Problem in data carrier "IDENTIFY FRONT END COMPUTER"

hello all
i am facing problem in data carrier creation for front end computer. actually i am creating data carrier type PC and i want set as default for all desktop. After DEFINE DATA CARRIER TYPE SERVER, FRONT END and Select PC and IDENTIFY FRONT END COMPUTER its shows following error
No entries found that match selection criteria
Message no. SV004
Diagnosis
No entries were found when importing data from the data base.
Procedure
If you have specified selection conditions, start the transaction again with conditions that are less restricted.
You can make new entries independently of this. To do this, select the function New entries in menu Edit.
help me

Hi Vivek,
In the SAP standard this entry are maintained only by the system
itself and they cannot be entered manually in transaction DC20. I can
only provide you the following information on the possible settings for
variable HOSTNAME and the DEFAULT frontend entry.
1. Default entry
   Call transaction 'DC20'. Double-click node 'Define data carrier type
   "server, front end"'. Select the respective data carrier type (e.g.
   'PC') and double-click node 'Identify frontend computers'. Click
   button 'Default entry' in the top right corner of the table control.
   Note that it is only possible to create 1 default entry!
2. System variable HOSTNAME
   If you run Windows XP, please go to Start -> Settings -> Control
   Panel. Double-click on 'System'. Click on tab 'Advanced' and then on
   button 'Environment variables'. Create system variable 'hostname' and
   assign a value'. Save the new variable.
As there is already a DEFAULT entry for frontendtype 'PC' it cannot be
maintained for another frontend type.
Best regards,
Christoph

Similar Messages

For disable any responsibility we are end date that from front end.

for disable any responsibility we are end date that from front end. what nay command from backend for disable the responsibilty.?

Refer the following thread
delete a responsability
Re: delete a responsability
Regards
-Mahesh

Problem with CRM 2011 web front end cluster

Hi.
We have a CRM 2011 (RU17) environment with a SQL DB server and 2 web front end CRM server in a cluster.
Since few days (about 10) it seems that one of the 2 nodes is not working, and since yesterday many users report access problems when calling the application by cluster name - as usual since we deployed CRM 1 year ago.
I tried myself, and I can run the application by cluster name without problems. If it try the separate notes addresses, one of them works, the other doesn't.
I checked the 2 web front end servers, and are (or seem) both properly configured, with all patches installed.
Following the information I got from Event viewer. Any suggestion welcomed!
Many thanks and Best regards
On the 'faulty' server I have different errors at event viewer level:
Faulting application name: Microsoft.Crm.Sandbox.HostService.exe, version: 5.0.9690.4150, time stamp: 0x53559982
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18229, time stamp: 0x51fb1677
Exception code: 0xe0434352
Fault offset: 0x000000000000940d
Faulting process id: 0x6f8
Faulting application start time: 0x01cf8f93aa9a7ff8
Faulting application path: C:\PROGRA~1\MICROS~4\Server\bin\Microsoft.Crm.Sandbox.HostService.exe
Faulting module path: C:\Windows\system32\KERNELBASE.dll
Report Id: f5019a68-fb86-11e3-9f21-005056853970
Application: Microsoft.Crm.Sandbox.HostService.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.Runtime.InteropServices.COMException
Stack:
   at Microsoft.Crm.Sandbox.HostService.InitializeThreadProc(System.Object)
   at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
The Sandbox Host service has encountered an unexpected error and has stopped.
Source: Microsoft.Crm.Sandbox.HostService.exe (1784)
Error: System.Runtime.InteropServices.COMException (0x8007203A): The server is not operational.
   at System.DirectoryServices.DirectoryEntry.Bind(Boolean throwIfFail)
   at System.DirectoryServices.DirectoryEntry.Bind()
   at System.DirectoryServices.DirectoryEntry.get_AdsObject()
   at System.DirectoryServices.PropertyValueCollection.PopulateList()
   at System.DirectoryServices.PropertyValueCollection..ctor(DirectoryEntry entry, String propertyName)
   at System.DirectoryServices.PropertyCollection.get_Item(String propertyName)
   at Microsoft.Crm.SecurityUtils.GetSidFromAD(Guid objectGuid)
   at Microsoft.Crm.Sandbox.SandboxHost.SetPrivilegeUserGroupId(Guid privilegeUserGroupId)
   at Microsoft.Crm.Sandbox.HostService.InitializeThreadProc(Object stateInfo)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
On the 'running' server event viewer I only have one error, related to mail router:
#23379 - Could not verify the version of Microsoft Dynamics CRM at http://alkcg106.d30.intra:5555/AkzoNobelIndustrialCoatings. There was no endpoint listening at http://alkcg106:5555/AkzoNobelIndustrialCoatings/XRMServices/2011/Organization.svc that could
accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.

Apologize for not having indicated here the resolotion I got thanks to MS support...
We enabled the trace and we got
a http error page stating maxQueryStringLength was insufficient. We changed the maxQueryStringLength and QueryString values in the CRM web.config value to 10240.
We also noticed an error related to the DC being unavailable. We checked in the CRM registry hive and see in the non-working server you had a PreferredDc key pointing to “AMDNAD”. On pinging
AMDNAD we see it is not reachable. We removed the PreferredDc key and after iisreset we can navigate to crm.

How to check plan while processing the data in the front end

I have a batch processing which is executed through front end(forms).during processing,based on the input i am calling a stored procedure.i would like to check the execution plan for this procedure when executed through front end.
kindly help me on this.

have a look on below links:
When your query takes too long ...
DBMS_PROFILER
http://www.databasejournal.com/features/oracle/article.php/2197231
http://www.oracle-base.com/articles/9i/DBMS_PROFILER.php

Problems with one of the front-end servers (service wont start)

Hi,
Having a pool with two front-end servers (Lync Server 2013 on Windows Server 2012) and I cannot get one of servers to work properly.
The Front-End service is not starting.
Have removed both servers from the topology and installed one at the time. When adding the second server to the pool the service never starts, its in starting state and a bunch of error messages appears:
- Server startup is being delayed because fabric pool manager is initializing.
Cause: This is normal when Pool is bootstrapped and indicates that the Front-End is waiting for a quorum of other Front-Ends to be started.
- Pool Manager failed to connect to Fabric Pool Manager.
Cause: This could happen because insufficient number of Front-Ends are currently active in the Pool.
I have tried restarted one at the time, both at the same time...
Reset-CsPoolRegistrarState -ResetType QuorumLossRecovery
Reset-CsPoolRegistrarState -ResetType FullReset
I have also had a look at the kb saying that there could be a certificate issue. So I have ran that script but no certificate is misplaced in any store.
I have removed the front-end certificates and requested new ones from the internal CA, I have also done the same to the OAuth certificates.
How to proceed?

Hi there,
if you are still receiving, the same error, please try to shutdown the first Front-End Server, and give time for the services to start, however I would like also to add that with Lync server 2013 the Enterprise pool requirements is to have 3 Front-End Servers
in a pool instead of 2, because of introducing the brick model architecture.
Regards,
Charbel Hanna
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Can i download and install again the adobe software without problem the data i got on my computer?

i download the adobe design and web pre 6
i can not use the adobe acrobat x pro
shuld i redownload and reinstall the adobe?
can this make any damage the previous install or data?
thans
yosi tzik

thanks evry one
i did the reinstall
thank you !!
yossi

Updating master data for time dimensions from front end

Hi Experts,
I am sure this must be handled in a very straight forward way. Just want to know the best practice here. We are working on a copy of appset and want to completely revamp the time dimension papers as per client's fiscal year which is april to march every year.
When we have deleted all the existing memebers from the time dimension master data from BPC front end and replaced with new memebers, the task is getting completed successfully.
But when I check back in BI for the master data, it has not replaced all the existing members. How best to handle this?
The transaction data is deleted from all the application cubes. Are there any checks to be performed?
Thanks,
Santosh

Closing the thread as I could not replicate the problem. The problem is resolved.
Thanks,
Santosh

Front end printing with control technology problem with Mac platforms

Hello,
We are looking into replacing Host Spool Access method "F: Printing on front end computer" with the newer "front end printing with control technology" but are running into an issue. Our Mac platforms cannot print duplex nor print multiple pages per side using the new technology. We have followed SAP's recommendation to use the POST2 device type but it still won't allow full printing functionality. Has anyone run into this and if so how did you overcome it?
Thanks and Regards,
Rich

Hi Rich,
I've had success getting duplex printing through "front end printing with control technology" with the Mac SAPgui as follows:
In the Mac SAPgui, go to the Preferences window and select Printing (i.e. Preferences -> Desktop -> Printing).
In the "Media sides" pull-down menu, select one of the "two-sided" choices (such as "two-sided-long-edge").
Click the "Save" button at the bottom of the window (near the right hand side.
Print to a Front end printer.
I haven't figured out how to get n-up printing.
/David Rosenberg

DMS data carrier configuration

I'm working with 4.0B and I have configured data carrier for my PM users. The problem is that it does not work:
User requirement: to attached document from LAN via CV01.
I have done the following:
1. Identify front-end computers
DATA CARRIER - default
TYPE (DATA CARRIER ) - w1
NET ADDRESS - default
DESCRIPTION - default for local pc
2. Define mount points/ logical drive
DATA CARRIER - ML_PM
TYPE (DATA CARRIER) - w1
PREFIX FOR ACCESS PATH-
mlavofn1\Organization\Field Operations\PMDir\
legend: mlavofn1 is LAN server and the rest the files directory.
The whole length of the configuration is less than 70 characters.
Error:
mlavofn1\Oragnization\Field Operations\PMDirl\:
which comes with 3 additional characters l\: at end of the string.
message no is 26 136 and when I checked for note, 26 136 basically meant for access path more than 70 characters.
My question is whether my configuration is correct or not??. if correct then it could a bug or other factors.
Appreciate advise on my configuration.
Thanks

HI Marcos,
While in DC20 please see the small blue help button for more information on define data carrier also the below link may provide you some additional useful information.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c27b643c711d1893e0000e8323c4f/content.htm
Regards
Dermot

How to define data carrier?

Dear colleagues,
I am trying to use DMS and when defining data carrier I deleted the default configuration "Identify front end computers" for NT type. Now, is not being possible to back the standard configuration.
I click in "default entry" but the system selects automatically data carrier type "Se" and displays the following message:
Corresponding entry in "Define data carrier type "server, front end"" missing
Actually, the type "Se" does not exist, but why the system are selecting this instead NT?
Thanks in advance?
Marcos

HI Marcos,
While in DC20 please see the small blue help button for more information on define data carrier also the below link may provide you some additional useful information.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/1c27b643c711d1893e0000e8323c4f/content.htm
Regards
Dermot

Front End not reflecting previously deleted entry while entering into Staging table

Lets say I have table named 'Sales' as my Source. It contains columns Sal_ID and Sal_DESC
There is Front End Entity created as Master Sales in Model Project. According staging table in database is ' stg.Sales_Leaf '.
Now, I have entered data into stg.Sales_Leaf from Sales table for 'CODE' and 'NAME' value as Sal_ID and Sal_DESC, and my ImportType is '0'.
As Sales table contains 23 rows, these are imported to stg.Sales_Leaf with ImportType '0'.
I am able to see it in Front End also.
Problem starts now. I delete some rows from Front END directly which contains CODE value as 22 and 23.
These gets deleted from Front End View, but now again I load Same 23 rows to stg.Sales_Leaf with same data (after truncating it).
I should be able to see 23 records in Front End, but it is showing only 21 records.
Two records with CODE value as 22 and 23 are not reflecting in Fornt End.
I think it is because 'mdm.<table_code>' table associated with stg.Sales_Leaf, is reflecting Status_ID as 2.
Please provide the way, how can I get data reflected in Front End.

All error numbers between -20000 and -20999 are not Oracle errors but rather application errors coded by whoever wrote your software.
As previously suggested ... see your DBA or manager.

Lync Server Front End 2 Hardware Load Balancer IP

I currently have the following Setup.
I only have 1 Hardware Load Balanced IP for my Front End Pool.
After running the Lync Planning Tool it actually states that i need 2 Hardware Load Balanced IP, 1 for internal and 1 for external.
My question would be would i be able to configure for mobility and external access with just using 1 Hardware Load Balanced IP?
Because i seem to have problem with connecting to the front end server based on the following scenario.
Without Reverse Proxy Mapping (port 80/443 internet to port 80/443 reverse proxy to port 80/443 lyncpool frontend)
Internal Access (No Issue)
Lync Mobile 2013 App (Can Connect and chat but intermittent connection) *gets disconnected if i access video/audio
Lync Client 2013 Externally (Cannot Connect to Server)
https://meet.domain.com (working)
With Reverse Proxy Mapping (Port 80/443 internet to port 8080/4443 reverse proxy to port 8080/4443 lyncpool frontend)
Internal Access (No Issue)
Lync Mobile 2013 App (Cannot connect)
Lync Client 2013 Externally (Cannot connect)
https://meet.domain.com (Not working)
Would i actually need to have a additional front end pool IP for external access? or can i maintain it as it is?
I do not understand why without the mapping it can work whereas if i do the mapping according to technet article it won't work.
Everything is running windows server 2012 R2 and Lync 2013, Loadbalancer / Reverse Proxy is the same F5 Appliance
Any assistance on this is greatly appreciated.

Hi Greg,
I have been making use of it (https://testconnectivity.microsoft.com/) to test my autodiscover and remote
access.
Like i mentioned it is weird that without doing port mapping from 80/443 to 8080/4443 i was able to pass
the autodiscovery and all but once i changed to the proper steps to do port mapping it stopped working.
and im not using TMG but using a F5 Hardware Reverse Proxy which also happen to be my Load Balancing Appliance.
Is there anyone who can help give me more details if i need 2 VIP for the front end ?

How to view logs from browser/front-end without using Visual Admin

Hi,
Is there a way to view logs from the front-end computer without looging into the Visual Admin tool either in the browser or using some stand-alone application.
Thanks,
CD

Hi,
You can use http://ipaddress (or) fqdn :5xx00/NWA
use monitoring and logs option you will view logs.
Regards,
Vamshi.

I can view the data in front end form, but data is not avilable in backend

Hi,
i created a form with three blocks.In first block i entered the data.Based on the data it will fetch recodrs from A & B tables and insert into C table.This logic i have written in backend and put commit in front end and back end. In the 2nd block iam using C table. i can view the data in front end(C table) . But i unable to
see the data in C table when i go and see in back end.
Form is used for only querying purpose. for the C block insert allowed and update allowed is false.
Plz do the need ful

Please try and post sufficient information for someone to replicate your problem. We are not looking over your shoulder and do not have access to your database.
We need a minimum table structure, example data, a walk-through of how the form works - you mention 3 blocks and only half-way describe 1. Is another for the C block? Or is that a different form?
e.g. Enter search data in Block A. Execute Query. Blocks A and B populated with data from database tables based on FK relationship B to A. User presses Save button, procedure in form updates table C based on data in form and issues commit. Execute Query in Block C retrieves just inserted data in table C.
Is that remotely what's happening? Or something completely different?

Data from Front end to Back end of ALV Grid

Hi Experts,
I developed interactive ALV for maintaining master data for some BW Objects. I also included custom F4 for all fields.
Problem:
When entered new record or modified a record by using F4 help of fields, it doesn't work properly. For collecting front end data i wrote below specified code.
for new record insert.
METHOD handle_data_changed.
    DATA: mod_cell        TYPE lvc_s_modi,
          del_row TYPE lvc_s_moce,
          del_index TYPE i,
          new_index TYPE sy-tabix.
    DATA:   l_assum TYPE /bic/pzassum-/bic/zassum,
            l_assum_modl TYPE /bic/pzassum-/bic/zass_mdl,
            l_assum_typ TYPE /bic/pzassum-/bic/zass_typ,
            l_drv_assum TYPE /bic/pzassum-/bic/zdriver,
            l_infl_assum TYPE /bic/pzassum-/bic/zinflate,
            l_sht_text TYPE /bic/tzassum-txtsh,
            l_mdm_text TYPE /bic/tzassum-txtmd.
    CLEAR error_record.
IF e_onf4 IS INITIAL.
******Get Inserted Data from Frontend
   CALL FUNCTION 'MESSAGES_INITIALIZE'.
    IF er_data_changed->mt_inserted_rows IS NOT INITIAL.
      IF er_data_changed->mt_mod_cells IS NOT INITIAL.
       REFRESH : gt_inserted_data,gt_inserted_text.
        LOOP AT er_data_changed->mt_mod_cells INTO mod_cell.
          CALL METHOD er_data_changed->get_cell_value
            EXPORTING
              i_row_id    = mod_cell-row_id
              i_fieldname = '/BIC/ZASSUM'
            IMPORTING
              e_value     = l_assum.
          wa_changed_data-/bic/zassum = l_assum.
          CALL METHOD er_data_changed->get_cell_value
            EXPORTING
              i_row_id    = mod_cell-row_id
              i_fieldname = '/BIC/ZASS_MDL'
            IMPORTING
              e_value     = l_assum_modl.
          wa_changed_data-/bic/zass_mdl = l_assum_modl.
          CALL METHOD er_data_changed->get_cell_value
            EXPORTING
              i_row_id    = mod_cell-row_id
              i_fieldname = '/BIC/ZASS_TYP'
            IMPORTING
              e_value     = l_assum_typ.
          wa_changed_data-/bic/zass_typ = l_assum_typ.
          CALL METHOD er_data_changed->get_cell_value
            EXPORTING
              i_row_id    = mod_cell-row_id
              i_fieldname = '/BIC/ZDRIVER'
            IMPORTING
              e_value     = l_drv_assum.
          IF sy-subrc = 0.
            wa_changed_data-/bic/zdriver = l_drv_assum.
          ENDIF.
          CALL METHOD er_data_changed->get_cell_value
            EXPORTING
              i_row_id    = mod_cell-row_id
              i_fieldname = '/BIC/ZINFLATE'
            IMPORTING
              e_value     = l_infl_assum.
          IF sy-subrc = 0.
            wa_changed_data-/bic/zinflate = l_infl_assum.
          ENDIF.
          CALL METHOD er_data_changed->get_cell_value
            EXPORTING
              i_row_id    = mod_cell-row_id
              i_fieldname = 'TXTSH'
            IMPORTING
              e_value     = l_sht_text.
          IF sy-subrc = 0.
            wa_changed_text-txtsh = l_sht_text.
          ENDIF.
          CALL METHOD er_data_changed->get_cell_value
            EXPORTING
              i_row_id    = mod_cell-row_id
              i_fieldname = 'TXTMD'
            IMPORTING
              e_value     = l_mdm_text.
          wa_changed_text-txtmd = l_mdm_text.
          APPEND wa_changed_data TO gt_inserted_data.
          wa_changed_text-/bic/zassum = wa_changed_data-/bic/zassum.
          APPEND wa_changed_text TO gt_inserted_text.
        ENDLOOP.
        DELETE ADJACENT DUPLICATES FROM gt_inserted_data.
        DELETE ADJACENT DUPLICATES FROM gt_inserted_text.
      ENDIF.
For Modified Record
IF er_data_changed->mt_mod_cells IS NOT INITIAL AND
              er_data_changed->mt_inserted_rows IS INITIAL.
     REFRESH : gt_modified_text,gt_modified_data.
     REFRESH : gt_valid_text,gt_modified_text.
      LOOP AT er_data_changed->mt_mod_cells INTO mod_cell.
        row_index = mod_cell-row_id.
        CALL METHOD er_data_changed->get_cell_value
          EXPORTING
            i_row_id    = mod_cell-row_id
            i_fieldname = '/BIC/ZASSUM'
          IMPORTING
            e_value     = l_assum.
        wa_changed_data-/bic/zassum = l_assum.
        CALL METHOD er_data_changed->get_cell_value
          EXPORTING
            i_row_id    = mod_cell-row_id
            i_fieldname = '/BIC/ZASS_MDL'
          IMPORTING
            e_value     = l_assum_modl.
        wa_changed_data-/bic/zass_mdl = l_assum_modl.
        CALL METHOD er_data_changed->get_cell_value
          EXPORTING
            i_row_id    = mod_cell-row_id
            i_fieldname = '/BIC/ZASS_TYP'
          IMPORTING
            e_value     = l_assum_typ.
        wa_changed_data-/bic/zass_typ = l_assum_typ.
        CALL METHOD er_data_changed->get_cell_value
          EXPORTING
            i_row_id    = mod_cell-row_id
            i_fieldname = '/BIC/ZDRIVER'
          IMPORTING
            e_value     = l_drv_assum.
        IF sy-subrc = 0.
          wa_changed_data-/bic/zdriver = l_drv_assum.
        ENDIF.
        CALL METHOD er_data_changed->get_cell_value
          EXPORTING
            i_row_id    = mod_cell-row_id
            i_fieldname = '/BIC/ZINFLATE'
          IMPORTING
            e_value     = l_infl_assum.
        IF sy-subrc = 0.
          wa_changed_data-/bic/zinflate = l_infl_assum.
        ENDIF.
        CALL METHOD er_data_changed->get_cell_value
          EXPORTING
            i_row_id    = mod_cell-row_id
            i_fieldname = 'TXTSH'
          IMPORTING
            e_value     = l_sht_text.
        IF sy-subrc = 0.
          wa_changed_text-txtsh = l_sht_text.
        ENDIF.
        CALL METHOD er_data_changed->get_cell_value
          EXPORTING
            i_row_id    = mod_cell-row_id
            i_fieldname = 'TXTMD'
          IMPORTING
            e_value     = l_mdm_text.
        wa_changed_text-txtmd = l_mdm_text..
        APPEND wa_changed_data TO gt_modified_data.
        wa_changed_text-/bic/zassum = wa_changed_data-/bic/zassum.
        APPEND wa_changed_text TO gt_modified_text.
      ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM gt_modified_data.
      DELETE ADJACENT DUPLICATES FROM gt_modified_text.
    ENDIF.
Custom F4 is working properly.
Below i am specifing one test case which is my program failed.
i entered 2 new records by choosing F4 help. The 2nd record only inserted in data base.
Please help me....
Thanks in Advance

Hello Siva
Some people like to do extensive coding in the event handler method for DATA_CHANGED.
I do NOT belong to these people.
My recommendation is (almost) always the same:
- If required store values in (static) attributes of your event handler class / instance
- Trigger PAI (using method CL_GUI_CFW=>SET_NEW_OK_CODE)
At PAI of your screen you can now easily work with your OUTTAB itab used for the ALV list.
Regards
Uwe

Problem in data carrier "IDENTIFY FRONT END COMPUTER"

Similar Messages

Maybe you are looking for