Problem in displaying dynamic table placed in master page

Hi all,
I have placed a dynamic table in my master page. When the page overflows the dynamic table is shown only in 1st page. I want this table to be shown in every page. Please help me solve this.
Regards,
Devaiah

hi,
Thank you all for your reply. But i cannot keep the table in body page as i want this table to be displayed in every page in the header. Actually i am displaying an address through this table.
I have moved the content area in master page to center and reduced its size and in the body page i have placed a table which will display the report. When this table overflows to next page all the contents in master page are shown except for the address table in master page. I am not sure whether i am doing it the right way as i am bit new to adobe forms.
Please let me know where am i going wrong. Also please suggest me some alternative method ( if any ) to display the address in every page if the above method is not feasible.
Regards,
Devaiah

Similar Messages

Creating a dynamic table that spans multiple pages

Hi guys,
I have a script that is able to add rows to a dynamic table.
The issue I am having now is I want this dynamic table to span multiple pages.
I'm not exactly sure how to do this. It looks like to me that the table stops once it reaches the height of the text frame enclosing it.
How do you create a table / text frame that expands to it's contents and not the size of the text frame enclosing it. Ideally I want this table to span multiple pages.

OK, I have 3 screenshot to see if that will help. My book is a transcription of some old county records around 1800. I have a section of my book that had a list of items in text separated by a right tab.
I highlighted that text and converted it to a table. In portrait mode I can scroll and see all the table.
When I switch to landscape mode the table is cut off and does not wrap to the next page.
The text after the table appears on the next page. The preview on the ipad is the same.
Thanks for any help on figuring this out. Also, I enjoy your podcasts.
MB

Problems with displaying dynamic Arabic text

We have a problem with a navigation system we are building
which has to be able to display dynamic Arabic text. We are pulling
in the Arabic text using XML. The problem we are having is that the
character are not displaying joined up where they should be (for
instance in the middle of words). Arabic characters have different
shaping according to the position they take up within a word. What
we are producing is apparently unreadable. Has anyone come accross
this problem before? Is it solveable?

Hi:
Is there any possible chance that Adobe would do something to asist us Fl8 users with international character support.
Everyone has some work-around, except Abode, and they are all usually related to XML.
My setup is PHP (CMS supporting many languages) -> MySQL -> PHP -> Flash8 (Dynamic Text Fields) and the olpart that does not work is when I inject an extended character into the string - Flash stops displaying anything from that character on.
If Adobe has or did have some component / solution or anything other than the usual System.useCodePage = true (which never seems to actually work), please let me know.
Best Regards,

Display dynamic table & content

I have this one webpage which I display a Dynamic record from
the DB. The webpage contains a table with the dynamic record inside
the table.
On the webpage, if the record firld from the DB is empty, the
table is not displayed on the page. If there is, the table is
displayed with the record inside.
With the following code, it works fine for the empty record
but for the other ones, it will display the table but no records
inside...any idea?

You need to pass the following to the quantity fields..
ls_fieldcat-do_sum = 'X'.
When you build the sort table, do this...
FORM sort_build USING lt_sort TYPE slis_t_sortinfo_alv.
DATA: ls_sort TYPE slis_sortinfo_alv.
CLEAR ls_sort.
ls_sort-spos = 1.
ls_sort-tabname = gt_tabname_item.
ls_sort-fieldname = 'DESCBIEN'.
ls_sort-subtot = 'X'.
ls_sort-up = 'X'.
ls_sort-group = 'UL'.
APPEND ls_sort TO lt_sort.
ENDFORM. " sort_build
Has you any way of knowing which fields are quantity?
Greetings,
Blag.

Problem in displaying dynamic values in dropdown list for each row

I want to display dynamic values in a drop down list for each row, and these values depends on the column value in each row(ptaid), based on each ptaid i need to fetch values for drop down list. so how can i achieve this..
Thanks
Babu

Babu,
This has been discussed in many old threads, try to find them. Also u can refer to article "Dependent Dynamic message choicelists ", at my blog
http://www.mukx.blogspot.com/
--Mukul

Dynamic form with multiple master pages

I have a 7 pg form that has different data in the footer area. I placed the footer info on it's own separate master page and set the page to the corresponding page numbers. I moved the content area above the footer section so my content can flow to the next page properly. But my problem is since I set the Pagination area to "Place: Top of Page "Page 2" and the rest accordingly, I'm getting an almost blank page with the data from the previous page and the next page pushes to a separate page of its own for every page. Not sure how to make the form flow continuous, this is my first time having to do a form this way. Typically I set the pages when I'm done to "Following Previous" instead of "Top of Next page" in the Pagination Place field for each section and everything works fine then. I've never had to deal with a different master page for each page in the form.
Any help or suggestion would be greatly appreciated.
Jim

If you have 7 pages with different footers, wouldn't it be easier to have the footer also part of the body page instead of Master page.
Unless you are adding dynamic content at runtime, you can keep the footer in the body page itself. That way you can avoid multiple master pages.
If you still have issues, you can share the form, so I can have a look at it.
Thanks
Srini

Dynamic Form - Barcode on master page, only contents on specific page to be populated on barcode

We have a dynamic form that grows as required. We have one barcode on the master page. As form grows to next page only the contents on that page (ie page 2) must be on the barcode on page 2 and page 1 content only on page 1. But if the form goes back to normal then the contents must not be on the barcode anymore.
Could anyone assist on this problem please?

Hi Brad ,
For your issue, you can view the Upgrade Status page in Site Settings to verify that upgrade has succeeded for a site collection.
To view upgrade status in Site Settings
1.Verify that the user account that performs this procedure is a site collection administrator.
2.On the Site Settings page for the site collection, in the Site Collection Administration section, click Site collection upgrade.
3.On the Site Collection Upgrade page, click Review Site Collection Upgrade Status.
4.The Upgrade Status page for the site collection is displayed.
For more information, see
Manage site collection upgrades to SharePoint 2013
Also you can go to _layouts/15/reghost.aspx (Site Settings -> Site Actions -> Reset to site definition) and reset the master page gallery to site definition version.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Dynamic table grows to 3 pages, preceding section of document moves, appears in middle of table!

I have a form with several sections, say (a) 'header', (b) 'instructions', (c) dynamic table.    This works very well in general - as long as the total form fits on 2 pages.
However, if the number of rows in the dynamic table gets too large, and flows to page 3 (or more), then the 'instructions' section moves from being in it's normal order - and shows up inside the table at the top of page 3 (last page)!     i.e., this section shows breaks the flow of the table, inserts a complete section, and then continues with the table!
Any ideas?    I've tried manually hiding/showing things and other tricks to try to get it to work as it does with a smaller table.

After mucho effort to reduce the problem, it turned out that I had the misbehaving section "Keep with -previous-" checked.    Not sure what this does really, and it certainly wasn't working correctly - but heck, removing it solved my problem.
I did reproduce the problem to this:
subform - marked 'Keep with previous"
repeating table
That's it.    Once the size of the repeating table goes to page 3, the previous subform jumps to the top of page 3.    Go figure.
(Somewhat humorously, in the linked to file - even the preceding element to the offending subform is also dragged to the top of page 3.)
Clearly shows bug in a minimal form - http://www.radioshowlinks.com/f/cwb/TooSimple-v13.pdf
Thanks again for all your help!!!
p

How do I populate my date fields placed on Master Page for multiple pages?

I have a dynamic form with flowing fields. I inserted date fields using the Master Pages tab within Adobe LiveCycle Designer ES2, Windows 7 OS. I have only 1 Master Page. Everything on the form is working properly, except when I have multiple pages, the date fields are blank on all but the first page. One of the date fields has javascript in the exit event to calculate the second date field. I can manually edit the subsequent page(s) date fields, but I don't want the end user to have to do that. I want the date fields on the new pages to equal the date fields on the first pages. Below is my output with notes to provide a visualization of what I'm looking for.
Many thanks in advance for anyone who can help me with this issue!
Caroline

Hey Mandy,
Yes, both date fields are on the Master Page. The first one is set to "User entered - Required" and the second to "Calculated - User Can Override"
And that's right, I used your script to calculate the second date field. The only thing I changed was the field name, and used 6 days instead since I wanted the calendar days to only run a full week, like start on a Monday and end on Sunday.
Thx,
C

How to display user profile information in master page header

I am trying to display user profile info like following in custom master page.
I have just added a html code for displaying this info.
Now, please tell me how could i achieve this
I am doing this in sharepoint 2013 on-premise.

see below is example for javascript and userprofile information
<script type="text/javascript">//<![CDATA[
$(document).ready(function
var currentUser;
// Ensure that the SP.js is loaded
if (SP.ClientContext
!= null)
SP.SOD.executeOrDelayUntilScriptLoaded(getCurrentUser,
'SP.js');
else
SP.SOD.executeFunc('sp.js',
null, getCurrentUser);
function getCurrentUser()
var context = new SP.ClientContext.get_current();
var web = context.get_web();
currentUser = web.get_currentUser();
context.load(currentUser);
context.executeQueryAsync(onSuccessMethod, onRequestFail);
function onSuccessMethod(sender, args)
var account = currentUser.get_title();
var currentUserAccount = account.substring(account.indexOf("|")
+ 1);
var currentUserAccountUnderScore = currentUserAccount.toLowerCase().replace(/\s/g,
//alert(currentUserAccount);
$("#username").text(currentUserAccount);
$("#ProfileImage").attr("src",
"https://mydomain-my.sharepoint.com/User%20Photos/Profile%20Pictures/"
+ currentUserAccountUnderScore +
"_mydomain_onmicrosoft_com_MThumb.jpg");
$("#ProfileImage").attr("alt", currentUserAccount
+ " User Profile Image");
$("#ProfileImage").attr("class",
"ss-profile-image");
//This function runs if the executeQueryAsync call fails.
function onRequestFail(sender, args)
alert('request failed' + args.get_message()
+ '\n' + args.get_stackTrace());
$("#ProfileImage").attr("src",
"https://mydomain.sharepoint.com/SiteAssets/userImageDefault.jpg");
//]]>
</script>
-Nilesh

Capturing data from a dynamic table that span multiple pages

I created a PDF form that contained a dynamic table that can span across multiple pages. Additional rows in the table can be created by the person filling the form as and when needed.
The PDF form is distributed to the receipient using Adobe LiveCycle Designer.
However, when the form is "Submitted" back to the originator of the form, only data in the first row of the table is captured in the Response file. All the other rows are left out.
I would be grateful if anyone can advise me as to how do I or what shall I do to get all the data in all the rows in the table into the Response File?
Thank you.

Hi
Attached are the saved completed PDF-Form and the response file after the completed form has been submitted. I have copied this message to your gMail account.
Only data in the first row of the table is captured in the Response file.
If it is working correctly on your side, please let me know what could have gone wrong on my side.
Thank you.
Best regards,
Kim-Siang Ng
http://www.tipstoenrichyourlife.com/parenting
With the wish to help all beings, may all my thoughts,words,and actions be void of attachment and ego.
May they arise from compassion and wisdom.
May they be imbued with patience and joy.
The information contained in this transmission may contain privileged and confidential information and is intended only for the use of the person(s) named above. If you are not the intended recipient, any review, dissemination, distribution or duplication of this communication is strictly prohibited. If you received this email in error, please contact the sender immediately by reply e-mail and destroy all copies of the original message. This email is not intended as an offer or solicitation for the purchase or sale of any financial instruments.
This email is forwarded automatically to a selected list of my buddies for enjoyment. Contents come from various sources and none of the materials I claim as my property. If any belongs to you, please consider it an honor that the content was worthy enough to be shared. No copyright infringement intended!. If any material is not appealing to you DELETE immediately.
When forwarding this email, please have the courtesy to respect the privacy and confidentiality of the sender by deleting all previous email trails and addresses before you proceed to forward this email to others.

How to export only the data displayed in table of a jsp page to Excel

Hi All,
I want to export only the data that is displayed in the table of a jsp page to excel. But with my current code everything is getting exported to excel.
<input type="checkbox" name="download" onclick = "form.submit()"/> Export to Excel
response.setContentType("application/vnd.ms-excel");
response.setHeader("Content-disposition", "inline; filename=fileName.xls");
the table is displayed in the jsp using the following code:
<table cellspacing="2" cellpadding="3" border="1"
width="100%"> <tr> <%for (int i = 2; i <= cols; i++) {%>
<td>
<%
out.println( rsmd.getColumnName(i) + " ");
} %>
<% while (rsettaba.next ())
out.println("<tr>");
for (int j= 2; j <= cols ; j++) {
//out.println("<td>"+rsetallcl.getString(j)+"</td>");
String varnl = rsettaba.getString(j);
if ( varnl == null )
out.println("<td> Empty </td>");
else
out.println("<td>"+rsettaba.getString(j)+"</td>");
out.println("</tr>");
%>
</td>
</tr>
</table>
please can anyone help how to just extract only the data in the table of a jsp page to excel.
Edited by: Ramky48 on Dec 9, 2009 9:51 PM

Ramky48,
Why did you open a new thread when you had gotten quite a few responses and suggestions on the [url http://forums.oracle.com/forums/thread.jspa?threadID=998411]thread where you asked the same question - seems the best thing to do would be to continue on the same thread?
However, your question has nothing to do with JDeveloper/ADF. If you'd like to do it the ADF way, it's trivially easy - you can use the [url http://download.oracle.com/docs/cd/E15523_01/apirefs.1111/e12419/tagdoc/af_exportCollectionActionListener.html]af:exportCollectionActionListener component, which does what you are asking for. If you want to use a straight JSP way, there were several good suggestions in the other thread you opened, or Googling "jsp export to excel" will get you about 4.6 million hits; the first 10 or so look pretty promising.
John

Problems when I copy a text from master page field to body page field

Hello
I am developing a electronic form and I have experimented a strange bebehavior.
When I try to copy a rawvalue of listbox field from master page to textbox field in body page, this works randomly.
I have this code in the validation of the master page field
--------------------begin code---------------------
if (this.rawValue != null && this.rawValue != "")
if (xfa.form.myform.mysubform.mytextfield.rawValue != this.rawvalue)
xfa.form.myform.mysubform.mytextfield.rawValue = this.rawValue;
--------------------end code---------------------
Somebody know what is wrong?
I am very confused.
Thanks a lot for your help.
Hosting Association
The low cost quality hosting
http://www.hostingassociation.biz

Extra code is one of the pitfalls of using WYSIWYG cutting and pasting,
and using styling in general.
So while it may be interesting to try to reduce the amount of code, there
probably won't be any direct approach without extra steps to get you what
you want with bare bones code that appears as you want it to or at least acceptable.
I guess you might have to take a screen image, clip the relevant portion, since
you can only attach an image file here not a text file.
Posting a screen shot
* http://kb.mozillazine.org/Posting_a_screenshot_on_the_forum#Windows

Displaying dynamic table in OOPS ALV

Hi,
I am creating a dynamic internal table which consists of some fields which are being filled dynamically and some fields which are being filled from a static internal table. I am facing two issues in the development:-
1. The static fields are being populated into the dynamic work area successfully but I am not able to modify the dynamic in ternal table using the work area.
PFB my code:
READ TABLE I_LEVEL1 WITH KEY KSCHL = WA_T681-KSCHL
                                       KOTABNR = WA_T681-KOTABNR.
          IF SY-SUBRC EQ 0.
            <WA_DYN_TABLE1>-UDATE    = I_LEVEL1-UDATE.
            <WA_DYN_TABLE1>-UTIME    = I_LEVEL1-UTIME.
            MOVE-CORRESPONDING <WA_DYN_TABLE1> TO <WA_DYN_TABLE>.
            MODIFY <I_DYN_TABLE> FROM <WA_DYN_TABLE> TRANSPORTING UDATE
                                                                  UTIME.
The dynamic filds of <I_DYN_TABLE> are being populated successfully but the MODIFY statement gives an error.
The specified type has no structure and therefore no component called UDATE.
2. The other problem I am facing is that while displaying output for the same ALV, no column names are being displayed.
I am using OOPS ALV.
PFB my code for the same:
CL_SALV_TABLE=>FACTORY( IMPORTING R_SALV_TABLE = O_TABLE
                              CHANGING T_TABLE      = <I_DYN_TABLE> ).
      O_FUNCTIONS = O_TABLE->GET_FUNCTIONS( ).
      O_FUNCTIONS->SET_ALL( ABAP_TRUE ).
      O_COLUMNS = O_TABLE->GET_COLUMNS( ).
      O_COLUMNS->SET_OPTIMIZE( 'X' ).
Please help me regarding the issues.
Thanks.
Edited by: Suhas Saha on Jan 18, 2012 3:11 PM

Hi Suhas,
Thank you for the reply. The modify problem has been solved.
Regarding the heading issue:
Here is the code for populating the table:-
LOOP AT I_TY_FIELD INTO WA_TY_FIELD.
          WA_DYN_IT-FIELDNAME = WA_TY_FIELD-FIELDNAME.
          WA_DYN_IT-TABNAME   = WA_TY_FIELD-TABNAME.
          WA_DYN_IT-DATATYPE = WA_TY_FIELD-DATATYPE.
          WA_DYN_IT-INTTYPE   = WA_TY_FIELD-INTTYPE.
          WA_DYN_IT-INTLEN    = WA_TY_FIELD-INTLEN.
          WA_DYN_IT-SCRTEXT_M   = WA_TY_FIELD-FIELDDESC.
          APPEND WA_DYN_IT TO I_DYN_IT.
          CLEAR: WA_DYN_IT.
        ENDLOOP.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
          EXPORTING
            IT_FIELDCATALOG = I_DYN_IT
          IMPORTING
            EP_TABLE        = I_DY_TABLE.
        ASSIGN I_DY_TABLE->* TO <I_DYN_TABLE>.
        ASSIGN <I_DYN_TABLE> TO <FS_2>.
Create dynamic work area and assign to FS
        CREATE DATA I_DY_LINE LIKE LINE OF <I_DYN_TABLE>.
        ASSIGN I_DY_LINE->* TO <WA_DYN_TABLE>.
I_TY_FIELD contains all static and dynamic fields.
Is there any field of I_DYN_IT i need to fill I have missed which fills up the column header data?

Urgent problems with displaying in table format

Hi everyone!
Desparately need help in placing result of search from MySQL
database into individual cells of the table. If anyone can give me
a sample code/file, it would be most helpful! I have results from a
display all of the table, now I need to code so that particular
results from fields are displayed in assigned columns...
Thank you in advance!
Short_T

It's hard without seeing your specific application, but what
you need to do
is the following -
1. Add a recordset to the page
2. Place fields from this recordset into the cells of a table
as desired
3. Wrap the row with these cells in a looper/repeat region,
so that the
recordset is incremented from beginning to end as the records
are being
placed in the table and the page is built step by step
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Short_T" <[email protected]> wrote in
message
news:e8aafs$6gv$[email protected]..
> Hi everyone!
>
> Desparately need help in placing result of search from
MySQL database into
> individual cells of the table. If anyone can give me a
sample code/file,
> it
> would be most helpful! I have results from a display all
of the table, now
> I
> need to code so that particular results from fields are
displayed in
> assigned
> columns...
>
> Thank you in advance!
>
> Short_T
>

Problem in displaying dynamic table placed in master page

Similar Messages

Maybe you are looking for