Problem in deleting a request from Dso

Hi Experts,
I have loaded the request into DSO, after activation, i have changed the QM status to red and try to delete it from the manage screen. But it is not getting deleted from DSO.
I have used following tables :
RSREQDONE
RSICCONNT
RSODSACTREQ
For deletion purpose, but i'm not provided with authorization ..
And also i have used FM to delete the request from DSO , but it also failed ..
Can you please help me out in this regard..
Thanks
PT

Hi,
      Please check if your DSO is locked by any other process.  You can check the lock status from SM12. If your DSO is locked by some other process, you will have to wait till that process finishes or kill the process if it is not required so that your DSO will be unlocked. Once your DSO is unlocked you can retry activation. If this doesn't work, please check if you have the authorization to delete data. after trying to delete the DSO you can run the transaction SU53 to see if there is any authorization failure.
Hope this helps you.
Thanks,
Nithin Reddy.

Similar Messages

  • Need help in deleting the requests from DSO

    Hi All,
    I want to delete the data load requests present in the dso, I cant do that from the manage tab as it is throwing error because of some dump been loaded into it.
    Please tell me the tables names which stores these data load requests of the dso's so that I can delete those requests  in the backend.
    If is there any way to delete these requests or complete data, please let me know. I cant do these operations from the mange tab/delet data tab of dso as it is throwing the error.
    Thanks,
    vinay.

    Hi,
    You can delete the Requests form DSO by useing RSICCONT.
    Follow bellow steps:
    1. Goto SE16.
    2. Give the RSICCONT and Click on Technical Contents.
    3. Give the DSO name--> Click on Execuit
    it will dispaly the number of requests which it exists.
    4. Select your request>Select 'Table Entry' Menu> Select 'Delete'
    Regards,
    Suman.

  • Problem in deleting the request from ODS......

    Hi,
    I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
    Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
    Can some body let me know how to STOP/DELETE the old request??  I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
    Thanks Jeetu

    Hi Jeetu,
    Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
    Hope there will be large volume of data !
    Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
    I too faced the same issue but i am helpless i could not stop the data load inthe middle!
    If you found any solution for this let me also know
    Thanks
    Ram

  • Delete overlapping requests from DSO

    Hi Everyone!
    Is there any function to delete overlapping requests from a DSO in process chain?
    For InfoCube there is one, but how about dso?
    I'm using both delta and full load method in the same dso daily and I want to delete full load requests only and keep delta
    load requests in dso.
    Does anyone have any idea?
    Thanks  in advance.
    Eduardo

    Hi..
    How could you do that since DSO has the overwrite property? For example you are loading from DSO1 or DS to DSO2.
    If u ran a load that goes into DSO2. If u ran same load again it goes into DSO 2 and overwrites the previous request. for that u can verify with display data.
    Is ur DSO additing the records????
    Delete Overlapping Requests Only for Info cubes.
    I request you to post the exact issue so that we can assist you better.
    Regards....KP

  • Deleting overlapping request from DSO

    Hi there!
    Is there any function to delete overlapping requests from a DSO in process chain?
    For InfoCube there is a step, but how about dso?
    I'm using both delta and full load method in the same dso daily and I want to delete full load requests only and keep delta
    load requests in dso.

    Hi Shanthi,
    I tried using info package but still req havnt delete from info cube.
    It works for DTP as i can see many DTPs in list but not mine thats the issue.
    Thanks from your responce. Hoping for any new suggestion.
    i cant manually delete req from production as process chain runs at mid night.

  • Deleting failed request from DSO leading to delete of INIT of DSO to Cube

    data flows from ds1, ds2 and ds3 to dso1 as delta. the data is then taken from dso1 to cube1 via delta
    data flows from ds3 to dso2 as delta. the data is then taken from dso2 to cube 2 via delta.
    when a data is loaded from ds1 or ds2 or ds3 to dso1.. or when data is loaded from ds3 to dso2.. now if we try to delete this un activiated request from lets say dso1. it gives and error that the init from dso1 to cube1 would be deleted as the data has already been data marted.
    this happens even if the request in dso1 is inactive successful or inactive failed.
    i did an init of ds1,ds2, ds3 to dso1. and also did an init from dso1 to cube1. but the problem persists.
    though if all goes good. like no failures in the load, then all is well.
    but if the load failed. say ds2 to dso1 failed. then when we attempt to delete this request from dso1, it says that it has already been uploaded to cube1 and the init will have to be deleted. here when we checked the datamart sign in dso1, it looks like the newly loaded n unactivated data is somehow assosiated with the dso1tocube1 init.
    any thoughts?

    Please give more info.
    How have you connected DS01 and Cube 1? Transformation or update rules? How have you done the initialization?
    What is the version SAP BW that you are using?
    Have you checked any relevant SAP Notes?
    Thanks,
    Krishnan

  • Problems with delete overlapping requests from InfoCube in PC

    Hi guys,
    Iu2019m using delete overlapping requests from InfoCube in Process Chains, but Iu2019m not being able to adjust it to my specific requirement.
    For example:
    I execute DTP to load InfoCube XPTO with Fiscal Year 2008 and 2009. After this I have to load again, but only for 2009.
    In this specific example I want my process chain to delete the 2009 data from my first load, because it is overlapped, and leave 2008 data.
    Is this possible? If yes how?
    Thanks in advance
    Jão Arvanas

    It will not work that way.
    It will look if the selections are same then it wil delete if not then it will not do that activity.
    Overlapping settings which you might chosen is based on the delete overlapping for the same selections..
    So in this case the selections are different and hence its not possible.
    Thanks
    Murali

  • Problem in deletion of data from DSO

    Hi All,
    We are facing a problem in deleting data from Data Store Object.I am trying to delete data by using right click option on DSO -->Delete Data.It is saying "The system has not finished loading request no : XYZ".
    I have tried to trace that request and found that request is running in background and the related process chain was deleted.Also no jobs of that request are available.
    Now i want to delete one field from that particular DSO and it is not allowing because we are unable to delete data.Actually no data is present in Active table but we have data in Change Log table which we are unable to delete.
    Thanks in Advance.
    Regards,
    Jaya.

    Hi,
    Any way u r deleted that processchain if it is there u can kill that job through process chain by killing that job,if it is not possible
    u should ask ur BASIS people in SM50 or SMICM tcode we can kill our job but ask the basis people.
    once u deleted that then delete the data in hange log then (other once the data is there through that DTP it will not allow u to delete so u delete the data) then go for deleting that DTP also.
    Thanks & regards
    sathsih

  • Problem in deleting a request from ODS

    Hi,
    i am trying to delete a request (not activated) from ODS, when i checked in SM37 for the status of the job it shows as Cancelled, but when i see for the request in ODS, the requested is deleted, could anyone please let me know why job in SM37 is cancelling when the request is actually deleting,
    This is not the case with activated request.
    please see the worklog of the cancelled job
                                                                                    Job started                                                                        
    Step 001 started (program RSDELPART1, variant &0000000005236, user ID KUMARV1)     
    Delete running: ODS object ZCFORO01, from 512,483 to 512,483                       
    Delete is scheduled; Selection conditions were substituted                         
    Request REQU_45IYZ9A2BQFRW0IUY5EB4MZ9W successfully deleted from ODS object ZCFORO01
    ABAP/4 processor: MESSAGE_TYPE_X                                                   
    <u><b>Job cancelled </b></u>

    Hi Arun,
    Yes the system raises an exception and saying that there is an error in ABAP code, could you please let me know what is the error, i have tried this deletion with 3-4 different ODS and to different systems i.e. in Q, P system
    Abap code as specified by Exception in ST22 transaction
    The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in         
    "RSSM_PROCESS_REQUDEL_ODSO".                                              
    The main program was "RSDELPART1 ".                                                                               
    The termination occurred in line 114 of the source code of the (Include)   
    program "LRSSM_PROCESSU19"                                                
    of the source code of program "LRSSM_PROCESSU19" (when calling the editor  
    1140).                                                                    
    The program "SAPLRSSM_PROCESS" was started as a background job.                                                                               
    Source code extract                                                                               
    000840       endif.                                                        
    000850       append l_s_rnr_del to l_t_rnr_del.                            
    000860     endif.                                                          
    000870     delete l_t_rnr_del where                                        
    000880            rnr = ''.                                                
    000890     loop at l_t_rnr_del into l_s_rnr_del.                           
    000900       l_idx = sy-tabix.                                             
    000910       if l_s_rnr_del-sid is initial.                                
    000920         call function 'RRSI_VAL_SID_SINGLE_CONVERT'                 
    000930           exporting                                                 
    000940             i_iobjnm = '0REQUID'                                    
    000950             i_chavl  = l_s_rnr_del-rnr                              
    000960           importing                                                 
    000970             e_sid    = l_s_rnr_del-sid.                             
    000980       endif.                                                                               
    000990       if l_s_rnr_del-odssid is initial and             
    001000          not l_s_rnr_del-odsrnr is initial.            
    001010         call function 'RRSI_VAL_SID_SINGLE_CONVERT'    
    001020           exporting                                    
    001030             i_iobjnm = '0REQUID'                       
    001040             i_chavl  = l_s_rnr_del-odsrnr              
    001050           importing                                    
    001060             e_sid    = l_s_rnr_del-odssid.             
    001070       endif.                                           
    001080       modify l_t_rnr_del from l_s_rnr_del index l_idx. 
    001090       if l_min_sid > l_s_rnr_del-odssid.               
    001100         l_min_sid = l_s_rnr_del-odssid.                
    001110       endif.                                           
    001120     endloop.                                           
    001130     if sy-subrc <> 0.                                  
         >       message x000.                                    
    001150     endif.

  • Problem while deleting overlaping request from cube

    Hi experts,
    I have one process chain in which i have one step where i am executing one DTP to load one cube and in next step deleing overlapping requests from same cube.
    i am getting error at that step "Error when deleting requests for comparison request DTPR_4CCDXZLK1OIGCVGGE1PP31Z3Y"
    what could be reason?
    plz help

    Hello,
    I guess you have not defined the overlapping variant properly.
    Please goto the definition of the variant and check for the right DTP input.
    Then at the bottom, select second option "Edit all Infocubes with Following Delete Selections"
    Click on deletion selections -> select delete existing requests.
    Also select if same datasource and source system. and importantly select the radio button as overlapping.
    Then save the variant. and try to use it.
    Regards,
    Shashank

  • I am unable to delete the obj from DSO urgent

    Hi All,
    i want to delet the object from the DSO. delete obj is not available in the context menu. is der any other procedure to delet the obj.
    Thanx

    Hi Priya,
    Pls provide the compelete info of ur problem.
    See here there are many cases.
    If ur requirement is to delete a particular Char from DSO. If it contains data,then u have to delete the data first and then remove the char and then carry the loads...
    Why do u need to delete the requests as u can just delete the data..
    But before deleting the request from DSO check if this data has been loaded tio cube further. In that case if u want to delete the request from DSO, first u have to delete the request from CUbe and then from DSO.
    Thanks..

  • Delete overlapping requests from cube not working in processchain.

    In a process chain, 'deletion of overlapping requests from the cube ' step is used.
    Before this step a DTP step runs with a full update to load the cube. This process chain is scheduled every day.
    Issue is, the process chain failed at the DTP step and after correcting and repeating, the step got executed.
    However, the next step after the DTP,'delete overlapping requests from the cube'
    gets executed but without deleting the previous day's request.
    In the step details a message that 'No request for deletion were found' can be seen.
    Then next day when the DTPstep is executed without any problem the 'delete overlapping requests from cube' step is successful
    and the previous requests from cube are deleted.
    the deletion selections in the step ' delete overlapping request from infocube' is
    Delete existing requests
    Conditions:
    only delete requests from same DTP
    Selections
    Same or more comprehensive
    Because of this issue on a particular day because of the presence of 2 days requests the data is getting aggregated and shown as double in the reports.
    Please help.

    Hi Archana,
    When you delete the bad request from target and before repeating your DTP in PC, make sure the bad request deleted from table RSBKREQUEST also.
    If you find the same request in table, first delete the request from table and repeat the DTP in PC.
    Now Delete overlapping step should work.
    As this is not the permanent solution, please raise an OSS for SAP
    Regards,
    Venkatesh

  • Error while deleting request from DSO: S:RSODSO_ROLLBACK:259

    Hi,
    While deleting request from DSO, we face following errors:
    S:RSODSO_ROLLBACK:259                129 transaction rolled back by an internal error: fail
    Message no. RSODSO_ROLLBACK259
    Job is getting completed with message:
    Deletion of request REQU_3HHPSMIMMVRF87FI0EGC5CS4B from data target ZPR_ODS failed
    Deletion of request REQU_3T80EDOBQR7CWSC8QKKHAMH5N from data target ZPR_ODS failed
    Deletion of request REQU_8JIMF8SRDOG0T3QG6AGRA63Q3 from data target ZPR_ODS failed
    Deletion of request REQU_CMCCHOZGOF3KXNMVXB94ZHMCB from data target ZPR_ODS failed
    Deletion of request REQU_BPCAB8LY6V4CMC3XQ12AWN7MJ from data target ZPR_ODS failed
    <Message short text RSODSO_ROLLBACK 259 does not exist>
    Parallel processes (for Rollback); 000003
    Timeout for parallel process (for Rollback): 000600
    Package size (for Rollback): Dependent on Activation
    Task handling (for Rollback): Backgr Process
    Server group (for Rollback): No Server Group Configured
    Job finished
    FYI:
    Kindly help us to resolve the error.
    Regards,
    Antony Jerald.

    Hi Dinesh,
    Thanks for your reply.
    We have Netweaver 7.30 with BW on hana on SP 9.
    First 3 SAP notes doesn't meets the need.
    Shall I use 1007717 note? 
    Which says:
         use transaction SE16 to delete all entries for this request and for this Operational Data Store (ODS) object from the RSICCONT, RSMONICDP, RSODSACTUPDTYPE and RSODSACTREQ tables. Then set the 'from-date' in the administration of the data target to a value older than the oldest request loaded in this ODS object. Choose 'Refresh'. This corrects the administration.
    Will it resolves the problem?
    Kindly suggest.
    Regards,
    Antony Jerald.

  • How to delete a single request from DSO in BI 7.0

    Dear Experts,
    Could you please tell me how to delete a single request from DSO?
    I mean, in DSO if we delete one request it also delete the requests which are above it. But i don't to delete the above it.
    Please suggest me this issue.
    Regards,
    Prathap

    IN DSO--its a very basic thing....
    ACTIVE TABLE and CHANGELOG tables are overwritten after activation of each request.
    So ,each new request has a realationsip with the older request.
    So in the cases:
    1.If you activate the older request it will delete the new one ,because changelog entries have been written from the data of new request on the basis of the older one.
    e.g older request  entries:
    a x 1
    new request
    a x 2
    change log
    a x 1
    a x -1
    a x 2
    so its quite obvious you can't have  a x 2 directly (because in the infocube you will be sending wrong entries by deleting the just the older request and loadning new request).
    2.If you have activate new and old request toghterh then also system will not allow you to delete the newer request alone and you will have to delete both the requests.
    I guess already someone proposed correct solution to you ...thats selective deletion...but rahter than doing selective deletion there is a better way if you want to cancel out a particular request:
    thats request reverst posting
    IN the process monitor of any particular request you can find out the option for request reverse posting..Its good for individual request cancellation(keyfig values will become 0 for that particular request)
    regards,
    rk

  • Recover deleted requests from DSO

    Hello BI Experts,
    We have been deleted requests from standard DSO accidentally. The data has been deleleted for 3yrs and we have been trying to recover from Reconstruction tab but could not found anything there.
    Can any body tell me how to recover recover deleted requests from DSO? I would really appreciate your great help.
    Thanks in advance,
    Regards,
    Venkat

    HI BI Experts,
    When we personalize Query language to another language in the SAP Portal, the variable selection fields are not displaying with description and they are displaying in the technical name.
    Example: Opened BI report from the SAP Portal and selected Personalized settings, from there selected Portal language as French. when I selected French language, the vaiable selection screen field names started appearing with technical field name in the French language but it should display the field description not the technical name.
    I hope you understand my question.
    End user does not understand the technical names when they have selected personal language. Can any body tell me how can the fields displays with description from the variable selection screen. I would really apprecite your help.
    Thanks,
    Venkat

Maybe you are looking for