Problem in customize infotype data for save

Hi experts,
specially for ABAP-hr guys.....Can u pls help me in providing me the correct solution for the below:
I had created the new infotype with table control now i have to save this table control value means list box value or check box value which is been inside the table control.How i save these values in the table .
Shall I have to write the query for Insert the data in infotype or some other way.Because if i take the only fields in the infotype insted of table control no need to write the query statement.
How can i achive this pls help me.
Thanks
sandeep

Hi,
Just remember one thing never ever fire any SQL query (Inset,Delete,Update) on infotypes it can cause havoc.
to maintain infotypes SAP has given few standard function modules. use HR-INFOTYPE-OPERATION to maintain infotype data.
you can also use BDCs  and LSMWs to upload data as well but never a quey unless if u dnt have ne other options and u knw exact impacts of the same.

Similar Messages

  • Problem while refreshing the data for the second time using excel services in sharepoint 2013...

    Hi,
    I have migrated my Sharepoint from 2010 to 2013.I am able to get the data at the first time of refresh when I click on refresh for the second time I am getting the empty the sheet.
    below find the flow of refresh
    First Refresh
    On Click of refresh open the workbook with excel services and return the session id.
    Using that session I am invoking RefrehAsync method of excel services
    After refresh completed I am setting the calculation of workbook as automatic(to calculate the formulas) using the same session id
    After setting the calculation as Automatic I am setting the calculation type as full(recalculate) using the same session id.
    Now I am able to see the data
    Second Refresh
    After clicking on refresh instead of opening the workbook I am using the session id(already opened workbook) and setting the calculation type as manual
    I am following the same process from refresh(RefreshAsync) as I have followed in first refresh.
    This time my formulas are not getting calculated because of that I am not able to see the data.
    Could you please let me know that am I missing anything here?
    Is this know issue in Sharepoint2013 excel services as same code is working fine with Sharepoint2010.
    If I close the workbook(session id null) and opens(new session id) for all the refreshes it is working and I am able to see the data.
    Thanks,
    Meenakshi Nagpal
    N.Meenakshi

    I am able to see the data for the second refresh  if I change the data source.If I use the same data source which is used in the first refresh I am not getting the data.Excel services will contact the cubes and calculate the formulas in my workbook.
    Could you please let me know what could be the problem at second refresh while contacting the same data source with same session id?
    Please help me asap.
    Thanks,
    Meenakshi Nagpal
    N.Meenakshi

  • Fpga Simulation from Custom VI'a. Problem with reading TDMS data for simulation.

    Hi there. I am havin a small no Big problem trying to use certein data for simulation purpose. All I/O are set up in custom Via. Everything works fine when it is set up like on a pic.1 Unfortunatly I would like to use certein data writtent to TDMS file. I tried to do it like in PIC2. It works on normal VI'a. It reads the file to array. Unfortunatly I don't know how to make it works in custom via set up for FPGA simulation. I am getting 0.
    PIC.1 Random data...
    PIC.2 Data from a file format.

    oki I managed my self. For some reason I had to skip first number in the array.

  • Problem in saving the customize infotype data

    Dear All ,
    I created the new infotype with table control, when am going to save data it's only saving the header data means personal no ,begdate and end date my table control data is not going save kindly help me to resolve that question.How i can save data from that  custmize infotype ,And also am not a fully technical guyyy...so help me ....
    It's very important for me ...
    kindly help me .......
    thanks
    sandeep

    Dear Amit ,
                      I don't think that's the issue i craeted two infotype in second infotype i have only fields ,am able to save the data but in other infotypes i have the table control,am not able to save table control data in my PAXXXX table so kindly help or tell me the procedure how we can do.Now hope you understne my problem.
    kindly help me
    sandeep

  • Problem in scrambling HR data for infotype 0021

    hi experts,
    i am working on hr data scrambling project.But i am facing problem in updating the table(master table) for infotype 0021.
    i am using function module hr_infotype_operation. The error message it shows " EPG.... 009 NO DATA IS STORED FOR 0021
    IN SELECTED PERIOD".
    thanks

    and?
    That simply means that you are trying to update non-existing data... which of course is not possible
    Perhaps you could drop the code over here so we can check how you are using the FM...
    Kr,
    m.

  • I have a problem during the collect data and save it in file with the HP8753C

    Hello,
    I'm using the "HP8753 collect and display data.vi" with the functionnality "save" in file (.txt or xls).
    When I'm using it to collect and save data one time to time, I have no problem. But when I would like to use it to collect and save several data with a structure "For", the HP8753 status will become blocked and the collect and save data in file is disable.
    The only function "collect data" with a structure "for" is Ok but will become not OK with the option "save" in file. Why, please ?

    Hello,
    Thank you for contacting National Instruments.
    It sounds like your instrument is "hanging" or "freezing" when you try to read and save data from it in LabVIEW.
    I took a look at the context help for that particular VI. It appears that if you attempt to read data from the HP8753 while it is also taking measurements, it can cause the instrument to hang. This may be the problem you are experiencing.
    Look over your program and ensure that the instrument is not trying to take new measurements as you read data from it in LabVIEW. Sequence structures may be useful in this regard. If you are still experiencing problems, however, let me know.
    Matthew C
    Applications Engineer
    National Instruments

  • Problem loading text master data for one value

    Hi guru's,
    We are trying to load texts for an standard characteristic (data element : Char 30). The problem comes with characteristic value 4700112703/04/19 , all other values load correct but this one is recognized by SAP as an incorrect value. It seems, by the PSA explanation, that the / is incorrect.
    Do you know why this value is incorrect ? Is there any way to load this record to the characteristic ?
    Thanks in advance.

    Hi,
    In RSKC specify the value as ALL_CAPITAL which would allow all the necessary and SAP supported values(including /) to come into BW.
    Refer this blog for more information
    /people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
    Regards,
    Rik

  • Problems with maintaining master data for infoobject 0SOLD_TO

    Hello experts,
    I'm not getting 'maintain master dada' option when I right click on the infoobject 0SOLD_TO. The data is already there from pervious data loads (from R/3 systems) and is visible in the reports. I'm using this infoobject in cube 0SD_C05 to report quotation/order details. Am I missing something here? Please guide.
    Thanks
    Sumit

    Hi Sumit,
    It looks you have asked your question in a wrong forum.
    Please use BI forum to post your question.
    Regards,
    Pooja

  • Credit master data for Customer

    Hi,
    I need solution for the below problem.
    Credit master data for Customer "X" is not maintained.
    Is there any possibility to get the information /Error message during sales order creation/Save for Customer "X" as Credit master data is not maintain.
    Information/Error message shouldd be:No credit master data maintain for Customer "X"
    Thanks for your help.
    Regards,
    Balaji.

    Hi
    You can use the followig user exit which will perform a check while saving the order.
    Take the help of your abaper to write a code to check if the credit master has been maintained for the customer before saving the order.
    Program,: MV45AFZZ
    USEREXIT_SAVE_DOCUMENT_PREPARE
    Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
    The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
    Regards
    Madhu

  • No data for a week now, why?

    I just came to Verizon a week ago. I got the Droid Razr for my wife and i had to order the Razr Maxx for me. Well i took some time to get my phone but once i did i had it one day and the next we had no data service. Both our phones have no data and sometimes 1x or 3g shows up but will disapper right after. I was told it was a service outage, well thats fine but a week later it is not fine. The thing that really gets me is that four of my co workers have Verizon and they have 3g. One has a Droid Bionac and the others have non smartphones. I get no answer from Verizon, i have called and went through the steps and then they say they will call back in four hours and get an update from me but they don't. I"m just getting very angry and i don't understand why i cant be told whats going on. I would also like to know why it seems the Razr's are the only ones with this problem. I need data for work and if this is what i have to put up with i might have to move on. I really would like to give verizon a chance but this is getting old. Is anyone else having these problems. Oh yeah i live in WV by the way.

    Hello Heifitz
    Having to wait a week for data coverage would be very upseting.  Let's get this fixed as soon as possible.
    Are you still experiencing the issue? What is your current zip code? Please remove the Sim card and reinsert. Is Wifi turned off?  If not please turn Wifi off and retest. Please power the device on in safe mode and retest. This will rule out any application that could be interfering. Here's how to power on in safe mode:
    Power Off the device
    Power On the device
    As soon as DROID Eye screen displays, press and Hold both Volume Up & Volume Down keys (Keep pressed until you reach Idle screen)
    Then the main screen will display "Safe Mode"
    Please let me know if this helps
    Thank you
    JoeL_VZW
    Please follow us on twitter @vzwsupport

  • Getting all data for ESS Pers, Address, Bank & Family screen from SAP 4.7

    Hi,
    I need suggestions on a weird situation that we have in one of the ESS/MSS project.
    Following are the systems that client has: -
          1. Enterprise Portal 7.0
          2. SAP ECC 6.0  -
    > (all JCOs in ESS/MSS DCs point to this system.. so in short this system is mapped to Portal)
          3. SAP 4.7            -
    > (they are maintaining all data for Pers, Address, Bank & Family here)
          4. Infotype data for some infotypes (such as 0105) are synched between these two SAP systems.
    Now, there are some standard + Z fields added in infotypes in SAP4.7 system.
    To display Z- fields on Portal, here is what is already done: -
           - Z - RFC is written in SAP ECC6.0 that calls SAP 4.7 to get the data.
           - Standard ESS WD DCs (pers, addr, fam & bank)  are edited to call above RFC to display Z - fields.
    Now, Client wants : -
          - to display all data from SAP4.7 system on portal (standard as well as Z fields).
          - use ECC6.0 system as a middle box between EP & SAP4.7.. There will be RFCs written in SAP ECC6.0 system that will call FMs in SAP 4.7 and return the data
    Now, I don't understand how do I change standard WD DCs that has some standard ARFC models (HRXSS_PER*) written in them.
    Any ideas on how to proceed on these objectives?
    Please help.
    Thanks & Regards,
    Amey

    Hi Siddarth,
    Thanks for reply.
    So I have following alternatives ? : -
    Option-1 : Sync data between ECC6.0 and SAP4.7 for these Infotypes at regular intervals.
                        (No changes @ ABAP & WD code)
    Option-2 : Enhance standard RFCs (such as HRXSS_PER_READ_P0006_FR) in ECC6.0 system to get data from SAP4.7.
                        (Changes @ ABAP side only)
    Option-3 : Create custom RFCs in ECC6.0 and import them at WD side and set data in 'SelectedInfotype' node?
                        Then what do we do about standard RFC calls that are already present in these DCs?
                        I am a bit skeptical about this approach.
                        (lot of work in both ABAP & WD side)
    Can you please comment?

  • Binding data for af:forEach from BeakingBean

    I have a problem trying to bind data for af:forEach. The thing is that I want to read data like this;
       <af:forEach items="#{BackingBean.myClassValue1.ArrayList1.myClassValue1.ArrayList2}" var="raz">
                            <h:column>
                                  <afh:tableLayout width="20">
                                    <afh:rowLayout>
                                      <afh:cellFormat}">
                                        <af:outputText value="#{raz.name}"/>
                                      </afh:cellFormat>
                                    </afh:rowLayout>
                                  </afh:tableLayout>{code}
    Works if I read like: {code}BackingBean.myClassValue1.ArrayList1{code} but not if I read like: {code}BackingBean.myClassValue1.ArrayList1.myClassValue1.ArrayList2{code}
    Anyone have any ideas pls?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    I did...
    It works for
    <h:outputText value="#{BackingBean.myClassValue1}" />
    <h:outputText value="#{BackingBean.myClassValue1.ArrayList1}" />...but for ...
    <h:outputText value="#{BackingBean.myClassValue1.ArrayList1.myClassValue1}" />getting this error on page:
    javax.servlet.jsp.JspException: javax.faces.el.ReferenceSyntaxException: The "." operator was supplied with an index value of type "java.lang.String" to be applied to a List or array, but that value cannot be converted to an integer.It looks like it empty but its not! When I debug in BackingBean the data its full like it should be!

  • I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image"  Help!

    I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image"  Help!

    More information about this issue can be found here:
    https://forums.adobe.com/thread/1672655
    A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
    Then download each of the individual updates and run them sequentially. 
    I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
    You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
    http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
    Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
    Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
    Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
    Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
    Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
    Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
    Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
    Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
    Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

  • Problem choose method for save and retrive data

    Hi
    I want to conver sql database to berkeley db.my sql database has over that 40 tables and each table has diffrent fields (like varchar,int,...)and some tables have over that 30 fields .I want to use method that berkeleydbcorec pdf explain in chapter 3(Using C Structures with DB):
    what is the limitation for use first method for store information?
    I think only limitation is waste database.
    what are the advantages of use (marshalling the data)?
    if I use marshalling the data for store records does speed for fetch information reduce or not?
    is it good use marsharling or first method for store information?
    please help me.
    regards,
    saaed

    Hi,
    Since nobody else has posted anything I thought I would mention a couple of things:
    Most applications that need a database need a way to work with records and fields. Berkeley DB does not have a schema so it is up to the application to format the data. Some databases through their DML make it easy to the application to look at fields but they are doing work for you behind the scenes.
    Some dbms's if they support variable length fields store some information on the page to delimit fields. At run time there is some overhead in doing that as the dbmx needs to find the location on the page for the next field and so forth. So although the application may not have to write the code to obtain fields from records there still is the overhead in the database to do so.
    As you noted in Berkeley DB, you do the marshalling and unmarshalling of data. Since you know your data best, you can optimize it as you see fit.
    Perhaps you should try this on one table first and see what the performance is.
    I hope this helps.
    Ron

  • Logical database PNP not retrieving data for custom infotypes.

    Hi all,
    I am using logical database PNP in a program. I have declared infotypes as follows:
    INFOTYPES: 0001, 0002, 0041, 9801, 9840.
    The problem is that the logical database is retrieving data for the standard infotypes but not for the custom infotypes. Any explanation as to why data for custom infotypes is not being retireved and how this can be solved will be greatly appreciated.
    regards,
    Hamza

    solved

Maybe you are looking for