Problem in data coming to PI system from SAP?

Hello All,
I facing problem with the data coming from SAP system to PI system.
in VT02n give the shipment number and after that create some thing and trigger an IDOC.
when the data come to PI system, i checked in moni i saw that data getting mixed.
means for example:
IDOC data in we19:
data1 --- abcdef
data2----12345.00
When i check idoc data in PI moni:
<data1> abcdef 1<data1>
<data2>2345.00<data2>
where and how the data in second tag coming into first tag. where this can happen.
any one faced this kind of problem, please let me know.
Thanks and Regards,
Chinna

problem solved, i have not imported latest meta data into PI in idx2.
now i have done it, now its working fine.

Similar Messages

Distribute different versions of data to 3rd party systems from SAP ERP2004

Dear fellow SDN users
I am working in a large retail company where we are about to implement a new store system. The new system should be implemented in phases, where each phase covers one or multiple countries. Until the implementation is complete, our old store system should still be supported.
My problem is that we also need to support multiple versions of the systems, which is something we have never done before. Do any of you guys have any experience in how to differentiate versions of the data being sent from SAP to 3rd party systems? The scenario today is:
SAP ECC 6.0 -> SAP PI 7.0 -> STORE SYSTEM1
And the scenario we would like in the future:
SAP ECC 6.0 -> SAP PI 7.0 -> STORE SYSTEM1/STORE SYSTEM2
(Where it is possible to send several versions of data: e.g. ARTMAS ver. 1 to SYSTEM1 and ARTMAS ver. 2 to SYSTEM1 and ARTMAS ver. 1 to SYSTEM2)
The first thing that came to my mind was to differentiate on IDOC extension and then program different routines per extension when sending the idocs, but I guess there should be an easier way.
Any idea is greatly appreciated.
Best regards,
Chris

Hi Chris
I guess it depends on how the information you want to send to various partner systems differs, but have you considered using reduction?
I am at a client currently where we need to send similar information to a number of systems - for example Customer information using the DEBMAS message type, is going to three seperate systems.
To do this we defined 3 reduced messages - Tcode BD53. This not only reduces the load placed on PI/whatever middleware system is used by eliminating unnecessary data from each message variant, but allows the message to be treated differently by PI, using different data mappings, distribution models etc.
Hope this helps

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

Fm for calling save dialouge box to save file in a system from sap

fm for calling save dialouge box to save file in a system from sap
Step by step of its usage pls,
thank you,
Regards,
Jagrut BharatKumar Shukla

hi
FM is
POPUP_TO_DECIDE_LIST
USAGE:
CASE r_ucomm.
WHEN 'SAVE'.
DATA: l_answer." no need to specify type
DATA: t_spopli LIKE spopli OCCURS 0 WITH HEADER LINE.
t_spopli-varoption = 'PDF'.
APPEND t_spopli.
t_spopli-varoption = 'EXCEL'.
APPEND t_spopli .
CALL FUNCTION 'POPUP_TO_DECIDE_LIST'
 EXPORTING
* CURSORLINE = 1
* MARK_FLAG = ' '
* MARK_MAX = 1
* START_COL = 0
* START_ROW = 0
 textline1 = 'SELECT THE FORMAT OF THE OUTPUT'
* TEXTLINE2 = ' '
* TEXTLINE3 = ' '
 titel = 'SAVE AS'
* DISPLAY_ONLY = ' '
 IMPORTING
 ANSWER = l_answer
 tables
 t_spopli = t_spopli
 EXCEPTIONS
 NOT_ENOUGH_ANSWERS = 1
 TOO_MUCH_ANSWERS = 2
 TOO_MUCH_MARKS = 3
 OTHERS = 4 .
 IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
IF l_answer = '2'.
CALL FUNCTION 'GUI_DOWNLOAD'
endif.
regards
ravish
plz dont forget to reward points if helpful

Call to Web Sevice in External (non SAP) system from SAP CRM

Hi,
I have to make a call to External system from SAP CRM 5.0 system. The external system will provide a sample webservice which SAP will try to initiate
Can you please tell me:
1. What settings/object needs to be maintained in SAP in order to make this call.
2. how I can make a call to this Web-Service from a BADI and pass the values to web service and also capture the returning value.
Please explain in detail
Thanks,
Mike

Hi Oliver,
I have gone through the documentation and had been able to create a proxy object, uploaded the WSDL file (from local directory) and created logical port,
However, when testing the service, I didn't received a sucess message but
<CX_AI_SYSTEM_FAULT>
<CODECONTEXT>Local</CODECONTEXT>
<CODE>ERROR_WEBSERVICE_RUNTIME_INIT</CODE>
<ERRORTEXT>Error when instantiating the Web service runtime (Error when initializing SOAP client application: ' error_text' )</ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
What might be the Problem ?

How to call an EXE file on a remote system from SAP system?

Hi Friends,
I want to execute an EXE file existing on the remote system from SAP system. Could some one give me an idea of how to execute that?
Thanx in advance,
Ram

Hi Ram,
Try this
SXPG_COMMAND_EXECUTE
Reward if this helps,
Satish

Problem to run the Crystal report inside from SAP B1 based on SQL views.

Hello,
I have a problem to run my Crystal report inside from SAP B1 which is based on SQL views.And the SQL views are stored in a separate database in SQL server.The error which i am getting is saying the the tablename does not exist.What i need to do in order to sort this problem.
Great if somebody can help me to sort out this so that i can run my report based on SQL views stored on separate database other than SAP databases inside from SAP B1.
Edited by: rozenagrawal on Apr 19, 2011 11:51 AM

Try using a SQL synonym in your company database for the views outside the company database. I don't know if SBO will let you get away with it, but its worth a shot.
If your company database is MyCompany and you have a view called MyView in Views database, assuming the view belongs to schema dbo, and you want the synonym to belong to dbo schema in your company database, run this:
Use MyCompany
go
create synonym dbo.OutsiderView for
Views.dbo.MyView
go
select * from OutsiderView
The select statement should return the contents of MyView in the Views database while you are connected to your MyCompany database.
For more info, see the Books Online for MSSQL on topic synonym.
You will need to change your CR options to include displaying synonyms along with tables, views, etc. You may also need to grant select to B1 users.
Edited by: Cindy Lange on Apr 21, 2011 4:00 PM

Call to Web Sevice in external system from SAP CRM

Hi,
I have to make a call to External system from SAP CRM 5.0 system. The external system will provide a sample webservice which SAP will try to initiate
Can you please tell me:
1. What settings/object needs to be maintained in SAP in order to make this call.
2. how I can make a call to this Web-Service from a BADI and pass the values to web service and also capture the returning value.
Please explain in detail
Thanks,
Mike

Mike,
You should honestly search the SDN site for consuming web services with ABAP. There are some good examples.
However the general procedure is easy:
1. Generate an ABAP proxy using the WSDL provided to you by the external program
2. Configure an HTTP destination for the server of the web services (needed for HTTPS calls)
3. Configure the logical port for the web service using lpconfig
4. Write the abap code to call the webservice via the proxy. Works very similar to FM call in my opinion.
To expose a webservice(bapi being called from outside) you need to do a little more work
1. Create a web services for the RFC enabled function module via SE80
2. Use wsadmin and wsconfig to make the service available
3. Publish the service out to the UDDI as needed.
Once again this code is pretty well documented in the standard help and SDN. Do a simple search on ABAP proxies and you will find what you need.
Take care,
Stephen

Call to webservice External (non sap) system from SAP CRM

Hi,
I have to make a call to External system from SAP CRM 5.0 system. The external system will provide a sample webservice which SAP will try to initiate
Can you please tell me:
1. What settings/object needs to be maintained in SAP in order to make this call.
2. how I can make a call to this Web-Service from a BADI and pass the values to web service and also capture the returning value.
Please explain in detail
Thanks,
Mike

Hi,
Check this
Calling web service from ABAP - version 4.6C

How to stop start SAP system from SAP transactions?

Hi Experts,
How can i stop start the SAP system from SAP screens? Are there any transaction for this need?
thanks,
philaphi

Hi,
Use Tcode RZ03 --> Control --> Stop SAP Instance.
Best Regards,
Sachin.

Compare dates coming form Source system & update higher one in target syste

hi all,
 Mt reqt is to compare dates coming from source system & update highere one
Ex--) E1EDP01 has been repeated 3 times in Idoc segemnt E1EDP20 , then date with higher one need to be updated in target system
like 14/12/08
 15/12/08
 16/12/08
Here 16/12/08 need to be updated first & then the other ones one by one.
Anybody guide me in comparing these dates functionality .
Send me the code !
Regards
Chaithanya

Hi Michael,
 I was unable to trace the exact issue of how to track E1EDP01 Dates & compare it.
I had created UDF to compare dates coming from E1EDP01 Segment
following is my code --->
// This UDF return 1 value for highest date and 0 for not highest date.
DateFormat mydateformat = new SimpleDateFormat("ddMMyyyy");
Date mydate1 = null;
Date heightDt = null;
for (int i=0; i <a.length; i++)
if (a.equals(ResultList.CC)) continue;
try{
 mydate1 = mydateformat.parse(a);
 if (i==0)
 heightDt = mydateformat.parse(a);
 if (heightDt .before(mydate1))
 heightDt = mydate1;
catch(Exception e){}
//result.addValue( mydateformat.format(heightDt));
for (int i=0; i <a.length; i++)
try{
mydate1 = mydateformat.parse(a);
if (heightDt .equals(mydate1))
result.addValue( "1");
else
result.addValue( "0");
catch(Exception e){}
My Problem here is in my Idoc if there are Multiple E1EDP20 segments & here date would be repeated 4 times . I have to compare highest date out of 4 & send it to the target system.
which I have done it, but here my problem is the segment E1EDP01 is repeated & iam unable to find highest date individually to the node level.
Sorry I should have explained this before only.
Can Anyone guide me in comparing the date at segment level.
Regards
Chaithanya

Meet a problem of data exchange for sale order from CRM to R3.

Dear Friends:
 I do the data exchange for sale oder from to R3 today , the problem's detail is as follows:
 When i save a sale order in CRM (Version is 5.0) . it can automatically generate a bdoc which bdoc type is BUS_TRANS_MSG. but the bdoc status alway is "Sent to receivers (not all have confirmed)". and the original order in CRM can not be change .it quote that "Document is being distributed - changes are not possible", so i check the order status analysis in detail .it presents two error messages ," Event 'BEFORE_CHANGE', attribute ' FINI': Error code for function module 'CRM_STATUS_BEFORE_COMPLETED_EC' , "Item is not yet completed in OLTP system". so i check the order in R/3 ,it has already been create and without any error messages.
 Would like to tell me how to solve it . thanks your any idear..

Hi Benjamin,
When performing uploads to R/3 from CRM there is a response from the OTLP system that is sent back to the CRM Middleware to confirm that the data records were received and processed correctly.
Here is a checklist you can run through to verfiy that the connections, systems and objects that are needed are all in place:
On R/3 system:
- Check R/3 outbound queue (transaction SMQ1) for any entries that are not reaching CRM.
- Check that all RFC destinations on R/3 are defined correctly and are pointing to CRM
- Check the CRMCONSUM table in R/3 to ensure CRM is registered as a consumer
- Check the CRMRFCPAR table in R/3 to ensure that order objects are valid for exchange between R/3 and CRM
- Check for any short dumps in R/3 (ST22/ST21)
On CRM:
- Are there entries stuck in the inbound queue (SMQ2) with R3AU* names?
- What does the CRM Middleware Trace show (SMWT)? Sometimes this has more detail than the specific BDoc overview (SMW01)
- Check for short dums in CRM (ST22)
Let us know what else you uncover and we can work from there.
Brad

Error sending data to an SCMTM system from an R3 system

Dear Friends
I am trying to send an Idoc from R3 system to an SCMTM system.
I have imported the idoc, message mapping is preconfigured from SAP and requisite configurations in ID have been completed.
I am getting this error in sxmb_moni when I use FTP adapter to post the data to SCMTM system:(it is showing as processed successfully)
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_OUTBINDING_NOT_FOUND</SAP:Code>
<SAP:P1>,BS_TM7_100</SAP:P1>
<SAP:P2>,BS_ECV_350,,</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver agreement found for sender ,BS_TM7_100 to receiver ,BS_ECV_350,,</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I tried to do this with Idoc receiver adapter but it was giving this following error in Call adapter:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_WRONG_INTF</SAP:Code>
<SAP:P1>ShipmentRequestRequest_In</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Unable to interpret IDoc interface ShipmentRequestRequest_In</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Do we have to use some other way of sending data to SCMTM system?or what should we use?
Do we have to suppress any acknowledgements in IDXNOALE,then please give me the steps for it
Please help.
Thank You
Warm Regards
Arjun Ghose
Edited by: Arjun Ghose on Apr 7, 2009 10:48 AM

Hi Rajesh
Found the problem in Receiver agreement/Operation Mapping /Message Mapping after running the test:
Operation Mapping
DESADVDELVRY03_2_ShipmentRequestRequest
Runtime error
Runtime exception occurred during application mapping com/sap/xi/tf/_DESADVDELVRY03_to_ShipmentRequestR~; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Parsing an empty source. Root element expected!
... (136 lines)
In message mapping I tested, but it gave no error.In Operation Mapping there was error:
18:19:04 Start of test
RuntimeException during appliction Java mapping com/sap/xi/tf/_DESADVDELVRY03_to_ShipmentRequestRequest_
com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:ShipmentRequestRequest. Values missing in queue context. Target XSD requires a value for this element, but the target-field mapping does not create one. Check whether the XML instance is valid for the source XSD, and whether the target-field mapping fulfils the requirement of the target XSD at com.sap.aii.mappingtool.tf7.AMappingProgram.processNode(AMappingProgram.java:366) at com.sap.aii.mappingtool.tf7.AMappingProgram.start(AMappingProgram.java:496) at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:133) at com.sap.aii.mappingtool.tf7.AMappingProgram.transform(AMappingProgram.java:626) at com.sap.aii.ib.server.mapping.execution.JavaMapping.executeStep(JavaMapping.java:92) at com.sap.aii.ib.server.mapping.execution.Mapping.execute(Mapping.java:60) at com.sap.aii.ib.server.mapping.execution.MappingHandler.map(MappingHandler.java:87) at com.sap.aii.ib.server.mapping.execution.MappingHandler.map(MappingHandler.java:54) at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:139) at com.sap.aii.ibrep.server.mapping.exec.ExecuteIfMapCommand.execute(ExecuteIfMapCommand.java:33) at com.sap.aii.ib.server.mapping.exec.CommandManager.execute(CommandManager.java:43) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:40) at com.sap.aii.ibrep.server.mapping.MapServiceBean.execute(MapServiceBean.java:40) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1579_10000.execute(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.rmi_p4.P4DynamicSkeleton.dispatch(P4DynamicSkeleton.java:234) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351) at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62) at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37) at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53) at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
18:19:05 End of test
I could not make out where is the problem .Please help.

Unable to import idoc into PI 7.0 system from SAP r/3 system

Hi Experts,
    I am getting an error while importing an Idoc structure from SAP r/3 system. The error says "unable to read Idoc segments". The Idoc has recently undergone changes. When We are looking at the struture of idoc through IDOCSYN table it is showing updated structure in SAP R/3 system but import to SAP XI is failing.
Can you suggest some way to tackle this kind of problem.
regards
Anupam

Hi Francis,
   This was indeed an authorization issue. Thank you so much for your valuable suggestion. The user lacked proper authorization to import the idocs.
Hi All,
    Thank you for all your support.
Regards
Anupam

Invoice status to third party system from sap

Hi All,
Could you please suggest me either to use functional module or bapi or badi so that i can send the invoice status from SAP to third party sytem.
Thanks in advance for the response

Hi,
Invoice status can be sent to an external system based on IDOC or through an interface with proper program.
For IDOC related stauts message do refer the below it may help you ..
Electronic Data Interchange - EDI - ERP SCM - SCN Wiki
Do refer the below OSS Notes to know the exist and badi in LIV.
1156325 - BAdIs in the Logistics Invoice Verification environment

Problem in data coming to PI system from SAP?

Similar Messages

Maybe you are looking for