Problem in Database Installation

Hello Dears,
I want to install Oracle9i Rel2 database but when i start universal installer on the "source" and "destination" screen it will give error stagging error may in source and in destination please tell what is the solution it is urgent.
thanks.

Can you elaborate ? On which OS ? Is your software cd is correctly burnt one ?

Similar Messages

Problem Oracle 10g database Installation on Windows 2003 Server

Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad Shoaib

898118 wrote:
Hi All,
I am trying to face some problem to install oracle 10g database on windows 2003 server with service pack 2. Once I start to installation it give me an error "Error in writing to directory 'c:\documents and settings\administrator\local settings\temp\orainstall2004xxx'. Please ensure that this directory is writable and has at least 45MB of disk space. Installation cannot continue"
I double-insured that there is enough disk-space and I am also in the Administrators-Group.
Please guide me for the above problem although I have done oracle 9i database installation with the same configuration.
Regards
Muhammad ShoaibOracle really doesn't like to be installed into directories with spaces in their names.

Check "Problem: Oracle Database 10g Release 2 can only be installed in new

Hi All
Installing 10g software on AIX Box in /oracle/oraHome2,where oracle9i is already installed in /oracle/oraHome1 and oracle inventory is in /oracle/inventory
In product specific prerequisite screen I am getting the
check:Oracle Home incompatibilties is failed I am getting the error
Check complete. The overall result of this check is: Passed
=======================================================================
Checking for Oracle Home incompatibilities ....
Actual Result: Oracle9i Database 9.2.0.1.0
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 10g Release 2 can only be installed in a new Oracle Home
Recommendation: Choose a new Oracle Home for installing this product
though I am installing it in different oracle homes why i am getting this error?
Is it because 10g installation is picking the same oracle inventory /oracle/inventory
do i need to make different oracle inventory for different oracle homes???????plz confirm..is thats the reason i am getting this error??????
Thanks inadvance
Gagan

I figure out you are trying to install 10gR2 on top of an existing 9iR2 Oracle Home. This is corrected at the Path definition window. Most probably you just click on the <Next> and by default the 9iR2 Oracle Home was selected. You must define a new oracle home for the 10gR2 install.
~ Madrid

10g database installation in windows2003

Following error found in the insallation of 10g database installation in Windows 2003.
Kindly give me the solutions in [email protected]
Thaning you
Mohan, Milma, Tvm.Kerala India.
Error list from Oracle configuration assistant
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Parsing command line arguments:
Parameter "orahome" = E:\oracle\ora10g
Parameter "orahnam" = OraDb10g_home1
Parameter "instype" = typical
Parameter "inscomp" = client,oraclenet,javavm,server,ano
Parameter "insprtcl" = tcp,nmp
Parameter "cfg" = local
Parameter "authadp" = NO_VALUE
Parameter "nodeinfo" = NO_VALUE
Parameter "responsefile" = E:\oracle\ora10g\network\install\netca_typ.rsp
Done parsing command line arguments.
Oracle Net Services Configuration:
Profile configuration complete.
Oracle Net Listener Startup:
Running Listener Control:
E:\oracle\ora10g\bin\lsnrctl start LISTENER
Listener Control complete.
Listener started successfully.
Setting Listener service to start automatically.
Listener configuration complete.
Default local naming configuration complete.
Oracle Net Services configuration successful. The exit code is 0
Configuration assistant "Oracle Net Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "iSQL*Plus Configuration Assistant":
iSQL*Plus 10.1.0.2.0
Copyright (c) 2004 Oracle. All rights reserved.
Starting iSQL*Plus ...
iSQL*Plus started.
Configuration assistant "iSQL*Plus Configuration Assistant" succeeded
================================================================================================================
Output generated from configuration assistant "Oracle Database Configuration Assistant":
java.io.IOException:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1388) A new member could not be added to a local group because the member has the wrong account type.
     at oracle.sysman.assistants.util.OsUtilsBase.execProg(OsUtilsBase.java:1090)
     at oracle.sysman.assistants.util.OsUtilsBase.execProg(OsUtilsBase.java:1026)
     at oracle.sysman.assistants.util.OsUtilsBase.execProg(OsUtilsBase.java:1007)
     at oracle.sysman.assistants.util.Oradim.addEntry(Oradim.java:530)
     at oracle.sysman.assistants.dbca.backend.InstanceStep.executeImpl(InstanceStep.java:243)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:209)
     at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:250)
     at oracle.sysman.assistants.dbca.backend.CloneRmanRestoreStep.executeImpl(CloneRmanRestoreStep.java:201)
     at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:209)
     at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
     at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2394)
     at java.lang.Thread.run(Thread.java:534)
Configuration assistant "Oracle Database Configuration Assistant" failed

I had the same problem and solved it by doing the following:
Do not stop the DBCA to do this.
Go to Start->Control Panel-> Services -> oracleserviceyoursid and start the service. That will get you through that error.
Just in case you see this one as well....I did encounter a TNS error after that. I resolved this by commenting out (#) the line SQLNET.AUTHENTICATION_SERVICES=(NTS) in SQLNET.ORA file.

11g R1 database installation is successful on windows 7 64-bit

Hi all,
During installtion I got error
Check complete. The overall result of this check is: Failed <<<<
Problem: Oracle Database 11g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.
========================================================
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-18001: The operating system 'Windows Vista Version 6.1' is not supported.
Recommendation: Install the recommended Service Pack.
then I check the boxes(user defined)
Installation is done.
After installation I got tns listener error
then I tried these steps to fix the error and its working fine
On cmd prompt
set ORACLE_HOME=c:\oracle\ora11g
path=c:oracle\ora11g\bin;(path should contain bin folder)
set ORACLE_SID=orcl
set system environment variables also
restart pc
tnsping orcl
Add one line to the WINDOWS/SYSTEM32/DRIVERS/ETC/HOSTS FILE
IP_address hostname.domainname hostname
LISTENER.ORA
make sure host name is correct
tnsnames.ora
sqlnet.ora

Hi user;
Problem: Oracle Database 11g is not certified on the current operating system.
Recommendation: Make sure you are installing the software on the correct platform.Please follow certification matrix:
http://www.oracle.com/technology/support/metalink/index.html
Regard
Helios

Problem during 0racle9ias installation in sun mechine.(very urgent)

Dear Sir,
I installed oracle 9i database in one server and trying to install ORACLE application server in another mechine.
My 9i database installation is ok. but while I am installing 9i application server its giving me error :
Connecting to the cache failed
Reason : ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4: 2: No such file or directory.
My database server is also working properly in oracle client but its giveng problem when installing application server.
I think problem is with my tnsname.ora and listener.ora files.
please help me how I can overcome this problem.
Regards,
sundeep mohanty.

This forum does not answer technical issues or installation problems. Please post your topic in the appropriate Database forum.
Best Regards, OTN Team

Problem with linux installation on Thinkpad T410i

Hello everyone. I have a problem with an installation of Linux (Debian). Installation ended in my Thinkpad T410i, but when you are starting, the computer constantly restarts. With windows does not happen. What's the problem?
Probe with two versions: one with and one without GUI, and always restarts during startup stage or just finish loading the operating system. If eligo Windows in GRUB, the pc works normally.
I appreciate any help you can give me.

Madhukar,
Check the below forums which also discuss about same problem like yours.
Trouble with SAP system installation GUI
error in installation of solution manager
Regards,
Debasis.

Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6

Hello
Hello I have a problem since my installation of the Yosemite update on my Mac I can longer open Indesign CS6.
I have a problem since my installation of the Yosemite update on my Mac I can more open Indesign yet I have installed JavaForOSX2014-001 but it has changed nothing someone could help me?

Please do not post the same question multiple times. If someone can help you, they will, but you need to be patient -- we're all just volunteers, users like yourself. I'm going to delete your other posts.

Interactive report performance problem over database link - Oracle Gateway

Hello all;
This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
query like this: (due to sensitivity issue, I can not disclose real table name)
SELECT apex_item.checkbox(1,b.col3)
, a.col1
, a.col2
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5
table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
I would like to get ideas from people how to resolve or speed-up the query?
Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
Thank you.
Shaun S.

Hi Shaun
Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two),
sourceqry AS
(SELECT b.col3 x
       , a.col1 y
       , a.col2 z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5)
SELECT apex_item.checkbox(1,x), y , z
FROM sourceqry
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two)
SELECT apex_item.checkbox(1,x), y , z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
Sorry for all the questions but it helps to answer the question, if I can.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.

Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed!

Problems by the Installation of Adobe Photoshop Elements 12

Problems by the Installation of Adobe Photoshop Elements 12 can some one help me please?

Thanks you so much,
Somehow it is solved now. It is now perfectly installed. and when it is as
easely as I was using 3.2 version, I shall buy it at once.
God bless you and thanks.
Alwin lyss
2014-07-11 22:01 GMT+02:00 kglad <[email protected]>:
Problems by the Installation of Adobe Photoshop Elements 12 created
by kglad <https://forums.adobe.com/people/kglad> in *Downloading,
Installing, Setting Up* - View the full discussion
<https://forums.adobe.com/message/6543307#6543307>

Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?problem.

Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?
Thanks!
Angela

You may have a hard drive problem. When I installed Lion, the installer told me that it couldn't complete because the hard drive was failing (or broken, the exact words escape me). Since the HD had been functioning just fine, I took it to the Genius Bar, and found out that yes, the hard drive was slowly dying (bad sectors). I couldn't reboot into Snow Leopard, the installer wouldn't let me and then the drive just wouldn't work at all.
I had to replace my drive and restore from Time Machine. Thankfully, I had Time Machine, and had just done a backup 5 minutes before the crash.
Best of luck.

When i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick

HT1349 Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.

Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
Would appreciate help...its driving me up the wall!!

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Problem in Database Installation

Similar Messages

Maybe you are looking for