tool created.
No moving forward to Leopard I'm facing the challenge of moving away from sparsefile and into the realm of sparsebundle. I can create the filevault, access it and dump data into it, the freshly created user can log in to the system using the provided password. But the second that the user are trying to change the password, he/she gets a 'You cannot change your password to the password you entered'. The more detailed description tells me that it is due to the account using filevault. The suggestion is to turn filevault off and on again.
Now I'm puzzled - with sparsefiles this works without any problem, the second that I'm changing to sparsebundle it fails. Wherein lies the difference - the Apple provided tool for account creation manages to create accounts that can change password.
Any hints are more than welcome, and no I cannot change to use OD, MCX. The accounts are created very locally on the single machine.Hi V.K.
sorry about not posting a sample script. I'w now spend some time getting the pieces together from the large python script that are creating the user account. So here it is.
#!/bin/sh
mkdir /Users/johndoe
hdiutil create -size 2g -type SPARSEBUNDLE /Users/johndoe/johndoe.sparsebundle \
-volname johndoe -stdinpass -encryption \
-certificate /Library/Keychains/FileVaultMaster.cer -fs HFS+
dscl localhost create /Local/Default/Users/johndoe uid 12345
dscl localhost create /Local/Default/Users/johndoe gid 12345
dscl localhost create /Local/Default/Users/johndoe home /Users/johndoe
dscl localhost create /Local/Default/Users/johndoe RealName 'John Doe'
dscl localhost create /Local/Default/Users/johndoe UserShell /bin/bash
dscl localhost create /Local/Default/Users/johndoe HomeDirectory \
'<home_dir><url>file://localhost/Users/johndoe/johndoe.sparsebundle</url></home_dir>'
dscl localhost create /Local/Default/Users/johndoe Picture \
'/Library/User Pictures/Animals/Dragonfly.tif'
dscl localhost create /Local/Default/Groups/johndoe PrimaryGroupID 12345
/usr/bin/passwd johndoe
mkdir -p /tmp/work
hdiutil attach -mountpoint /mnt/work -stdinpass /Users/johndoe/johndoe.sparsebundle
ditto -rsrcFork '/System/Library/User Template/English.lproj/' /mnt/work
ditto -rsrcFork '/System/Library/User Template/English.lproj/' /mnt/work
chown -Rh johndoe:johndoe /mnt/work
hdiutil eject /mnt/work
End of script
As for not using the gui - well I'm at first not the author of the script, just the one fixing the issue with it in combination with SPARSEBUNDLE. Second I have no intention of making the Apple script counterpart to drive the UI user creation interface. The reason for the script in the first place is that we are not running a OD, nor binding the units to AD and do not have any plans in deploying MCX at this point. User accounts are created locally on the unit as part of a automated prep scrip, but if there are anyone that has a Apple script that will create the account and enable SPARSEBUNDLE max size - I'm all ears. -
Problem in creation of Customer Master
Hi gurus,
I am facing problem in creation of customer master.
I have created a account group zz01 copying from 0001.which has internal no. assignement for the customer.
Now i am trying to create a customer master, at partner functions level under sales area data... the system is asking for the no. for each partner functions.. when i tried to manually enter, the system is not taking any number nor it is letting me save the data.
Please help me out in acertaining, what could be the issue.
regards
Gupta
[email protected]its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan
Maybe you are looking for
-
TS3694 hi my name is joe im having a problem restoreing my phone and this error keeps coming up 1015
i am having a problem restoring my iphone 3g
-
Initialzation error on dvd player (nilP)
hello all, this is my 1st post...i keep getting an initialzation error while trying to play a dvd...the error is (nilP)...can anyone help...i've had this problem for 3 weeks now..computer is month old..i am a new mac user....dvd player work for 1 wee
-
Ipod Sync. Will I LOSE MY MUSIC??
Hey everone. I'm just wondering, does anyone know about synchronizing your music through itunes? My concern is that if I do this on my home computer and then take my ipod say, to my friend's house, I might lose all of my music on my ipod until I go b
-
[Solved] ampache - missing mysql extensions and Iconv support
I was about to install amache. I've installed it using yaourt -S ampache. Installation went fine. But when I go to IP/ampache I see 2 errors: Mysql for PHP [ ERROR ] This test checks to see if you have the mysql extensions loaded for PHP. These are r
-
I have no DVD drive on my computer. Where are the downloads located?
I received discs for Photoshop elements & premier elements 12 with my new camera but my computer doesn't have a DVD drive. I assumed it would be no big deal to download them from the Internet...wrong. .I have serial numbers to install Photoshop but