Problem in data transfer mode

when i change sms stores in mass memory instead of phone memory,the phone cant go in transfer mod.
i have lots of sms and it cinsumes lots of phone memory.
i need to transfer them into mass memory.
any suggestion?
n95-2

every night i connect my phone to pc and use this amazing
apllication ,LifeBlog, and automaticly it transfers the sms and pics and videos i receive or capture.
but i wanna know that, isnt any solution that u save your sms in mass memory AND use data transfer mod.
thanks for ur reply.

Similar Messages

  • Problem with Mobile Phone Samsung G800 when put in "data transfer" mode

    Greetings everyone.
    I have a Samsung SGH G800 Phone with a 4 GB SD on it. Everything works fine except from when the I connect the phone to the computer and enable "data transfer mode" which should make the phone appear as a hard disk on my iMac.
    the errors I'm getting from dmesg are these:
    isk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6276] [LBlkNum 0] [FSLogMsgID 1281672978] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1281672978] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6532] [LBlkNum 32] [FSLogMsgID 2089623797] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 2089623797] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6788] [LBlkNum 64] [FSLogMsgID 2018660302] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 2018660302] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7044] [LBlkNum 96] [FSLogMsgID 1586086454] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1586086454] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6540] [LBlkNum 33] [FSLogMsgID 1771542890] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1771542890] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 6796] [LBlkNum 65] [FSLogMsgID 977677278] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 977677278] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7052] [LBlkNum 97] [FSLogMsgID 1983087645] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1983087645] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7308] [LBlkNum 129] [FSLogMsgID 1984679439] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1984679439] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7564] [LBlkNum 161] [FSLogMsgID 882699219] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 882699219] [FSLogMsgOrder Last]
    disk3: I/O error.
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [ErrType IO] [ErrNo 5] [IOType Read] [PBlkNum 7820] [LBlkNum 193] [FSLogMsgID 1191153157] [FSLogMsgOrder First]
    0 [Level 3] [ReadUID 0] [Facility com.apple.system.fs] [DevNode /dev/disk3] [MountPt /Volumes/NO NAME] [FSLogMsgID 1191153157] [FSLogMsgOrder Last]
    Apparently it tries to mount the device but it gets an IO error, what could it be the reason in your opinion? It appears as a hardware level error to me, do you think is it so?
    thanks for your time in advance.

    HI,
    If you go here you will see your phone is not supported by Mac OS X 10.5.
    http://support.apple.com/kb/HT2824
    Carolyn
    Message was edited by: Carolyn Samit

  • N95 8Gb USB Data Transfer Mode not working

    I have a bizarre problem with USB Data transfer.
    a) I upgraded to the new 15.x firmware with the correct HKCSL package - 0557980
    b) I connected PC #1 in data transfer mode with no issue and copied a bunch of installers onto the mass memory and went on to install them - to the PHONE memory.
    c) Later in the day, connected PC #2 and did the same with the last few applications.
    d) Next day tried to connect PC #1 and it didn't work
    e) Thought I must have an application using the MASS storage but checked and not so - all apps on Phone memory.
    f) Went to PC #2 and tried - Data transfer mode works - no problem.
    g) Tried PC #1 again, and still not working. I get all the right messages (Mass storage cannot be used at this time etc) on the handset, and I get the "safely remove hardware" option appearing on the PC - but I don't get a drive letter assigned in the Windows Explorer.
    h) I have tried it on PC #3 and this works as well - no problem.
    1. The working PC's both have PC Suite 2-Beta installed, while the problem PC has no PC suite at all.
    2. I have downloaded the Nokia-connectivity_cable_driver_rel_6_85_10_0 and it installs properly - giving all the expected wireless... options in Device Manager, but I still don't get a drive letter assigned with the basic data transfer mode on this problem PC #1
    So the issue seems to be with a PC that has never seen any version of PC suite, but it worked straight after the firmware upgrade.
    All PC's are XP SP2.
    Any suggestions on anything else to try ?
    Regards

    SOLVED by:
    - attaching N95, selecting USB Data Transfer Mode
    - Going to Device Manager
    - Selecting the USB Mass Storage Device for N95
    - "Uninstall"
    - Remove cable when N95 says its safe to
    - Re-attach cable
    The PC then re-discovered and reloaded the drivers including the mass storage which then worked normally.
    No idea what messed it up in the first place though.

  • Not able to connect N82 to pc in data transfer mod...

    I am not able to connect N82 in data transfer mode( other modes are working fine) though i installed latest connectivity cable driver for N82. It says that it could not find any suitable driver(after search cd provided and online).
    My current firmware version of N82(RM-313) is 10.0.046. Operating system is Windows Vista. Will the firmware update fix the problem or I have to contact customer care center?
    Thank you for your support.
    mlhpr
    Solved!
    Go to Solution.

    22-Mar-2008 02:51 PM
    scoobyman wrote:
    Hi mlhpr
    If phone is set to 'data transfer" mode on user interface and USB plugged into PC N82 behaves as a Windows USB mass storage device and you are saying that Windows Vista can't recognize this?
    Ya thats is what the problem is. As you said the phone was to behave like USB pendrive in data transfer mode but i am getting this error.
    :I first connected the N82 with cable Nokia CA-101 provided with handset and selected the data transfer mode. Then the windows(Vista) icon would appear in task bar showing windows is installing the driver. Then a window pops up saying driver not found and requests permission to search online for driver. When I choose search online for suitable driver, it searches for a while and says no driver found. (net is working prefectly fine). The icon disappears from the bar and phone is inaccessible from windows explorer. But USB indicator on mobile screen is active until i disconnect using mobile connectivity settings.
    Actually i wanted this mode for installing the Nokia Maps which requires the phone to be in data transfer mode.
    mlhpr

  • N95-8GB - Not able to connect in Data Transfer Mod...

    Hi all,
    Recently I bought N95-8GB and installed PC Suite which comes along with the phone in my OS Windows Vista Home Premium. When I try to connect my phone in Data Transfer mode, I am getting message "Found new hardware - Windows needs to install driver software for your unknown device" and I am not able to find any driver for the same.
    Please help me out to solve this problem.
    Regards,
    S.Suresh

    just let the wizard run through and select the options that windows will search for the friver itself. the dirvers are included in nokia Pc suite package.
    YOu can also try to use the standard NOkia PC Suite from www.nokia.com/pcsuite or generally look for a fresh version of NSeries PC Suite from thephone web-pages, the CD-ROM versions are normally outdated

  • Unable to connect via "Data Transfer" Mode On N95 ...

    Its been happening for a little while now. When i plug the USB cable in, it asks if i wanna connect via PC Suite, Data Transfer etc
    When i click Data Transfer it says the following:
    "Unable to activate Data Transfer Mode. Mass Memory is in use by another application"
    Does anyone know the fix for this problem?
    Many thanks
    Message Edited by tiff777 on 06-Nov-2008 07:56 PM
    Message Edited by tiff777 on 06-Nov-2008 07:57 PM

    Hi There
    Im not sure this would work for you all but i came accross this discussion after suffering the same problem and after pulling my hair out i finally solved it and thought it was only fair i posted how.
    I had tried all options on here apart from deleteing everything off my memory card ( i wasn't keen on this option ) i checked the running apps and it just showed that standby was running,
    So i thought i would try uninstalling recently installed item one by one, i had recently installed some  software called CALL RECORDER  and although it was not showing up that it was running it was in the background after deleting this the problem was solved ,
    So try and think if there are any apps that you have installed that may be running in the background but not showing up , i would advise deleting these one by one as i did and if it still doesnt work you can reinstall it ,
    hope this helps
    BUT EVEN AFTER ALL THIS I STILL LOVE MY N95 8GB !!!!!!!!!!!!!!!!!!!!!!!

  • Data Transfer Modes

    Hi all
    We are university students from Hungary and the next lecture we should illustrate difference between 3 data transfer modes(DMA,IRQ,Progammed I/O) in Labview(2011 or 2012). 
    Anyone can help us to solve this problem simply?

    Hi, please do not duplicate posts.
    I believe this post is the same as http://forums.ni.com/t5/LabVIEW/data-transfer-mech​anism/m-p/2215872#M707217
    Kind regards,
    Ion R.

  • N95 8GB reboots periodically in data transfer mode

    I have a new N95 8GB running firmware v20. Unfortunately, when I use the genuine USB cable and select "Data Transfer Mode" the phone reboots 60 seconds after I connect the cable (and thereafter each 60 seconds when I don't touch the phone).
    I have tried with a non-genuine cable and the behaviour is the same.
    Coincidentally the "Power Save Time-out" is set to 60 seconds. When I change this to another value, say 40 seconds, then the above rebooting happens every 40 seconds.
    This appears to be a phone bug and makes it extremely difficult to use data transfer mode, unless you can transfer files within the power save time-out period, or unless you are prepared to press a button on the phone within this period.
    **Nokia please fix this**
    See related post: /discussions/board/message?board.id=smartphones&thread.id=81967&view=by_date_ascending&page=1

    Well,rotateme works perfectly for me and i have a n95 8gb too.So there are two things that might happening.
    1.You are doing something wrong with the whole installation(does rotateme works when you install it?)
    2.You downloaded your self a corrapted or somekind of a virus or a bug .sis file and installed it to your phone.
    Why dont you try to download one other rotateme file for you?You can find plenty rotateme from a lot of users.I can send you mine,if you want send me an e-mail and i`ll send to you the .sis file that i used and as i said,it works fine for me.
    Peace
    Message Edited by noslien on 06-Feb-2008 07:47 AM
    Eykleidis

  • I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

    I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

    Hi,
    Regarding the issue here, please take a look at the below links to see if they could help:
    Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
    And a blog here:
    Windows Server 2012 slow network/SMB/CIFS problem
    Hope this may help
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • E90 on data transfer mode.

    hi
    i am trying to connect my E90 to the PC via data transfer mode but i get the message saying "Unable to activate data transfer mode. memory is being used by another application" when i check, i have no applications running. Kindly help..!!!
    Solved!
    Go to Solution.

    If you have installed 3rd party themes to your memory card, and then choose to use one of these, this will possibly trigger the error message that you are seeing...
    Steve at AAS recommends installing themes to the phone memory and not to the memory card...

  • Quitting Data Transfer mode - how?

    Hi,
    Is it possible to quit Data Transfer mode in N95. Any USB connection offers this mode, but doesn't show a way of quitting it.

    have you tried to remove the usb cable?
    Greece Nokia X6 RM-559 v40.0.002

  • N70 data transfer mode?

    Hi,
    I loaded Nokia Maps on an N70, and am attempting to use the Nokia Map Loader.
    However, when I run it, it gives me a message saying I need to connect the phone using USB in data transfer mode.
    I know when I plug in my 3250, it gives me a little menu, one of the options of which is said data transfer mode. However, I get no such option on my N70.
    How can I get it into data transfer mode?
    Max.

    To answer my own question...
    FAQ :
    http://europe.nokia.com/A4509368
    "To use Nokia Maps on a Nokia N70 (or any other Symbian Series 60 2nd Edition mobile device) to transfer map data to your mobile device, take the memory card out of your mobile device and insert it into a card reader connected to your PC. Start the Nokia Map Loader to transfer the required map data onto your memory card. On these mobile devices it is not possible to transfer map data via USB cable and PC Suite."

  • Problems with data transfer to CEN via SAPCCM4X agent

    Hello!
    We are facing with the the following problem with data transfer since we installed SAPCCM4X agent:
    - new alerts can only be seen within alert history
    - old alerts cannot be deleted
    We checked the agents via RZ21 and also the appropriate log files do not get further information.
    When we stop the SACCM4X agents and the monitoring data is representing via RFC connection everything is ok.
    Can some one help to solve this problem?
    Thank you!

    As Woodmeister50 told, direct connect between two iMacs via Ethernet cable is much faster than via adaptor, I suppose.
    OS X: How to migrate data from another Mac using Mountain Lion and earlier
    OS X: How to migrate data from another Mac using Mavericks

  • TDMS4HCM  - problem with Data Transfer

    Hello,
    When I am executing Start Data Transfer step system ends up with error - "Execution of program /1CADMC/OLC_000000000144318 failed, return code 2" or Z_PA0022_014: Function module "/1CADMC/OLO_000000000093370" notfound. For each table (f.ex. PA0000, PA0001, ..., or HRP1000, etc.) system generates such error message.
    I tried to change Write Behaviour (all available options) but it doesn't resolve the problem.
    Have you ever had such problem?
    Thanks,
    Jerzy

    Hi Harmeet,
    The system was installed on sender and receiver system and it was running. The problem appeared when basis team perform system copy from production to test environment. Client which was used for TDMS was deleted so basis had to recreate it. from that point I have the problem. No additional settings where done for TDMS on receiver system afterwards.
    In the receiver system we have installed add-ons: DMIS, DMIS_CONT and DMIS_HR (tdms and sender systems were not changed).
    Should we install something else on receiver syst.?
    Thanks,
    Jerzy

  • Problems with data transfer iMac to imac

    I am transferring information from a 2008 iMac to a new 2014 iMac using an ethernet cable and a thunderbolt/ethernet adaptor. It has taken over 21 hours so far. Is this normal? At the Apple store they suggested it would take around 6.
    The new iMac has a screen saying 'Transferring your information' and a moving stripy blue and white line which is presumably to reassure me that something is happening - it isn't!
    I followed the instruction on the Apple website. Since then, I have read that one should turn off wifi on both computers before using Migration Assistant (I didn't because that wasn't in the directions).  I can't access the new computer but have turned off the wifi on the old one.
    There is about 319 gb data on the old computer.
    What shall I do? I need to be able to use the computer for work tomorrow.
    How can I stop the data transfer? There is no obvious means of doing so, there is also no information of how long it would take or how long might be left
    Thank you

    As Woodmeister50 told, direct connect between two iMacs via Ethernet cable is much faster than via adaptor, I suppose.
    OS X: How to migrate data from another Mac using Mountain Lion and earlier
    OS X: How to migrate data from another Mac using Mavericks

Maybe you are looking for