Problem in designing the complex report for the client requirement

Post Author: venkateshvarakala
CA Forum: General
Hi,
I have problem in designing the report (Crystal Report 9.0) with multiple groups wih a sub report in each group with a a group header and footer with a
detail section in each report.
My requirement is as follows.1) Xxxx-sub reportwill have one header conetnt and footer content and detail ection in the middle grouped on one parameter2) Yyyyysub reportwill have one header conetnt and footer content and detail ection in the middle grouped on one parameter3) Zzzzzsub reportwill have one header conetnt and footer content and detail ection in the middle grouped on one parameter4)ABCdsub reportwill have one header one footer in group headers grouper on two prameters, My requirement demands customised detail section i.e.static conetent followed by detail section and a static conetnt(which should not repeat with child table records,should come only once with the a record and
s) and detail section.
example:
main table of the sub report 4 has records m1,m2,m3,m4... and child table has
m1c1m,m1c2,m1c3,m1c4,m2c1,m2c2,m2c3,m2c4,m3c1,m3c2,m3c3,m3c4,m4c1,m4c2,m4c3,m4c4...
The staic content should come only with m1,m2,m3,m4 not with m1c1,m1c2....like this I need in two places in the same report which may have 500 recors printed in single report.
all the above section should be suppressable with a condition including the top 3 reports.
I am able to get the top 3 reports as per the requirement but my forth sub report is getting displayed after each sub-group 1,2,3 which is not happening with
1,2,3. Only 4th set is repeating with 1,2,3.
THis report is attached with 6 datasets.
I linked the main report main table with 1,2,3 (main Table) report filling table but when I am trying to link the 4th table main table I am able to link but
I am not getting the result on the report.All the dataset has the one common column. sub report 1,2,3 are filled with common datasets with condition suppressing where as 4th report is filled with
different results .
1) My question is why the 4 the report is report is repeating with 1,2,3 why 1,2,3 are coming as expected.2) Is it possible to create
Please help me in designing the report as per the requiremnt and suggest me if I need any design modifictions.
Your suggestions and inputs are highy appreciated.Thanks for sparing time in going through my problem and I will be grateful if give solution and share if you have similar experiences.
Thanks
Venkatesh Varakala.

If you create a multiprovider with the two ODS you wont have this problem.
Hope it helps.
Regards.

Similar Messages

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

How can I read the complex data for the stand-alone offline time-frequency analyzer, which only accept real data, that is one-column or one row data ?

I have real complex data (i,q data) for the ISAR imaging. I don't have any knowledge of Labview programming. I bought this signal processing toolset to use only stand-alone time-frequency analyzer.

In the LabVIEW functions palette on the block diagram, if you go to Numeric>>Complex you have to VI's that splits a complex number into rectangular or polar components. Click on the help file for those VI's to see the kind of datatypes you can wire to them.
Cyril Bouton
Active LabVIEW Developper

How to truncate the decimals in the ALV report for the quantity field

Hi All,
I have to display a quantity field and units of measure in the ALV output. If the units of measure eq 'PC' i should not display the decimal places for quantity in the alv output, otherwise i have to display the decimals in the output. How to do this....any help would be highly rewarded. I knew that for this type of cases decimal_o will not work.

Hi,
Declare one more Internal table same as output table. In that intead of that quantity field, declare field_name(15) type c.
data temp type i.
Loop at itab.
if field = 'PC'.
temp = qunantity field.
field_name =temp.
else.
field_name = quantity field.
endif.
endif.
endloop.

Dump for the ALV report for the excel.

HI,
We are having a ALV report.
We are using REUSE_ALV_FIELDCATALOG_MERGE and REUSE_ALV_GRID_DISPLAY.
After we run the report we get the output on the screen properly.
When we choose the "Local File" button it goes to the dump.
The following messages comes.
Runtime Errors " OBJECTS_NOT_CHARLIKE"
"The current statement requires a character-type data object.".
Could you pls advise where is the problem.
Rohita

change the TABNAME to uppercase
ls_fcat-tabname = 'LTB_REPORT'. "<------------ changed to upper case
ls_fcat-fieldname = 'NAME_ORG1'.
ls_fcat-seltext_s = 'Distributor Name'.
ls_fcat-seltext_m = 'Distributor Name'.
ls_fcat-seltext_l = 'Distributor Name'.
ls_fcat-datatype = 'CHAR'.
ls_fcat-outputlen = 30.
APPEND ls_fcat TO ct_fcat.

Varriance report for the site

Dear all
After running varriance calculation how can we consolidated varriance report for a plant.
Regards,
srihari.m

Hi
We are doing varinace calculation for Actual Cost vs Allocated actual cost same thing we are settling.
How can we get the variance report for the above as a cumulative.
One more thing when we are executing S_ALR_87013140 we are not getting any records
even after we had carried out variance calculation for site using KKS1.
Please tell me what settings i have to maintain for generating the report
Regards,
Srihari.M

Time Out error problem when i run the report for the whole plant

Dear all,
pls find the below coding, when i execute this report for the whole plant , it gives me time out error since it has to process huge database. pls suggest me in which part of my below coding i can improvise or any other better way to fetch the same result.
pls note that
i m using Views for querying.pls also note the comments given in Bold to understand the reason behind the coding.
Views used in are - ZVPOD and ZVPRDCONF.
START-OF-SELECTION.
Data: zstat type jest-stat.
data: stklocaf type mska-lgort.
data: stklocas type mska-lgort.
To collect the status of the production order by joining the ZVPOD and JEST table.
CLEAR it_ZVPRODDET.
SELECT DISTINCT ZVPOD~bukrs ZVPOD~aufnr ZVPOD~objnr
jest~stat ZVPOD~werks ZVPOD~arbpl ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN jest ON ZVPOD~objnr = jest~objnr
INTO CORRESPONDING FIELDS OF wa_ZVPRODDET where
plnbez in FGM and arbpl in wc and werks in plant
and SSAVD in eldate
and J_3AKORD2 in cups and jest~inact ne 'X'.
 APPEND wa_ZVPRODDET TO it_ZVPRODDET.
ENDSELECT.
SORT it_ZVPRODDET BY aufnr stat.
Loop thru Itab to check and delete the records from itab for the specified status.
LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
 IF wa_ZVPRODDET-stat = 'I0045' . " TECO - compl
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0009' . " CNF - Confirmed
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0012' . " DLV - Delivered
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0046' . " CLSD - Closed
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0076' . " DLFL - Del Flag
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'E0003' . " SCLS - Short Close
 CLEAR tj30t.
 SELECT SINGLE txt04
 FROM tj30t INTO tj30t-txt04
 WHERE stsma = 'PRDHOLD' AND
 estat = 'E0003' AND
 txt04 = 'SCLS' AND
 spras = 'EN'.
 IF sy-subrc = 0.
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ENDIF.
 ENDIF.
* Condition for Prod Order released - REL
 IF wa_ZVPRODDET-stat = 'I0002'.
 mreleased = 'Y'.
 else.
 mreleased = 'N'.
 endif.
 zstat = wa_ZVPRODDET-stat.
 IF mreleased = 'N'.
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr
 and stat = zstat.
 ENDIF.
ENDLOOP.
Loop thru the filtered ITAB to get all the production order details for the production order number specified in the where clause( zaufnr ) and populate another internal table.
 LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
 zaufnr = wa_zvproddet-aufnr.
 zarbid = wa_zvproddet-arbid.
 at new aufnr.
 SELECT DISTINCT * INTO CORRESPONDING FIELDS OF walnpln
 FROM zvpod where plnbez in FGM and arbpl in wc and SSAVD in
 eldate and werks in plant and J_3AKORD2 in cups and aufnr = zaufnr.
 APPEND walnpln TO itablnpln.
 endselect.
 endat.
 endloop.
 clear walnpln.

Looping thru Internal table and performs all the following calculations and inner loop
and also relevant querying.
Assume that ITABLNPLN holds appox. 8000 records.
LOOP AT itablnpln INTO walnpln.
 contot = 0.
 SELECT distinct * INTO CORRESPONDING FIELDS OF TABLE itablnp
 FROM zvprdconf where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 clear zvprdconf.
 SELECT single isdd
 FROM zvprdconf into zvprdconf-isdd
 where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 SELECT single isdz
 FROM zvprdconf into zvprdconf-isdz
 where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 IF sy-subrc EQ 0.
 Assume that ITABLNP holds appox. 30 records.
 loop at itablnp into walnp.
 contot = contot + walnp-J_3ALMNGA.
 move walnp-J_3ASIZE to walnpln-J_3ASIZE.
 move zvprdconf-isdd to walnpln-zdate.
 move zvprdconf-isdz to walnpln-ztime.
 endloop.
 walnpln-output = contot.
 endif.
 walnpln-wip = walnpln-menge - contot.
 if walnpln-werks = '1000'.
 stklocaf = '1050'.
 stklocas = '1060'.
 elseif walnpln-werks = '2000'.
 stklocaf = '2150'.
 stklocas = '2160'.
 endif.
 select single kunnr into walnpln-ship from vbpa where
 vbeln = walnpln-KDAUF and PARVW = 'WE'.
 zship = walnpln-ship.
 move zship to walnpln-ship.
 select single kalab into walnpln-zactqty from mska
 where matnr = walnpln-plnbez
 and j_3asize = walnpln-J_3AKORDX and LGORT = stklocaf.
 condense walnpln-kdauf.
 zsales = walnpln-kdauf.
 concatenate zsales 'S' into zso.
 select single kalab into walnpln-zsndqty from mska
 where matnr = walnpln-plnbez
 and j_3asize = walnpln-J_3AKORDX and LGORT = stklocas
 and J_4KSCAT = zso.
 zmatn = walnpln-plnbez.
 zsale = walnpln-KDAUF.
 walnpln-kdauf = zsale.
 walnpln-plnbez = zmatn.
 zcust = walnpln-kunnr.
 walnpln-kunnr = zcust.
 select single bezei into walnpln-season from TVV2T where
 kvgr2 = walnpln-kvgr2 and SPRAS = 'E'.
 select single bezei into walnpln-shipmode from T173T where
 vsart = walnpln-vsart and SPRAS = 'E'.
 STRL = strlen( walnpln-j_3akord2 ).
 if strl = 4.
 move walnpln-j_3akord2 to walnpln-j_3akord3.
 clear walnpln-j_3akord2.
 endif.
 move zremk to walnpln-remk.
 MODIFY itablnpln FROM walnpln.
 contot = 0.
 clear itablnp.
 ENDLOOP.
 PERFORM build_fieldcatalog.
 PERFORM build_layout.
 PERFORM display_alv_report.

Hi raja,
Plese go through the suggessitions.
1.avoide the select ...endselect. write the below select
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X'.
IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
ENDIF.
2..first of all dont delete a record inside the loop. instead use the Field symobols.
have u obsereved you code in the loop!!!!. wht u r doing..
u r removing the same record which u in the loop..
If u wanto delete the entires with check to stat... then.. why dont u put the STAT field in Wher e condition..? by this you reduce the data base select time..
Now the select query is like the below....
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X' AND
 ( STAT <> 'I0045' AND
 STAT <> 'I0045' AND
 STAT <> 'I0009' AND
 STAT <> 'I0012' AND
 STAT <> 'I0046' AND
 STAT <> 'I0076' AND
 STAT <> 'E0003' ).
IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
ENDIF.
3. WHT IS MEANING OF THE SELECT
 CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
 ESTAT = 'E0003' AND
 TXT04 = 'SCLS' AND
 SPRAS = 'EN'.
IF SY-SUBRC = 0.
 DELETE IT_ZVPRODDET WHERE AUFNR = WA_ZVPRODDET-AUFNR.
ENDIF........ IN WHERE CONDION U R GIven all are constant values right?..
why u need select it inside the loop.. u can write before the SELECT from ZVPOD..
that why first checke this field then go for fur thure selects..
now u r code looks like this....
CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
 ESTAT = 'E0003' AND
 TXT04 = 'SCLS' AND
 SPRAS = 'EN'.
IF SY-SUBRC = 0.
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
 FROM ZVPOD
 INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
 INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
 WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X' AND
 JEST~STAT <> 'I0045' AND
 JEST~STAT <> 'I0045' AND
 JEST~STAT <> 'I0009' AND
 JEST~STAT <> 'I0012' AND
 JEST~STAT <> 'I0046' AND
 JEST~STAT <> 'I0076' AND
 JEST~STAT <> 'E0003' ).
 IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
 ENDIF.
ENDIF.
there are so many select inside the loop...... please Delete all of them.... write them be for the loop.......using the FOR ALL ENTRIES.....
THEN LOOP THE TABLE USING THE WHERE CONDITIONS.
Plese write u updated code here again..

How to create a report with data using the Crystal Reports for Java SDK

Hi,
How do I create a report with data that can be displayed via the Crystal Report for Java SDK and the Viewers API?
I am writing my own report designer, and would like to use the Crystal Runtime Engine to display my report in DHTML, PDF, and Excel formats. I can create my own report through the following code snippet:
ReportClientDocument boReportClientDocument = new ReportClientDocument();
boReportClientDocument.newDocument();
However, I cannot find a way to add data elements to the report without specifying an RPT file. Is this possible? I seems like it is since the Eclipse Plug In allows you to specify your database parameters when creating an RPT file.
is there a way to do this through these packages?
com.crystaldecisions.sdk.occa.report.data
com.crystaldecisions.sdk.occa.report.definition
Am I forced to create a RPT file for the different table and column structures I have?
Thank you in advance for any insights.
Ted Jenney

Hi Rameez,
After working through the example code some more, and doing some more research, I remain unable to populate a report with my own data and view the report in a browser. I realize this is a long post, but there are multiple errors I am receiving, and these are the seemingly essential ones that I am hitting.
Modeling the Sample code from Create_Report_From_Scratch.zip to add a database table, using the following code:
<%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.document.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.definition.*"%>
<%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
<%@ page import = "com.crystaldecisions.report.web.viewer.*"%>
<%
try {
 ReportClientDocument rcd = new ReportClientDocument();
 rcd.newDocument();
// Setup the DB connection
 String database_dll = "Sqlsrv32.dll";
 String db = "qa_start_2012";
 String dsn = "SQL Server";
 String userName = "sa";
 String pwd = "sa";
 // Create the DB connection
 ConnectionInfo oConnectionInfo = new ConnectionInfo();
 PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes();
 // Set new table logon properties
 PropertyBag oPropertyBag2 = new PropertyBag();
 oPropertyBag2.put("DSN", dsn);
 oPropertyBag2.put("Data Source", db);
 // Set the connection info objects members
 // 1. Pass the Logon Properties to the main PropertyBag
 // 2. Set the Server Description to the new **System DSN**
 oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, oPropertyBag2);
 oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsn);
 oPropertyBag1.put("Database DLL", database_dll);
 oConnectionInfo.setAttributes(oPropertyBag1);
 oConnectionInfo.setUserName(userName);
 oConnectionInfo.setPassword(pwd);
 // The Kind of connectionInfos is CRQE (Crystal Reports Query Engine).
 oConnectionInfo.setKind(ConnectionInfoKind.CRQE);
// Add a Database table
 String tableName = "Building";
 Table oTable = new Table();
 oTable.setName(tableName);
 oTable.setConnectionInfo(oConnectionInfo);
 rcd.getDatabaseController().addTable(oTable, null);
 catch(ReportSDKException RsdkEx) {
 out.println(RsdkEx);
 catch (Exception ex) {
 out.println(ex);
%>
Throws the exception
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
There was other sample code on SDN which suggested the following - adding the table after calling table.setDataFields() as in:
 String tableName = "Building";
 String fieldname = "Building_Name";
 Table oTable = new Table();
 oTable.setName(tableName);
 oTable.setAlias(tableName);
 oTable.setQualifiedName(tableName);
 oTable.setDescription(tableName) ;
 Fields fields = new Fields();
 DBField field = new DBField();
 field.setDescription(fieldname);
 field.setHeadingText(fieldname);
 field.setName(fieldname);
 field.setType(FieldValueType.stringField);
 field.setLength(40);
 fields.add(field);
 oTable.setDataFields(fields);
 oTable.setConnectionInfo(oConnectionInfo);
 rcd.getDatabaseController().addTable(oTable, null);
This code succeeds, but it is not clear how to add that database field to a section. If I attempt to call the following:
FieldObject oFieldObject = new FieldObject();
 oFieldObject.setDataSourceName(field.getFormulaForm());
 oFieldObject.setFieldValueType(field.getType());
 // Now add it to the section
 oFieldObject.setLeft(3120);
 oFieldObject.setTop(120);
 oFieldObject.setWidth(1911);
 oFieldObject.setHeight(226);
 rcd.getReportDefController().getReportObjectController().add(oFieldObject, rcd.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0), -1);
Then I get an error (which is not unexpected)
com.crystaldecisions.sdk.occa.report.lib.ReportDefControllerException: The field was not found.---- Error code:-2147213283 Error code name:invalidFieldObject
How do I add one of the table.SetDataFields() to my report to be displayed?
Are there any other pointers or suggestions you may have?
Thank you

Genearate a Report for the following data

Hi All
The following is of my requirement
Selection Screen Should be as follows:
Plant (required) QALS-WERK
Storage Location MCHB-LGORT
Material Number QALS-MATNR
Batch Number MCHB-MATNR
MRP Controller MARC-DISPO
Inspection Lot Number QALS-PRUEFLOS
Inspection Lot Creation Date QALS-ENSTEHDAT
Inspection Lot Origin QALS-HERKUNFT
PO Number QALS-EBELN
Vendor # EKKO-LIFNR
Goods Receipt Date MKPR-BUDAT
Delivery Number QALS-KTEXTLOS
Marked in House Date
Sterile Load # ZC012-STBAT
Supplying Plant EKKO-RESWK
Profit Center QALS-PRCTR
Radio Buttons for Selection Screen:
 Show all stock (not just Q stock)
 Show only past due stock (GR Date + GR processing time > today)
 Include Serial Numbers
Fields for report:
Plant QALS-WERK
STO/PO QALS-EBELN
Delivery/Production Order # QALS-KTEXTLOS
Sterile Load # ZC013-STTYP
Inspection Lot Number QALS-PRUEFLOS
Material QALS-MATNR
Old Material MARA-BISMT
Serial #s (all serial #s with material ITOB-SERNR
batch combination)
Batch QALS-CHARG
Sloc (all SLOCs with Q status items) MCHB-LGORT
Batch Exp Date DFBATCH-MHD_IO
Quantity (in each SLOC) MCHB-CINSM
Profit Center QALS-PRCTR
Date Marked In House ZTMODE-TDATE
GR Date QALS-ENSTEHDAT
Expected GR Processing Time MARC-WEBAZ
Date Moved to NCMR MKPF-BLDAT
Days in House System date ZTMODE-TDATE
Days in QI System date - QALS-ENSTEHDAT
Days from QI QALS-ENSTEHDAT - MKPF-BLDAT
Days in NCMR System date - MKPF-BLDAT
MRP Controller MARC-DISPO
MRP Controller Name T024D-DSNAM
Standard Cost MBEW-STPRS
Extended Standard Cost MCHB-CINSM * MBEW-STPRS
How we can develop a report for the above, because they havn't given any conditional checking. Supress if any Ztables used.
i would appreciate if you can send an earliest reply and reward points for the same.
if any queries just reply me i can clarify.
Regards
Prabhu

Hi Prabhakar,
Well you can opt for ALV display...
You want to generate report based on plant data..
Once the user enters the plant, you can extract the remaining info from table MARA, QALS, EKKO.
The radio buttons will decide your selection critera.
I dont think any functional guy will give you everthing spoon feeded. You will have to explore those tables and the relevant fields.
In case you are finding it to difficult to get the relations between the tables or finding list of tables,
i shall send u docs which will help u solve the problem.
Give me ur email id
Regards,
Tanveer.
Mark helpful answers
Message was edited by: Tanveer Shaikh

Parameter REPORT for the Report Web item in the Web template is empty or mi

Hello,
I tried to create a Web-Template (WAD). By executing the report, I get the selection screnn, but by confirming the selection I get the following message:
Web Item Report Error
Web template error in specifications for the Web item report
Parameter REPORT for the Report Web item in the Web template is empty or missing
Use the BEx Web Application Designer to add parameter REPORT to the report Web item in the Web template, and assign a report name to the parameter
Contact your system administrator. This error was recorded
What can I do to solve this error?
Thanks!
XmchX

As DP_1 Type Query_view_Data_provider, I have assinged a Query Designer Query wich works fine, if I execute it as QDR.
The entry Query_view_Data_provider makes sense for me, but what do I need to maintain for the type "Filter"?
Thanks!
XmchX

Help needed on balance sheet plan report for the current year

Hi BW gurus,
I have a problem with reporting.
I need to get Balance-Sheet Plan Reports for the Planned year and for the current year.
To get the report for the planned year its straight forward just by restricting 0balance by the version to 1 and the valuetype 20.
But I have a problem with the current year report.
I have fiscal year and the company code as the variables.
The report should be like this.
If we need the report as of today(July 26 2006),we may input 2006 for the fiscal year variable.
And the 0balance for the twelve fiscal periods should be as follows
From jan 2006 to june 2006(fiscal periods) it should have only the actuals
From july 2006 to dec 2006(fiscal periods) it should have only the plan
I have already built a query by having two restricted keyfigures on 0balance.
One by restricting version and valuetype 0 and 10 , and the other with 1 and 20.
But in the report I am getting two columns of data for each fiscal period for 12 periods.0balance with actuals and 0balance with plan.
But I need to get 0balance with actuals from jan to june(individually for each fiscal period columnwise),and 0balance with plan from july to dec(individually for each fiscal period columnwise).
Hope you people can visualize my report.
Please help me ASAP.
Any kind of help is appreciated.
My mail id is [email protected]
Thanks in advance
Regards
Sam Mathew

Hi Sam,
Did u get this issue solved. I am having the same issue now. Can u please let me know if u have a solution for this.
Thanks
Prasad

Error at the moment to send the report for the printer.

When I execute a report for the Report Builder (Oracle Developer Suite 10g), the report is generated successfully, but, at the moment to send for the printer errors occur: REP-0069/REP-57054/REP-50157 (error 1848).
Please, help me!!!
Nádia

Hi,
We had the same problem at my organization. Our DBA had to install a patch:
To implement the solution, please apply the patchset to upgrade to 10.1.2.2.0.
To obtain a patchset from MetaLink:
1) Click on Patches & Updates.
2) Click on Simple Search
3) Select your product, release and platform.
4) Patch number is 4960210
Description PLACEHOLDER BUG FOR AS/DS 10G R2 PATCH SET 2 10.1.2.2
Product Oracle Development Tools
Release 10.1.2.2
The Patchset 4960210 is a patch for the Application Server AND Developer Suite
5) Read any applicable notes before downloading, then click the Download button.
Note: Please review the Readme file for instructions on how to install the patchset.
you should launch the installer with the executable setup.exe provided in the patchset, it could shows up a message indicating nothing was upgraded, but the release should be modified to 10.1.2.2
Hope that helps

Developed a report for the daily production done.

hi experts,
please give me tables and fields for following report, and also exlain me briefly,
Developed a report for the daily production done.
thanks in advance,
radhakrishna

Hi Prabhakar,
Well you can opt for ALV display...
You want to generate report based on plant data..
Once the user enters the plant, you can extract the remaining info from table MARA, QALS, EKKO.
The radio buttons will decide your selection critera.
I dont think any functional guy will give you everthing spoon feeded. You will have to explore those tables and the relevant fields.
In case you are finding it to difficult to get the relations between the tables or finding list of tables,
i shall send u docs which will help u solve the problem.
Give me ur email id
Regards,
Tanveer.
Mark helpful answers
Message was edited by: Tanveer Shaikh

What's the best cover for the new iPad (3rd generation). I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

What's the best cover for the new iPad (3rd generation). I've been told by a store employee (university bookstore) that there are problems with the magnetic covers on the newest iPad. Suggestions?

The best cover is the one that suites your needs. Try Google. There are dozens on the market.
As for the Apple Smart Cover, it does work with the new iPad. There are a few reported issues with it, but that doesn't come close to representing the totality of folks with it.

Documetations about the complex interface for business partner

Hi Folks,
did anyone knows, were I can find some documentations about "how to use the complex interface for business partner"?
Kind regards
Thomas

The above problems through Notes: 810634 has been resolved!
The return message is "Instance BJXE001005 belonging to object type BusinessPartnerFS was created".
But the BP "BJXE001005" has not been established in CRM.
How to i?
When i use parameters "roles", the return message is "No update is defined for BP role"?
How to i?
Thanks you!
Do you have any examples I reference to the code?
Thanks a lot.
Edited by: Ken.Li on Apr 13, 2008 9:05 AM
Edited by: Ken.Li on Apr 13, 2008 10:17 AM
Edited by: Ken.Li on Apr 13, 2008 10:33 AM

Problem in designing the complex report for the client requirement

Similar Messages

Maybe you are looking for