Problem in DAM video conversion

Hi,
I am using Webcenter Content 11.1.1.8.0 and I configured IBR for video conversion.
When I uploadmp4 video file, I am getting below error,
Content item 'Content000242' was not successfully checked in. Unable to set the default rendition set for DAM conversion
I have seen the below instructions in documentation that I need to update config file.
1. Open the following directory of your Content Server instance:
<IntradocDir>/config/
2. Open the config.cfg file in a standard text editor.
3. Under the #Additional Variables section, add DefaultVideoConversionSet and set
it equal to the factory you want as the default rendition set. The default must
match a rendition set in the choice list of the VideoConversions metadata field,
defined using the Configuration Manager applet.
4. Save changes to the config.cfg file and close the file.
5. Restart Content Server
http://docs.oracle.com/cd/E14571_01/doc.1111/e10800.pdf
Pg 85 and 86.
What is the value I should put in config. file.
DefaultVideoConversionSet = {What Value Goes Here}.
Please let me know if I need to do any other configuration.
Thanks

Hi Kumar ,
I think the same question is posted here :
Unable to set the default rendition set for DAM conversion
Thanks,
Srinath

Similar Messages

DAM: video conversion alternatives to FlipFactory

Hi all,
my goal is to implement a video conversion solution using UCM+DAM.
As an alternative to FlipFactory i found info on how to configure and use FFMpeg (gpl license).
I have 2 questions:
- are there any alternative to FFMpeg?
- what are the limitations of FFMpeg versus FlipFactory?
Thanx in advance
F.

Hello!
I'm interesting for the video conversion with FFmpeg. Can you show me info on how to configure and use FFMpeg, please?
Thanks,
Viktor

ZEN Vision M 30GB Video Conversion problem: black scr

My husband cannot display any video on his ZEN Vision M 30 GB. Any video converted comes over with ONLY audio, black screen (? no video display )This happened with the original firmware and software. I updated firmware and did all available software updates; no change. I had a previous ZEN Vision M 30GB, which did not have any problem with video conversion and display.Are there any known problems with specific Media Player versions, or QuickTime ?which may be a potential cause of this problem?( I have heard that this product works best with Media Player 9. )Anyone had similar problems, or have any ideas?Thanks,Ravenquille

Problem apparently solved: Last night, I downloaded and installed the free program, SUPER. My husband has not had a problem so far; been working beautifully! Ravenquille

N95 video conversion problem

I use the registered software of "ImTOO MPEG Encoder 3" to convert videos shot with my N95 to "MPG-1" or "MPG-2" format in order to play it on any VCD/DVD player. There is not much problem with smaller videos, I mean of 1-2 minutes of length. But with larger video files, i.e., more than 150MB, the video is converted without sound. When I play such video on VCD/DVD player, the whole video is played without sound, and at the end the last frame of the video is freezed, and the sound of whole video starts.
With smaller video, the sound is not Lip-Synched either.
Can anybody tell me any reliable software to successfully convert MP4 videos to MPG format.
Thanks

Hi !
I use the same software but no problems to convert small or large mp4 to avi, wmv..ecc...
N95 8GB V 15.0.015

How can I change the default video conversion applied when I copy an AVI file from my PC to my Android HTC One M8 phone?

Here's the situation...
I have an Android HTC One M8 phone which I connect via USB cable to my PC, then I use Windows Explorer to drag and drop an AVI file from my PC onto a target folder on the phone. When I would do this after I had first purchased my phone a message box
would come up with the heading "Convert and Copy" and ask me "Do you want to convert <filename> before it's copied to your device?" and give me the options "Yes, convert and copy (recommended)" or "No, just
copy Your file will be copied, but might not play on your device."
If I chose to convert it converted the file to MP4. No problem, that's what I wanted.
The problem I now have is that after doing some work with other video applications a while ago where I was outputting WMV files I now find that the default conversion for the above described copy from PC to Android phone now converts files to WMV.
I simply want it to go back to converting video files copied to my phone as MP4, but I can't seem to find where I can set this!
It appears that the copy/conversion process in Explorer is being handled in the "Portable Devices Shell Extension" dll - WPDSHEXT.DLL
Can anyone tell me what I need to do to set the default video conversion back to MP4 ???
Thanks

Thanks Rob.
I actually had no clue what the core problem was caused by. So it's Windows itself...that helps some.
I'll resubmit there. It might actually have saved time for it to simply have been moved to there instead of off-topic, though I suppose you have to follow protocol.

Creative Vision:M, best video conversion program(freeware or softwar

I recently got a creative vision:m and love it, but i cannot figure out whether or not my recently purchased "23 Copy DVD Gold Edition" software is worth the fifty bucks i had to pay. Does anyone know of online freeware etc that works well and produces good quality video conversion (esp. from .mp4 to .avi etc.). I know there is a free converter that comes with the program but when i tried it the videos played slightly choppy on my vision:m. When i used .avi format, there was no such problem. Thanks

Problem apparently solved: Last night, I downloaded and installed the free program, SUPER. My husband has not had a problem so far; been working beautifully! Ravenquille

Best practice video conversion from download

I am looking for best practice for video conversions.
I am downloading adobe recordings via this method:
http://server.adobeconnect.com/xyz/output/filename.zip?download=zip
From here, I have been converting the FLVs using either freemake video converter or FLV converter. I have tried converting into AVI (XVID), MOV, WMV, etc. (I need the file to be under 600 MB for an hour of recording, therefore it is going to need some type of compression).
My goal is to import the video into Sony Vegas Pro 10 for further editting. I have found that whatever method I use, the video and audio does not sync properly about 50% of the time. The video time is longer than the audio time usually. Or that there are other various errors, such as the video just freezing halfway through the video.
I have been using connect for a few years now, but with each update I find (connect 8, 9, etc), that the problems are getting worse. At this point I am just wasting time trying to convert into various formats using various codecs just trying to luck upon one where the video is at least without error.
What methods are others using to convert the FLV to a workable editable format?

Can't the FLV files be changed into many different formats through Apple's
Compressor or Adobe Media Encoder? These formats can then be opened in
standard video editing software for editing.
Best practice video conversion from download
mach5kel
to:
jsb152
05/21/12 01:03 PM
Please respond to jive-509399086-9dnu-2-2mvb7
Re: Best practice video conversion from download
created by mach5kel in Connect General Discussion - View the full
discussion
Yes, I use this as a last resort, as the quality of capture this was is
signifcatnly lower. As well as it is a much more time consuming process. I
sometimes have over 50 parts of 1 hour video. To use camtasia, you need
first to record it, then it must be saved in a camtasia format, and then
lastly rendered into avi or wmv. Therefore, it is does take awhile.
Really, I feel there shouldnt be so many errors in the conversion process,
but I am finding the FLV recordings themselves have problems. This last
file I am looking at, even the recording playback on adobe connect, has
serious issues with audio and video sync. A problem that is all too common
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/4426243#4426243]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/4426243#4426243]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Connect General Discussion by email or at Adobe
Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

H264 encoding settings - problems with FLV/F4V conversions and playback... HELP!!!

I do a lot of LIVE ENCODING and have been struggling with FMLE. I own the Adobe Creative Suite of applications and am pretty familiar with working with compatible/required formats, etc.
We have been primarily using VP6/mp3 for encoding. Most of our work is SD. We also always seem to have trouble when trying to encode the FLV file to another format, audio always seem to be out of sync, but sometimes it works...
Do you know why that would be regarding the FLV audio falling off sync when encoding to another format, such as MOV? Also, when we try to play back the FLV, the audio sounds garbled up and only plays well in Adobe Media Player.
I keep hearing H264 encoding will provide better video, but I just can't get that to work. Also, why is it that my entire CS4 suite of applications can't read or playback the F4V file- that's unacceptable from Adobe, just a big huge pain the butt... I've had to buy several cheapie applications to try and read F4V files and try to convert it, except that converting F4Vs seems to be a hit-or-miss.
What should I be using to playback and convert F4Vs? I also heard changing the extension to MP4 works, but I haven't seen that work, not even once. The cheap video conversion apps I have that read F4Vs are: FFMPEGX and Wondershare (Youtube). Sometimes they open F4V, but not most of the time...
I am using a super fast new Macbook Pro i7, 8GB ram (not the thunderbolt/usb3), CPU always runs smoothly and effectively.
Also, I always use the Canopus ADVC-110 as my transcoder. I do both video via Firewire IN or Composite IN, then Firewire OUT into the Mac encoder. FMLE sees it ok, but I wonder if this device might be my problem.
VP6 settings are as follows:
VP6 video / MP3 audio
300 to 500k video
30 fps
640x480 in/out
44100hz audio
56k audio
We want to start using H264 encoding settings, but in my experience trying it out, the output file is ALWAYS PROBLEMATIC. Also, when testing a live stream, the audio seems to fall off sync with the video.
I am looking for your recommendations on the H264 settings I should try. Most of my events are simple meetings with 1 to 5 speakers, mostly talking heads. We rarely encode high motion video, but I would also like to be able to adjust H264 settings for both talking heads and medium to high motion without (any) frame drops.
I have tried streaming to multiple/different Flash Media Servers, archived only to file, and H264 results seem always bad.
Any recommendations from professionals in the live streaming arena are much appreciated. I thank you for your time in advance.
Thank you!
Hugo

Hello Hugo
Sorry to know that you are facing these kind of issues, let me try to reply and understand issues one by one.
>>We have been primarily using VP6/mp3 for encoding. Most of our work is SD. We also always seem to have trouble when trying to encode the FLV file to another format, audio always seem to be out of sync, but sometimes it works...
-- Which application you are using to convert FLV to other format?
-- Is these any Audio - Video sync issue when you play FLV file in Adobe Media Player? if NO, it means FLV file created properly.
>> Do you know why that would be regarding the FLV audio falling off sync when encoding to another format, such as MOV? Also, when we try to play back the FLV, the audio sounds garbled up and only plays well in Adobe Media Player.
-- Which application you are using to convert FLV to MOV? if FLV playabck fine and without a/v sync issue, it should convert MOV with a/v sync.
-- It depend on audio codec selection by Media player or correct audio codec not installed for media player. Install appropriate audio codec to play in other media player if you dont want to play in Adobe Media Player.
>> I keep hearing H264 encoding will provide better video, but I just can't get that to work. Also, why is it that my entire CS4 suite of applications can't read or playback the F4V file- that's unacceptable from Adobe, just a big huge pain the butt... I've had to buy several cheapie applications to try and read F4V files and try to convert it, except that converting F4Vs seems to be a hit-or-miss.
>> What should I be using to playback and convert F4Vs? I also heard changing the extension to MP4 works, but I haven't seen that work, not even once. The cheap video conversion apps I have that read F4Vs are: FFMPEGX and Wondershare (Youtube). Sometimes they open F4V, but not most of the time...
-- Adobe Flash Media Server version 3.5 and later and Adobe Flash Media Live Encoder 3 can record content in MPEG-4 (F4V) format using an industry-standard recording technology known as "fragments" or "moof atoms." Some MPEG-4 compatible tools and players do not support moof atoms.
The F4V Post Processor tool aggregates the information from all the moof atoms into a single moov atom and outputs a new file." You can download the tool from above location: http://www.adobe.com/products/flashmediaserver/tool_downloads/
Thanks

Problems setting up video chat

I have an AIM account and use it with iChat and my friend has a .mac account that she uses with iChat. When we tried to set up a video conversation, it sends the invite and one of us accepts it starts to set up the video conversation. Then it stops and on her comupter is says "could not start becasue (her name) did not respond" and mine says "could not start because (my name) did not respond" when the coversation was initiated on one end and accepted on the other.

Hi ees86,
You state here you are using a OS level that is below the point where Apple introduced you seeing the error log.
You are having what people on 10.4.7 and above are referring to as the Error 8 problem.
This is about ports not being open as the simplest cause.
Check the Mac Firewall (System Preferences > Sharing > Firewall tab.
If it is On then set the ports as the second pic here
http://www.ralphjohnsuk.dsl.pipex.com/page4.html
Also check how you have those same ports opened in your modem.
If you are using Port Forwarding then it is likely the device is doing NAT as well.
There can be conflict with the way different devices do NAT.
If you have UPnP then switch to that.
It might be only one of you has to change
http://www.ralphjohnsuk.dsl.pipex.com/page15.html#CertainBuddy
Test with test accounts as well.
http://www.ralphjohnsuk.dsl.pipex.com/ContactTesters.html
If you have a modem and a separate router both should not be doing DHCP (Distributing IP adddreses to your LAN) as this causes SubNets that overlap.
Also iChat does not like it if two devices both do NAT based port openings. Use UPnP where you can.
2:02 PM Wednesday; January 31, 2007

Video conversion for N8

I've been trying to convert movies for my N8. So far, I couldn't get the right conversion factors such as the resolution, bitrate, frame rate, video codec, etc.
The videos I convert work on my N8 but the size always exceeds 1GB, and the video isn't in full screen.
Does anyone here knows the best video conversion setting for the N8?
Thanks in advance.
Solved!
Go to Solution.

Hey again 00RaiserTwo!
Here are the specifications regarding the Video for the N8, I hope this was what you where looking for.
Display:
360x640 pixels
Video Playback Performance:
encoding 25fps
decoding 30fps
File Formats:
H.264
MPEG-4, VC-1
H.263
Real Video 10
ON2 VP6
Flash video
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

Video Conversion Questions

Am having a couple of problems with video conversion for the Apple TV.
I had to reset and install OSX a few months back, now when I use FFMPEGX to convert some AVI files to H264 it is writing the audio and video as seperate files, cant understand why its suddenly doing this as worked fine before, anyone got any ideas?
Secondly, If I try to use Quicktime, Flip4mac writes that it was done with a trial version all over the video output, but I have the Pro Version of Quicktime so can't understand why it uses flip4mac at all, isnt Quicktime supposed to do this by itself, and is there a way round this, short of buying flip4mac?

when I use FFMPEGX to convert some AVI files to H264 it is writing the audio and video as seperate files
Sounds like FFMPEG is doing this. Check the source codecs and/or your default/manual settings. Some conversions may require an intermediate conversion in which the audio and video are first "demuxed" and placed in separate files which are them converted to the final compression formats and then merged to a single file.
Secondly, If I try to use Quicktime, Flip4mac writes that it was done with a trial version all over the video output, but I have the Pro Version of Quicktime so can't understand why it uses flip4mac at all, isnt Quicktime supposed to do this by itself, and is there a way round this, short of buying flip4mac?
While QT recognizes the AVI file container (i.e., AVI is not a compression format), you must have the same codecs to make the file (many combinations are possible) playable and/or convertible to a fully supported QT compression format. QT does not supply proprietary interleaved codecs and you must install your own. DivX, Flip4Mac, Perian, etc. all have codecs that play different codecs that may be contained in the AVI container. As long as there are no conflicts, then everything works fine. In some cases, however, two or more components may be able to play/convert the same codec. In this event, QT seems to call the handler which was last installed. If this is the case, then you may be able to remove/re-install codecs in a different order which satisfies your needs. In other cases, the codec in question may only be supplied one of the third-party providers and you have no choice but to use their product. Some of the providers allow you to play the codecs in question but require you to purchase conversion decoders and/or decoders separately. (E.g., DivX and Flip4Mac.) Whether or not you purchase these products depends on how badly you want to convert the file in question.

****Video Conversion For MACS, FINALLY!!!!!****

The best program for video conversion on the mac is ffmpegX.
www.homepage.mac.com/major4
Just download it and use the serial:
Name : In Memory of Uwedizo
Code : F00-1058-1369
However, i cant figure out how to work it, i am supplying this to people who might want a video converter for the new iPod Video for MAC Users, in return i would like to find out how they did it, Fair Deal or what!!!! Just email me back what settings, i should have it setup for!!! COOLIO!!!

MASSIVE PROBLEM!!!
DVD's NO LONGER MOUNT!!!!
DVD Player says "Supported disc not availible"
Disc utility says the volume is there. but its just a blank page instead of a disc.
Also,
tried the REAL player component for my bro's laptop, now quicktime has lost it's icon in the dock and application's window.
AND alomoost EVERY file that used to have quicktime now has VLC or a blank thing.... though quicktime still loads... however, his DVD player still works...
darn!

Losing Audio in Video Conversion m2ts mp4

I am using a video importing device and software that creates a "m2ts" file.   I can play the created "m2ts" file perfectly using VLC.
However, neither QuickTime 7 or QuickTime 10.3 will play this file.   When I tried to use MPEG Streamclip I was presented with a pop-up suggesting I need to purchase an additional plug-in, (which I am happy to do). It suggested I go here to purchase. http://www.apple.com/quicktime/mpeg2
I tried that, but was redirected here http://www.apple.com/quicktime/extending/components.html
I have no idea if the software I need is at this redirected website.
The plot thickens.   The importing software has the ability within it to convert video file to a mp4.   I tried that because I have found mp4 to be more compatible.
Unfortunately, I lose all audio (the video is perfect) when I try MPEG Streamclip or VLC. With QuickTime 10.3 I get perfect audio and video. So, I drag the mp4 file into iMovie 06 (aka iMovie HD) and it begins converting into something. When the conversion is complete the audio is gone!
I have dumped many mp4 files into iMovie 06, and never had a problem until now.
Thanks for reading, suggestions appreciated.

I thought I would report my progress. ( I have sound now, BUT !! )
I purchased a video conversion program from the Mac App Store.   It is called “AnyVideo converter HD". It is well reviewed.
So, I dropped in my "m2ts" file. I set the conversion to "Computer MOV 720p HD". "AnyVideo converter HD" converted a 1 minute video in about 15 seconds to a "mov".   The converted file had excellent picture quality and sound, it played perfectly using QuickTime.
Then the trouble started. When I dropped this 60 second clip into iMovie 06 (set for 720p) it's conversion process took 35 minutes ?!?!   The result was flawless! However, a two-hour video conversion would not be complete until about the time Capt. Kirk joins Starfleet.

Is my video conversation hacked?

Hi
I was having a video conversation with my gf and after that she has been getting random add requests from many people. This is scary because she never got any requests in the past and it started happening only after the video chat. I fear our conversation was hacked and recorded by some hacker. I also suspect that her machine was not completely secure as later when she tried to change her account information and privacy options, skype closed unexpectedly several times and changes didnt get saved. Although, she has an Antivirus installed and a complete scan yielded no suspicious virus/malware. I cant think of any other reason why a person at the other end of world is able to find her account.
I am really very scared that the video could be leaked on porn sites if it may have been recorded. Is there a way to ascertain this? Need help on this urgently.

dr.Dang wrote:
i do lot of video chat with my gf and sometime i type messages and send her but she dont see my messages on her screeen .....then she log out her account and then again she log in then i send messages again and then she can see them,,,,,, Is my video chat hacked ? or somebody else readin my messages? Plzzzz help meee i am very much worried
I also watched porn video whcih say "Skype call hacked" but i dont see the skype watermark on the video . So can my video chat also get hack!!!!!!!!? please Help meee out!!!!
no, most likely those were technical related problems, not signs of your account/calls/IMs is being hacked.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

MacBook Pro shuts off during video conversion/heavy CPU usage

I'm not quite sure how to troubleshoot this, and I'm curious if anyone has experienced this, or has any suggestions.
Whenever I do a video conversion, about 10 minutes in, my MacBook Pro just shuts off. Some examples of the kind of video conversions I'm doing are, exporting an EyeTV recording to iTunes, or converting a video already in iTunes to AppleTV or iPod/iPhone. Both of these examples are using Quicktime, I'm assuming?
I did a clean reinstall of Tiger, and the problem was still there. And, after upgrading to Leopard, the problem is still there.
Any suggestions?
Thanks!

Could be due to overheating. Install iStat Menus, show CPU use, CPU temp, and fan speed in the menu bar, and start converting. If CPU use is pegged, fans are at 6000 rpm, and temp rises to/above 90 C, then your MBP shuts off, that's the issue.
There are some early models of MBPs that had too much thermal paste, leading to excessive heat build up.

Problem in DAM video conversion

Similar Messages

Maybe you are looking for