Problem in Domain Server for Cluster SAP installation
Hello,
SAP Production Landscape Information :
SAP Version: ECC 6.0
OS: Windows 2003
Database : Oracle 10.2.0.2
Production Server is in MSCS cluster involving two nodes.
Also, this is a domain installation and hence user SAPSID and SAPSERVICESID resides on altogether different domain Server.
Problem:
OS of u2018Windows domain serveru2019 has crashed. Hence, domain server is almost not usable.
Restart of it takes several hours. Repair of OS is tried by Microsoft without any success.
So this has resulted into communication problem between SAP Production server and Domain server. As an effect, restart of production server takes approximately an hour.
And hence I need some solution to resolve this SAP Server Domain Server link.
Logically, following can be solution of this problem,
1. If Current SAP Production can be made as Local Installation instead of Domain installation. (Basically, creating users locally and making SAP refer that)
2. If above is not feasible then replicating domain server on new hardware and making SAP point to this new domain server.
However, I am not sure about feasibility and procedures for both of above cases.
Please let me know your views and any other solution for the same.
Thanks and Regards,
Nirav.
Hi Markus,
Thanks for your reply.
Possibility of converting domain installation to local is ruled out as MSCS cluster needs domain.
As you have rightly mentioned, I do have secondary domain sever.
For More information:
1)Domain details for primary server are
Full computer name : APPL-SERVER.SHREE
domain : SHREE
as secondary server is kept shutdown, details are not available. (I can't run both server running simultaneously)
2)sqlplus "/as sysdba"
sql> select username from dba_users;
TSMSYS
OPS$SHREE\SAPSERVICEPRD
OUTLN
OPS$SHREE\PRDADM
DIP
DBSNMP
SAPPRD
SYS
SYSTEM
3) In the services, mainly users are using SHREE\PRDADM & PASSWORD.
Client have tried shutting down primary and promoting secondary domain controller. However, after that SAP service were not getting started. But on again starting primary controller,start of SAP services were successful.
As can be seen in 2nd & 3rd point above,SAP database and SAP services both refer to name "SHREE" which seems domain name and not to hostname.
So in this case, when I start secondary domain server (primary is shut down) then as SAP is referring to domain name, SAP's service should start.
However, that was not the case. SAP Services were not able to get started.
So, do we have to change anything in SAP as to make it point to secondary domain server.
Let me know your views.
Regards,
Nirav.
Similar Messages
-
Common content server for 2 SAP systems
Hello Friends,
We have configured a common content server for 2 SAP systems, say A & B using oac0 and csadmin, have set 2 content rep C1 for A & C2 for B resp. Please let me know if this is fine?
other thing is when i go to t-code csadmin on both the systems, for A - C2 displays customizing missing and for B - C1 displays customizing missing.but the systems are running fine and we are able to checkin documents
please let me know why it shows customizing missing?
Regards
SurjitHi,
The customizing missing message is due to 2 different SAP system. Means when you activate the content server thru CSADMIN the certificate is used only one. Right! Now physical systems are two so in both the cases it will show one as customizing missing because no physical rep available for missing one. But these will work at it's own level fine because the one is available as a physical rep in each case.
Hope this will resolve the query.
Regards,
Ravindra -
Problem starting managed server in Cluster
Hi,
I'm using cluster with 2 managed server. other managed server2 is runing ok in the cluster now when I am starting managed server1 in a cluster this error is coming
The WebLogic Server encountered a critical failure
Reason: Assertion violated
Exception in thread "main" java.lang.NoClassDefFoundError
at weblogic.protocol.ServerIdentityManager.findServerIdentity(ServerIdentityManager.java:65)
at weblogic.protocol.URLManager.findAdministrationURL(URLManager.java:170)
at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:677)
at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:406)
at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:392)
at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:172)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:373)
at weblogic.Server.main(Server.java:67)
Could you pl tell the reason of this error?
Thanks in advance
Hi,
Can anybody help?
Edited by: user10680571 on Dec 4, 2008 4:42 AMThanks David.
During starting this managed server in cluster when I do tail -f <log_file_name> I can see this error message. But this message I can't see in log however ending log details- Is this something related with CLASSPATH problem?
<04-Dec-2008 10:11:18 o'clock GMT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to t
he end of the classpath:
/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n-schemas.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_c
ommon.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wl
p/netuix_common.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/netuix_schemas.jar:/software/bea/wls/920/weblogic92/pla
tform/lib/wlp/netuix_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/wsrp-common.jar>
<04-Dec-2008 10:11:21 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Serve
r VM Version 1.5.0_07-b03 from Sun Microsystems Inc.>
<04-Dec-2008 10:11:33 o'clock GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 Fri Jun 23 20:47:26 EDT 20
06 783464 >
<04-Dec-2008 10:12:06 o'clock GMT> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /software/bea/wls/920/license.bea>
<04-Dec-2008 10:12:06 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<04-Dec-2008 10:12:06 o'clock GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<04-Dec-2008 12:12:26 o'clock GMT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to t
he end of the classpath:
/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n-schemas.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_c
ommon.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wl
p/netuix_common.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/netuix_schemas.jar:/software/bea/wls/920/weblogic92/pla
tform/lib/wlp/netuix_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/wsrp-common.jar>
<04-Dec-2008 12:12:35 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Serve
r VM Version 1.5.0_07-b03 from Sun Microsystems Inc.>
<04-Dec-2008 12:13:03 o'clock GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 Fri Jun 23 20:47:26 EDT 20
06 783464 >
<04-Dec-2008 12:13:56 o'clock GMT> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /software/bea/wls/920/license.bea>
<04-Dec-2008 12:13:58 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<04-Dec-2008 12:14:00 o'clock GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<05-Dec-2008 06:21:55 o'clock GMT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to t
he end of the classpath:
/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n-schemas.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_c
ommon.jar:/software/bea/wls/920/weblogic92/platform/lib/p13n/p13n_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wl
p/netuix_common.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/netuix_schemas.jar:/software/bea/wls/920/weblogic92/pla
tform/lib/wlp/netuix_system.jar:/software/bea/wls/920/weblogic92/platform/lib/wlp/wsrp-common.jar>
<05-Dec-2008 06:21:57 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Serve
r VM Version 1.5.0_07-b03 from Sun Microsystems Inc.>
<05-Dec-2008 06:22:04 o'clock GMT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 Fri Jun 23 20:47:26 EDT 20
06 783464 >
<05-Dec-2008 06:22:23 o'clock GMT> <Info> <WebLogicServer> <BEA-000215> <Loaded License : /software/bea/wls/920/license.bea>
<05-Dec-2008 06:22:23 o'clock GMT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<05-Dec-2008 06:22:23 o'clock GMT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
Thanks for your help..... -
Problems Starting Weblogic Server for Tutorials (Fresh install)...
Hi guys, need a little help here.
I'm trying to startup Weblogic Server for Java Control Tutorial application and I get all sorts of errors, mostly seeming to deal with JMS/JNDI network stuff. Here's the error dump I get:
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Starting WLS with line:
C:\bea\JDK142~1\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket
,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms256m -Xmx256m -XX:Com
pileThreshold=8000 -XX:PermSize=32m -XX:MaxPermSize=128m -Xverify:none -ea -da
:com.bea... -da:javelin... -da:weblogic... -Dplatform.home=C:\bea\WEBLOG~1 -Dwls
.home=C:\bea\WEBLOG~1\server -Dwli.home=C:\bea\WEBLOG~1\integration -Dlog4j.con
figuration=file:C:\bea\WEBLOG~1\common\lib\workshopLogCfg.xml -Dweblogic.managem
ent.discover=true -Dweblogic.ProductionModeEnabled= -Dweblogic.security.SSL.ign
oreHostnameVerify=false -Dwlw.iterativeDev=true -Dwlw.testConsole=true -Dwlw.log
ErrorsToConsole=true -Dweblogic.Name=cgServer -Djava.security.policy=C:\bea\WEBL
OG~1\server\lib\weblogic.policy weblogic.Server
<Oct 30, 2005 2:33:31 PM PST> <Info> <WebLogicServer> <BEA-000377> <Starting Web
Logic Server with Java HotSpot(TM) Client VM Version 1.4.2_05-b04 from Sun Micro
systems Inc.>
<Oct 30, 2005 2:33:31 PM PST> <Info> <Configuration Management> <BEA-150016> <Th
is server is being started as the administration server.>
<Oct 30, 2005 2:33:31 PM PST> <Info> <Management> <BEA-141107> <Version: WebLogi
c Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic XMLX Module 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Server 8.1 SP4 Mon Nov 29 16:21:29 PST 2004 471647
WebLogic Integration 8.1 SP4 Tue Nov 30 10:34:16 PST 2004 471877>
<Oct 30, 2005 2:33:32 PM PST> <Notice> <Management> <BEA-140005> <Loading domain
configuration from configuration repository at C:\bea\WEBLOG~1\samples\domains\
workshop\.\config.xml.>
<Oct 30, 2005 2:33:33 PM PST> <Notice> <Log Management> <BEA-170019> <The server
log file C:\bea\weblogic81\samples\domains\workshop\cgServer\cgServer.log is op
ened. All server side log events will be written to this file.>
<Oct 30, 2005 2:33:34 PM PST> <Notice> <Security> <BEA-090082> <Security initial
izing using security realm myrealm.>
<Oct 30, 2005 2:33:34 PM PST> <Notice> <WebLogicServer> <BEA-000327> <Starting W
ebLogic Admin Server "cgServer" for domain "workshop">
<Oct 30, 2005 2:33:38 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:40 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:42 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:44 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:46 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgJMSPool-nonXA": SQL-server rejected establ
ishment of SQL-connection. Pointbase Server may not be running on localhost at p
ort 9093.>
<Oct 30, 2005 2:33:47 PM PST> <Error> <JDBC> <BEA-001150> <Connection Pool "cgJM
SPool-nonXA" deployment failed with the following error: 0:Could not create pool
connection. The DBMS driver exception was: SQL-server rejected establishment of
SQL-connection. Pointbase Server may not be running on localhost at port 9093..
>
<Oct 30, 2005 2:33:48 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:50 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:52 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:54 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:56 PM PST> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "cgPool": SQL-server rejected establishment o
f SQL-connection. Pointbase Server may not be running on localhost at port 9093.
>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JDBC> <BEA-001150> <Connection Pool "cgPo
ol" deployment failed with the following error: 0:Could not create pool connecti
on. The DBMS driver exception was: SQL-server rejected establishment of SQL-conn
ection. Pointbase Server may not be running on localhost at port 9093..>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JDBC> <BEA-001151> <Data Source "cgDataSo
urce" deployment failed with the following error: DataSource(cgDataSource;cgSamp
leDataSource) can't be created with non-existent Pool (connection or multi) (cgP
ool).>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JDBC> <BEA-001151> <Data Source "cgDataSo
urce-nonXA" deployment failed with the following error: DataSource(cgDataSource-
nonXA;weblogic.jdbc.jts.ebusinessPool) can't be created with non-existent Pool (
connection or multi) (cgJMSPool-nonXA).>
<Oct 30, 2005 2:33:57 PM PST> <Alert> <JMS> <BEA-040052> <JMSServer "cgJMSServer
" store failed to open java.io.IOException: JMS JDBC store, connection pool = <c
gJMSPool-nonXA>, prefix = <weblogic>: connection pool does not exist.
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix
= <weblogic>: connection pool does not exist
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:48
8)
at weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
60)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
28)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(Rem
oteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBean
ServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanPro
xy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(
ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployment
s(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
>
<Oct 30, 2005 2:33:57 PM PST> <Error> <JMS> <BEA-040123> <Failed to start JMS Se
rver "cgJMSServer" due to weblogic.jms.common.JMSException: JMS can not open sto
re cgJMSStore.
weblogic.jms.common.JMSException: JMS can not open store cgJMSStore
at weblogic.jms.backend.BEStore.start(BEStore.java:163)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Depl
oymentTarget.java:337)
at weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Dep
loymentTarget.java:597)
at weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeploy
ments(DeploymentTarget.java:575)
at weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(
DeploymentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMB
eanImpl.java:754)
at weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl
.java:733)
at weblogic.management.internal.ConfigurationMBeanImpl.invoke(Configurat
ionMBeanImpl.java:509)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
60)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:15
28)
at weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(Rem
oteMBeanServerImpl.java:988)
at weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBean
ServerImpl.java:946)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:954)
at weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanPro
xy.java:481)
at weblogic.management.configuration.ServerMBean_Stub.updateDeployments(
ServerMBean_Stub.java:7691)
at weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployment
s(SlaveDeployer.java:1304)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.j
ava:347)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resum
e(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
Caused by: java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-non
XA>, prefix = <weblogic>: connection pool does not exist
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:48
8)
at weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
... 29 more
>
<Oct 30, 2005 2:33:57 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
<Oct 30, 2005 2:33:58 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090170> <Loading the priv
ate key stored under the alias DemoIdentity from the jks keystore file C:\bea\we
blogic81\server\lib\DemoIdentity.jks.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090171> <Loading the iden
tity certificate stored under the alias DemoIdentity from the jks keystore file
C:\bea\weblogic81\server\lib\DemoIdentity.jks.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090169> <Loading trusted
certificates from the jks keystore file C:\bea\weblogic81\server\lib\DemoTrust.j
ks.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <Security> <BEA-090169> <Loading trusted
certificates from the jks keystore file C:\bea\JDK142~1\jre\lib\security\cacerts
.>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000331> <Started We
bLogic Admin Server "cgServer" for domain "workshop" running in Development Mode
>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000360> <Server sta
rted in RUNNING mode>
<Oct 30, 2005 2:33:58 PM PST> <Warning> <WebLogicServer> <BEA-000372> <HostName:
0.0.0.0, maps to multiple IP addresses:192.168.0.1,70.34.104.139>
<Oct 30, 2005 2:33:58 PM PST> <Warning> <WebLogicServer> <BEA-000372> <HostName:
0.0.0.0, maps to multiple IP addresses:192.168.0.1,70.34.104.139>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000355> <Thread "Li
stenThread.Default" listening on port 7001, ip address *.*>
<Oct 30, 2005 2:33:58 PM PST> <Notice> <WebLogicServer> <BEA-000355> <Thread "SS
LListenThread.Default" listening on port 7002, ip address *.*>
<Oct 30, 2005 2:34:07 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. Connection failed after 2 attempts. The MDB will attempt to
reconnect every 10 seconds. This log message will repeat every 600 seconds until
the condition clears.>
<Oct 30, 2005 2:34:07 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
<Oct 30, 2005 2:34:08 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. Connection failed after 2 attempts. The MDB will attempt to reconnect every
10 seconds. This log message will repeat every 600 seconds until the condition
clears.>
<Oct 30, 2005 2:34:08 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:44:08 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. Connection failed after 62 attempts. The MDB will attempt to reconnect ever
y 10 seconds. This log message will repeat every 600 seconds until the condition
clears.>
<Oct 30, 2005 2:44:08 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:44:17 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. Connection failed after 63 attempts. The MDB will attempt to
reconnect every 10 seconds. This log message will repeat every 600 seconds unti
l the condition clears.>
<Oct 30, 2005 2:44:17 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
<Oct 30, 2005 2:54:08 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. Connection failed after 122 attempts. The MDB will attempt to reconnect eve
ry 10 seconds. This log message will repeat every 600 seconds until the conditio
n clears.>
<Oct 30, 2005 2:54:08 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: KNEX.bean.QueueTransport is unable to connect to the JMS destination: jws.qu
eue. The Error was:
[EJB:011010]The JMS destination with the JNDI name: jws.queue could not be found
. Please ensure that the JNDI name in the weblogic-ejb-jar.xml is correct, and t
he JMS destination has been deployed.>
<Oct 30, 2005 2:54:17 PM PST> <Warning> <EJB> <BEA-010096> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. Connection failed after 123 attempts. The MDB will attempt t
o reconnect every 10 seconds. This log message will repeat every 600 seconds unt
il the condition clears.>
<Oct 30, 2005 2:54:17 PM PST> <Warning> <EJB> <BEA-010061> <The Message-Driven E
JB: CreditScoreTutorial is unable to connect to the JMS destination: tutorial.cr
edit.request.topic. The Error was:
[EJB:011010]The JMS destination with the JNDI name: tutorial.credit.request.topi
c could not be found. Please ensure that the JNDI name in the weblogic-ejb-jar.x
ml is correct, and the JMS destination has been deployed.>
THANK YOU for any help you can provide!These are errors/warning because of incorrect connection pool settings.Either the database parameters were not configured correctly or there were some issues with the configuration itself.
Your server did start up correctly though.
"<Server started in RUNNING mode>" -
Problem: "Contacts the server for iphone software updates"
Hi,
Itunes starts contacting server for iphone software updates. Waited for one hour, but nothing happens.
I´ve tried several times, but no luck
Any ideas?
ThanksJust want to add myself to the list of people with the same problem.
-
Hi all problem with sql server 2008 in sap b1 2005 PL38,42
Hello Sir,
We are also facing this problem. Our client has purchased SQL 2008 & we have installed SAP B1 PL 05 & also we have to upgrade it to PL 26 atleast for installing TDS Add on 4.8 so that Project runs smoothly.
Can u specify the status? i.e. at what stage is that upgradation? or by how much time this problem will be solved? Bcoz we are on the stage of test go live & we cant take back up of database of SQL 2008 & restore it in SQL 2005. We will have to do all settings in new company with database in SQL 2005.
Pls reply at the earliest.Hi Nilesh,
I wonder how you got B1 installed properly on MSSQL 2008, as MSSQl 2008 comes with a new Native Client connection.
Anyway I see two options:
(1) Keep the system as it is, meaning no upgrades of B1 and pray nothing will happen as long MSSQL Server 2008 is not supported.
(2) In order to get a supported environment the better option would be, to try a combination of CopyExpress and DTW and get all data and settings transfered into a new MSSQL 2005 based Database.
Kind regards
Mario Schoenberg
Senior Support Consultant
SAP Business One Forums Team -
Problem connecting weblogic server to cluster
Hi,
I am very new to WL/JMS/JNDI/EJB etc. I downloaded WL6.0, and tried to make a cluster. I started a server on one machine as Administrative server, and created a cluster. Now, I started another server on a different machine, as a managed server by adding the following parameter at startup
-Dweblogic.admin.host=http://admin-ipaddr:7001....,
I get the following error
Starting WebLogic Server ....
<Thu Oct 19 14:37:37 PDT 2000> <Error> <Configuration Management> <Error connecting to admin server to bootstrap via URL: http://admin-ipaddr:7001/Bootstrap, user: system
weblogic.management.configuration.ConfigurationException: Connection error: java.lang.SecurityException: Authentication for user system
denied in realm weblogic
at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:752)
at weblogic.management.Admin.initialize(Admin.java:275)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:345)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:160)
at weblogic.Server.main(Server.java:32)
>
<Thu Oct 19 14:37:37 PDT 2000> <Emergency> <Server> <Unable to initialize the server: Fatal initialization exception
Throwable: weblogic.management.configuration.ConfigurationException: connecting to http://admin-ipaddr:7001/Bootstrap - with nested exception:
[weblogic.management.configuration.ConfigurationException: Connection error: java.lang.SecurityException: Authentication for user system denied in realm weblogic]
weblogic.management.configuration.ConfigurationException: connecting to http://admin-ipaddr:7001/Bootstrap - with nested exception:
[weblogic.management.configuration.ConfigurationException: Connection error: java.lang.SecurityException: Authentication for user syste
m denied in realm weblogic]
at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:803)
at weblogic.management.Admin.initialize(Admin.java:275)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:345)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:160)
at weblogic.Server.main(Server.java:32)
>
I understand that all managed servers are supposed to use the same config file as the Admin server.
Also, I am not clear about the domain parameter.... what should I pass for -Dweblogic.Domain=mydomain (this is what is there in the batch file that comes). Should I change this parameter for Managed servers, which points to Admin domain? If so, how do I do that?
I am struck up on this. I'd greatly appreciate it some body could help me out.
thanks a lot,
Anil.
-Dweblogic.admin.host=admin-ipaddr:7001, you shouldn't specify protocol. Also please use beta newsgroup for 6.0 related questions.
anil wrote:
> Hi,
> I am very new to WL/JMS/JNDI/EJB etc. I downloaded WL6.0, and tried to make a cluster. I started a server on one machine as Administrative server, and created a cluster. Now, I started another server on a different machine, as a managed server by adding the following parameter at startup
> -Dweblogic.admin.host=http://admin-ipaddr:7001....,
>
> I get the following error
> Starting WebLogic Server ....
> <Thu Oct 19 14:37:37 PDT 2000> <Error> <Configuration Management> <Error connecting to admin server to bootstrap via URL: http://admin-ipaddr:7001/Bootstrap, user: system
> weblogic.management.configuration.ConfigurationException: Connection error: java.lang.SecurityException: Authentication for user system
> denied in realm weblogic
> at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:752)
> at weblogic.management.Admin.initialize(Admin.java:275)
> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:345)
> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:160)
> at weblogic.Server.main(Server.java:32)
> >
> <Thu Oct 19 14:37:37 PDT 2000> <Emergency> <Server> <Unable to initialize the server: Fatal initialization exception
> Throwable: weblogic.management.configuration.ConfigurationException: connecting to http://admin-ipaddr:7001/Bootstrap - with nested exception:
> [weblogic.management.configuration.ConfigurationException: Connection error: java.lang.SecurityException: Authentication for user system denied in realm weblogic]
> weblogic.management.configuration.ConfigurationException: connecting to http://admin-ipaddr:7001/Bootstrap - with nested exception:
> [weblogic.management.configuration.ConfigurationException: Connection error: java.lang.SecurityException: Authentication for user syste
> m denied in realm weblogic]
> at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:803)
> at weblogic.management.Admin.initialize(Admin.java:275)
> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:345)
> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:160)
> at weblogic.Server.main(Server.java:32)
> >
> ***************************************************************************
> I understand that all managed servers are supposed to use the same config file as the Admin server.
>
> Also, I am not clear about the domain parameter.... what should I pass for -Dweblogic.Domain=mydomain (this is what is there in the batch file that comes). Should I change this parameter for Managed servers, which points to Admin domain? If so, how do I do that?
>
> I am struck up on this. I'd greatly appreciate it some body could help me out.
>
> thanks a lot,
> Anil.
-
New Server for Preview SAP WAS ABAP and Java
Hi
I wish to purchase a new PC or server to specifically house my ABAP and Java preview installations rather than have them running on an old PC and laptop.
Anyone out there got some recommended configurations? Max spend will be £1500.
Cheers
IanIan,
Personally I wouldn't be happy running a server 24/7 at home but would want to just switch it on and the server start so would be looking to have some sort of script to run the relevant WAS instances automatically on startup.
160Gb hard drives would be ample. Could consider increasing the storage and then the system could double up as a backup device as well as a SAP server.
I've built systems in the past and that's the approach I'd take for this too. I don't mind buying pre-built systems but I
detest all the rubbish software they bundle with them. If you build it yourself you can install just Windows and it'll run like a dream.
This bundle looks interesting:
http://www.overclockers.co.uk/showproduct.php?prodid=BU-039-OK
The motherboard takes four memory modules so the 2Gb would consume two of these allowing for upgrades in the future if deemed necessary. Add in a couple of HD's, a DVD-RW, a cheap gfx card and a case and you'd easily get change from £800. Could spend a bit more to get more silent components too.
Now I've had a look around and priced them up I'm even more tempted!!!
Cheers,
JB -
We have the following setup.
CLLUSTER1 and CLUSTER2 are the servers to be in the cluster. CLUSTER3 is the cluster
administrator. We start CLUSTER3 as a self-managed server and then try and start
CLUSTER1 and CLUSTER3 as a managed server pointing at CLUSTER3. When we start
1 and 2 we get the following:
D:\bea\wlserver6.1\config\CLUSTER1>startmanagedweblogic CLUSTER3 http://10.0.1.1
03:7001
D:\bea\wlserver6.1>set PATH=.\bin;C:\WINNT\System32;d:\jdk1.3.1\bin
D:\bea\wlserver6.1>set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
D:\bea\wlserver6.1>echo off
* To start WebLogic Server, use the password *
* assigned to the system user. The system *
* username and password must also be used to *
* access the WebLogic Server console from a web *
* browser. *
D:\bea\wlserver6.1>"d:\bea\jdk131\bin\java" -hotspot -ms64m -mx64m -classpath
;.\lib\weblogic_sp.jar;.\lib\weblogic.jar" -Dweblogic.Domain=CLUSTER1 -Dbea.home
="d:\bea" -Dweblogic.management.password= -Dweblogic.ProductionModeEnabled=true
-Dweblogic.Name="CLUSTER3" -Dweblogic.management.server="http://10.0.1.103:7001"
"-Djava.security.policy==d:\bea\wlserver6.1/lib/weblogic.policy" weblogic.Serve
r
<20/11/2001 12:05:10> <Info> <Security> <Getting boot password from user.>
Enter password to boot WebLogic server:
Starting WebLogic Server ....
Connecting to http://10.0.1.103:7001...
The WebLogic Server did not start up properly.
Exception raised: weblogic.management.configuration.ConfigurationException: The
name of the managed server is same as admin server. The managed server will not
be allowed to start up.
weblogic.management.configuration.ConfigurationException: The name of the manage
d server is same as admin server. The managed server will not be allowed to star
t up.
at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:998)
at weblogic.management.Admin.initialize(Admin.java:320)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:359)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
D:\bea\wlserver6.1>goto finish
D:\bea\wlserver6.1>cd config\CLUSTER1
D:\bea\wlserver6.1\config\CLUSTER1>ENDLOCAL
D:\bea\wlserver6.1\config\CLUSTER1>
Many thanks in advance,
Alex Burton
http://www.e-plus.com.au/
Don't start the admin server as managed. Removing
-Dweblogic.management.server...
from the command line should help.
Alex Burton wrote:
> We have the following setup.
> CLLUSTER1 and CLUSTER2 are the servers to be in the cluster. CLUSTER3 is the cluster
> administrator. We start CLUSTER3 as a self-managed server and then try and start
> CLUSTER1 and CLUSTER3 as a managed server pointing at CLUSTER3. When we start
> 1 and 2 we get the following:
>
> D:\bea\wlserver6.1\config\CLUSTER1>startmanagedweblogic CLUSTER3 http://10.0.1.1
> 03:7001
>
> D:\bea\wlserver6.1>set PATH=.\bin;C:\WINNT\System32;d:\jdk1.3.1\bin
>
> D:\bea\wlserver6.1>set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
>
> D:\bea\wlserver6.1>echo off
>
> ***************************************************
> * To start WebLogic Server, use the password *
> * assigned to the system user. The system *
> * username and password must also be used to *
> * access the WebLogic Server console from a web *
> * browser. *
> ***************************************************
>
> D:\bea\wlserver6.1>"d:\bea\jdk131\bin\java" -hotspot -ms64m -mx64m -classpath
> ".
> ;.\lib\weblogic_sp.jar;.\lib\weblogic.jar" -Dweblogic.Domain=CLUSTER1 -Dbea.home
> ="d:\bea" -Dweblogic.management.password= -Dweblogic.ProductionModeEnabled=true
> -Dweblogic.Name="CLUSTER3" -Dweblogic.management.server="http://10.0.1.103:7001"
> "-Djava.security.policy==d:\bea\wlserver6.1/lib/weblogic.policy" weblogic.Serve
> r
> <20/11/2001 12:05:10> <Info> <Security> <Getting boot password from user.>
> Enter password to boot WebLogic server:
> Starting WebLogic Server ....
> Connecting to http://10.0.1.103:7001...
> ***************************************************************************
> The WebLogic Server did not start up properly.
> Exception raised: weblogic.management.configuration.ConfigurationException: The
> name of the managed server is same as admin server. The managed server will not
> be allowed to start up.
> weblogic.management.configuration.ConfigurationException: The name of the manage
> d server is same as admin server. The managed server will not be allowed to star
> t up.
> at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:998)
> at weblogic.management.Admin.initialize(Admin.java:320)
> at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:359)
> at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
> at weblogic.Server.main(Server.java:35)
> Reason: Fatal initialization exception
> ***************************************************************************
>
> D:\bea\wlserver6.1>goto finish
>
> D:\bea\wlserver6.1>cd config\CLUSTER1
>
> D:\bea\wlserver6.1\config\CLUSTER1>ENDLOCAL
>
> D:\bea\wlserver6.1\config\CLUSTER1>
>
> Many thanks in advance,
> Alex Burton
> http://www.e-plus.com.au/
-
I want to cache all files in my web server for JRE auto installation
Hi,
I have written an application for my customer. When they access my web server, they will auto-install jre 6.12 and then load my application using jnlp. All that is done, but i want to improve in the following ways:
1. I want to have more quiet installation of java. It should only show progress bar or just run in background. In the jre installation file (cab file), there is a file jinstall-6u12.inf, the last line is "run=%EXTRACT_DIR%\jinstall.exe /installurl=http://localhost/1.6.0_12-b04.xml /installmethod=plugin". What should I add to this line to make the installation more quiet?
2. When my client install jre, i want them to fetch all necessary files from my web server, so when java web site is down, i can still provide files they need to install java. I am aiming jre 6.12 only.
Thank you in advance.
WilliamOpen Macintosh HD > Applications > Utilitiies > AirPort Utility
Click on the Time Capsule icon
In AirPort Utility 6.x.....click Edit to the right of the Time Capsule
In AirPort Utility 5.x.....click Manual Setup
Click the Disks icon/tab at the top of the next window
Click Erase
The "Quick Erase" option will only take a few minutes, but it is not a secure Erase.
The "Zero Out" option will replace everything on the disk with zeros, and will likely take 4-6 hours for the process to complete, depending on the size of the drive.
The erase procedure will only affect the disk. It will not affect any of the network settings, passwords, etc that you have stored on the Time Capsule. -
ISSUES WHILE STARTING HTTP SERVER FOR A NEW INSTALLATION OF 10G AS
I installed 10g AS version 10.1.3.1. I am having this issue while running the installation:
The Configuration assistants are failing with the following error:
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=621769602,pid=30999)
failed to start a managed process after the maximum retry limit
Log:
/opt/dba/oracle/product/10.1.3.1/OracleAS_1/opmn/logs//HTTP_Server~1.log
Configuration assistant "Oracle Process Management and Notification Configuration Assistant" failed
I am using a staticports.ini file with the following values
Oracle HTTP Server port =81
Oracle HTTP Server Listen port = 81
Oracle HTTP Server SSL port = 444
Oracle HTTP Server Listen (SSL) port = 444
I am not sure what the following are for and what values i should for them so i commented them
#Oracle Notification Server Request port = port_num
#Oracle Notification Server Local port = port_num
#Oracle Notification Server Remote port = port_num
#ASG port = port_num
Has anyone encountered this issue ??Port numbers less than 1024 are privileged ports on Unix/Linux. In order for OHS to run on one of the privileged port (e.g. 81 and 441 in your case) you must enable OHS to run as root. By default OHS runs a non-root user, the user that installed Oracle Application Server.
So to start with installer do not specify custom (static) ports and complete the installation. OHS will be assigned some non-privileged port by installer. Post installation follow the instructions here to change the ports to 81 and 441:
http://download.oracle.com/docs/cd/B32110_01/core.1013/b32196/ports.htm#CIHJEEJH
Thanks
Shail -
Problem starting application server after intalling SAP NetWeaver 7.0 ABAP
Hi, guys
I installed SAP NetWeaver 7.0 ABAP on my laptop 3 days ago and it worked well.
But today, I encountered a problem when starting the application server with message "start operation timed out".
pls help me to solve the problem.
thanksFelipe, tudo bem?!
Este erro aparenta inconsistencia em algum pré-requisito, revise-os de acordo com o que é pedido no manual de instalação.
Abs. -
Problems with exporting display for oracle apps installation
Platform : RedHat Enterprise Server 4
I'm trying to do a 2 tier installation of Oracle Applications.
As part of the install, I need to generate a display that can be used by the applmgr user, but bellongs to another user.
When running the following command line, I get an error message.
xauth -f .Xauthority extract - $DISPLAY | rsh -l applmgr localhost /usr/X11R6/bin/xauth merge -
connect to address 127.0.0.1: Connection refused
Trying krb4 rsh...
connect to address 127.0.0.1: Connection refused
trying normal rsh (/usr/bin/rsh)
localhost: Connection refused
Does anyne have an idea? I've done some troubleshooting, but I can't figure out what is wrong.
I have added the following in the xmgr and applmgr's profiles
DISPLAY=localhost:13
export DISPLAY
The vnc server runs on display 13These are the scripts/files I'm using for installing Oracle Apps 11.5.10 on CentOS 4.2 (RedHat Clone) - hope it helps:
install.sh - adds necessary packages
yum install libaio
yum install openmotif
yum install gcc
yum install gcc-c++
mv /usr/bin/gcc /usr/bin/gcc344
mv /usr/bin/g++ /usr/bin/g++344
rpm -iUhv compat-gcc-7.3-2.96.126.i386.rpm
rpm -iUhv --nodeps compat-gcc-c++-7.3-2.96.126.i386.rpm
ln -sf /usr/bin/gcc296 /usr/bin/gcc
ln -sf /usr/bin/g++296 /usr/bin/g++
setup.env - Setup paths
# Oracle Setup Environment
ORACLE_SETUP_APPS=/setup/oracle/install/ebusiness/startCD
ORACLE_SETUP_PATCH=/data/setup/install/db
oracle.env - Installation environment
# Oracle Environment
ORACLE_BASE=/d01/oracle
ORACLE_HOME=$ORACLE_BASE/visdb/9.2.0
ORACLE_VAR=/var/opt/oracle
ORACLE_SID=VIS
ORACLE_TERM=xterm
# export TNS_ADMIN= Set if sqlnet.ora, tnsnames.ora, etc. are not in $ORACLE_HOME/network/admin
NLS_LANG=AMERICA_AMERICAN.UTF8
#ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
export ORACLE_BASE ORACLE_HOME ORACLE_SID ORACLE_TERM NLS_LANG ORA_NLS33
LD_ASSUME_KERNEL=2.4.19
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
export LD_ASSUME_KERNEL LD_LIBRARY_PATH
# Set shell search paths
export PATH=$PATH:/usr/sbin:/sbin:$ORACLE_HOME/bin
oracle - Kernel Parameters
kernel.shmall = 2097152
kernel.shmmax = 2147483648
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
setup_oracle_1.sh - Installation Step 1 : Add oracle user
#!/bin/sh
PATH=$PATH:/usr/sbin
groupadd dba # group of users to be granted with SYSDBA system privilege
groupadd oinstall # group owner of Oracle files
useradd -m -c "Oracle software owner" -g oinstall -G dba oracle -s /bin/bash
passwd oracle
setup_oracle_2.sh - Installation Step 2 : Prepare installation directory
#!/bin/sh
. ./oracle.env
BASE_DIR=/`echo $ORACLE_BASE | cut -d'/' -f2`
mkdir -p $ORACLE_BASE
chown -R oracle:oinstall /$BASE_DIR
chmod -R 775 $BASE_DIR
mkdir -p $ORACLE_VAR
chown oracle:dba $ORACLE_VAR
chmod 755 $ORACLE_VAR
setup_oracle_3_apps.sh - Installation Step 3 : Start installer
#!/bin/sh
. ./oracle.env
. ./setup.env
sysctl -p ./oracle
su oracle -c "export DISPLAY=:0.0 && $ORACLE_SETUP_APPS/Disk1/rapidwiz/rapidwiz"There are some steps afterwards, but with this I'll usually end up with a complete installation.
C. -
Tnsnames problem on RAC server for Different Host Names
Hi All,
We have RAC database setup and we are facing one issue on tnsnames.
My Hostfile has these entries:
127.0.0.1 loopback localhost
# Public Network
204.7.242.215 oradb1
204.7.242.217 oradb2
# Management network
174.19.1.151 oradb1_mgt
174.19.1.154 oradb2_mgt
# Rac VIP
204.7.242.216 oradb1-vip1
204.7.242.218 oradb2-vip2
# Rac HeartBeat
10.10.10.1 oradb1-priv1
10.10.10.2 oradb2-priv2
Where oradb1_mgt pointing to same host as oradb1 and oradb2_mgt>oradb2
Due to management issue, we need to use oradb1_mgt in place of oradb1 or oradb1-vip1 for standby database. So I've configured my Listener.ora as
LISTENER_ORADB1 =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradb1-vip1)(PORT = 1521)(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP)(HOST = oradb1)(PORT = 1521)(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP)(HOST = oradb1_mgt)(PORT = 1521)(IP = FIRST))
and Tnsnames.ora as
prd =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = oradb1_mgt)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = aixdb)
(INSTANCE_NAME = aixdb1)
But tnsping prd is giving error:
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.3.0 - Production on 07-JUN-2007 14:28:18
Copyright (c) 1997, 2006, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
TNS-03505: Failed to resolve name
What may be the solution for this. Its look like that, HOST = oradb1_mgt is creating problem as if I'm putting HOST = oradb1 or OST = oradb1-vip1, then its working.
Regards
RakeshI have signed applets but not with jmf. Your best bet is to put the applet in a jar and sign the jar. Most java runtimes with a self signed applet will prompt the user and ask the user if they want to grant permission. You probably have to use the java html converter to code your html to force the use of suns plugin. I am not sure if you have to sign the jmf jars or they may already be signed.
-
Problem-Starting InDesign Server for use with CORBA / Java and IOR file not generated
I'm trying to start Indesign Server cs3 for use with Corba, as per the document the server should generate the start-up message like this..
InDesignServer -iorfile c:\ior.txt -pluginpath Server\Corba
[server] Writing IOR to ... and it should generate the IOR file
but I'm getting the usual start-up message and the IOR file is not generated, I hope IOR file is required for Java component interaction with IDS, kindly help me to solve this.
Thanks in advance.[From Susan Doan, who is having trouble posting to the forum today}:
It looks like the example command line in the "Intro to InDesign Server" pdf is using curly quotes instead of straight quotes. If you copy the command from the pdf and paste it in your command shell, it won't work because of the curly quotes.
You can run the command without the quotes as Rich has said, but, as will all command lines, if your path contains a space, you will need to put quotes (straight ones!) around the path.
Thanks,
Ole
Maybe you are looking for
-
0ENTRY_DATE not displayed in the Cube
Hi All, Please help me out its urgent, I'm having a field(0entry_date) in the transfer structure and also in the communication structure of the infosource, but the field is not being displayed in the Cube and also in the Update rules.The
-
How to store data in hashmap so that it can be used by different methods.
Hello, I have an ADF/JSF application and the database is DRM. The program gets data from DRM into this hashmap. Program needs this data frequently. Getting this HashMap is very resource intensive due to a lot of data it has. I want to get the data in
-
Stateless ejb doesn't insert row
Hi When I generate stateless jsp pages for AM deployed on 8i ejb, it cannot insert a new record. However if I make statefull pages - everything is fine. Also it works in tester. Also with Local deployment both types of jsp generation (statefull and s
-
DVD Playback Artifacts (mini with 50" plasma)
Mac mini hooked up to 50" panasonic plasma using dvi/hdmi cable. When in front row or using as a "computer" the display looks great. (1920x1080) If I play a DVD or playback a movie that I used mactheripper to store on an external drive (using front r
-
Xserver-1.5.3 doesn't reset resolution after ending a full screen game
xserver-1.5.3 doesn't reset display resolution after ending a full screen game. Is this a issue of the new xserver or the ati driver (i switched from catalyst to xf86-video-ati)? And how can i solve it? so long ukognos Last edited by ukognos (2008-11