Problem in deleting a request from ODS

Hi,
i am trying to delete a request (not activated) from ODS, when i checked in SM37 for the status of the job it shows as Cancelled, but when i see for the request in ODS, the requested is deleted, could anyone please let me know why job in SM37 is cancelling when the request is actually deleting,
This is not the case with activated request.
please see the worklog of the cancelled job
 Job started
Step 001 started (program RSDELPART1, variant &0000000005236, user ID KUMARV1)
Delete running: ODS object ZCFORO01, from 512,483 to 512,483
Delete is scheduled; Selection conditions were substituted
Request REQU_45IYZ9A2BQFRW0IUY5EB4MZ9W successfully deleted from ODS object ZCFORO01
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled

Hi Arun,
Yes the system raises an exception and saying that there is an error in ABAP code, could you please let me know what is the error, i have tried this deletion with 3-4 different ODS and to different systems i.e. in Q, P system
Abap code as specified by Exception in ST22 transaction
The termination occurred in the ABAP program "SAPLRSSM_PROCESS" in
"RSSM_PROCESS_REQUDEL_ODSO".
The main program was "RSDELPART1 ".
The termination occurred in line 114 of the source code of the (Include)
program "LRSSM_PROCESSU19"
of the source code of program "LRSSM_PROCESSU19" (when calling the editor
1140).
The program "SAPLRSSM_PROCESS" was started as a background job.
Source code extract
000840 endif.
000850 append l_s_rnr_del to l_t_rnr_del.
000860 endif.
000870 delete l_t_rnr_del where
000880 rnr = ''.
000890 loop at l_t_rnr_del into l_s_rnr_del.
000900 l_idx = sy-tabix.
000910 if l_s_rnr_del-sid is initial.
000920 call function 'RRSI_VAL_SID_SINGLE_CONVERT'
000930 exporting
000940 i_iobjnm = '0REQUID'
000950 i_chavl = l_s_rnr_del-rnr
000960 importing
000970 e_sid = l_s_rnr_del-sid.
000980 endif.
000990 if l_s_rnr_del-odssid is initial and
001000 not l_s_rnr_del-odsrnr is initial.
001010 call function 'RRSI_VAL_SID_SINGLE_CONVERT'
001020 exporting
001030 i_iobjnm = '0REQUID'
001040 i_chavl = l_s_rnr_del-odsrnr
001050 importing
001060 e_sid = l_s_rnr_del-odssid.
001070 endif.
001080 modify l_t_rnr_del from l_s_rnr_del index l_idx.
001090 if l_min_sid > l_s_rnr_del-odssid.
001100 l_min_sid = l_s_rnr_del-odssid.
001110 endif.
001120 endloop.
001130 if sy-subrc <> 0.
 > message x000.
001150 endif.

Similar Messages

Problem in deleting the request from ODS......

Hi,
I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
Can some body let me know how to STOP/DELETE the old request?? I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
Thanks Jeetu

Hi Jeetu,
Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
Hope there will be large volume of data !
Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
I too faced the same issue but i am helpless i could not stop the data load inthe middle!
If you found any solution for this let me also know
Thanks
Ram

To delete a request from ODS

Hello all,
I am not able to delete the request from ODS .
It gives the error message :no request found in the change log.
how shlould i delete the request??
thnx in advance.
Regards,
Dhanya.

Hello,
thnx sriram n balaji!
i checked my infosource through the prgm:RSAR_PSA_CLEANUP_DIRECTORY
the following message appears in the display log:
PSA: 8ZFIADS11_CA
Version 000 technical name /BIC/B0000043000
Partition 0003
Request Ratio:[Deleted:Total]->1 :2
Records Ratio:[Deleted:Total]->753943 :1507886 ,50 % logically deleted
Partition 0004
Request Ratio:[Deleted:Total]->0 :1
Records Ratio:[Deleted:Total]->0 :753943 ,0 % logically deleted
what should i infer from this ?
can anyone please tell me the step by step procedure to delete the request.
Regards,
Dhanya.

Need to delete a request from ODS

HI
i need to delete a request from ODS Full update,It failed.I forced it to activate for testing and the request turned green.But iam not able to delete the request now as the job log says it has incorrect status and now not able to change the QM action of Request as it has already been activated.Now how do i delete this request.
Thanks
RAJ

Hai,
I think your request has been partially activated so you are not able to delete the request.
If u really need that request to be deleted then see that there sholud not be any request above that one.
Try to make the request red in manage screen and it will pop up a window which is having start no and cancel click no
and then try to delete the request.
If not need that request make the qm status red and leave it the data will be available for reporting.
Regards.
Vikram Singh

Selective deletion of request from ODS which is activated and updated

Hi all,
I would like to delete the request from ODS which is activated and updated into data targets, i.e if i have three resquests 1,2,3 which are activated and loaded into cube..now i would like to delete the between (2) request from ods, it says we have to delete latest first(3) , cant we delete this 2 nd request by doing some sort of settings plz let me know if any body got come to know this...plz
Many thanks in advance,
BRB

Hi
Did you look at the Online-Docu (link above)? In the administration of the ODS (I think menue 'Manage' in an english environment -> I've none at the moment) where you see each loaded package there you have a button right of the request id (status of data mart). If you press on this a dialog screen appears. There you can press on the trash icon. This resets the delta queue for the specific request.
You have to do this for request 3 and 2. Then you can delete the request nr. 2. The bw system will then delete this request from the active data and from the change log. After this you can schedule the delta load again. This process will load request nr. 3 to the connected InfoCubes.
If you do not reset the delta queue you will not be able to load request nr. 3 from the change log.
As I supose you want not to delete request nr. 3 because of some long duration to upload and activate the whole request again.
This works fine. I've done the last weeks often because we loaded request with 3 million records and more.
Regards,
H.J.

Can we delete particular request from ODS

Hi All,
Can't we delete particular request from ODS?
there are dozen of successful requests in ODS, when i deleted one successful request from the middle, all the subsequent requests lost the tick which indicates they are updated to cube. Is there any way that i can undo this one?
can we do selective request(successful) deletion from ODS?
Thanks in advance.
Robyn.

Hi Samara,
what i was trying to do is re-arranging the requests according to chronological order, which are not in. imagine the scenario
ODS requests      cube request
5         ->             E
4         ->             D
2         ->             B
3         ->             C
1         ->              A
what iam trying to do is put them in sequence
ODS request        cube request
5                           E
4                           D
3                           C
2                           B
1                           A
If i delete 3rd ODS request put it over 2 it won't accept as the request number is lesser than that of 2nd request.
can we reconstruct any request from reconstruction tab or just the latest request?
How does this effect the data which is already updated to cube from ODS?
Regards,
Robyn.
Message was edited by:
        Robyn Hoggard
Message was edited by:
        Robyn Hoggard

Deactivate delta update before deleting the request from ODS

Hi all,
Happy New Year wishes to all.
I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
Request 98888 already retrieved by data target BWVCLNT
Delta update in data target BWVCLNT must be deactivate before deleting the request
Do you want to deactivate the delta update in data target BWVCLNT?
So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
Delta request is incorrect REQXXXXXXX in the monitor
A repeat needs to be requested
Data target still include delta request REQXXXXX
If the repeat is now loaded, then after the load
There could be duplicate data in the data targets
Request the repeat?
After execute changes it is showing only zero Records only.
What is that mean and why zero records it is displaying instead of delta records.
Anybody faces this type of problem please let me know. This is somewhat urgent to me
Thanks and Regards
Satish Chowdary

Hi Satish,
First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
I hope this helps.
Thanks,
Krish
Dont Forget to assign Points.
Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

Delete overlapping requests from ODS

Hi,
Since it iss not possible to delete overlapping requests from an ods by any automated process like in info cube.
Can we still delete overlapping request using abap code or the only way to do it is to delete data (selective deletion) in a start routine.
Any tips would be helpful

Hi ,
Try the following logic to delete the ovelapping requests from a particular data source.
*& Report ZV_DELETE_REQS *
*&Description:This program is for deletion of eixsting Full requests *
*& from ODS *
REPORT ZV_DELETE_REQS.
data: RSICCONT like rsiccont,
 rsseldone like rsseldone.
data: begin of i_req occurs 0,
 rnr like RSICCONT-rnr,
 end of i_req.
refresh i_req.
select * from RSICCONT UP TO 2 ROWS
 where ICUBE = 'ZCS_D10'
 order by TIMESTAMP descending.
i_req-rnr = rsiccont-rnr .
append i_req.
clear i_req.
endselect.
loop at i_req.
select single * from RSSELDONE where RNR eq i_req-rnr and
 source in ('0CO_OM_OPA_5',
 '0CS_OM_OPA_1').
if sy-subrc eq 0.
 CALL FUNCTION 'RSSM_DELETE_REQUEST'
 EXPORTING
 REQUEST = i_req-rnr
 INFOCUBE = 'ZCS_D10'
 EXCEPTIONS
 REQUEST_NOT_IN_CUBE = 1
 INFOCUBE_NOT_FOUND = 2
 REQUEST_ALREADY_AGGREGATED = 3
 REQUEST_ALREADY_COMDENSED = 4
 NO_ENQUEUE_POSSIBLE = 5
 OTHERS = 6.
 IF SY-SUBRC <> 0.
 MESSAGE ID sy-MSGID TYPE 'I' NUMBER sy-MSGNO
 WITH sy-MSGV1 sy-MSGV2 sy-MSGV3 sy-MSGV4.
 else.
 message i799(rsm1) with i_req-rnr 'deleted'.
 ENDIF.
 do.
 select single * from RSICCONT where ICUBE = 'ZCS_D10'
 and rnr = i_req-rnr.
 if sy-subrc ne 0.
 exit.
 endif.
 enddo.
endif.
endloop.
hope it helps....
regards,
raju

Problem in deleting a request from Dso

Hi Experts,
I have loaded the request into DSO, after activation, i have changed the QM status to red and try to delete it from the manage screen. But it is not getting deleted from DSO.
I have used following tables :
RSREQDONE
RSICCONNT
RSODSACTREQ
For deletion purpose, but i'm not provided with authorization ..
And also i have used FM to delete the request from DSO , but it also failed ..
Can you please help me out in this regard..
Thanks
PT

Hi,
Please check if your DSO is locked by any other process. You can check the lock status from SM12. If your DSO is locked by some other process, you will have to wait till that process finishes or kill the process if it is not required so that your DSO will be unlocked. Once your DSO is unlocked you can retry activation. If this doesn't work, please check if you have the authorization to delete data. after trying to delete the DSO you can run the transaction SU53 to see if there is any authorization failure.
Hope this helps you.
Thanks,
Nithin Reddy.

Problems with delete overlapping requests from InfoCube in PC

Hi guys,
Iu2019m using delete overlapping requests from InfoCube in Process Chains, but Iu2019m not being able to adjust it to my specific requirement.
For example:
I execute DTP to load InfoCube XPTO with Fiscal Year 2008 and 2009. After this I have to load again, but only for 2009.
In this specific example I want my process chain to delete the 2009 data from my first load, because it is overlapped, and leave 2008 data.
Is this possible? If yes how?
Thanks in advance
Jão Arvanas

It will not work that way.
It will look if the selections are same then it wil delete if not then it will not do that activity.
Overlapping settings which you might chosen is based on the delete overlapping for the same selections..
So in this case the selections are different and hence its not possible.
Thanks
Murali

Unable to delete the request from ODS

Hi All,
I have loaded a request to ODS from flat file and the load got success, the request is activated and is available for reporting. Now the problem is i want to delete the request, but the request is not deleting.
I tried to delete the request by going in to the cube manage and changed the QM status and the technical status to red and delete, but it is not deleted.
Thanks in advance for your reply

Hi Prem,
If the ods has datamart status & has been used to load data to a cube, then u cant delete the ods request. In this case, first, change the QM status of the request in the cube to red (delete) & then it wud be possible to go with the deletion of ods request.
Also check this thread as well
Request unable to delete from ODS.
Regards,
R.Ravi

Delete PSA request from ODS

Hello Guys,
I need to know how can I delete the PSA request number generated when request is activated
This request is type: ODSR_*
I need to delete this request in order to activate again the data of my ODS reuqest ID, because a problem the activation terminated unsuccessfully, and know I see the request in red, and with the request for reporting available.
I want to delete it, because if I activate the request again, there is going to consume more space in my table space of ODSD.
thanks in advance

Ok, thanks for your help.
One more question.
The first activation failed, and when I saw the table space for ODSD, it decreased for about 1GB, my question is, if I reactivate the request, is going to consume another 1GB for the table space???
Thats why I want to first delete the PSA request that generates when activated data, in order to recover that space that was consume in the first failed activation.

Problem while deleting overlaping request from cube

Hi experts,
I have one process chain in which i have one step where i am executing one DTP to load one cube and in next step deleing overlapping requests from same cube.
i am getting error at that step "Error when deleting requests for comparison request DTPR_4CCDXZLK1OIGCVGGE1PP31Z3Y"
what could be reason?
plz help

Hello,
I guess you have not defined the overlapping variant properly.
Please goto the definition of the variant and check for the right DTP input.
Then at the bottom, select second option "Edit all Infocubes with Following Delete Selections"
Click on deletion selections -> select delete existing requests.
Also select if same datasource and source system. and importantly select the radio button as overlapping.
Then save the variant. and try to use it.
Regards,
Shashank

Problem in deleting request from ODS

Hi,
I did an init load from newly created update rule for my existing ODS. I cancelled the INIT load as it was taking a long time and tried to delete the request from ODS, but when i deleted the request it is not getting deleted. Under request/DTP it is showing 'Request without Monitor Log: APO Request or Terminated Request Generation'. Can you please tell me how to delete this request.
Regards,
Raghavendra.

Hi,
The load is from One ODS to another. The problem is i deleted the init, but there is a request in ODS as in mentioned above which i am not able to delete. Help needed.
Regards,
Raghavendra.

Delete the bad request from ODS.

Hi,
i am tring to delete the bad request form ods object but i am unable to delete the request from ods. i am using full uplaod and the processing is "psa and datatarget in parllel. when i check the data in PSA, it is giving "No data packet numbers could be determi request REQU_5SMPS3MTHYJHHUYQ62AM61H89".
Thanks in advance,
Kasi.

Hi KAsi,
I had a similar issue few weeks back, look in SM50 and chk if there are any processes still running which might lock the object. Also chk in st22 to see if any dumps are created under your login. If tehre are any processes - you can try to cancel them or ask Basis to help u with it.
*I guess* - when you hit delete, the delete icon appears but is not able to lock(enqueue) the object and after sometime the delteion program cannot move forward and hence it returns to original status.
regards
Poonam

Problem in deleting a request from ODS

Similar Messages

Maybe you are looking for