Problem in different mapping according to XPATH in Inteface determination

Hi Gurus of XI,
I have an input and according to a flag in it I need to execute 2 mappings (if flag is 1 -> mapping A else mapping B) and hence post an IDOC [mapping A / B uses the same IDOC].
I have a single sender and a single receiver, hence during my interface determination i am trying to specify the condition in the XPATH condition editor and hence assigning the specific mapping.
But an error pops up saying "occurs more than once as inbound interface".
Is there any work around for the same ?
I am trying to avoid a BPM here.
Regards,
ShabZ

Hi Shabz,
You cannot have more than One idoc, but you can handle this in the mapping.
if you use XSLT mapping, make a complete copy of the Node and apply the condtion (for flag A or B).
this way you can go ahead without any routing or interface selection in Int Dir.
Regards
Vishnu

Similar Messages

Problem using different Map key types in one class

I'm running Kodo 2.3.3. It seems I can only have one Map key types for all
maps in a class. For example, if I have two maps in a class, their keys
must be of the same type.
Is there a plan to remove this limitation soon?
Thanks,

Abe White wrote:
Kodo should generate a separate table for each Map. We have internal tests
that use classes with Map fields using a lot of different key/value type
combinations, so there shouldn\'t be a problem.It looks like two maps (keyValues and versions) are sharing the same
table. Here is the table generated by schematool (db: Oracle 8.1.7):
desc persistentmotiveresourcebean_x;
Name Null? Type
ID_JDOIDX VARCHAR2(255)
JDOKEYX NUMBER
KEYVALUESX VARCHAR2(255)
VERSIONSX VARCHAR2(255)
==========================================================================
Following is the simplified code I run:
-----------internal.jdo--------------------------------------
<?xml version=\"1.0\"?>
<jdo>
<package
name=\"com.motive.services.resourceManagementService.internal\">
<class name=\"PersistentMotiveResourceBean\"
identity-type=\"application\"
objectid-class=\"com.motive.model.PrimaryKey\">
<field name=\"id\" primary-key=\"true\"/>
<field name=\"versions\">
<map key-type=\"java.lang.Float\"
embedded-key=\"true\" value-type=\"java.lang.String\"
embedded-value=\"true\"/>
</field>
<field name=\"keyValues\">
<map key-type=\"java.lang.String\"
embedded-key=\"true\" value-type=\"java.lang.String\"
embedded-value=\"true\"/>
</field>
</class>
</package>
</jdo>
Java source:
-----------PersistentMotiveResourceBean.java---------
package com.motive.services.resourceManagementService.internal;
import java.util.HashMap;
public class PersistentMotiveResourceBean
private String id;
private String name;
private HashMap versions;
private HashMap keyValues;
public PersistentMotiveResourceBean()
public String getId() { return id; }
public void setId(String id) { this.id = id; }
public String getName() { return name; }
public void setName(String name) { this.name = name; }
public HashMap getVersions() { return versions; }
public void setVersions(HashMap versions) { this.versions = versions; }
public HashMap getKeyValues() { return keyValues; }
public void setKeyValues(HashMap keyValues) { this.keyValues =
keyValues; }
----------------PrimaryKey.java-------------------------------------
package com.motive.model;
import java.io.Serializable;
public class PrimaryKey implements Serializable
public String id;
public PrimaryKey ()
public PrimaryKey (String id)
this.id = id;
public boolean equals (Object ob)
if (this == ob) return true;
if (!(ob instanceof PrimaryKey)) return false;
PrimaryKey o = (PrimaryKey) ob;
return (this.id == o.id);
public int hashCode ()
return id.hashCode();
public String toString ()
return id;

Same sender (websphere) different messages different mapping and receiver

Hi PI experts,
Your opinion could lead us to the best solution. Thanks in advance for your valuable time on this.
Here is the scenario that I would like to have your input. We have a solution, which takes in orders from North America and European countries (many sites) by WebSphere. Each order messages is sent over to PI via SOAP where PI converts it to IDOC and forwards it to SAP AFS system (SOAP to IDOC and 1:1 mapping). The solution is up running as expected in production.
Now we need to automate orders for our Asia sites. The backend is on Microsoft Navision system. On the receiving side, our Asia colleagues like to have files sent over to a SFTP server (with different folder for each country). So it is SOAP to SFTP scenario.
In short the two scenarios are SOAP to IDOC and SOAP to SFTP. Should we combine those two into one solution or have a separate interface for each? What will be the pros and cons from design, performance and production support perspective?
Thanks,
Shawn

Hello Shawn!
You may created all the communication channels, SOAP IDOC and SEEB (since native File adapter does not support SFTP) and then create the scenario with both interfaces mapped on the RECEIVER DETERMINATION:
CondA -> Interface A (IDOC)
CondB -> Interface B (SEEB)
The conditions are xPath queries based on the received XML, which would allow you to send the message to different places according to the message's context.
For more information, please check the help page below.
Description of Object Types
http://help.sap.com/saphelp_nwpi71/helpdata/en/46/8015de950e6be3e10000000a155369/frameset.htm
Receiver Determination
http://help.sap.com/saphelp_nwpi71/helpdata/en/46/8015de950e6be3e10000000a155369/frameset.htm

Problem with reverse mapping

Hi!
I am having a problem with reverse mapping. Here's what I do (copying the
generated files to a correct directory omitted):
% rd-schemagen -properties jdo.properties -file schema.xml
% rd-reversemappingtool -properties jdo.properties -package testi
schema.xml
% javac -d build/classes src/testi/*.java
% rd-importtool -properties jdo.properties src/testi/testi.mapping
Here's a part of the output:
<clip>
2958 INFO [main] jdbc.Schema - Found existing table "Kirja" for schema
"null".
3002 INFO [main] jdbc.Schema - Found existing table "Kustantaja" for
schema "n
ull".
3047 INFO [main] jdbc.SQL - [C: 5948361; T: 15336018]close
3125 INFO [main] jdbc.SQL - [C: 2478770; T: 15336018]open:
jdbc:mysql://localh
ost/kirjakauppa (root)
3129 INFO [main] jdbc.Schema - Found existing table "Kirjailija" for
schema "n
ull".
3140 INFO [main] jdbc.SQL - [C: 2478770; T: 15336018]close
3187 INFO [main] jdbc.SQL - [C: 7529545; T: 15336018]open:
jdbc:mysql://localh
ost/kirjakauppa (root)
3193 INFO [main] jdbc.Schema - Found existing table "Kirjoittaja" for
schema "
null".
3225 INFO [main] jdbc.SQL - [C: 7529545; T: 15336018]close
Exception in thread "main" javax.jdo.JDOFatalInternalException:
java.lang.Illega
lArgumentException: You are attempting to link to a primary key column in
table "Kirja" in a foreign key that is already linked to primary key
columns in table "Kirjailija".
NestedThrowables:
java.lang.IllegalArgumentException: You are attempting to link to a primary
key column in table "Kirja" in a foreign key that is already linked to
primary key c
olumns in table "Kirjailija".
at
com.solarmetric.rd.kodo.impl.jdbc.meta.Mappings.createClassMapping(Ma
ppings.java:160)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(M
appingRepository.java:279)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMetaData(
MappingRepository.java:147)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(M
appingRepository.java:158)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.getMapping(I
mportTool.java:126)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.importMappin
gs(ImportTool.java:57)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.run(ImportTo
ol.java:408)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.main(ImportT
ool.java:385)
NestedThrowablesStackTrace:
java.lang.IllegalArgumentException: You are attempting to link to a primary
key column in table "Kirja" in a foreign key that is already linked to
primary key c
olumns in table "Kirjailija".
at
com.solarmetric.rd.kodo.impl.jdbc.schema.ForeignKey.join(ForeignKey.j
ava:238)
at
com.solarmetric.rd.kodo.impl.jdbc.schema.SchemaGenerator.generateFore
ignKeys(SchemaGenerator.java:625)
at
com.solarmetric.rd.kodo.impl.jdbc.schema.DynamicSchemaFactory.findTab
le(DynamicSchemaFactory.java:111)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.map.BaseClassMapping.fromMappi
ngInfo(BaseClassMapping.java:113)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.Mappings.createClassMapping(Ma
ppings.java:144)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(M
appingRepository.java:279)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMetaData(
MappingRepository.java:147)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(M
appingRepository.java:158)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.getMapping(I
mportTool.java:126)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.importMappin
gs(ImportTool.java:57)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.run(ImportTo
ol.java:408)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.main(ImportT
ool.java:385)
</clip>
Here's what MySQLCC gives for creation statement of the tables:
<clip>
# Host: localhost
# Database: kirjakauppa
# Table: 'Asiakas'
# CREATE TABLE `Asiakas` (
`Asiakas_id` int(11) NOT NULL auto_increment,
`Nimi1` varchar(50) default NULL,
`Nimi2` varchar(50) default NULL,
`KatuOsoite` varchar(50) default NULL,
`Postiosoite` varchar(50) default NULL,
`Email` varchar(50) default NULL,
`Puhelin` varchar(50) default NULL,
`Fax` varchar(50) default NULL,
`Salasana` varchar(50) default NULL,
`ExtranetTunnus` varchar(50) default NULL,
PRIMARY KEY (`Asiakas_id`),
KEY `Asiakas_id` (`Asiakas_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Kirja'
# CREATE TABLE `Kirja` (
`Kirja_id` int(11) NOT NULL auto_increment,
`Kustantaja_id` int(11) default NULL,
`Nimi` varchar(60) default NULL,
`Nimi2` varchar(60) default NULL,
`ISBN` varchar(50) default NULL,
`Kieli` varchar(50) default NULL,
`Kansi_URL` varchar(50) default NULL,
`Sisalto_URL` varchar(50) default NULL,
`Tukkuhinta` decimal(10,2) default NULL,
`Kuluttajahinta` decimal(10,2) default NULL,
`Varastokpl` int(11) default NULL,
PRIMARY KEY (`Kirja_id`),
KEY `Kirja_id` (`Kirja_id`),
KEY `Kustantaja_id` (`Kustantaja_id`),
FOREIGN KEY (`Kustantaja_id`) REFERENCES `kirjakauppa.Kustantaja`
(`Kustantaja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Kirjailija'
# CREATE TABLE `Kirjailija` (
`Kirjailija_id` int(11) NOT NULL auto_increment,
`Sukunimi` varchar(50) default NULL,
`Etunimi` varchar(50) default NULL,
`Maa` varchar(50) default NULL,
`Kirjailija_URL` varchar(50) default NULL,
PRIMARY KEY (`Kirjailija_id`),
KEY `Kirjailija_id` (`Kirjailija_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Kirjoittaja'
# CREATE TABLE `Kirjoittaja` (
`Kirjoittaja_id` int(11) NOT NULL auto_increment,
`Kirjailija_id` int(11) NOT NULL default '0',
`Kirja_id` int(11) NOT NULL default '0',
PRIMARY KEY (`Kirjoittaja_id`),
KEY `Kirjailija_id` (`Kirjailija_id`),
KEY `Kirja_id` (`Kirja_id`),
FOREIGN KEY (`Kirjailija_id`) REFERENCES `kirjakauppa.Kirjailija`
(`Kirjailija_id`),
FOREIGN KEY (`Kirja_id`) REFERENCES `kirjakauppa.Kirja` (`Kirja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Koodi'
# CREATE TABLE `Koodi` (
`Koodi_id` int(11) NOT NULL auto_increment,
`Koodi` varchar(50) default NULL,
`Tyyppi` varchar(50) default NULL,
`Arvo` varchar(50) default NULL,
PRIMARY KEY (`Koodi_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Kustantaja'
# CREATE TABLE `Kustantaja` (
`Kustantaja_id` int(11) NOT NULL auto_increment,
`Nimi` varchar(80) default NULL,
`Maa` varchar(50) default NULL,
`Kustantaja_URL` varchar(50) default NULL,
`KirjaLkm` int(11) default NULL,
PRIMARY KEY (`Kustantaja_id`),
KEY `Kustantaja_id` (`Kustantaja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Luokittelu'
# CREATE TABLE `Luokittelu` (
`Luokittelu_id` int(11) NOT NULL auto_increment,
`Luokka_id` int(11) NOT NULL default '0',
`Kirja_id` int(11) NOT NULL default '0',
PRIMARY KEY (`Luokittelu_id`),
KEY `Luokka_id` (`Luokka_id`),
KEY `Kirja_id` (`Kirja_id`),
FOREIGN KEY (`Luokka_id`) REFERENCES `kirjakauppa.Luokka` (`Luokka_id`),
FOREIGN KEY (`Kirja_id`) REFERENCES `kirjakauppa.Kirja` (`Kirja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Luokka'
# CREATE TABLE `Luokka` (
`Luokka_id` int(11) NOT NULL auto_increment,
`Luokka` varchar(50) default NULL,
PRIMARY KEY (`Luokka_id`),
KEY `Luokka_id` (`Luokka_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Myyja'
# CREATE TABLE `Myyja` (
`Myyja_id` int(11) NOT NULL auto_increment,
`Myyja` varchar(50) default NULL,
`Myyja_URL` varchar(50) default NULL,
PRIMARY KEY (`Myyja_id`),
KEY `Myyja_id` (`Myyja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Tilaus'
# CREATE TABLE `Tilaus` (
`Tilaus_id` int(11) NOT NULL auto_increment,
`Asiakas_id` int(11) NOT NULL default '0',
`Myyja_id` int(11) default NULL,
`TilausPvm` timestamp(14) NOT NULL,
`EnsimmToimitusPvm` timestamp(14) NOT NULL,
`ViimToimitusPvm` timestamp(14) NOT NULL,
`Tila` int(11) NOT NULL default '0',
`Mk` decimal(10,2) default NULL,
PRIMARY KEY (`Tilaus_id`),
KEY `Asiakas_id` (`Asiakas_id`),
KEY `Myyja_id` (`Myyja_id`),
KEY `Tilaus_id` (`Tilaus_id`),
FOREIGN KEY (`Asiakas_id`) REFERENCES `kirjakauppa.Asiakas`
(`Asiakas_id`),
FOREIGN KEY (`Myyja_id`) REFERENCES `kirjakauppa.Myyja` (`Myyja_id`)
) TYPE=InnoDB;
# Host: localhost
# Database: kirjakauppa
# Table: 'Tilausrivi'
# CREATE TABLE `Tilausrivi` (
`TilausRivi_id` int(11) NOT NULL auto_increment,
`Tilaus_id` int(11) NOT NULL default '0',
`Kirja_id` int(11) NOT NULL default '0',
`TilausLkm` int(11) default NULL,
`Ahinta` decimal(10,2) default NULL,
`Alepros` float default NULL,
`Mk` decimal(10,2) default NULL,
`ToimitettuLkm` int(11) default NULL,
`ToimitusPvm` timestamp(14) NOT NULL,
`ViimToimitusPvm` timestamp(14) NOT NULL,
`Tila` int(11) NOT NULL default '0',
PRIMARY KEY (`TilausRivi_id`),
KEY `Tilaus_id` (`Tilaus_id`),
KEY `Kirja_id` (`Kirja_id`),
FOREIGN KEY (`Tilaus_id`) REFERENCES `kirjakauppa.Tilaus` (`Tilaus_id`),
FOREIGN KEY (`Kirja_id`) REFERENCES `kirjakauppa.Kirja` (`Kirja_id`)
) TYPE=InnoDB;
</clip>
I can find the original creation script if it is necessary.
My guess was that I need to define the foreign keys myself into the
generated schema.xml This is stated in the manual. However, this did not
help, although it changed the stack trace a little (it complains about
different classes than before):
<clip>
Exception in thread "main" javax.jdo.JDOFatalInternalException:
java.lang.IllegalArgumentException: You are attempting to link to a primary
key column in table "Myyja" in a foreign key that is already linked to
primary key columns in table "Asiakas".
NestedThrowables:
java.lang.IllegalArgumentException: You are attempting to link to a primary
key column in table "Myyja" in a foreign key that is already linked to
primary key columns in table "Asiakas".
at
com.solarmetric.rd.kodo.impl.jdbc.meta.Mappings.createFieldMapping(Mappings.java:208)
</clip>
I don't think I fully understand the error message, what exactly is wrong
here? How can I fix it?
Here's a sample of the changes I made to schema.xml:
- added the name - attribute to schema (it was missing)
<schema name="kirjakauppa">
- added the foreign key elements according to the table creation statements
given above
<fk name="Kustantaja_id" to-table="Kustantaja" column="Kustantaja_id"/>
etc...
-Antti

On Mon, 16 Jun 2003 17:55:35 -0500, Abe White <[email protected]>
wrote:
It seems the last three options are being ignored - I still get a
mapping
file with schema names in front of tables (e.g. kirjakauppa.Asiakas, not
Asiakas),That, unfortunately, is impossible to turn off. The -useSchemaName
option controls whether the schema name is included as part of the
generated class name; it doesn't affect the mapping data that is
generated. What problems does including the schema name in the mapping
data cause?
rd-importtool -properties jdo.properties gensrc/testi/testi.mapping0 INFO [main] kodo.MetaData - Parsing metadata resource
"file:/home/akaranta/work/kurssit/jdo/Harjoituskoodi/kirjakauppa/gensrc/testi/testi.mapping".
Exception in thread "main"
com.solarmetric.rd.kodo.meta.JDOMetaDataNotFoundException: No JDO metadata
was found for type "class testi.Asiakas".
FailedObject:class testi.Asiakas
at
com.solarmetric.rd.kodo.meta.JDOMetaDataRepositoryImpl.getMetaData(JDOMetaDataRepositoryImpl.java:126)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMetaData(MappingRepository.java:184)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.MappingRepository.getMapping(MappingRepository.java:197)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.getMapping(ImportTool.java:128)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.importMappings(ImportTool.java:60)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.run(ImportTool.java:400)
at
com.solarmetric.rd.kodo.impl.jdbc.meta.compat.ImportTool.main(ImportTool.java:377)
This exception goes away if I edit the schema name out of the mapping
file from all classes.
separate classes are being generated for join tables with
primary keysDo these join tables have an extra primary key column? TheYes, they do. Ok, now I know where the problem is.
-primaryKeyOnJoin flag tells Kodo to ignore a join table with a primary
key on the join columns. But Kodo can't handle join tables with extra
column(s) just for a primary key identifier. This isn't a limitation of
the reverse mapping tool, it's a limitation of Kodo. Kodo wouldn't know
what to insert in those extra primary key column(s) when adding membersWhy not? If it can handle single numeric pk columns when making the
generated classes use data store identity, it has to generate something to
those columns. I can't see why this is different.
That is simply out of curiosity - the next thing fixed my problem:
to the join table. Of course, if the primary key is an auto-increment or
something where Kodo can ignore it for inserts, you can just remove the
<column> elements and the <pk> element from your .schema file and the
reverse mapping tool will map it as a join table appropriately.It is auto-increment, so I did this and it worked. Thanks.
, and application id is used for all classes.Are your primary keys on single, numeric columns? Kodo uses Java longsYes (int in MySQL), so that should not be a problem. They are also auto-
incremented. This seems to be the only real problem remaining with this
schema.
-Antti

Different mapping programs for same source and target

Hi All,
I have to map the incoming idoc to xml messages.
But based on customer numbers in incoming idoc i have to use different mapping programs and map to same xml messages.
1 source message - n mapping programs - 1 target message
(based on cust numbers)
I dont want to harcode the customer numbers to find out the mapping programs.
Can anyone guide me in this on how to achieve this functionality...
thanks
Giridhar

Hi,
have you tried to use Conditions in the Interface Determination?
You can add multiple lines in the 'Configured Inbound Interfaces' and attach different mappings to each of them by picking a condition (basically using an XPath Expression).
Check this Help Document,
the section 'Multiple Identical Inbound Interfaces with Conditions' describes what I believe is your scenario.<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/42/ea20e737f33ee9e10000000a1553f7/frameset.htm">Multiple Identical Inbound Interfaces with Conditions</a>
regards,
Peter

Funny problem with the mapping

Dear All,
I am facing with a funny problem with the mapping.
I am working on a scenario in which Invoice IDOC created in R/3 will be posted to XI and then in XI, mapping are done to create an XML file out of that IDOC.
In the Idoc, there is a segment E1EDKA1 which is getting created multiple times for different partners alongwith their details. The fields in E1EDKA1 segment are: PARVW,PARTN LIFNR etc.
In the output I just want LIFNR number where PARVW = RE or RS.
I have done the required mapping and when I am testing the mapping its giving me the required results correctly but when I make this scenario live then in real-time, the output XML file has no value for LIFNR.
Can anybody guide me out why is it happening tht during mapping testing its giving the correct result but at real time the mapping is returing no value.
Warm Regards,
N.Jain

Hi Nishant,
Are you sure the test data which you are using while testing the mapping in IR and the one which comes when you test real time is the same?
The data which comes real time. Copy the source payload and then test in mapping. See if you get the right data which you expect. If you do then theres some problem.
Now also go to the same message and in trace you can find out the GUID of the mapping program which is used.
Go to RWB - Last button..not sure what the name is .. something similar to Cache.. Find your mapping program and see if the GUID Matches. If the GUID matches then it is okay.
Also try to do the following..
Reactive the MM/IM.
Go to ID. Make some dummy change in Interface determination and then activate it.
Check the cache notification to make sure if the cache is updated.
If the above doesnt help you let us know.
Regards,
Sumit

Problem with multi-mapping

Hello everybody,
we got a problem with multi-mapping.
Source and target message-type are the same:
<xsd:element name="MY_MESSAGE_TYPE">
_<xsd:element name="BUSTRANS">
__<xsd:element name="CHILD_1" maxOccurs="unbounded">
___<xsd:element name="SUB_CHILD_1" maxOccurs="unbounded">
____<xsd:element name="SUB_CHILD_1_NAME" type="xsd:string">
__<xsd:element name="CHILD_2" maxOccurs="unbounded">
___<xsd:element name="SUB_CHILD_2" maxOccurs="unbounded">
____<xsd:element name="SUB_CHILD_2_NAME" type="xsd:string">
The requirements are:
<xsd:element name="MY_MESSAGE_TYPE"> should be created as often as <xsd:element name="CHILD_2"..> occurs
a) so we mapped
CHILD_2 -> MY_MESSAGE_TYPE
BUSTRANS -> CopyValue -> BUSTRANS
CHILD_1 -> CopyValue -> CHILD_1
SUB_CHILD_1 -> CopyValue -> SUB_CHILD_1
SUB_CHILD_1_NAME -> CopyValue -> SUB_CHILD_1_NAME
CHILD_2 -> splitByValue(eachValue) -> CHILD_2
The problem is:
If we duplicated
a) SUB_CHILD_1
b) subtree CHILD_2 (so 2 messages will be generated)
for testing, SUB_CHILD_1 only occurs 1 time! But we need it in every target message as often as it occurs in the source message.
For your testing, here is the datatype:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://enbw.com/XI/SAPCRMB2B/javamappings_test" targetNamespace="http://mynamespace.com/XI/SAPCRMB2B/javamappings_test">
<xsd:complexType name="MultipleBookingOrderRequest">
<xsd:sequence>
<xsd:element name="BUSTRANS">
   <xsd:complexType>
    <xsd:sequence>
     <xsd:element name="CHILD_1" maxOccurs="unbounded">
      <xsd:complexType>
       <xsd:sequence>
        <xsd:element name="SUB_CHILD_1" maxOccurs="unbounded">
         <xsd:complexType>
          <xsd:sequence>
           <xsd:element name="SUB_CHILD_1_NAME" type="xsd:string">
           </xsd:element>
          </xsd:sequence>
         </xsd:complexType>
        </xsd:element>
       </xsd:sequence>
      </xsd:complexType>
     </xsd:element>
     <xsd:element name="CHILD_2" maxOccurs="unbounded">
      <xsd:complexType>
       <xsd:sequence>
        <xsd:element name="SUB_CHILD_2" maxOccurs="unbounded">
         <xsd:complexType>
          <xsd:sequence>
           <xsd:element name="SUB_CHILD_2_NAME" type="xsd:string">
           </xsd:element>
          </xsd:sequence>
         </xsd:complexType>
        </xsd:element>
       </xsd:sequence>
      </xsd:complexType>
     </xsd:element>
    </xsd:sequence>
   </xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Regards
Dominic

Mario,
<i>multimapping (split IDOC into several IDocs) is possible with IDocs. We did it!</i>
Did you use IDOC packaging for this?
AFAIK,when you use multimapping that involves different adapters including one J2EE adapter and a IDOC adapter in the inbound side, multi mapping does not work.
Regards,
Bhavesh

Problem in message mapping index.

HI All,
I am doing idoc to file scenario.
I have a problem in message mapping.
Issue is,
pallet1
palletheader(here i used counter to increment the value)
palletline(here i used INDEX to increment the value)
        pallet linenumber1(it should be 1)
        pallet linenumber2(it should be 2)
so on       )
so on
pallet2
palletheader
palletline
        pallet linenumber1(here again it should be 1)
        pallet linenumber2(here again it should be 2)
so on              )
so on
In INDEX we have option called reset index in that we have two radio buttons
one is "reset index to intial value with each new context"
and next one is "donot reset index to intiak value"
if i use the first radio button which is working fine in only one pallet and more pallet lines but not more than one pallet.
If i use the second radio buttton which is working fine in more than one pallet but not satisfying the more pallet lines in one pallet.
Can you please help me on the issue

my requirement is like this.
IF DELVRY05/IDOC/E1EDL20/E1EDL24/POSNR equals to /DELVRY05/IDOC/E1EDL20/E1EDL37/E1EDL44/EXIDV
then map to 'pallet line' .
I tried to keep posnr context as E1EDL20 and also IDOC level.
And at the same way to EXIDV too.
pallet(1 to unbounded)
   pallet header(1 to 1)
   pallet lines(1 to 1)
        in sub level pallet line(1 to unbounded) (here i applied the index logic)
The out put should be pallet line 1,2,3,----- so on
In the second pallet the pallet lines should be again 1,2,3,4-------so on .
But when i try to apply thsi logic,
I am getting only one pallet line instead of two.
second is not comming .
please help on this i am facing this problem for the long time back.
if i solve then i can complete my scenario.

URGENT:Problem in a mapping with 8 tables in JOIN and using the DEDUP op.

I have an urgent problem with a mapping: I must load data from 8 source tables (joined togheter) in a target table.
Some data from 1 of the 8 tables have to be deduplicated, so I created a sort of staging table where I inserted the "cleaned" data, I mean, the deduplicated ones.
I made it to make all the process faster.
Then, I joined the 8 tabled, writing the join conditions in the operator properties, and connected the outputs into the fields of the target table.
But..it does not work because this kind of mapping create a cartesian product.
Then, I tried again with another mapping builted up in this way: after the joiner operator, I used the Match-Merge Operator and I load all data into a staging table exactly alike the target one, except for the PK (because it is a sequence). Then, I load the data from this staging table into the target one, and, of course, I connect to the target table also the sequence (the primary key). The first loading works fine (and load all the data as I expected).
For the next loadings,I scheduled a pre-mapping process that truncate the staging table and re-load the new data.
But..it does not work. I mean, It doesn't update the data previously loaded (or inser the new ones), but only insert the data, not considering the PK.
So, my questions are as follow:
1) Why loading the data directly from the joiner operator into the fact table doesn't work? Why does it generate a cartesian product??
2) The "escamotage" to use the Match-Merge operator is correct? I have to admit that I didn't understand very well the behaviour of this operator...
3) And, most of all, HOW CAN I LOAD MY DATA? I cannot find a way out....

First of all, thanks for the answer!
Yes, I inserted the proper join condition and in fact I saw that when WB generates the script it considers my join but, instead of using the fields in a single select statement, it builts up many sub-selects. Furthermore, it seems as it doesn't evaluate properly the fields coming from the source tables where I inserted the deduplicated data...I mean, the problems seems not to be the join condition, but the data not correctly deduplicated..

IPhone 3GS - "LOCATION PINNING" PROBLEM ON THE MAP

Hi everyone. I'm currently using an iPhone 3GS running on IOS4 and unfortunately facing "location pinning problem" on the map. Even though, "location services" feature is on and also "active" for photos, I quite often need to reboot my device right after I took a picture(s) in order to see the "location pin(s)" on the map.
But sometimes I don't need to do so, because it somehow captures the place the picture's taken and puts a pin on the map right away.
Do you have any ideas about where that problem might be stemming from? Appreciate your help on this issue. Thx a lot in advance...

so did you happen to resolve that "pinpointing" issue?

Why I can't open google maps on Safari? Everything have been working normally with my computer. But this problem with google maps I can't fix

Why I can't open google maps on Safari? Everything have been working normally with my computer. But this problem with google maps I can't fix

Do you have an example? I develop Google maps for Web pages and haven't had problem with Safari and its extensions, only FF which I took out all the addons and plug-ins, but it wouldn't surprise if the Google map code doesn't display the map or information for the map or doesn't work with newer versions of Safari.

Help me please : Serious problems with collection-mapping, list-mapping and map-mappi

Hi everybody;
I have serious problems with list-mapping, collection-mapping and map-mapping.
Acording to specifications and requirements in a system I am working on it is needed to
get a "list" of values or an indivudual value.I am working with ORACLE 9i Database,
ORACLE 9i AS and ORACLE 9i JDEVELOPER.
I tried to map a master-detail relationship in an entity-bean, using list-mapping.
And this was very useful in order to get a "list" of details, ...but, when I wanted
to get a single value I have some problems with persistence, something about "saving a state"
despite I just want to get the value of a single detail.
I decided to change it to map-mapping and the problem related with a single detail
worked successfully, but I can get access to the whole bunch of details.
May anyone of you help me with that?
I am very confused I do not know what to do.
Have any of you a solution for that problem?
Thank you very much.

Have you tried a restore in iTunes?

Problems with Parameter Mapping

Hi All,
I have problems with parameter-mapping. For me its a black box, sometimes it works sometimes not.
Lots of times my mappings doesnt work, and I dont know the reason.
For example: I want to map my Execution-CO to the Display-CO. For that I map the in the affected Action.
But it doesnt work, although I do have the same Context Structures, because its the same CO. The technical Name is also the same.
What could it be?
Thanks for answering me
Bye Steve

Hi Andre,
sorry for my late answer, but I'm writing my diploma thesis and wasnt at work since wednesday and so I dont have a access to our GP-System.
Hope I understood you right.
The Use Case of parameter mapping is that Users of further steps has the possibility to see the Input of previous steps.
When I dont map the parameter inside one action, it isnt possible. I tried it out with the SAP example "Time-off-process". I took the CO "Create Request" and add it in one Action (as Display & Execution). When I understand you right mapping inside an action is not necessary, to see the Inputs from further Actions --> But this way I cannot see the Inputs.
The mapping of my application works before I changed it.
I know never touch a running system, but It was necessary, we need a new Input and Output Parameter.
Cause I have 20 parameter the mapping was very time-consuming, to map every single parameter. I read a method to reduce the time: Adding a structure requires only mapping of the two structures. But now the Mapping doesnt work.
Hope you can help me
Bye Steve

I have problems with google maps at IPhoto. It recognizes the place, but gives not the map.

I have problems with google maps at IPhoto. It recognizes the place, but gives not the map. It gets grey. You do not even see the world in black and white. What is the problem and what can I do?

in the iPhoto preferences is look up places set to automatically?
LN

Litlle problem with nokia maps for 5800 xm

hi evryone,
i have a problem with nokia maps for my 5800 xpressmusi which is i cant find my acces point when itry to GO ONLINE
please help thank you

Hi,
When you switch on your device for the first time, the access points may be configured automatically based on the service provider information in your SIM card. Otherwise contact your operator or service provider to receive the access point settings if you cannot find it..

Problem in different mapping according to XPATH in Inteface determination

Similar Messages

Maybe you are looking for