Problem in Dataload for Statistics Infocube

Hi,
We are installing BI Statistics Infocubes (0TCT_C01) in our BID, BIT & BIP systems respectively and running the Statistics Query (ZTCT_C01_MQ_01) to track the Performance. The Infocubes were successfully loaded with data in BID & BIT systems and we also ran the Query in both the systems. In the middle, We recently refreshed our BI Quality system (BIT system) with a copy of the BI Production system (BIP system). After refreshing, the Infopackages created in BIT system for loading Statistics no longer exists. We created Infopackages again and tried loading the data but the dataload fails giving a Short dump. Please find the short dump below:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_PARAMETER_INVALID_RANGE', was not
caught in procedure "GET_MD_TIMESTAMP" "(METHOD)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the exception would occur, the current program is terminated. The reason for the exception is:
Parameter has invalid value: Parameter SYST_DATE/SYST_TIME has invalid value
00000000/000000.
From the Short dump, it seems the dataload failures is due to the problem in Time stamp & date variation. We checked the system date and time and is showing the correct value only. We are confused on what could be the problem. Is there any specific OSS Note to solve this issue?
Your help is highly appreciated.
Thanks,
Murali

Hi Daya,
Thanks for your time.
I tried the step. I gave the Source system name as {"BITCLNT001" & Datasource name as "0TCT_DS01", i am getting a pop-up message "There is no Datasource with these attributes".
The Datasource name is correct only, i am not sure why this pop message is displayed.
Regards,
Murali

Similar Messages

Include Special Periods into 12th period for Virtual InfoCube(0FIGL_VC1)

Dear SDN,
The following update routine is perfectly working for 0FIGL_C01 InfoCube...
But some reports developed with 0FIGL_VC1 InfoCube....Still Special Periods are coming....
The update routine could look like the following if it is 0FISCPER:
IF COMM_STRUCTURE-FISCPER+5(2) > '12'.
CONCATENATE COMM_STRUCTURE-FISCPER(4) '012' INTO RESULT.
ELSE.
RESULT = COMM_STRUCTURE-FISCPER.
ENDIF.
I want to eliminate special periods problem in 0FIGL_VC1 InfoCube also...
All Special Periods should be in the 12 th Period..
I have included code in the Update rules level ...
But similarly how to do in the Virtual InfoCube, Which does not have update rules...
Help will be greatly appreciated with points...
Thanks in advance...

Hi,
Thanks for your quick reply,
But here i am getting Special Periods for Virtual InfoCube...Whereas 0FIGL_C01--- Special Period problem resolved....
I am also not understanding how come in 0FIGL_VC1 -- Special periods problem still existing..
Pls provide a solution
Thanks

Problems with Creating Real-Time InfoCube in BI 7.0

Hello, Everybody,
I try to create Real-Time cube for BW-BPS planning, but when i want to insert a key figure into real-time info cube i get error:
Short dump has not been completely stored(too big)
Exception condition "Node_related_missing" raised.
Could You help me?
Thanks in advance,
Best Regards,
Arunas Stonys

Hi Arunas,
I think you are not on SP10. you may need to implement the SP10 or advance correction as in this note:
Note 968097 - Error in BI metadata maintenance (InfoCube, MultiProvider)
Symptom
Note that the attached corrections cause follow-up errors. You must also implement the corrections from Note 971918.
You are in the maintenance dialog for an InfoCube or a MultiProvider. When you enter new key figures in this provider, a program termination occurs with message "NODE_RELATED_MISSING" in class CL_RSO_DATA_TREE.
This problem occurs because the InfoProvider does not contain a unit dimension yet and the system tries to insert the relevant unit into the unit dimension (that does not exist).
Other terms
Transaction RSA1, RSDCUBE, RSDMPRO
Reason and Prerequisites
This problem is caused by a program error.
Solution
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package is available once Note 0914304 "SAPBINews BI 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
To provide information in advance, the note(s) mentioned above may already be available before the Support Package(s) is/are released. In this case, the short text of the note still contains the words "Preliminary version".
Thanks,
Raj

Wt r the diff design alternatives for an infocube

pls give a brief description

Hi ,
The design alternatives for an infocube is set while constructing statistics in the statistics
IF u go to Tcode RSDDSTAT u can find the answer for ur question
Pls assign me full points if answer satisfied to you
Regards ,
Subash Balakrishnan

New InfoSouce for an InfoCube

Hi experts,
Would it be advisable not to use the autogenerated InfoSource for an InfoCube (name = 8xxxx), create a new InfoSource (name = Zxxxxx) and attach the InfoCube DataSource there? I am planning to create a new InfoSource for an InfoCube and add some additional Key Figures.....
What are the disadvantages of doing this? Would this be a maintenace nightmare?

Hi,
I think there is a problem. While you create/generate export datasource from cube(datasource, infosource and mapping will be generated automatically). If you are assigning this perticular datasource to different infosurce(I am not sure it will work if you generate datasource again or activated cube). It will overwites the existing mappings. Test it.
I think you are adding new fields in infosource to write some code in start routine. But its better to maintain new fields in targer and write field level routines by definig some global internal tables or variables, then you no need to enhace the infosource. And also you will not get any problems in future.
Hope it Helps
Srini

JMS bridge and MQSeries. looking for statistics

          Hi !
          I have to use Weblogic 7 SP4 in cluster with a distant MQSeries queue manager.
          I know I can't have a "exactly once" quality of service. I use a MDB (deplyed
          on each instance of the server).
          I'm looking for statistics about how often a message can be treated 2 (or more)
          times.
          Thanks a lot for any help !
          Florent


Hi Florent,
          Since these are MQ messages, it might be possible to find
          such statistics in MQ. Also, I think that MQ stores a
          redelivery count in their messages - so you can likely
          instrument your application code to get at the count.
          Note that 7.0 actually does support exactly once with WL MDBs driven
          by MQ. If you use transactions you can infer some stats on redeliveries
          by checking the relevant transaction statistics for rollback counts.
          I'm attaching some notes on JMS integration for your
          convenience.
          Tom
          florent wrote:
          > Hi !
          >
          > I have to use Weblogic 7 SP4 in cluster with a distant MQSeries queue manager.
          > I know I can't have a "exactly once" quality of service. I use a MDB (deplyed
          > on each instance of the server).
          >
          > I'm looking for statistics about how often a message can be treated 2 (or more)
          > times.
          >
          > Thanks a lot for any help !
          >
          > Florent
          JMS Integration of Foreign Vendors with BEA WebLogic Server
          The following notes are derived mostly from "http://dev2dev.bea.com/technologies/jms/index.jsp".
          For additional questions, a good forum for WebLogic questions in general is "newsgroups.bea.com". These can be mined for information by using Google's newsgroup search function.
          JMS Integration Overview
          - For integration with "non-Java" and/or "non-JMS" platforms, see "Non-Java Integration Options" below.
          - For a foreign JMS vendor to participate in a WL transaction it must support XA. Specifically, it must support the javax.jms.XA* interfaces.
          - In WL versions 6.0 and up it is possible to make synchronous calls to foreign JMS vendors participate in a WL transaction as long as the foreign vendor supports XA.
          - WL 6.0 and 6.1 MDBs can be driven by foreign vendors non-transactionally. They can be driven transactionally by a select few foreign vendors (MQ is not part of the select few)
          - WL 7.0 and later, MDBs can be driven by foreign vendors transactionally and non-transationally.
          - WL 6.1 and later WL provides a messaging bridge feature. Messaging bridges forward messages between any two JMS destinations, including foreign destinations, and can transfer messages transactionally or non-transactionally.
          - WL 8.1 JMS provides additional features that simplify transactional and JNDI integration of foreign vendors. See http://edocs.bea.com/wls/docs81/jms/intro.html#jms_features
          Integration with 8.1 Details
          A good overview of 8.1 JMS interop capability is the presentation "Integrating Foreign JMS Providers with BEA WebLogic Server" here:
          http://www.bea.com/content/files/eworld/presentations/Wed_03_05_03/Application_Servers/1097-Foreign_JMS_Providers_WLS.pdf
          This document refers to helpful new 8.1 features, which simplify integration. These include:
          http://edocs.bea.com/wls/docs81/ConsoleHelp/jms_config.html#accessing_foreign_providers
          http://edocs.bea.com/wls/docs81/jms/j2ee_components.html#1033768
          And are also summarized here (under interoperability):
          http://edocs.bea.com/wls/docs81/jms/intro.html#jms_features
          Also read the extensive MDB documentation, which extensively covers integrating foreign vendors:
          http://edocs.bea.com/wls/docs81/ejb/message_beans.html
          The 8.1 features are likely sufficient for most 8.1 integration needs, and you may not need to refer "Using Foreign JMS Providers With WLS" white-paper mentioned below.
          Integration with 6.1 and 7.0 Details
          Read the "Using Foreign JMS Providers With WLS" white-paper:
          http://dev2dev.bea.com/products/wlserver/whitepapers/jmsproviders.jsp
          Note that this white-paper does not take into account 8.1 features.
          For 7.0 read the extensive 8.1 MDB documentation, which largely also applies to 7.0:
          http://edocs.bea.com/wls/docs81/ejb/message_beans.html
          Non-Java Integration Options
          - WL JMS has a JNI based C client which is available for Windows and some UNIX platforms. This C client supports 7.0 and up, and will be officially packaged with WLS in 9.0 (virtually unchanged). The C API is currently only supported through the jms newsgroup. See "JMS C API", here:
          http://dev2dev.bea.com/technologies/jms/index.jsp
          - WL supports direct Windows COM access through its "JCOM" feature. This doesn't include the JMS API, but one can invoke EJBs which in turn invoke JMS. See
          http://e-docs.bea.com/wls/docs61/jcom.html
          http://e-docs.bea.com/wls/docs70/jcom/
          http://e-docs.bea.com/wls/docs81/jcom/
          - Similar to JCOM, but more advanced, WL supports IIOP standard based access on multiple platforms. You can use the BEA Tuxedo C client for this purpose (no license fee). This doesn't include the JMS API, but one can invoke EJBs which in turn invoke JMS. See
          http://e-docs.bea.com/wls/docs81/rmi_iiop/
          http://e-docs.bea.com/wls/docs70/rmi_iiop/
          http://e-docs.bea.com/wls/docs61/rmi_iiop/
          Unlike most other approaches, the IIOP client approach also allows the client to begin and commit user (JTA) transactions (not configured).
          - If you already have a BEA Tuxedo license, one option is communicate through BEA Tuxedo (which has various APIs on Windows) and configure a WebLogic Server to respond to these requests via the WTC bridge. Search for "WTC" in the BEA docs. Unlike most other approaches, the Tuxedo API approach also allows the client to begin and commit user (JTA) transactions.
          - Another approach is to interop via web-service standards. Or even to simply to invoke a servlet on the WL server using a basic HTTP call from Windows. These in turn can invoke the JMS API. There is a white-paper on "Interoperability Study of BEA WebLogic Workshop 8.1 and Microsoft .NET 1.1 Web Services", that demonstrates web-services here:
          http://ftpna2.bea.com/pub/downloads/WebLogic-DotNet-Interop.pdf
          - Yet another approach is to use a third party product that is designed to wrap any JMS vendor. There are even open source versions. In no particular order, here are some examples: Open3 WinJMS, CodeMesh, Active JMS, SpiritSoft
          - Finally, there are .NET/C/C++ integration libraries that not specific to JMS, some examples are JNBridge, Jace, and CodeMesh.
          Notes on MQ Remote Capable XA Clients
          Until recently, IBM MQ JMS clients could not work transactionally unless they were running on the same host as their MQ server. This is a limitation unique to MQ that was relaxed with the introduction of IBM's new "WebSphere MQ Extended Transactional Client". See:
          http://publibfp.boulder.ibm.com/epubs/pdf/csqzar00.pdf
          The product is new, and for some reason, configuration of this client seems to be tricky, even when WebLogic is not involved at all. Oddly, the main sticking point seems to be simply making sure that class paths refer to the required IBM jars:
          - Required on WLS where MQ objects are bound into JNDI:
          com.ibm.mq.jar, com.ibm.mqjms.jar
          - Required only if MQ objects are bound into JNDI on a different server:
          com.ibm.mq.jar
          If there are problems when using this client, first get it to work using a pure IBM client without any BEA classes involved. Once that is working, search the WL JMS newsgroup for answers and/or contact BEA customer support.
          Notes on Oracle AQ Integration
          If problems are encountered integrating Oracle's built-in queuing (Oracle AQ) JMS client, there is publicly available wrapper code that can aid integrating AQ directly into MDBs, JMS, or the messaging bridge. The solution is titled "Startup class to bind AQ/Referenceable objects to WLS JNDI", is not supported by BEA, and is posted to:
          http://dev2dev.bea.com/codelibrary/code/startupclass.jsp
          Caveats:
          The solution doesn't directly support concurrent consumers. Perhaps Oracle requires that concurrent consumers each have a unique JMS connection? As a work-around, parallel message processing can be achieved indirectly by forwarding AQ messages into a WL JMS destination - which do support concurrent processing.
          Up-to-date versions of Oracle may be required. For more information, google search the weblogic.developer.interest.jms newsgroup for "Oracle" and "AQ".
          The solution doesn't seem to support transactions, it may be possible to extend it to do so.
          MDB Thread Pool Notes
          WL7.0SP? and WL8.1 and later support the "dispatch-policy" field to specify which thread pool an MDB uses to run its instances. In most cases this field should be configured to help address potential performance issues and/or dead-locks:
          http://edocs.bea.com/wls/docs81/ejb/DDreference-ejb-jar.html#dispatch-policy
          (Note that "dispatch-policy" is ignored for non-transactional foreign vendors; in this case, the MDB "onMessage" callback runs in the foreign vendor's thread.)
          MDB Concurrency Notes
          Queue MDBs driven by foreign providers can run multiple instances concurrently. Topic MDBs driven by foreign providers are limited to one instance (not sure, but transactional foreign driven topic MDBs may not have this limitation). The size of the thread pool that the MDB runs in and the "max-beans-in-free-pool" descriptor limit how many instances run concurrently.
          Design Guide-Lines and Performance Tuning Notes
          The "WebLogic JMS Performance Guide" white-paper contains detailed design, performance, and tuning information for Clustering, Messaging Bridge, JMS, and MDBs.
          http://dev2dev.bea.com/products/wlserver/whitepapers/WL_JMS_Perform_GD.jsp

[nForce] Lets solve this 1394 problem once and for all.

Hi guys,
For the past 3months I have been trying to connect my Panasonic GS150 to my comuter in order to use Avid dvxpress pro. I have the problem of when I connect the camera to the computer, nothing happens. I also have this problem with my Ipod, however testing various different devices with the computer produces a strange outcome. Various different cameras work, xp pops up witha found new hardware device (like it should). Its very strange.
I started to think it was my system. I changed my onboard firewire to a pci card, same solution. So then, i reinstalled windows, same outcome. So i bought a new motherboard nforce2 platinum and to my total amazment, same problem. If was after i had totally failed in finding the solution that i started to look elsewhere on the net for anyone who knows the answer. It seems to be a VIA firewire chipset problem. Every post of people who had similiar problems where looking for the answer but NOONE has solved it, ive come across about 1000 posts with no reply's. Its a problem that thousands have but not many people ever use ther're firewire ports so they dont they've got the problem.
I really dont know what the problem is anymore, is it windows, is it certain 1394 devices, or is it the Via chipset. I havent a clue, so if anyone wants to attempt to solve this problem once and forall they will be the hero of about 3000 potential customers...
Anyone?
Jon.

Yes thats correct. Regardless of the hardware, and various 1394 devices are recognised. I've bought a 4pin to 4pin cable which i will test with different devices to see if they are consistent with a 6pin to 4pin cable, it may be a power issue. Not sure what chip on pci card, heres the info from website.
- Three external 6-pin FireWire ports
- Interoperable with existing, as well as older, 1394 consumer electronics and peripheral products
- Complies with OHCI requirements
- Compliant with IEEE 1394a-2000 standard
- Isochronous transfer support (guaranteed bandwidth) for DV video data transfer from Camcorder to PC
- Provides three fully compliant cable ports, each supporting 400Mbits/sec, 200Mbits/sec and 100Mbits/sec traffic
- Plug and Play & Hot-Swappable for all ports
- Power overload and protection failure on each port
- PCI bus master with PCI 2.2 Bus specification

Problem with the FOR statement.....again!

Hi everyone,
Well I'm still trying to do a car slideshow using external
files and can't seem to see the end. The current movie is here:
http://www.virtuallglab.com/projects.html
I also attach the code. My problem is I had originally set up
an animation with 2 pictures sliding in with some text, and then
wait 4 seconds before sliding out, and then next pictures and text
would slide in and so on, using a setInterval.
The problem is the FOR loop seems to skip the setInterval and
the function "wait", so it just loops quickly and jumps to last
picture, so on the example above, it just slides the last picture
(i=9) and that's it!
Can you not include another function within a FOR statement.
Or is there a way to tell the FOR loop to wait until all motion is
finished?
Any help greatly appreciated
import mx.transitions.*;
import mx.transitions.easing.*;
for (i=0; i<10 ; i++) {
var picLeft = "pics/"+i+".jpg";
var picRight = "pics/"+i+"b.jpg";
var txtToLoad = "text/"+i+".txt";
this.createEmptyMovieClip("leftHolder",1);
leftHolder.loadMovie(picLeft,i,leftHolder.getNextHighestDepth());
leftHolder._x = -200;
leftHolder._y = 15;
var leftTween:Tween = new Tween(leftHolder, "_x",
Strong.easeOut, leftHolder._x, 10, 2, true);
this.createEmptyMovieClip("centerHolder",2);
centerHolder.loadMovie(picRight,i+"b",centerHolder.getNextHighestDepth());
centerHolder._x = 180;
centerHolder._y = 250;
var centerTween:Tween = new Tween(centerHolder, "_y",
Strong.easeOut, centerHolder._y, 15, 2, true);
text._x = 600;
myData = new LoadVars();
myData.onLoad = function(){
text.carText.text = this.content;
myData.load(txtToLoad);
var textTween:Tween = new Tween(text, "_x", Strong.easeOut,
text._x, 420, 2, true);
myInterval = setInterval(wait, 4000);
function wait() {
var leftTweenFinished:Tween = new Tween(leftHolder, "_x",
Strong.easeOut, leftHolder._x, -200, 1, true);
var centerTween:Tween = new Tween(centerHolder, "_y",
Strong.easeOut, centerHolder._y, 250, 1, true);
var textTween2:Tween = new Tween(text, "_x", Strong.easeOut,
text._x, 600, 1, true);
clearInterval(myInterval);
***************************************************************************************** ***

There is no way to tell a for loop to wait. That is not what
they do.
The entire for loop will execute (if possible, and it doesn't
enter some kind of continuous infinite loop) completely before each
time the frame is rendered.
If you want to spread things out over time you need to use
the setInterval -- but not inside a for loop! If you do that you
immediately set however many intervals as your loop has. In this
case you will also assign the ids for those intervals to the same
variable, effectively overwriting the value so you will never be
able to clear most of those intervals.
So you need to rethink you whole structure. Set up some kind
of counter and limit like this:
var slidesToShow:Number=10;
var curSlide:Number=0;
Then have your setInterval increment the curSlide each time
it is called and check to see if it has shown all of them. That is
where your "loop" comes in.
As for the other part of your question -- yes you actually
have two different issues going on -- again you cannot make a for
loop wait for anything. So no there is no way to pause it while you
wait for your tween to end. But you can be notified when a tween
ends.
Check out the documentation about the tween class in the help
files. There you will find the onMotionFinished event. So you can
set up one of those to start whatever needs to be started when the
tween has finished.
You should also use the MovieClipLoader class to load your
images, because you have no idea how long it will take to load
them. Using that class you get a nice event (onLoadInit) that tells
you when the asset is ready to be used.
Finally I'm thinking you might want to use setTimeout instead
of setInterval. It only goes once, while setInterval repeats
forever. So I would think your algorithm would be something like
this.
1. load external asset
2. when ready animate in and set onMotionFinished handler
3. when motion is finished start loading next asset and
setTimeout for 4 seconds.
4. when 4 seconds is up or the clip is loaded (which ever
takes longer) go to 2 and repeat.
If this is going to be run locally on a hard drive or CD you
won't have any problem with the length of time it takes to load the
external assets, but if it is over the web it will take time.

Problem with Overwrite for Key Figures in ODS

A bit of a long explanation, but the problem is not so complicated...
We have an ODS containing contract line items. Each line item has a key figure "Total Contract Target" that is marked with update type "overwrite". We have modified the extractor that delivers data for this ODS so that the key figure is set to a value from the contract header. Since we don't want the key figure to be duplicated if there are multiple line items on the contract, the user exit for the extractor modifies only the first line item delivered.
For example, overall contract target value = 100. Contract has 3 line items. Contract target value for line item 1 is 100. Target value for line item 2 and 3 is 0.
This all works fine for initial loads, but there is a problem with the business content extractor for deltas. Whenever a single change is made, it delivers three sets of records. Continuing the example, we would receive 9 records for the contract (3 sets of 3 line items). Each of the three sets contains the same records. Only the first set has the correct contract target value. Since the ODS key figure is set to overwrite, our method of setting the total contract value in the first record doesn't work, because the extractor delivers duplicates so the duplicates overwrite the total with a 0.
Would setting the key figure for total contract value to update type "additive" solve this? (I'm concerned that additions would be made if there were only a change to characteristics and not the key figure). Thanks for your assistance.

Since we ought to post solutions to problems we discover for people who search this forum...
Solved this by modifying the customer exit for the extractor to set the key figure for the first contract line item encountered AND for all subsequent records with the same contract number / contract line item. Since the key figure in the ODS is set to overwrite, this makes sure that the last record written doesn't overwrite the key figure with 0.

Problem with mail for exchange after update on E72...

Hi everyone,
I updated Nokia E-mail to ver 3.9 on E72. Now I am facing a problem with mail for exchange. I have configured gmail on mail for exchange. I recieve a warning that "unable to sync contact administrator if problem persist". It started to pop up just after the update was over and is very frustrating. Even previously i used to recieve mails instantly but now it generally takes half an hour for me to recieve them. I deleted and created mail for exchange several times but to no avail.
Also i am not able to automatically recieve mails other emails which i have configured. every time I have to manually download them everytime.
Can anybody suggest a way out.
Thanks
Anil

It could be a problem if you're using your network's connections...
I was on a Pay & Go tariff with o2 some time ago, and needed secure connections for various things, o2 told me they didn't provide secure connections on Pay & Go tariffs...
Could be worth checking with them to make sure it's supported.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Problem with facetime for mac

hello guy! I've got a problem with facetime for mac.My sister has a I-pod touch fourth generation with factime but i cna't phone her a message come on my mac.It say "xxx can't receive facetime's calls"!Can you help me??

Thanks, Dah•veed.
I did see mention of using Google Public DNS while I was searching the forums prior to posting, but to be honest didn't think it was a DNS-related problem.
However, to rule it out I've set the prefered DNS servers on my router to Google's, but FaceTime still disconnects after 4-5 seconds when calling between me and my brother-in-law. It doesn't matter who initiates the call.
As a test, before I made the changes to my router, I logged into FaceTime as him on my MBP and tried calling myself on my iMac, and that was successful.
The same test between the two iMacs when they were here was unsuccessful, so now I'm definitely thinking it's something on the '08 iMac.
Now I just need to figure out what...

Problem with Twitter for Mac notifications

Hello,
I have a strange problem with Twitter for Mac. On both my home and office Macs. New posts appear in app window but there aren't any notifications even though notifications are set in preferences to show in both dock and menubar. Perhaps anyone noticed similar strange behaviour? I didn't find anything similar on Twitter forums.
Thanks in advance.

Solved by
Dr.AvituvOct 20, 2014 11:09 PM
go to Terminal and post this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/support/lsregister -kill -seed
if it doesn't have that specific directory try this:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -seed
once the scanning is done (can be short or long, depends on how heavy your system is) RESTART the computer.
when you're back, go to Apple>system preferences>extensions.... guess who's there.
I hope it helped.
The Doctor.
iMac, OS X Yosemite (10.10)
To restore Actions extensions for good and other stuff
THANKS!

Problem with GarageBand for iOS 6/7 Iphone 3gs / 4

Problem with GarageBand for iOS 6/7 Iphone 3gs / 4
Hello,
On February 16, bought the GarageBand for iOS which was free and so I find and install it on my 3GS .
Take the demo: Curtain Call Demo
and within the instruments :
audio Recorder
Sampler
Smart Drums
Smart Strings
Smart Bass
Smart Keyboard
Smart Guitar
Keyboard
Drums
Guitar Amp
1.4.1 is the latest version for ios 6.
Configure my AppleID on a Iphone 4 and install the program , the version I have the Iphone 4 is the orange ( different from 3gs ) icon and put it on the AppStore : ios 2.0.1 for ios7.
With these instruments :
audio Recorder
Sampler ( to download the instrument )
Smart Drums ( to download the instrument )
Smart Strings (Download the instrument )
Smart Bass ( to download the instrument )
Smart Keyboard ( to download the instrument )
Smart Guitar
Keyboard
Drums
Guitar Amp ( to download the instrument )
and if I give what I need to restore tells me if I bought it I did not restore anything and tells me to buy :
Complete collection of GarageBand instruments and sound at a price of : € 4.49
As they are 2 different versions ? More than anything I say because I have to pay for the instruments in the 2.0.1 version of the Iphone 4 ... ?
And besides not wearing demo Demo Curtain Call : (
GarageBand 1.x If you are upgrading it using iTunes on a Mac or PC, you can restore the original collection of instruments and sounds. There is no need to buy this collection. Press "You've already purchased?" When displayed on iPhone, iPad or iPod touch.
this puts on the AppStore but I have tried to restore as I wrote above, and does not work. There is nothing to restore.
regards

I've been having the same problem. However, I believe my problem is due to the 3G issues I've been having. I don't have internet access even when the 3G symbol appears, so probably my iphone keeps trying to connect to the network and has its battery drained! Have you been having the same issue?

I have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

i have problem with fonts for my site, i have used "Lucida sans unicode " family for certain texts. it shows perfect in mozilla 3.5 and mozilla 4. But the font not supporting in mozilla 5.0? please help me

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

Problem in Dataload for Statistics Infocube

Similar Messages

Maybe you are looking for