Problem in Direct Deposit Delete Screen

Hi ,
We are using ECC 6.0 Ehp 3 version of the ESS.
We are using the standard Direct Deposit iView to facilidate the end users to enter their banking information.
When we want delete the Other Bank account Information, in the review screen Account Type and Payment Method values are not showing. only field label is getting displayed and the values are not getting displayed.
When i go back to the Edit Screen and don't do any changes and Click on Previous Step and again clicking on Delete Shows the Account Type and Payment Method field values.
Is it required that these 2 fields should be part of the overview screen.? As of now these 2 fields are not displayed in the overview screen. I suspect some issue with the Personalization.
Request you to check in your environment and provide the valuable feedback.
Also which Webdynpro Component/View is responsible for the Direct Deposit Delete Screen?.
Thanks and Regards,
Sekar

Hello,
You can have a personalization at a glance on
https://wiki.sdn.sap.com/wiki/display/ERPHCM/HowtopersonalizescreensintheXSS
Also, to check the iview you are seeing you can go on the right upper corner, click on the small button and click on Details!
Thank you.
BR,
Bentow.

Similar Messages

HT1414 Could someone plizzzz tell me...I have an iphone4 32G, the problem is a complete black screen I'm unable to reboot it doesn't get picked up by itunes Pc, direct wall socket charging nothing it is got me.. i have tried everything to no avail.

I have an iphone4 32G, the problem is a complete black screen, I'm unable to reboot it doesn't get picked up by itunes Pc, direct wall socket charging nothing happens so it is got me beat?.. i have tried everything but no hope, Has anyone else had this problem? is there a solution, besides having to pay $199 for hardware replacemente... thank you to anyone with info...

bellaluna59 wrote:
So let me get this straight if I pay them [Apple Store] $149
they will replace my device? Is that correct?
Assuming it is in one piece and otherwise meets the conditions for an Out of Warranty replacement, yes.
Conditions are:
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.

Problem in enabling the selection screen

Hi ,
I have problem in enabling the selection screen.
i have radio button and based on the radio button i need to make the date field as mandatory.
When i tried this with at selection screen on radio button group XXX, itu2019s not triggering.
Could you please help me by resolving the above problem?
Vijay

Hi,
see the sap documentation
... RADIOBUTTON GROUP group [USER-COMMAND fcode]
Effect:
This addition specifies that the input field is displayed as a radio button in the first position on the selection screen, and the output field is displayed next to it on the right. The radio button is selected if the value of para is "X" or "x". Otherwise, it is not selected.
group is used to define the radio button group for the parameter. The name group is entered directly as a character string with a maximum of 4 characters. Within a selection screen, there must be a minimum of two parameters in the same radio button group. There cannot be more than one radio button group with the same name in one program, even if they are defined in different selection screens.
The parameter must be specified with the type c and length 1. Explicit length specification using len is not permitted. If the addition TYPE is used, it can only be followed by the generic type c or a non-generic data type of type
In a radio button group, only one parameter can be defined with the addition DEFAULT, and the specified value must be "X". By default, the first parameter in a radio button group is set to the value "X", and the rest are set to " ".
The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. To evaluate the function code, an interface work area of the structure SSCRFIELDS from the ABAP Dictionary must be declared using the statement TABLES. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields. If a function code used in the GUI status of the selection screen is specified for fcode, the selection screen processing is affected accordingly.
Note:
It is recommended to define the radio buttons of a radio button group directly underneath each other. If the selection screen also contains other elements, it is recommended to define each radio button group within a block surrounded by a frame.
Regards,
Venkatesh

ACH direct deposit

Hi,
I am trying to implement ACH direct deposit of expense claims. I am not able to create the payment stub(advice) and the file to be sent to bank. The following is the proposal log from F110.
Job started
Step 001 started (program SAPF110S, variant &0000000000069, user ID SANNEPU)
Log for proposal run for payment on 03/26/2007, identification S3261
End of log
Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000000046, user ID SANNEPU)
Step 003 started (program RFFOUS_T, variant &0000000000036, user ID SANNEPU)
Program RFFOUS_T: No records selected
Job finished
I am not sure what the problem is? Can anyone help?
Thanks,
Sobhan.

RFFOEDI1 is typically used when payments to vendors are to be sent by an EDI 820 file to the bank. This program generates the PEXR2002 idoc. The idocs are sent to the EDI translator where these are mapped to an EDI 820 file format and sent to the bank.
Scenario ACH-CCD payments method (D)
If you do not want to send EDI 820 payments, you would typically not generate the idoc - in which case - you dont have to use RFFOEDI1. This probably means that (a) you are using the RFFOUS_T program for generating the payment medium or (b) you are using the payment medium workbench to generate the ACH file (NACHA format) for your house bank.
You do have to send an ACH file to the bank for paying your vendors - which means - you are probably using one of the above methods to generate the file.
ACH Direct Deposit
I am assuming that you are probably referring to ACH-PPD type payments here. You would still have to send the payment medium using one of the methods mentioned above.
In all ACH scenarios, your payment document number, is your reference number that was used to clear the open item.
Hope this helps.

Re: Saudi Direct Deposit issue

Hi,
I am facing a similar problem like others did in a previous forum thread:
Saudi Direct Deposit issue
After i run the PrePayments process i could see in SOE the correct values for Payment Method with all bank details and payment amount.
But when i run the Saudi Payment Output File i couldnt see the output file from the button View Output it gives me a message "Concurrent request did not create an output file".
Even we couldnt find any file on the server with extension as .mf
I checked in the Assignment Process Results for each assignment but could not find any record for Magnetic Tape.
I shall be thankful to you if you could let me know how you solved this issue.
Thanks,
Khan

Hi Vignesh,
I am sure I have given the same start date for EFT and prepayments processess.
I have three records for each assignment in the tables PAY_PAYROLL_ACTIONS and PAY_ASSIGNMENT_ACTIONS.
Action Type
=========
R = Payroll Run
P = PrePayments
X = Magnetic report
Rather it should be four records one additional for Magnetic Tape which is missing.
The log says the program has completed successfully without any errors. Below I have copied some parts of the log file.
SA_EFT module: Saudi Payment Output File
Ended processing at : 05-NOV-2012 16:23:42
Total Assignment count : 0
Total Action count : 0
PL/SQL Output
PL/SQL Output
Finished executing request completion options.
Concurrent request completed successfully
*********************************************************/

Problem with Direct OC, i assume

So recently during playing some games, such as Heroes of Newerth and Wow for the most part ive been experiencing some random spiking(especially around parts where some animations happen fast) in the games and when i tab out and check processes on *system manager?*(not sure if its that in english) Direct OC takes some serious amount of memory, allmost allways its around 50% of what my current game is taking. Im not really familiar with Direct OC's business so i usually just reboot it and keep doing what im doing, usually it helps the experience sometimes it doesnt. Also i have a second problem with Direct OC, well maybe not a problem but i assume its related to it. When i have Direct OC on and computer idles ~30mins or so with screen power saving or screen saver on the recovery from screen saving takes a little while to react with desktop or so, mouse keeps moving and all but cant really do anything. So when i thought it was an issue with Direct OC, i tried without it ending up with recovery not really happening...ever! Mouse keeps moving like usual but when i try to interact with anything nothing happens and at around 10-20clicks with mouse the whole OS just freezes and thats about it for it until i force boot comp. So im guessing with this problem Direct OC is actually boosting my cpu to overcome the recovery process from the saving, but im not really too familiar with all this so im trying my luck here now.
My Build:
Intel Core i5 759 2.67GHz
MSI P55M-GD45 (MS-7588)
XFX Radeon 5850HD 1024MB
4GB of 1600MHz DDR3
Win7 Ultimate

Hello,
Please check the following note which has details for handling customer specific fields in Direct input program.
Note 44410 - Integrating cust.-specific fields in matl master
Cheers!
Sam Kandas

IExpenses "paid by Check" vs "paid by direct deposit"

Hi All,
We have OIE: CC Payment Notify = Yes. After every expense payment, user gets either of following two notifications.
Expense XX (Amount XX) has been paid by check
or
Expense XX (Amount XX) has been paid by direct deposit
Now my problem is when supplier and debit account is set as WIRE we get payment by CHECK notification.
However if supplier and debit account is set as ELECTRONIC we get payment by DIRECT DEPOSIT.
My user is expecting "direct debit" notification in both WIRE & ELECTRONIC cases. Does anyone knows whats going on here ?

Ahh, the joys of working with vendor software. I think you are going to want to talk to Oracle support and likely create an enhancement request. I understand that as far as the user is concerned, a wire payment is an "electronic" payment. It certainly was not paid with a check. Unfortunately, Oracle Payables does not think that way. In Oracle Payables design (perhaps from many years ago), the typical way to record a payment via wire transfer is via a manual payment. Just like in the old days you might have manually typed a check, and then wanted to record that payment in the system. So Oracle payables by design will see wire payments as being treated as being a check, rather than an electronic payment. Whereas direct deposit is considered an electronic payment. I personally agree with your user - a wire payment should be considered an electronic payment. As users, we need to be telling Oracle (via enhancement requests or working with Oracle SIGs) that they need to change their design - does not make sense to the users. So I suggest submitting a service request to Oracle support to ask if there is a way to change the notification type for wire payments. If they say no, then submit an enhancement request. Not what you probably wanted to hear for sure, right?
John Dickey

Problem with direction in a page(??????)

Hi every body,
I have a problem with direction in some page when i change the language to Arabic(right to left language).
in some page like welcome page its completely true ,but in some page that i buile with my self (and add some portlet to it like :advanced search portlet)its directon does not appear properly,the label is appear in left, and text box appear in right(its not true).
what can i do??????????????????
please answer me :(

This is not the right forum for your question. Try to post it in the Oracle Application Server Portal forum, or contact Oracle Support.
Peter

How do I find out what program / file is using 100 GB of space on my Hard drive? Once I find the problem how do I delete the specific files to increase GB of space?

How do I find out what program / file is using 100 GB of space on my Hard drive? Once I find the problem how do I delete the specific files to increase GB of space?

Use OmniDiskSweeper
Once you find file, it can be deleted from within OmniDiskSweeper
Allan

Problem with Direct printing of PDF with Barcodes in R12

Hi All,
We are facing a problem in direct printing in EBS R12 with xml pdf reports which contains some barcode fonts. We are using fonts from IDAutomation for barcodes. Printing from request output is working fine. But when it is printed directly everything get printed other than the barcodes. Did anybody face this problem before and fixed it?
Regards,
Benny

Benny,
Output from XML Publisher comes out correctly. The barcodes are stripped off during pdftops conversion. Any idea?
How did you verify the above?
PASTA 3.0 Release Information (Doc ID 239196.1)
BIP PDF Output Does Not Print MICRD Barcode Font - View Output Ok (Doc ID 747195.1)
Thanks,
Hussein

Does the RFFOEDI1 program has any implication on the ACH direct deposit?

Hi all,
Can any one please explain the use of RFFOEDI1 program. Is this
program used just to generate I-Doc?
Scenario: For Check payment method(C)
Once F110 run is successful, then we have to run RFFOUS_C program to
generate checks. Once this program is complete, checks will be
generated and the check info will be available in PAYR table.
Scenario: For ACH-CCD payment method (D)
Once F110 run is successful with payment method D, The payment details
will hit BSAK table.
Now, I don't want to generate the SAP standard I-Doc with RFFOEDI1, do
I still need to run RFFOEDI1 program???
For the check payment, RFFOUS_C program triggers the generation of
checks after which the check info will be available in PAYR table
Likewise, does the RFFOEDI1 program has any implication on the ACH
direct deposit?
To my understanding, If you do a payment using payment method, ACH
direct deposit in SAP, we don't generate any check numbers ???!!!
Do we get any reference number or anything when the direct deposit is
done??? This reference number could be used to trace the invoice
against which this ACH payment was done!
If it is the case, where do we get/ when do we generate the reference
number to trace the invoice????.....any inputs?
If we are not going to run RFFOEDI1 program, (if we are not interested
in generating IDoc) then are we DONE with the ACH direct deposit, once
we are done with payment run(F110)???
Where do we get the reference number which specifies the ACH payment?
Sorry, I have poured in lot of question at one place!
Any inputs/ solutions/ suggestions are greatly appreciated!
Thanks a lot!

RFFOEDI1 is typically used when payments to vendors are to be sent by an EDI 820 file to the bank. This program generates the PEXR2002 idoc. The idocs are sent to the EDI translator where these are mapped to an EDI 820 file format and sent to the bank.
Scenario ACH-CCD payments method (D)
If you do not want to send EDI 820 payments, you would typically not generate the idoc - in which case - you dont have to use RFFOEDI1. This probably means that (a) you are using the RFFOUS_T program for generating the payment medium or (b) you are using the payment medium workbench to generate the ACH file (NACHA format) for your house bank.
You do have to send an ACH file to the bank for paying your vendors - which means - you are probably using one of the above methods to generate the file.
ACH Direct Deposit
I am assuming that you are probably referring to ACH-PPD type payments here. You would still have to send the payment medium using one of the methods mentioned above.
In all ACH scenarios, your payment document number, is your reference number that was used to clear the open item.
Hope this helps.

Payment Posting - Replacing a direct deposit with a check

Dear Experts,
I need your advise on the following:
Running SAP ECC 6.0 and gross to net payroll. The net pay wage type is posted to different account based on payment method (Direct deposit or check).
In instances where the employee has provided a wrong bank account number, the ACH is rejected by bank and we have to perform the payroll replacement via OC workbench to pay the amount via check. After the OCWB process we call a process model to print check and second step of the process model is to call Payment posting program (H99_POST_PAYMENT).
The payment posting step posts the amount to account for the check (as the employee is now paid via check) but it does not reverse the original entry which was made when the employee was paid via ACH.
SAP responded back saying it doesnot/cannot reverse a portion of the payment posting document when these types of adjustments are made. I wanted to reach out to other users/experts to see what process they are following to reverse the entry.
Any help is greatly appriciated.
Thanks

Hi,
Generally process goes this way.
If amount posted is incorrect or may be due to incorrect account provided during direct deposit.
Run prenotification program after payroll to convert direct deposit to checks for 10 days until this time bank is sent with bank account file by client to validate accounts and if there are any changes then they are made in system.
Once confirmed after 10 days automatically checks will be again converted to direct deposits for employees for whom prenotification was run.
The steps will be :
Payroll run
HR Posting run
Prenotification run
Pre-DME run
Print check and DME run
Also, if your client does not want prenotifcation then you will need to set-up process model to first run for reversal of postings and then to run for replacement of payment through process model set-up.
Thanks,
Ameet

Why the photo app is not closing after i finish, when i take a picture accessing directly from home screen. the location is draining my battery if I'm not closing the app by double click home button. in iOS 6 was not like this

When im taking a picture directly from home screen after im finished the application remain open. This app is ussing the location and if im not closing like other applications by doble click the home button the batery will finished fast. On the other IOS 5 and 6 was not neccesary to unblock the phone and bouble click the home bottom.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Connecting iPod directly to computer screen for video

Hi everyone
I would like to connect my iPod directly to my computer screen at work for watching videos after hours. Is there anyway (cable/adapter) to connect the iPod directly to the screen (DVI or VGA)?
I can't connect the iPod directly to the computer nor do I have a TV...
Many thanks

Depends on your screen. Some have ability to take RCA inputs. If yours does then get an iPod dock that supports RCA transfer.

I have problems with office for mac screen resolution, specially with excel

I have problems with office for mac screen resolution, specially with excel ?

For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
We are talking about Office:Mac 2011, right?

Problem in Direct Deposit Delete Screen

Similar Messages

Maybe you are looking for