Problem in creation of GL account

Hi Experts,
When we create the GL account in FS00, it ask for the Group Account Number.
We have checked the field status of the GL account group and this field is not existing there. Where to control this field?
Regards,
Bhavesh

Hi,
Go to transaction OB13 and remove the gorup COA from your operating COA.
Then this field will automatically disappear from FS00.
Just make sure that you actually do not want to use the group account, as the consolidation happens on its basis.
Regards,
Gaurav

Similar Messages

Install problem with creation of admin accounts

I am getting following error while installing on Windows 2000. Any suggestions..? on what access is needed?.
INFO[E] 2004-08-23 16:22:16
Account group="CTS\SAP_J2E_GlobalAdmin" does not exist. <#1>
Transaction begin ********************************************************
TRACE
account SAP_LocalAdmin exists with parameter domain="dl7843"
TRACE
account SAP_J2E_LocalAdmin exists with parameter domain="dl7843"
TRACE
Account CTS/SAP_J2E_GlobalAdmin has ADS path 'WinNT://CTS/SAP_J2E_GlobalAdmin'
TRACE
existence check for group CTS\SAP_J2E_GlobalAdmin returned false.
ERROR 2004-08-23 16:22:38
FSL-01002 Unable to create account CTS\SAP_J2E_GlobalAdmin. Access is denied.
Transaction end **********************************************************
WARNING 2004-08-23 16:23:03
Installation canceled by user request.

Hello Anand,
you have to logon as a local user with local administrator rights. The installation doesn't run with a Domain user with local administrator rights.
Regards
Gregor

Enhancement for MB1C/MB1A before creation of an Accounting Document

Hello everyone,
Actually I want to get the material document number(MBLNR) before the creation of an accounting document when using the transaction MB1C or MB1A.
I will have to use the value 'MBLNR' to update a field during the creation of an accounting document(the field SGTXT should be updated with the MBLNR).
I have already tested the following BADI's which provide me the value of the material document number:
- MB_DOCUMENT_BADI (BAdIs During Creation of a Material Document)
- MB_DOCUMENT_BADI_SAP (BADI for Creation and Changing of a Material Document)
and I am using the BaDi 'AC_DOCUMENT' to update the required field with the material document number(MBLNR).
The problem is that the BADI's 'MB_DOCUMENT_BADI ' and 'MB_DOCUMENT_BADI SAP' are call after the creation of the accouting document(after the BADI 'ACDOCUMENT') meaning that I can't used these BADI's as the value MBLNR is not available before.
My idea was to export the value to memory ID before the creation of accounting document and import the value in memory ID in the BADI's 'AC_DOCUMENT' to update the field SGTXT.
I am currently looking for other enhancements or BADI's which can help me to solve this issue.
After much research on the internet, I did not succeed in finding a suitable hint which can help me.
I would be grateful if someone could guide me(even a small hint will help me a lot as am I am new in the world of BADI's) on how to find a suitable way to get the document number(MBLNR) before the creation of an accounting document(before calling the BADI 'AC_DOCUMENT').
Thanks a lot in advance for you help.
Kind Regards,
Bryan

Hi
I had a look through the program and found an enhancement spot ES_SAPMM07M available through out. Sadly i am not able to create a material document in my system some master data issue but there are various enhancement points in this enahcmenet and you need to debug on save and find the right enhancement point to export the value.
Put a break point in the following includes which have only one subroutine in them
MM07MFF9_F_SEGMENTE_BEWERTEN
MM07MFF9_F_SEGMENTE_ERSTELLEN---> In this accounting item are created. If stops here and in debugger change the value if it works then there are various enhancement spot for the same.
MM07MFF9_F_SEGMENTE_ERZEUGEN
MM07MFF9_F_SEGMENTE_GENERIEREN
Hope it helps
Nabheet
Edited by: nabheetmadan09 on Feb 1, 2012 3:49 PM

Problem in creation of Customer Master

Hi gurus,
I am facing problem in creation of customer master.
I have created a account group zz01 copying from 0001.which has internal no. assignement for the customer.
Now i am trying to create a customer master, at partner functions level under sales area data... the system is asking for the no. for each partner functions.. when i tried to manually enter, the system is not taking any number nor it is letting me save the data.
Please help me out in acertaining, what could be the issue.
regards
Gupta
[email protected]

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

Problem in creation of SOAP massage

hi
I am using JDeveloper (version 11.0) to create the proxy classes from WSDL
but i am getting an exception as following
SOAPFaultException
this exception indicate that there is some problem in creation of SOAP massage internally
so can anyone help me to know what is the problem?
If u want to see the code then i can display here.
thanks in advance

its due to the number ranges that is specified in the partner determination ... chech what is the number range assigned in the parner determination ,,, so once u check that u have to manually enter the number between that range only .. this should solve ur problem...
path to check the number range is as below :
spro-img-logistic generalbusiness partner-customers---define account groups and field selection ---
at this point click position button at the bottom and give ur account group .. select ur account group and click detail button .. now inside that u can see the specified number range .. dafault is 08 ( means u can specify between 400000 to 499999)..
and some times u may not have defined number range... check urs and create accordingly ... this should solve ur problem...
rewards if solved ..
thank you
madhan

Problem in creation of STO(stock transport order)

hi all SAP gurus,
i am facing the problem in creation of stock transport order with ME21N code. i m getting the error msg of "Not possible to determine shipping data for material in STO "
i have checked the stock transport order setup in customization. but not getting the clear idea to come out from this problem.
if anybody have the idea of " how to do the customization of stock transport order setup, pls. let me explain.
thnx in advance.
rgrds,
rajesh

Hi Rajesh,
when ur creating STO with UB doc type, then you have to maintain material in both the plants.
Regarding the error which is comming for you, you have to check the settings at
SPRO- IMG- MM-Purchasing-Set up stock transport order- Assign delivery type & Checking rule
here for document type UB and your supplying plant-XXXX select nothing for Dlv type(delivery type) and chr - 01 and after this save.
After this you create STO as you are doing and see what the system is prompting.
For any further clarification let me know.
Regards,
NJ

Problem in creation of HUs through FM HU_REPACK and HU_POST

Hi Experts
This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
I am sending two Unique Sources HUs with single destination HU for the same material and batch into HU_REPACK and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
Please find the example of the HU created in the system
0 10020000038479 S-DISP 1 EA S DISPNSARY
1 0024632192 000004 810062 0.250 KG L0533A4172 Lactose
1 0024632192 000004 810062 24.900 KG L0533A4172 Lactose
Material is 810062
Batch is L0533A4172
Can you please assist me how to acheive single line item HU when we are trying to repack the data for same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

Hi Sailaja,
I have similar requirements like this before with HU_PACKING_AND_UNPACKING FM. It was a tough debugging before I came up with the right solution. Unfortunately, I was not able to document that code..
But here is what I have been doing.
Youre on track with the solution below, never use BDC as it will only limit the Handling units that you wish to put into.
The function modules that starts with V5_ plays important role as you need to initialize the global variables and table of this function group with values before calling HU_PACKING_AND_UNPACKING FM
Debug inside the Function module, and look for the FM that returns SY-SUBRC <> 0 then set a breakpoint.
Restart the program then debug inside that FM again (and I do not want to go further on the details, I give you the presumption of literacy)
You will find some items that has no value, try to initialize everything by utilizing the FM for this function group V51S.
Happy Debugging.

Problem in Creation of Handling Units through HU_REPACK and HU_POST FM

Hi Experts
        This is regarding the problem in creation of HUs with function modules HU_REPACK and HU_POST.
I am sending two Unique Sources HUs with single destination HU for the same material and batch into HU_REPACK and it shows that it is successfully repacked and soon as the HU_REPACK function module passess I have called HU_POST without any parameters except messages..As the data will be picked up auomatically from the internal memory as these function module are related same function group.
Even the HU_POST FM passes successfully and also it creates a Transfer order but the problem is that THe HU is created with the MULTIPLE LINE ITEMS for the same material and Batch which should not be done at all .
Please find the example of the HU created in the system
    0     10020000038479     S-DISP     1     EA          S DISPNSARY
    1     0024632192 000004     810062     0.250     KG     L0533A4172     Lactose
    1     0024632192 000004     810062     24.900     KG     L0533A4172     Lactose
Material is 810062
Batch    is L0533A4172
Can you please assist me how to acheive single line item HU when we are trying to repack the data for same material and batch as it does while you create the HU through Manual processing i.e HU02 etc

*

Problem in creation of any purchasing doc against plant 0001

Hi MM Experts,
I am facing problem in creation of any purchasing doc (i.e: PR or PO) against plant 0001.This is available in the system and assigned to company code. I can create Material master with this plant 0001 and copy to create new plant. But Can't create any pur doc? also in plant list in pur doc showing the rest of the plant except plant 0001.
I m working on ECC 6.0.
Regards,

Dear Sairam/Steve,
I got solution for my problem. The problem is that address number not maintained for 0001 plant.This solution available from the following note. please go thro...
Note 433997 introduced a new logic for the F4 help for plants.
solution proposed in note 433997 :
To maintain the address number of a plant subsequently, startTransaction OX10 for the affected plant ('Change plants') view. Click the 'Address' pushbutton (envelope) or (shiftF5). In the subsequent screen ('Change address'), press Enter or click the 'Copy' pushbutton and save using the 'Save' pushbutton (disk) or (CtrlS).
Then the plant should have an address number and should also be displayed in the search help.
Thank you all
Regards,

Problem in creation of order relevant - intercompany invoice

Dear all ,
I am facing problem in creation of intercompany invoice which is sales order relevant . Please tell which settings is required to resolve this as all the settings has been made.
Send ur email id so that the problem can be described if required....
Thanks .........

Hi,
while creating inter company sales order give the delivering plant in the overview screen. so that enables the system and tells that that is inter company sales order . u can verify whether the system takes which sales order whether it is standard order or inter company? by going to the conditions in the item overview in that u can find the "pi01" or "pi02" and select the delivery details there u can find the delivering plant which is supplying plant and the shipping point of the supplying plant..
in case of doubt u can mail me at [email protected]
Reward if Helpful..
Regards,
Praveen Kumar.D

Problems with creation of catalogue XPGrpwise and temporary

Problems with creation of catalogue XPGrpwise and temporary files.
I use GroupWise 8.01 and WinXP (SP2), OpenOffice 3.1.
Why at opening files in Library, temporary files are not created in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\XPGrpwise, and created in catalogue C:\Documents and Settings\Jon Smith\My Documents. That causes problems. How to change a situation that worked as it is necessary.
Catalogue XPGrpWise is created and leaves duly in catalogue C:\Documents and Settings\Jon Smith\Local Settings\Temp\.

Cvetaev,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

I no longer have access to the back up email address I used when I set up my apple ID. I have since forgotten the answers to my security questions and am having a problem making changes to my account. What can I do?

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(114957)

Problem with Creation of TemSe file...

HI Experts...
Here im facing the problem with creation of # 3 rd Quarters
Temse file.when ever i use the tcode pc00_m40_f24 and entering the details of quater 3 ...here im showing up the ABAP Runtime error."""Overflow for arthimitic operation Type P in program HINCF240"".
What could be done to overcome the problem.Please advice.
Regards,
V Sai.

Hi experts/Sriram...
Thanks for the reply.
The -
>showing the line....
QS80_TAB-DEDMT=QS80_TAB-DEDMT+S80-DEDMT
Where should we change to get rid of this runtime error.
Here in my quality everthing is fine and we have uploaded patches in quality upto recent one sp80.But in prod. the patchlevel is sp71.Will it be the reason.
Please advice me on this as i have to complete the issue of F16.
Thanks and Regards,
V Sai.

There is any Performance problem with Creation of many Y or Z Programs.

HI,
There is any Performance problem with Creation of many Y or Z Programs. plz give clarity regarding this to me......
regards
ganesh

Ganesh,
Can you please mention the context and the purpose of creating these custom program. And application are you referring to?
Regards,
Rohit

Problem with creation of jar with external libraries

hi guys, I've no problem with creation of jar,i use this command:
jar -mcf MANIFEST.MF NameFile.jar *.class
my file manifest is this:
Manifest-Version: 1.0
Created-By: Me
Main-Class: NameFile
Now,I've to make a jar file,but i have to use some external libraries in jar format.
I've read on sun tutorial and i've added to manifest this line:
Class-Path: dt.jar formshelp.jar formsrt.jar jh.jar looks-1.3.1.jar substance.jar TableLayout.jar
But the jar file doesn't work, neither with a double click nor with console...
Someone can help me?Thanks!:)

Darkweb wrote:
sorry but,the external libraries that i use are in .jar,what i've to do to include these libraries in my jar?One of 3 things
1) Take them out of the jar, and put them in a folder, preferably a folder in the same folder as the jar
2) Write a custom classloader to load classes from nested jars
3) Extract the contents of all the dependency jars, and jar them all up with your own code
The first is almost always the most preferable, the second one is doable but brittle and resistent to updating dependencies ( you have to release everything for any changes you need, even if it's not a change in your own code ) and the third one is tedious and suffers from the same robustness problems of the second, not to mention that a lot of software licences prohibit you from actually doing it. Do the first one, it's by far the most common and easiest to maintain. I really wouldn't advise the third option, ever, though. Any activity that reduces the modularity of your application is ill-advised

Problem in creation of GL account

Similar Messages

Maybe you are looking for