Problem in Delete PSA Request

Hello Guys,
I have come across a strange behavior of Delete PSA Request variant in Process Chains. When I am trying to delete PSA through Process Chain, I could delete PSA of all datasources except 0CO_OM_WBS_1.
I tried it through different combinations, but could not delete data in 0CO_OM_WBS_1 through Process Chain. Can anyone help me through this, or any valid explanations on this front.
Thanks,
Saurabh

Hi saurabh,
It seems that you have some inconsistent requests in your PSA. Try running the program RSAR_PSA_CLEANUP_DIRECTORY/_MS and give your PSA technical name there which can be easliy found out once you click on the manage tab of you PSA at the top.
Just put that technical name & run the program in repair mode. One the program is success full, your chain should be able to delete the requests there after.
Check the Below thread, on how to delete the inconsistent requests from PSA.
Finding out the details of the user who deleted a PSA request manually
hope that the info helps you.
Thanks

Similar Messages

Error while deleting PSA Request Manually

Hi Experts,
I am trying to delete Older PSA Request, but it is throwing an Error "Internal Error occured during Authorization Check"....
Also, when i tried to see the Monitor, it is not showing any records anything...Its showing as no logs found...
I have used the Function Module "RSAR_PSA_CLEANUP_DIRECTORY_MS", but it is not working.
Can anybody suggest if there is any solution to delete PSA Request?
Regards,
Anuja

I don't believe this has anything to do with Crystal Reports. Please post in the SAP classic forums.
Don

Delete PSA Request

Hi Experts,
1. I need to delete PSA request(50 request) in BI 7.0 production system.
2. Also need to include the process type 'deletion of PSA request' to the existing process chain.
Pls provide me the steps to follow to perform the above activities.
Regards,
Anand

Hi,
I found this answer for deleting the psa request.
1.      Select the DataSource that you want to delete requests from the PSA for and choose Manage.
       2.      On the next screen, select one or more requests from the list and choose Delete Request from DB.
       3.      When asked whether you want to delete the request(s), confirm.
The system deletes the requests from the PSA table.
You can also delete requests in DataSource maintenance. Choose Goto ®   Manage PSA (pushbutton). Follow the instructions above, starting from step 2.
Can i follow the same in production. Pls confirm.
Regards,
Anand.

Problem in deleting the request from ODS......

Hi,
I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
Can some body let me know how to STOP/DELETE the old request?? I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
Thanks Jeetu

Hi Jeetu,
Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
Hope there will be large volume of data !
Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
I too faced the same issue but i am helpless i could not stop the data load inthe middle!
If you found any solution for this let me also know
Thanks
Ram

Delete PSA request from ODS

Hello Guys,
I need to know how can I delete the PSA request number generated when request is activated
This request is type: ODSR_*
I need to delete this request in order to activate again the data of my ODS reuqest ID, because a problem the activation terminated unsuccessfully, and know I see the request in red, and with the request for reporting available.
I want to delete it, because if I activate the request again, there is going to consume more space in my table space of ODSD.
thanks in advance

Ok, thanks for your help.
One more question.
The first activation failed, and when I saw the table space for ODSD, it decreased for about 1GB, my question is, if I reactivate the request, is going to consume another 1GB for the table space???
Thats why I want to first delete the PSA request that generates when activated data, in order to recover that space that was consume in the first failed activation.

Unable to delete PSA request

Hello,
I am unable to delete the request in PSA the status of the request is Yellow(Undecided)
But I would like to delete this one.
Thanks,

Hello Ram,
Is it giving any error. If so what is that?
Right Click the PSA and select Delete
or you can use the function module RSATREE_PSA_DELETE_BATCH to clear all the PSA.
Thanks
Chandran

Issue in deleting PSA request in the backend table.

All
We have been facing this strange issue with PSA - Ideally, when we delete a request in the PSA, the contents of the respective back end table also get deleted. However, in case of one of the PSAs, if we delete the contents of the PSA, the same is not reflected in the backend table. As of today, the PSA is empty but the back end table has around 1 mn records. Looks like it has appended all the requests that we have loaded so far and not deleted the earlier entries.
Any help on this issue will be appreciated. Thanks.
Regards
Niranjana

In continuation it all depends on the SP you are ,i presume you are above SP>10 so below should not be an issue for you.
When you try to delete requests from the PSA that were loaded into the PSA using an old 3.X DataSource and the DataSource has been convertes into a new NW2004S DataSource in the meantime, you cannot delete the requests properly.
The administration information is deleted, but the data remains in the PSA table
Note 983618 - P10:PSA: Deleting requests after converting old DS to new DS
Hope it Helps
Chetan
@CP..

Problem in deleting a request from Dso

Hi Experts,
I have loaded the request into DSO, after activation, i have changed the QM status to red and try to delete it from the manage screen. But it is not getting deleted from DSO.
I have used following tables :
RSREQDONE
RSICCONNT
RSODSACTREQ
For deletion purpose, but i'm not provided with authorization ..
And also i have used FM to delete the request from DSO , but it also failed ..
Can you please help me out in this regard..
Thanks
PT

Hi,
Please check if your DSO is locked by any other process. You can check the lock status from SM12. If your DSO is locked by some other process, you will have to wait till that process finishes or kill the process if it is not required so that your DSO will be unlocked. Once your DSO is unlocked you can retry activation. If this doesn't work, please check if you have the authorization to delete data. after trying to delete the DSO you can run the transaction SU53 to see if there is any authorization failure.
Hope this helps you.
Thanks,
Nithin Reddy.

Problem in deleting a request from ODS

Hi,
i am trying to delete a request (not activated) from ODS, when i checked in SM37 for the status of the job it shows as Cancelled, but when i see for the request in ODS, the requested is deleted, could anyone please let me know why job in SM37 is cancelling when the request is actually deleting,
This is not the case with activated request.
please see the worklog of the cancelled job
                                                                                Job started
Step 001 started (program RSDELPART1, variant &0000000005236, user ID KUMARV1)
Delete running: ODS object ZCFORO01, from 512,483 to 512,483
Delete is scheduled; Selection conditions were substituted
Request REQU_45IYZ9A2BQFRW0IUY5EB4MZ9W successfully deleted from ODS object ZCFORO01
ABAP/4 processor: MESSAGE_TYPE_X
<u><b>Job cancelled </b></u>

Hi Arun,
Yes the system raises an exception and saying that there is an error in ABAP code, could you please let me know what is the error, i have tried this deletion with 3-4 different ODS and to different systems i.e. in Q, P system
Abap code as specified by Exception in ST22 transaction
The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in
"RSSM_PROCESS_REQUDEL_ODSO".
The main program was "RSDELPART1 ".
The termination occurred in line 114 of the source code of the (Include)
program "LRSSM_PROCESSU19"
of the source code of program "LRSSM_PROCESSU19" (when calling the editor
1140).
The program "SAPLRSSM_PROCESS" was started as a background job.
Source code extract
000840       endif.
000850       append l_s_rnr_del to l_t_rnr_del.
000860     endif.
000870     delete l_t_rnr_del where
000880            rnr = ''.
000890     loop at l_t_rnr_del into l_s_rnr_del.
000900       l_idx = sy-tabix.
000910       if l_s_rnr_del-sid is initial.
000920         call function 'RRSI_VAL_SID_SINGLE_CONVERT'
000930           exporting
000940             i_iobjnm = '0REQUID'
000950             i_chavl = l_s_rnr_del-rnr
000960           importing
000970             e_sid    = l_s_rnr_del-sid.
000980       endif.
000990       if l_s_rnr_del-odssid is initial and
001000          not l_s_rnr_del-odsrnr is initial.
001010         call function 'RRSI_VAL_SID_SINGLE_CONVERT'
001020           exporting
001030             i_iobjnm = '0REQUID'
001040             i_chavl = l_s_rnr_del-odsrnr
001050           importing
001060             e_sid    = l_s_rnr_del-odssid.
001070       endif.
001080       modify l_t_rnr_del from l_s_rnr_del index l_idx.
001090       if l_min_sid > l_s_rnr_del-odssid.
001100         l_min_sid = l_s_rnr_del-odssid.
001110       endif.
001120     endloop.
001130     if sy-subrc <> 0.
     >       message x000.
001150     endif.

Problem in deleteing the request

H All,
We ran a load to Master Data (info provider)object.The Load got failed due to invalid data entries.Wheb i tried to dele that particular request from infoprovider .Request is not getting deleted and got folloed msg.
You want to delete request(s) from InfoProvider 0AUVEHICLE
The data target is a master data table
The records in the request are no longer transparent in the table
Only the control entry that shows that the request has been updated
already, is deleted.
This means that the request can be updated again.
Can you please help me in deleting this request.
Kranthi

Kranthi,
This means that even though you delete the request - the master data entries still remain. This happens for Master Data.
You will have to delete the same and reload the data back in.
For example if you data load has :
1|BCD|Sales
and this is part of your master data load , even if you delete the request the entry is not deleted - the entry still remains - you can delete the request in the manage atb and reload the data once again.... SAP is just givig you information that Master Data Objects are not like a DSo where if you delete the request the entries go away. This is because the Infobject tables do not have any request based data - al the data gets updated into the same tables and once you load the data - the data remains there till a manual delete is triggered and request based deletion is not possible...

Problems with delete overlapping requests from InfoCube in PC

Hi guys,
Iu2019m using delete overlapping requests from InfoCube in Process Chains, but Iu2019m not being able to adjust it to my specific requirement.
For example:
I execute DTP to load InfoCube XPTO with Fiscal Year 2008 and 2009. After this I have to load again, but only for 2009.
In this specific example I want my process chain to delete the 2009 data from my first load, because it is overlapped, and leave 2008 data.
Is this possible? If yes how?
Thanks in advance
Jão Arvanas

It will not work that way.
It will look if the selections are same then it wil delete if not then it will not do that activity.
Overlapping settings which you might chosen is based on the delete overlapping for the same selections..
So in this case the selections are different and hence its not possible.
Thanks
Murali

Problem while deleting overlaping request from cube

Hi experts,
I have one process chain in which i have one step where i am executing one DTP to load one cube and in next step deleing overlapping requests from same cube.
i am getting error at that step "Error when deleting requests for comparison request DTPR_4CCDXZLK1OIGCVGGE1PP31Z3Y"
what could be reason?
plz help

Hello,
I guess you have not defined the overlapping variant properly.
Please goto the definition of the variant and check for the right DTP input.
Then at the bottom, select second option "Edit all Infocubes with Following Delete Selections"
Click on deletion selections -> select delete existing requests.
Also select if same datasource and source system. and importantly select the radio button as overlapping.
Then save the variant. and try to use it.
Regards,
Shashank

Problem while deleting activation request

HI all,
we are getting short dumps with UNCAUGHT_EXCEPTION and CX_RSR_X_MESSAGE when trying to delete ODS activation requests, included in Business Content process chains. These requests went bad because the authorization for user ALEREMOTE was not set properly.
After we set this, we re-ran the process chains which loaded the ODS but all failed to activate them. Trying to delete any request causes a dump. Even selecting the "reconstruction" tab of the request causes a dump.
Is there any way to "clean" or reset everything ?
Of course, any effective suggestion will be appreciated and rewarded
Thanks

Hi,
In your short dump description (ST22) or in the system logs (SM21), there should be listed the table where the issue comes from.
When you found that table, try to adjust (via SE14) that table (first without deleting data, then if it doesn't work with the deleting option selected).
Hope it helps,

Delete PSA Request - unable to find the PSA table to see latest request ...

Hi, I wanted to delete request thru an ABAP program in a process chain. I'm not planning to use the Process Chain variant because it will a conditional delete and I want the latest request to be deleted.
I'm unable to locate the PSA table where I can find the reuqest. Any help is appreaciated.

Hey,
You can get the PSA technical name from the data source.
Double click on data source --> from menu bar --> goto -> Technical Attributes
Here you can find the PSA table name.
or you can fine the PSA Table name from the below table.
RSTSODS - Operational Data Store for the trans
here the entry in the filed -ODSNAME_TECH while provide you the tehcnical name of the PSA table.
Regards
KP

Delete PSA requests; no table name

Hi,
I have to delete a lot of requests from PSA; I do this via a little process chain. Therefore I need to know the PSA table.
So I go to my DataSource -> Manage and see in the upcoming dialog window on top the name of the PSA table.
Unfortunately at some DataSources no table name is being displayed.
How can I find the table name, how can I delete quickly all the many requests?
Thanks!

Hi,
You can find PSA table name by Data Source (not by InfoProvider) with SE16. See Table RSTSODS in field specify DS tech name (with * at the end, eg: 2LIS_11_VAITM*): in field ODSNAME_TECH you will find tech name of PSA table.
Hope it helps.
Thanks and Regards,
MuraliManohar.

Problem in Delete PSA Request

Similar Messages

Maybe you are looking for