Problem in deletion of data from DSO

Hi All,
We are facing a problem in deleting data from Data Store Object.I am trying to delete data by using right click option on DSO -->Delete Data.It is saying "The system has not finished loading request no : XYZ".
I have tried to trace that request and found that request is running in background and the related process chain was deleted.Also no jobs of that request are available.
Now i want to delete one field from that particular DSO and it is not allowing because we are unable to delete data.Actually no data is present in Active table but we have data in Change Log table which we are unable to delete.
Thanks in Advance.
Regards,
Jaya.

Hi,
Any way u r deleted that processchain if it is there u can kill that job through process chain by killing that job,if it is not possible
u should ask ur BASIS people in SM50 or SMICM tcode we can kill our job but ask the basis people.
once u deleted that then delete the data in hange log then (other once the data is there through that DTP it will not allow u to delete so u delete the data) then go for deleting that DTP also.
Thanks & regards
sathsih

Similar Messages

Error while deleting the data from DSO

Hi Experts
I am getting the ABAP Dumps when I am trying to delete the data from the DSO Objects in my Systems.
"    An entry was to be entered into the table
     "\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have
    had a unique table key (UNIQUE KEY)).
    However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
    MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
     initial lines into a table with a unique key.     "
I have tried with multiple DSO's and Have the same issue. Please need your suggestions.
Regards,
Mahesh

Hi......
I think in the ODS setting Unique Data Records checkbox is ticked........if so.........The DataStore object can be used for loading unique data records...........If the loaded request does contain data that is already in the DataStore object, activation of the request will lead to an error.
Find the request in SE16>>RSICCONT table .........and try to delete there....it may work........
Check this.....
u2022 Note 1007717 -Deleting from Data Store object: Termination w/o log
u2022 Note 998704 - Deleting req from DataStore obj: Status at end of processing
u2022 Note 1037507 - System Termination when you delete from DataStore objects
Regards,
Debjani.....

Problem in deleting a request from Dso

Hi Experts,
I have loaded the request into DSO, after activation, i have changed the QM status to red and try to delete it from the manage screen. But it is not getting deleted from DSO.
I have used following tables :
RSREQDONE
RSICCONNT
RSODSACTREQ
For deletion purpose, but i'm not provided with authorization ..
And also i have used FM to delete the request from DSO , but it also failed ..
Can you please help me out in this regard..
Thanks
PT

Hi,
Please check if your DSO is locked by any other process. You can check the lock status from SM12. If your DSO is locked by some other process, you will have to wait till that process finishes or kill the process if it is not required so that your DSO will be unlocked. Once your DSO is unlocked you can retry activation. If this doesn't work, please check if you have the authorization to delete data. after trying to delete the DSO you can run the transaction SU53 to see if there is any authorization failure.
Hope this helps you.
Thanks,
Nithin Reddy.

Problem in transfering data from DSO to InfoCube

Hi,
I am trying to transfer data from DSO to Infocube. But it is giving the following message.
Last delta update is not yet completed
Therefore, no new delta update is possible.
You can start the request again
if the last delta request is red or green in the monitor (QM activity)
It is not allowing to load data to InfoCube from DSO. I checked the request number. But there is no request number in InfoCube. If request no is there I can delete the request from InfoCube and delete the data mart status in DSO and reload again.But there is no request id in IC. So plz guide me how I can tranfer data to InfoCube overcoming this problem.
Actually further updata was running from DSO to IC. But it failed. Executing Function Module : RSPC_PROCESS_FINISH, I set the chain green before loading
data to InfoCube. So it starts executing the next chain. So there is no request id. So plz guide me how I can retain this request id.
Edited by: Purushotham Reddy on Jan 28, 2008 11:19 AM

Hi Reddy,
Make the QM Status Red of the failed request even if it is red.
and then run the same infopackage used in the chain. This will ask for repeat of last delta.
If this process is understood to u then its fine otherwise read below:
the other option is check if this failed request is present in PSA. If it is present in PSA then update the failed request from PSA, here u wont need to do a repeat of last delta. This Option is easier. this u can do from the ,manage tab of the data source I think this u might be surely knowing....
Assign Points if it helps u.....
Thanks,
Nagesh.

Deleting data from DSO(0FIGL_O10) & IC(0FI_GL_C10)

Hi All,
          I would like to know whether Deleting Complete data from InfoCube(0FI_GL_C10)/DSO(0FIGL_O10) & then doing Fresh init-Update from the Source-Systems(We have two) would create any problems.
If there isn't going to be any problem apart from the time, Please explain the Procedure?
Please Reply.
Regards,
Srikar

Hi all,
        Thanks for the replies.
        The reason I wanted to delete the entire data was because by accident someone had deleted the Initial source-system
assignments for one SS(We have two SS; the other one is working properly). So i have decided not to delete the entire data from the Data-Targets(0FIGL_O10 & 0FIGL_C10) as the data from other SS is working properly.
       Data has been loaded only once(Init-Update) from the SS in which i am having the problem. However it was Loaded a long way back & has been data-marted to the InfoCube. Moreover, Init-Load is still present in the PSA.
      1. I want to know whether reloading the PSA(Init-load) data to ODS is going to reassign the Initial SS assignment.
           A) If yes, Do i need to first delete the Init-Data Request from the DSO(which has been data-marted) & from the InfoCube
                  as well. and do i need to change the Requests from Green to Red(In both IC & DSO).
           B) If No, then what am i supposed to do?
Regards,
Srikar

Problem while data processing TRANSACTION data from DSO to CUBE

Hi Guru's,
we are facing problem while data processing TRANSACTION data from DSO to CUBE. data packets processing very slowly and updating .Please help me regarding this.
Thanks and regards,
Sridhar

Hi,
I will suggest you to check a few places where you can see the status
1) SM37 job log (give BIrequest name) and it should give you the details about the request. If its active make sure that the job log is getting updated at frequent intervals.
2) SM66 get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
If its running and if you are able to see it active in SM66 you can wait for some time to let it finish.
3) RSMO see what is available in details tab. It may be in update rules.
4) ST22 check if any short dump has occured.
You can also try SM50 / SM51 to see what is happening in the system level like reading/inserting tables etc.
If you feel its active and running you can verify by checking if the number of records has increased in the cube.
Thanks,
JituK

I am unable to delete the obj from DSO urgent

Hi All,
i want to delet the object from the DSO. delete obj is not available in the context menu. is der any other procedure to delet the obj.
Thanx

Hi Priya,
Pls provide the compelete info of ur problem.
See here there are many cases.
If ur requirement is to delete a particular Char from DSO. If it contains data,then u have to delete the data first and then remove the char and then carry the loads...
Why do u need to delete the requests as u can just delete the data..
But before deleting the request from DSO check if this data has been loaded tio cube further. In that case if u want to delete the request from DSO, first u have to delete the request from CUbe and then from DSO.
Thanks..

Issue when uploading Sales data from DSO to Cube.

Dear All,
I have an issue when I am uploading Sales data from DSO to Cube. I am using BI 7.0 and I have uploaded all sales document level data to my DSO. Then I use a transformation rule to calculate the Sales Value when I am doing DTP to cube. Cube has customer wise aggregation data.
In DSO I have NetPrice(KF) and Delivered_QTY(KF). I do a simple multiplication routine in the transformation from DSO to Cube.
RESULT = SOURCE_FIELDS-NET_PRICE * SOURCE_FIELDS-DLV_QTY .
At the moment I use Active Table(With out Archive) on the DSO to get the data since this is my first load.
Issue is that the figure (Sales Value) in the cube is incorrect. I am getting a very large values which is impossible.
Can someone please help me.
Shanka

Hi,
are you sure that cube has customer wise aggregated data..since it will always aggregate the values of the key figures for the same set of characters...
did you checked the values for the key figures as well and if even they are inflated or is the problem with this key figure only.
During the data load the records may aggregates first for the same values of characters and then multiplication will be happening....if that is the case then you may have to multiply the values before storing it in the data package and then let it aggregate....can be achived through start routine...
but first verify if other key figures are also having the same issue.
Thanks
Ajeet

Not able to delete the data from ODS

Hi All,
I have ODS which is having some requests . All the requests are being loaded with full update only. When I am trying to delete the requests from ODS, out of 4 requests 2 requests have been deleted but rest of them are not at all deleting .
As I am working in Quality system, So I don't have the access to delete request from Table level like RSODSACTREQ, RSICCONT etc...
Can you give any clue to delete the remaining 2 requests.
Thanks,

Hi kavitha,
Does the Request has data mart status.IF yes try to delete the request from the respective DSO's.
and try to delete the request.
are you deleting the Whole data from DSO ? - right click on the DSO and select deleted data from the context menu.
Regards
Prashanth K

Not able to Delete the data from Memory card

Hi all,
I have bought a new nokia 3120 classic.it is working fine but recently i have received some data from my friend.
Then suddenly the problem begins like.. when i take a photo.. i am getting error like the image is not in the format and i am not able to save that.And also, the main problem is I am unable to delete the data from my memory card.
Every time after deleting i am getting the same data.
Why this happening..is it because of VIRUS?? If so how to delete the virus from my memory card??
When i contacted the nokia care people in bangalore they are saying that they can offer the service of formatting the memory card??
Except that my Phone is working fine..the problem is with Memory card!!!
Please help me...

you can actually format your memory card first see if you have such option on your phone to format directly from the phone if that is not possible you can always use a card reader and reformat your card using your pc. just understand that all data from that memory card will be lost unless you do a back up of it. if you do a back up and restore the data to the memory card after reformat you might get the same issue so be careful as to what you will decide to do with the data from the card. once you format your card it should all be good unless the card is corrupted itself which can also happen. but first try with the reformat and see if it works out for you.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Unable to load data from DSO to Cube

Good morning all,
I was trying to load data from DSO to Cube for validation. Before loading the new data, I deleted all from DSO and Cube. They contain no request at all. Cube has "Delta Update". First DSO was loaded 138,300 records successfully. Then Activated the DSO. The last when I clicked Exectue (DSO --> Cube), it loaded 0 record. I was able to load the data yesterday. What might be the reasons for this situation?
Thank you so much!

Hi BI User,
For loading delta upload into the data target, there should be an initialization request in the data target with same selection criteria.
So..first do the initialization and perform delta upload into the cube.
Regards,
Subhashini.

Regarding Loading the data from DSO to cube.

Hello Experts,
I have DSO which loads data from psa using 7.0 tranformation (using DTP). And i have a cube which loads the data from that DSO using 3.x transfer rules. Now i have deleted the init request for a infopack before load the data into DSO. But when i load the data from DSO to cube by right click on DSO -> click On Additional Functions -> update the 3.x data to targets, It is giving me an error like 'Delete init. request REQU_4H7UY4ZXAO72WR4GTUIW0XUKP before running init. again with same selection
Please help me with this.
i want to load the data in the init request to cube..
Thanks

Hi Shanthi,
Thanks For reply. I have already deleted the init request from source system to DSO and then i have tried still i am getting the error.
Thanks

DTP load data from DSO to CUBE can't debug

Hi,all expert.
I met a problem yestoday.
When I load data from datasource to DSO,and debug the start routine,it was ok.But when I load data from DSO to CUBE,and debug the routine,it got an error like this:
inconsistent input parameter(parameter:<unknow>,value <unknown>)
message no: RS_EXCEPTION 101.
I don't know why,PLZ help me,thank you very much.

Hi,
An alternative way to do this is to have a small code for infinite loop in your start routine. And when you start the load goto SM50 and debug the process which is executing the load, from there you can close the infinite loop and carry on with the debugging. Please let me know if you require further information.
Thanks,
Arminder

Issue while loading of data from DSO to InfoCube

Hi Experts,
Can you tell me what might root casue if data is coming into DSO from R3 its correct and fine as required but while loading it to InfoCube from DSO its showing wrong data like some of Line Items that were closed were shown open in Cube AND also KF values were not right
Also there is no Routine code involved b/w DSO and InfoCube.
Thanks in adv .
NP

Hope you didnt delete some req from DSO without deleting change log . This might cause inconsistency.
If so , delete data from dso by right click delete data and reload .

When I extracting data from DSO to Cube by using DTP.

When i am extracting data from DSO to Cube by using DTP.
I am getting following erros.
Data package processing terminated (Message no. RSBK229).
Error in BW: error getting datapakid cob_pro (Message no. RS_EXCEPTION105).
Error while extracting from source 0FC_DS08 (type DataStore) - (Message no. RSBK242).
Data package processing terminated. (Message no. RSBK229).
Data package 1 / 10/04/2011 15:49:56 / Status 'Processed with Errors'. (Message no. RSBK257).
This is the brand new BI 7.3 system. Implementing the PSCD and TRM.
I have used the standard business content objects in FI-CA (dunning history header, item,activities) and standard Datasource (0FC_DUN_HEADER ,0FC_DUN_ITEMS, 0FC_DUN_ACTIVITIES). I have extracted data till the DSO level . when I try to pull the data to info provider level(cube) using DTP . I am getting fallowing error.
my observation: when ever I use the DSO as source to any target like another DSO or cube. its throwing same kind of error for any flow including simple Flat file .
please suggest any one whether do I need to maintain basic settings since its a brand new BI 7.3.
please help me out on this issue . I am not able to move forward .its very urgent

hello
Have you solved the problem ?
I have the same error...
as you solve this error,
can you help me please I have the same error
yimi castro garcia
[email protected]

Problem in deletion of data from DSO

Similar Messages

Maybe you are looking for