Problem in displaying map.

Hi
I am not able to display the map in my device.
I have downloaded the google map in my device and i am getting the error , if i start the application.
The error is : "This application requires a data connection and some blackberry require reconfiguration to work properly.Please visit www.google.com/gmm on your computer for more info".
The net is working on my device.

Vaisali, As Simon said this is not a development issue.
Also from the error message, it is clear that the application is not having proper transport.
Do check once with BIS enabled SIM if it does not work with BIS then check with your network provider.
Rishikesh Singh

Similar Messages

  • I have a problem when using Google Maps, at some point my computer blanks the window and says there's a problem with display drivers, and it has recovered,but it doesn't. Problem doesn't happen with Int Explorrer, so I do not believe it is the computer

    When using google maps through Firefox, after asking for a place which is not the general North America section which routinely comes up, the firefox screen goes white, with a narrow banner at the top. A message appears in the lower right corner which says something about display drivers having had a problem, but now have recovered. However the display doesn't recover and the banner message is that Firefox is not responding. When I go to restart Firefox if I go to the restore point, the page is still frozen out.
    I do not believe it is a problem with my computer because it doesn't happen if I use I.E. to go to google maps, then G-maps works normally.
    This phenomenon did not happen before the latest upgrade to either Google or Firefox. I have used Fiefox for a number of years and also Google Maps on previous computers and on this one, and not had this before.
    This is a relatively young computer (Asus EeSlate 121) less than a year old. I have used Firefox since I bought it and until recently had no problem with Google Maps.

    I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
    Now all is working.
    Thanks,
    B.

  • Problem with display driver

    Hello,
    Im using Photoshop CC and when it starts up it sometimes gives me this error message:
    'Problem with display driver and has temporary disabled enhancements which use graphics hardware.'
    What does this mean?
    Then it tells me to download the latstest software and gives me a link to an Adobe site that tells me nothing about a sollution.
    About my mac:
    MacBook Pro
    Intel Core i7
    2,2 GHz
    4 cores
    8 GB RAM
    AMD Radeon HD 6750M
    Thanks a bunch!

    Here you go:
    Adobe Photoshop Version: 14.2 (14.2 20131211.r.515 2013/12/11:23:00:00) x64
    Operating System: Mac OS 10.9.1
    System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 2200 MHz
    Built-in memory: 4096 MB
    Free memory: 2266 MB
    Memory available to Photoshop: 3136 MB
    Memory used by Photoshop: 80 %
    Image tile size: 1024K
    Image cache levels: 4
    Font Preview: Medium
    TextComposer: Latin
    The GPU Sniffer crashed on 10/01/2014 at 09:05:58
    Display: 1
    Main Display
    Display Bounds: top=0, left=0, bottom=900, right=1440
    OpenGL Drawing: Enabled.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    AIFCoreInitialized=1
    AIFOGLInitialized=1
    OGLContextCreated=1
    NumGPUs=1
    gpu[0].OGLVersion="2.1"
    gpu[0].MemoryMB=1024
    gpu[0].RectTextureSize=16384
    gpu[0].Renderer="AMD Radeon HD 6750M OpenGL Engine"
    gpu[0].RendererID=16915206
    gpu[0].Vendor="ATI Technologies Inc."
    gpu[0].VendorID=4098
    gpu[0].HasNPOTSupport=1
    gpu[0].CompileProgramGLSL=1
    gpu[0].TestFrameBuffer=1
    gpu[0].OCLPresent=1
    gpu[0].OCLVersion="1.2 (Aug 24 2013 21:03:27)"
    gpu[0].CUDASupported=0
    gpu[0].OCLBandwidth=1.89051e+10
    gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.20"
    gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[4096]
    gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
    gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
    gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[3072]
    gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[3072]
    gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[128]
    gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
    gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
    gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
    gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
    gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
    gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1
    gpu[0].extension[AIF::OGL::GL_ARB_SHADER_TEXTURE_LOD]=1
    License Type: Subscription
    Serial number:
    Application folder: /Applications/Adobe Photoshop CC/
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      Macintosh HD, 697.8G, 107.2G free
    Required Plug-ins folder: /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Required/Plug-Ins/
    Primary Plug-ins folder: /Applications/Adobe Photoshop CC/Plug-Ins/
    Installed components:
       adbeape.framework   adbeape   3.4.0.29366   0.1160850
       AdbeScriptUIFlex.framework   AdbeScriptUIFlex   6.3.2.31983   79.546835
       adobe_caps.framework   adobe_caps   7.0.0.21   1.248010
       AdobeACE.framework   AdobeACE   2.20.02.31977   79.548223
       AdobeAGM.framework   AdobeAGM   4.30.29.31977   79.548223
       AdobeAXE8SharedExpat.framework   AdobeAXE8SharedExpat   3.7.101.18636   66.26830
       AdobeAXEDOMCore.framework   AdobeAXEDOMCore   3.7.101.18636   66.26830
       AdobeBIB.framework   AdobeBIB   1.2.03.31977   79.548223
       AdobeBIBUtils.framework   AdobeBIBUtils   1.1.01   79.548223
       AdobeCoolType.framework   AdobeCoolType   5.15.00.31977   79.548223
       AdobeCrashReporter.framework   AdobeCrashReporter   7.0.1  
       AdobeExtendScript.framework   AdobeExtendScript   4.5.5.31983   79.546835
       AdobeJP2K.framework   AdobeJP2K   1.2.2.31977   79.248139
       AdobeLinguistic.framework      19061  
       AdobeMPS.framework   AdobeMPS   5.8.1.31977   79.535029
       AdobeOwl.framework   AdobeOwl   5.0.24   79.547804
       AdobePDFL.framework   AdobePDFL   11.0.0.31977   79.508720
       AdobePDFSettings.framework   AdobePDFSettings   1.4  
       AdobePIP.framework   AdobePIP   7.0.0.1786  
       AdobeScCore.framework   AdobeScCore   4.5.5.31983   79.546835
       AdobeUpdater.framework   AdobeUpdater   6.0.0.1452   "52.338651"
       AdobeXMP.framework   AdobeXMPCore   79.154911   79.154911
       AdobeXMPFiles.framework   AdobeXMPFiles   79.154911   79.154911
       AdobeXMPScript.framework   AdobeXMPScript   79.154911   79.154911
       ahclient.framework   ahclient   1.8.0.31  
       aif_core.framework   AdobeAIF   5.0.00   79.534508
       aif_ocl.framework   AdobeAIF   5.0.00   79.534508
       aif_ogl.framework   AdobeAIF   5.0.00   79.534508
       AlignmentLib.framework   xcode   Copyright © 2013 Adobe Systems Incorporated  
       amtlib.framework   amtlib   7.0.0.249  
       boost_date_time.framework   boost_date_time   7.0.0.0  
       boost_signals.framework   boost_signals   7.0.0.0  
       boost_system.framework   boost_system   7.0.0.0  
       boost_threads.framework   boost_threads   7.0.0.0  
       Cg.framework   NVIDIA Cg     
       CIT.framework   CIT   2.1.6.30929   151865
       CITThreading.framework   CITThreading   2.1.6.30929   151865
       dvaaudiodevice.framework   dvaaudiodevice   7.0.0.0  
       dvacore.framework   dvacore   7.0.0.0  
       dvamarshal.framework   dvamarshal   7.0.0.0  
       dvamediatypes.framework   dvamediatypes   7.0.0.0  
       dvaplayer.framework   dvaplayer   7.0.0.0  
       dvatransport.framework   dvatransport   7.0.0.0  
       dvaunittesting.framework   dvaunittesting   7.0.0.0  
       dynamiclink.framework   dynamiclink   7.0.0.0  
       FileInfo.framework   FileInfo   79.154511   79.154511
       filter_graph.framework   AdobeAIF   5.0.00   79.534508
       ICUConverter.framework   ICUConverter   3.61   "gtlib_3.0" "." "16615"
       ICUData.framework   ICUData   3.61   "gtlib_3.0" "." "16615"
       LogSession.framework   LogSession   2.1.2.1785  
       mediacoreif.framework   mediacoreif   7.0.0.0  
       patchmatch.framework   patchmatch   1.2.00.31977   79.542390
       PlugPlugOwl.framework   PlugPlugOwl   4.2.0.36  
       UpdaterNotifications.framework   UpdaterNotifications   7.0.1.102   "7.0.1.102"
       WRServices.framework        
    Required plug-ins:
       3D Studio 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
       Accented Edges 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Adaptive Wide Angle 14.2, Copyright © 2014 Adobe Systems Incorporated - from the file “Adaptive Wide Angle.plugin”
       Angled Strokes 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Average 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “Average.plugin”
       Bas Relief 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       BMP 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Camera Raw 8.3 (141), Copyright © 2013 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
       Camera Raw Filter 8.3 (141), Copyright © 2013 Adobe Systems Incorporated - from the file “Camera Raw.plugin”
       Chalk & Charcoal 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Charcoal 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Chrome 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Cineon 14.2 x001  ©2002-2014 Adobe Systems Incorporated - from the file “Cineon.plugin”
       Clouds 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “Clouds.plugin”
       Collada DAE 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
       Color Halftone 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Colored Pencil 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       CompuServe GIF 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Conté Crayon 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Craquelure 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Crop and Straighten Photos 14.2 x001  ©2003-2014 Adobe Systems Incorporated - from the file “CropPhotosAuto.plugin”
       Crop and Straighten Photos Filter 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Crosshatch 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Crystallize 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Cutout 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Dark Strokes 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       De-Interlace 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Dicom 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “dicom.plugin”
       Difference Clouds 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “Clouds.plugin”
       Diffuse Glow 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Displace 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Dry Brush 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Eazel Acquire 14.2 x001  ©1997-2014 Adobe Systems Incorporated - from the file “EazelAcquire.plugin”
       Embed Watermark NO VERSION - from the file “DigiSign.plugin”
       Entropy 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Extrude 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       FastCore Routines 14.2 x001  ©1990-2014 Adobe Systems Incorporated - from the file “FastCore.plugin”
       Fibers 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Film Grain 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Filter Gallery 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Flash 3D 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
       Fresco 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Glass 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Glowing Edges 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Google Earth 4 KMZ 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
       Grain 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Graphic Pen 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Halftone Pattern 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       HDRMergeUI 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “HDRMergeUI.plugin”
       IFF Format 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Ink Outlines 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       JPEG 2000 14.2 x001  ©2001-2014 Adobe Systems Incorporated - from the file “JPEG2000.plugin”
       Kurtosis 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Lens Blur 14.2, Copyright © 2002-2014 Adobe Systems Incorporated - from the file “Lens Blur.plugin”
       Lens Correction 14.2, Copyright © 2002-2014 Adobe Systems Incorporated - from the file “Lens Correct.plugin”
       Lens Flare 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Liquify 14.2, Copyright © 2001-2014 Adobe Systems Incorporated - from the file “Liquify.plugin”
       Matlab Operation 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
       Maximum 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Mean 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Measurement Core 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “MeasurementCore.plugin”
       Median 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Mezzotint 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Minimum 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       MMXCore Routines 14.2 x001  ©1990-2014 Adobe Systems Incorporated - from the file “MMXCore.plugin”
       Mosaic Tiles 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Multiprocessor Support 14.2 x001  ©1990-2014 Adobe Systems Incorporated - from the file “MultiProcessor Support.plugin”
       Neon Glow 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Note Paper 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       NTSC Colors 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “NTSC Colors.plugin”
       Ocean Ripple 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Oil Paint 14.2, Copyright © 2014 Adobe Systems Incorporated - from the file “Oil Paint.plugin”
       OpenEXR 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Paint Daubs 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Palette Knife 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Patchwork 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Paths to Illustrator 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       PCX 14.2 x001  ©1989-2014 Adobe Systems Incorporated - from the file “PCX.plugin”
       Photocopy 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Photoshop 3D Engine 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “Photoshop3DEngine.plugin”
       Photoshop Touch CC (14.2.0.0) ©1993-2014 Adobe Systems Incorporated - from the file “PSDX.plugin”
       Picture Package Filter 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “ChannelPort.plugin”
       Pinch 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Pixar 14.2 x001  ©1989-2014 Adobe Systems Incorporated - from the file “Pixar.plugin”
       Plaster 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Plastic Wrap 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       PNG 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Pointillize 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Polar Coordinates 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Portable Bit Map 14.2 x001  ©1989-2014 Adobe Systems Incorporated - from the file “PBM.plugin”
       Poster Edges 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Radial Blur 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Radiance 14.2 x001  ©2003-2014 Adobe Systems Incorporated - from the file “Radiance.plugin”
       Range 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Read Watermark NO VERSION - from the file “DigiRead.plugin”
       Reticulation 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Ripple 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Rough Pastels 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Save for Web 14.2, Copyright © 1999-2014 Adobe Systems Incorporated - from the file “Save for Web.plugin”
       ScriptingSupport 14.2, Copyright © 2014 Adobe Systems Incorporated - from the file “ScriptingSupport.plugin”
       Shake Reduction 14.2, Copyright © 2014 Adobe Systems Incorporated - from the file “Shake Reduction.plugin”
       Shear 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Skewness 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Smart Blur 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Smudge Stick 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Solarize 14.2 x001  ©1993-2014 Adobe Systems Incorporated - from the file “Solarize.plugin”
       Spatter 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Spherize 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Sponge 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Sprayed Strokes 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Stained Glass 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Stamp 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Standard Deviation 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       STL 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
       Sumi-e 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Summation 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Targa 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Texturizer 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Tiles 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Torn Edges 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Twirl 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Underpainting 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Vanishing Point 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “VanishingPoint.plugin”
       Variance 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “statistics.plugin”
       Water Paper 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Watercolor 14.2, Copyright © 1991-2014 Adobe Systems Incorporated - from the file “Filter Gallery.plugin”
       Wave 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Wavefront|OBJ 14.2 x001  ©2006-2014 Adobe Systems Incorporated - from the file “U3D.plugin”
       Wind 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
       Wireless Bitmap 14.2 x001  ©1989-2014 Adobe Systems Incorporated - from the file “WBMP.plugin”
       ZigZag 14.2, Copyright © 2003-2014 Adobe Systems Incorporated - from the file “Standard Multiplugin.plugin”
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
       Adobe Exchange
    Installed TWAIN devices: NONE

  • Authorization problem when displaying icons in BW Report

    Hi All
    I have the following problem when display BW Report as iView: The report data itself is displayed perfectly but to display the icons (like DrillDown arrows, Hierarhy level open arrows) the Windows login message "Connect to <my BW server.com>:8000" appears and I have to enter BW user name and password explicitly. The system for BW is defined, the user is mapped, UIDPW method is used. Again, the report data itself is displayed, the problem is only with icons. I can see that the path to icons is like:
    http://<my BW server>.com:8000/sap/bw/Mime/BEx/Icons/s_b_up.gif
    How could I rid of this authorization request?

    Thanks! I already did this and it helped for most of icons. But for five remaining icons i still get authorization request althoug these icons are in the same path. The icons are:
    http://<server>.com/sap/bw/Mime/BEx/Icons/cascading.gif
    http://<server>.com/sap/bw/Mime/BEx/Icons/checked.gif
    http://<server>.com/sap/bw/Mime/BEx/Icons/separator.gif
    http://<server>.com/sap/bw/Mime/BEx/Icons/marked_right_35.gif
    http://<server>.com/sap/bw/Mime/BEx/Icons/loading.gif

  • Why I can't open google maps on Safari? Everything have been working normally with my computer. But this problem with google maps I can't fix

    Why I can't open google maps on Safari? Everything have been working normally with my computer. But this problem with google maps I can't fix

    Do you have an example? I develop Google maps for Web pages and haven't had problem with Safari and its extensions, only FF which I took out all the addons and plug-ins, but it wouldn't surprise if the Google map code doesn't display the map or information for the map or doesn't work with newer versions of Safari.

  • Upgrading from XI/PI7.0 to 7.1 having problems with message mapping

    Hello,
    We are in the process over the past week of testing our XI/PI functionality after upgrading our 7.0 XI/PI environment to PI7.1; in particular several maps that were accessible in 7.0 will not open or diaplay in 7.1 complaining of a missing node in the mapping structure. Currently working with SAP on a possible fix but wanted to know if anyone else has done a true migration on top of an existing XI/PI7.0 system and experiencing similar issues (note: the maps can execute in the runtime environment but we can't display the maps source within message mapping; this also does not occur for all maps and there is no clear consistant theme to those that can be displayed and those that can't).
    The lattest issue just encountered related to message mapping is that in test mode of a map (that can be displayed) attempting to display the data queue for the mapped elements are blank no data being displayed giving an error noting that the source text of object message mapping: name of the map; has syntax errors, java area import line x, package ibm.com.xi.mapping does not exist/ import ibm.com.xi.mapping UDF:
    Has anyone upgraded from PI7.0 to 7.1 and experienced errors with existing maps that worked ok (ans still work in our QX/PRD systems) in their 7.0 envirinment but encountereing strange errors once upgrated to 7.1?
    Thanks
    Dereck Purnell
    NewellRubbermaid

    Here is the solution we received from SAP to address the issue, there were several mapping related issues we started havng from maps that worked in our 7.0 system prior to the upgrade to PI 7.1. I will try to encorporate the solutions in this response.
    a) From Customer to SAP
    1. We are unable to open some massage mapping, it is throwing
    exception
    2. Number Format functions throw exception.
    But following issue is still unresolved:
    3. When we display message queue, it throws exception
    ***) 05.02.2009 - 12:34:33 CET - Reply by SAP     
    The patch has been released at the Service Marketplace.
    Please update the scas described in the note 1264871.
    The "FormatNum" function issue has also been taken care in this patch.
    Please go through the Note 1264871 for other behaviour changes after
    upgrade. Let us know if you need any further help.
    Regards,
    B) From Customer to SAP
    04.02.2009 - 00:23:44 CET - Info for SAP
    We discovered another issue with mapping.
    For some of the mappings, we are unable to display mapping queue. When
    we execute, Interface mapping and Massage mapping, it works fine. But
    display queue throws exception. Itu2019s not able to recognize libraries
    used from dependent software component.
    Please find document "Display Mapping Queue Issue" providing example
    problem.
    25.02.2009 - 07:05:28 CET - *Reply by SAP*     
    Thank you for your update. I wanted to check with "CopyValue"
    function's index. It has to take an input integer and the problem that
    found while debugging the opening of your mapping is that the input
    was empty thus causing the exception.
    I was going to suggest the intended use of "CopyValue" function.
    When the input to "copyValue" is a constant, "copyValue" is totally
    not necessary. Thus constant can be directly mapped to other function.
    When the input is a node with values in context, you can treat one of
    values say input[0] to used in mapping by using CopyValue[0].
    But please make sure that input[0] will always produce a value.
    Note 877964 will describe in detail on Copyvalue usage.
    I am marking this Message as complete. Please confirm.

  • Problems with Parameter Mapping

    Hi All,
    I have problems with parameter-mapping. For me its a black box, sometimes it works sometimes not.
    Lots of times my mappings doesnt work, and I dont know the reason.
    For example: I want to map my Execution-CO to the Display-CO. For that I map the in the affected Action.
    But it doesnt work, although I do have the same Context Structures, because its the same CO. The technical Name is also the same.
    What could it be?
    Thanks for answering me
    Bye Steve

    Hi Andre,
    sorry for my late answer, but I'm writing my diploma thesis and wasnt at work since wednesday and so I dont have a access to our GP-System.
    Hope I understood you right.
    The Use Case of parameter mapping is that Users of further steps has the possibility to see the Input of previous steps.
    When I dont map the parameter inside one action, it isnt possible. I tried it out with the SAP example "Time-off-process". I took the CO "Create Request" and add it in one Action (as Display &  Execution). When I understand you right mapping inside an action is not necessary, to see the Inputs from further Actions --> But this way I cannot see the Inputs.  
    The mapping of my application works before I changed it.
    I know never touch a running system, but It was necessary, we need a new Input and Output Parameter.
    Cause I have 20 parameter the mapping was very time-consuming, to map every single parameter. I read a method to reduce the time: Adding a structure requires only mapping of the two structures. But now the Mapping doesnt work.
    Hope you can help me
    Bye Steve

  • Floating point display mapping

    To avoid negative values I convert my images to floating point when they are full 16 bit.
    But now i have another problem. De 16 bit display mapping function does not work. I i want to display a range of pixels (ex. grey values 40000 - > 50000) nothing happens. Is there a way to display a floating point image with a function like there is for 16 bit images (given range) without converting the actual pixels.

    This VI does only what the 16 bit display mapping function does (exept that there is an error made in this VI). The included 16 bit image is not full 16 bit (min = 176, max = 4095, only 15 bits are used). In attachment I included for you a full 16 bit image (values from 0 -> 65536) Imaq will read this as values ranging from -32768 -> 32767.
    If you open this Image with the VI you suggested you will get a full black 8 bit image. The original image is a gray gradient from black to white.
    The error in this VI is that the casting to I32 has to be done before you use the max-min function.
    Otherwise you get 32767 -(-32768) = -1 because you have an overflow with I16.
    This VI is not a solution because we have to analyze full 16 bit images for
    there real gray values.
    So if we convert the image to 8 bit we loose information. So if we take a line profile or a histogram it is difficult to use if the image is full 16 bit.
    I can not understand why a signed data type is used for images. Images don't have negative values.
    This is not the first time I mentioned this. I hope that NI understands the problem.
    Attachments:
    16bitgradient.tif ‏520 KB

  • Problem with user mapping

    Hello,
    We got a problem with user-mapping to a SAP system.
    We create a SAp system, and an alias to this system.
    We add a user mapping for the administrator (user, not group). Check for connector is OK.
    Now, we make the same user-mapping for a group.
    if the user also belongs to the group "administrator" this mapping works, otherwise this fail with a message <b>"com.sapportals.portal.ivs.cg.SystemNotFoundException: Got null system object for alias R3HR".
    </b>After checking, there is no user-mapping for the "administrator" group, nor for the roles that belong to that group, nor for the user.
    So, it seem that the alias is only visible for an admin.
    does any one got an idea ? we are on SP14, Linux.
    regards
    Guillaume PATRY

    HI Guillaume,
    The user mapping is available for both Admin as well as end users.
    Open your system from System Administration>System Configuration>System Landscape.
    In the property editor,in dropdown for property category,
    select the logon method as UID?password and User Mapping type to admin/user.
    Then you can create a Group,map the system alias for this group and add users to this group.
    Also,in the property editor for the system,from dropdown for display,select permissions , and add the group to asssigned permissions as READ ONLY and select the checkbox for ENDUSER.
    Hope,this resolves your problem.
    Regards,
    Siddhartha

  • Problem in displaying the TaxRate columns .

    Hi Experts,
                            I am having a problem in displaying the 'TaxRate', in this Query there are some different Taxrate's columns  like-  ' 'Basic Excise Duty BED@10 %',  ' Education ces@2% ' , 'Secondary Education Cess @1%',    etc.   only  4 -5  tax's value should display  at a  time  and rest of  the TaxRate's  columns whose value is NULL  should not display.
    So, I want to display only those TaxRate's  columns whose  value  is not NULL  and If there is  no value for any taxrate's column  in the data, then it should Display only 'Excempt' column.
    This is my query...
    SELECT DISTINCT OSTA.Code , ORPC.DocNum AS 'Debit Note No.', ORPC.CardName AS 'Name', ORPC.CardCode AS 'code', ORPC.NumAtCard AS 'Supplier Ref.'  ,
                          RPC1.Dscription AS 'Description of Goods', ORPC.Address, RPC1.Quantity, RPC1.Price AS 'Rate', RPC1.LineTotal AS 'Amount', ORPC.DocDate,
                              (SELECT DISTINCT TaxRate
                                FROM          RPC4
                                WHERE      (staType = - 90) AND (StaCode = 'BED@10') AND (DocEntry = RPC1.DocEntry)) AS 'Basic Excise Duty BED@10 %',
                             (SELECT DISTINCT TaxRate
                                FROM          RPC4 AS RPC4_8
                                WHERE      (staType = - 60) AND (DocEntry = RPC1.DocEntry)) AS 'Education Cess @2%',
                             (SELECT DISTINCT TaxRate
                                FROM          RPC4 AS RPC4_7
                                WHERE      (staType = - 55) AND (DocEntry = RPC1.DocEntry)) AS 'Secondary Education Cess @1%',
                             (SELECT DISTINCT TaxRate
                                FROM          RPC4 AS RPC4_6
                                WHERE      (staType = 4) AND (StaCode = 'CST2') AND (DocEntry = RPC1.DocEntry)) AS 'Central Sales Tax(CST)',
                             (SELECT DISTINCT TaxRate
                                FROM          RPC4 AS RPC4_5
                                WHERE      (staType = 1) AND (StaCode = 'VAT4') AND (DocEntry = RPC1.DocEntry)) AS 'Input VAT@5%',
                              (SELECT DISTINCT TaxRate
                                FROM          RPC4 AS RPC4_4
                                WHERE      (staType = 1) AND (TaxRate = 12.500000) AND (StaCode = 'VAT12.5') AND (DocEntry = RPC1.DocEntry)) AS 'VAT12.5%',
                           (SELECT DISTINCT TaxRate
                                FROM          RPC4 AS RPC4_3
                                WHERE      (staType = 18) AND (StaCode = 'Add2') AND (DocEntry = RPC1.DocEntry)) AS 'ADD Tax 1%',
                                  (SELECT DISTINCT TaxRate
                                FROM          RPC4 AS RPC4_2
                                WHERE      (staType = 7) AND (DocEntry = RPC1.DocEntry)) AS 'Excempt'
    FROM         OSTA INNER JOIN
                          RPC4 AS RPC4_1 ON OSTA.Code = RPC4_1.StaCode CROSS JOIN
                          ORPC INNER JOIN
                          RPC1 ON ORPC.DocEntry = RPC1.DocEntry
    WHERE     (OSTA.Code IN ('BED@10','eCess 2%','HeCess 1%','CST')) AND (ORPC.CardCode = 'V00308') AND (ORPC.DocNum = '9220004')
    Kindly help me to solve this problem
    Regards
    Rahul

    Hi rahul,
    Try this:
    SELECT DISTINCT T0.DocNum AS 'Debit Note No.', T0.CardName AS 'Name', T0.CardCode AS 'code', T0.NumAtCard AS 'Supplier Ref.'
         ,T1.Dscription AS 'Description of Goods', T0.Address, T1.Quantity, T1.Price AS 'Rate', T1.LineTotal AS 'Amount', T0.DocDate,
         (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0)FROM RPC4 WHERE RPC4.StaType = -90 AND RPC4.DocEntry = T0.DocEntry) AS 'Basic Excise Duty BED@10 %',
         (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = -60 AND RPC4.DocEntry = T0.DocEntry) AS 'Education Cess @2%',
         (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = -55 AND RPC4.DocEntry = T0.DocEntry) AS 'Secondary Education Cess @1%',
         (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = 4  AND RPC4.StaCode = 'CST2' AND RPC4.DocEntry = T0.DocEntry) AS 'Central Sales Tax(CST)',
         (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = 1  AND RPC4.StaCode = 'VAT4'AND RPC4.DocEntry = T0.DocEntry) AS 'Input VAT@5%',
         (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = 1 AND RPC4.StaCode = 'VAT12.5'AND RPC4.DocEntry = T0.DocEntry) AS  'VAT12.5%',
         (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = 18 AND RPC4.StaCode = 'Add2'AND RPC4.DocEntry = T0.DocEntry) AS   'ADD Tax 1%',
         (SELECT DISTINCT ISNULL (SUM(RPC4.TaxRate),0) FROM RPC4 WHERE RPC4.StaType = 7 AND RPC4.DocEntry = T0.DocEntry) AS  'Excempt'
    FROM ORPC T0
         INNER JOIN RPC1 T1 ON T0.DocEntry = T1.DocEntry
    WHERE  (T0.CardCode = 'V00308') AND (T0.DocNum = '9220004')
    FOR BROWSE
    Thanks,
    Neetu

  • Problem with displaying BLOB images on JSP page using a servlet

    hi. I have a big problem with displaying BLOB images using JSP. I have a servlet that connects to the oracle database, gets a BLOB image , reads it, and then displays it using a BinaryStream. The problem is , this works only when i directly call that servlet, that is http://localhost:8080/ImageServlet. It doesn't work when i try to use that servlet to display my image on my JSP page (my JSP page displays only a broken-image icon ) I tried several coding approaches with my servlet (used both Blob and BLOB objects), and they work just fine as long as i display images explicitly using only the servlet.
    Here's what i use : ORACLE 10g XE , Eclipse 3.1.2, Tomcat 5.5.16 , JDK 1.5
    here is one of my image servlet's working versions (the essential part of it) :
                   BLOB blob=null;
              rset=st.executeQuery("SELECT * FROM IMAGES WHERE ID=1");
              while (rset.next())
                   blob=((OracleResultSet)rset).getBLOB(2);
              response.reset();
              response.setContentType("image/jpeg");
              response.addHeader("Content-Disposition","filename=42.jpeg");
                    ServletOutputStream ostr=response.getOutputStream();
                   InputStream istr=blob.getBinaryStream(1L);
                    int size=blob.getBufferSize();
              int len=-1;
                    byte[] buff = new byte[size];
                         while ((len=istr.read( buff ))!=-1 ) {
                   ostr.write(buff,0,len);
             response.flushBuffer();
             ostr.close(); and my JSP page code :
    <img src="/ImageServlet" border="0"  > If you could just tell me what i'm doing wrong here , or if you could show me your own solutions to that problem , i would be very greatful ,cos i'm realy stuck here , and i'm rather pressed for time too. Hope someone can help.

    I turns out that it wasn't that big of a problem after all. All i had to do was to take the above code and place it into another JSP page instead of into a servlet like i did before. Then i just used that page as a source for my IMG tag in my first JSP. It works perfectly well. Why this doesn't work for servlets i still don't know, but it's not a problem form me anymore . Ofcourse if someone knows the answer , go ahead and write. I would still appriceatte it.
    here's the magic tag : <img src="ImageJSP.jsp" border="0"  > enjoy : )

  • Problem with display of JScrollPane

    I have made a small GUI.
    It has a JFrame and four JPanels are added to the frame.
    The placement is done by program and hence layout manager is set to null.
    Two of the panels contain JScrollPane.
    One scroll pane is associated with a JList.
    Another scroll pane is associated with a JTextArea.
    I am creating panel components in their respective paintComponent() method.
    Now my problem is whenever I run the code, the behaviour of the display of the GUI is erratic. Sometimes it appears perfectly fine other times the JList contents and JTextArea along with their scroll bars don't appear. I have tried running the code on different platforms and different systems. On some systems it works perfectly fine, on some it behaves erratically.
    Moreover my experience is that it is giving problem on somewhat lower configuration systems (low RAM and CPU) and running fine on higher configuration systems.
    I ran it on my laptop with 512MB RAM and centrino duo processor. (Both on windows and ubuntu it gave the same problem, random display behavior)
    I ran it on a desktop with 1GB RAM and higher processor (Both on windows and ubuntu it displayed fine)
    Does this problem relate to insufficient painting time or something of this sort? Why is this problem is coming and what's the solution?
    Thanks in advance.
    Also if anybody has encountered similar problem please do share so that I could at least say this is not a unique one.

    The placement is done by program and hence layout manager is set to null.That is (probably) your first problem. Learn to use use LayoutMangers, they save time in the long run.
    Sometimes it appears perfectly fine other times the JList contents and JTextArea along with their scroll bars don't appearProbably because preferred sizes are not set correctly. Since you are not using a layout manager that is your responsibility. Easy solution is to use a proper combination of layout managers.
    I am creating panel components in their respective paintComponent() method.That is (probably) your second problem. paintComponent() is for doing custom painting, not creating new components dynamically.
    I suggest you start by reading the Swing tutorial for example programs.

  • Problem with display of Buttons in ADF

    Hi All,
    I had a strange problem in display of the ADF Page in one of the server.I had two buttons inside ToolBars, The UI was coming fine in the two WLS, But when I deployed the application in third WLS, I was seeing that Buttons are coming in the top of screen,
    Kindly let me know as to why Iam not to replicate the issue in my earlier WLS.Please find my code
    <?xml version='1.0' encoding='UTF-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
    xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
    xmlns:f="http://java.sun.com/jsf/core">
    <af:panelStretchLayout id="psl1">
    <f:facet name="center">
    <af:panelGroupLayout id="pgl1">
    <af:panelBox text="Service Request#: #{bindings.srNumber.inputValue}" id="pb1">
    <af:spacer width="10" height="10" id="s1"/>
    <af:outputText value="Service Request#: #{bindings.srNumber.inputValue}"
    id="ot18" inlineStyle="font-weight:bold;"
    rendered="false"/>
    <af:spacer width="15" height="10" id="s2"/>
    <af:separator id="s3" rendered="false"/>
    <af:panelFormLayout id="pfl1">
    <af:inputText value="#{bindings.subject.inputValue}" label="Summary"
    required="true" columns="100" maximumLength="100" id="it3" showRequired="true">
    <f:validator binding="#{bindings.subject.validator}"/>
    </af:inputText>
    <af:inputText value="#{bindings.description.inputValue}"
    label="Description" required="true" columns="100"
    maximumLength="1999" id="it2"
    rows="7" showRequired="true">
    <f:validator binding="#{bindings.description.validator}"/>
    </af:inputText>
    </af:panelFormLayout>
    <af:separator id="s4" rendered="false"/>
    </af:panelBox>
    <af:toolbar id="tb1">
    <af:group id="g1">
    <af:commandButton text="#{pageFlowScope.MySRBean.reopenSrBackButtonLabel}" id="cb2"
    action="backtodetails" accessKey="G"
    immediate="true" inlineStyle="border-style:outset; border-width:medium; outline-color:Gray;"/>
    <af:commandButton text="#{pageFlowScope.MySRBean.reopenSrConfirmReopenButtonLabel}" id="cb3"
    action="success"
    actionListener="#{pageFlowScope.MySRBean.reOpenSR}"
    accessKey="C" inlineStyle="border-style:outset; border-width:medium; outline-color:Gray;"/>
    </af:group>
    </af:toolbar>
    </af:panelGroupLayout>
    </f:facet>
    </af:panelStretchLayout>
    </jsp:root>
    thanks
    Krishnaveni

    User, please always tell us your jdev version.
    The interesting part is what you did not tell us.
    Kindly let me know as to why Iam not to replicate the issue in my earlier WLS.Please find my code means hte code has once run OK and now after you did some changes doesn't any longer. Querstion: what did you change, not oly to the code but to the environment.
    Timo

  • I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?

    I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
    Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.

    If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

  • Problem to display a negative number in XML Publisher output in excel

    Hi All,
    I am facing problem in displaying a negative number in XML Publisher output in excel.
    My requirement is that I have to display a negative number in brackets when the output is taken in excel format. Eg: If the value is -123 then i have to display it as (123).
    I have put these brackets using a formula column in the RDF, but it is the default functionality of excel that whenever there is a number in brackets then it automatically displays that as a negative value.
    Can anyone please help me how I can display this negative number within brackets and not as a negative digit. Is there any special tag or is there any formula which can be used to convert this into text and written in the Help text of RTF template.
    This is very urgent. If someone knows please reply asap.
    Regards,
    Shruti

    This is very urgent. If someone knows please reply asap.We are all volunteers here, so no ones questions are more urgent then other ones.
    If its that urgent it would have helped if you had chosen the correct forum to ask your question BI Publisher

Maybe you are looking for

  • How to print red color in plain paper?

    When printed on glossy papers, red color (in photo or text) looks great. When I print on non-photo, plain papers, red color came out brownish. I tried on premium ink jet papers, it does not print red but in brown color. How can I print red color in p

  • How do you add Jam Packs to the Logic Express 8 Loop Library?

    I'm new to both Logic Express and Jam Packs. I just installed the new Voices Jam Pack and it is installed in the audio folder in my user library but it isn't recognized by logic, since the loops don't show up in the loop browser. I do not know how to

  • Pictures folder in finder vs iphoto library

    Is there a resource designed to help me navigate the difference between the pictures folder in the finder screen vs the iphoto library? I am having a hard time keeping track of where my pictures are being stored. I have tried dragging files from one

  • Force Variable screen even the second time

    Hi guru's, I want to know how to force the variable screen in Web Analyzer each time the user open the query. I already set up the correct option to force the variable screen in my web template , but this option is Ok for the queries wich don't have

  • Reg:classes

    Hi, in the following code im not getting the output.plz tell me why tables:mara. data:obj type ref to cl_gui_alv_grid. data:cust type ref to cl_gui_custom_container. data:itab like mara occurs 0 with header line. select-options:s_matnr for mara-matnr