Problem in dynamic file name in File reciever adapater

I have given my file name as
%abc%.txt
and in the advanced mode
i have given
Additional parameters as
abc=
payload:file_reciever_mt,1,FileNameNode,1,FileName,1
while my file reciver structure is
<?xml version="1.0" encoding="UTF-8"?>
<ns:file_receiver_mt xmlns:ns="urn:filetofiledemo"><recordset><data><name></name><age></age></data></recordset><FileNameNode><FileName>Amit123</FileName></FileNameNode></ns:file_receiver_mt>
My file is getting store as %abc%.txt
not as Amit123.txt
I am using SP 14 .
Any pointers wld be very helpful
Thanks
Amit

Hi Amit,
In your filename field. just give a variable with % symbols. (eg: %file% ).
Now, under the option Variable Name Substitution, you can give how the value has to be created.
It can be your interface name, sender service name, etc or it can be some value dynamically from your payload.
For the former, your give
message:interface_name ,etc
and for the payload part you give,
Payload: "your element root which u wanna acecss"
Just check this link out,
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
And read the contents under variable substitution and it will help you understand the concepts better.
Apart from my previous post, you can also use Adapter Specific Identifiers in your Sender and Receiver File Adapters to copy the same file name from the source to the target.
take a look at this blog for the same,
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
-- Bhavesh
cheers,
Prashanth

Similar Messages

Xml file in dynamic file name in file receiver adapter

Hi,
I'm doing the dynamic file name in file receiver adapter. I have done as per instructed in /people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
All turned out okay. I have got the file name I require. Except that the file format is XML and I need to suppress the filename node occupied by the dynamic file name.
The content conversion mentioned in /people/sravya.talanki2/blog/2005/08/11/solution-to-the-problem-encountered-using-variable-substitution-with-xi-sp12, does not seem to solve my problem. As it is only for file format other than the XML one, because we only do the content conversion if we want to "convert" the format of the content from XML to the other format.
Does anybody have the solution to my problem? thanks in advance

Thank you Raj for the direction
The way to do it is :
1. In ID, advanced tab, put a check on the adapter-specific message attributes - file name.
2. Put a "*" on the file name scheme
3. In IR, create a UDF to set up target file name :
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
// set up file name for receiver adapter
String SourceFileName = conf.get(key);
conf.put(key, TargetFileName);
return " ";
4. Map the above UDF to the header level of the target structure.
Regards,
Idi

Dynamic File name in File Adapter

Hi,
I have a requirement to pass dynamic file name in File Adapter.
Is there any way to pass a variable for the file name attribut in file adapter.
I am looking for some options apart from %yyMMddHHmmss%,%SEQ%...etc
Please suggest if any of you have information on how to put values from a variable to file name attribute in file adapter
regards
Saiju

Hi Saiju,
Yes there is.
Assign your file name to a variable, let's say 'fileName'.
Now go to your invoke activity(for the specific fileadapter) -> Property tab-> find a property call jca.file.FileName -> in the value field assign 'fileName' variable.
That's it... (assuming you are using 11g)
Arik
Edited by: Arik on Jun 27, 2012 3:12 PM

Custom File Name-Original File Number doesn't work. Why?

I want to export and rename some files with the "Custom File Name-Original File Number" option. Yet this doesn't seem to work, and I wondered what I might be doing wrong. The filename will only rename as the custom text.
The sample file name shown underneath has a dash after the custom text bit, but then the extension only eg Newname-.tif
I am now using LR 4.2 but I seem to remember doing this renaming OK with an earlier version (though I can't remember which). This suggest that either there is a problem with this specific version or that I have something set differently to the way I had it initially. I am hoping the latter is the case. Any suggestions as to how to fix this would be welcome!

I am sorry to report that i don't know how to create a screenshot. However, what I am getting, exact;ly is this:
From Library grid view: F2 or Library>Rename Photo
Then little screen appears with heading Rename Photo:
File Naming> set to Custom Name - Original File Number
Custom Text> NewFilenameHere
Example: NewFilenameHere-.tif
Clicking on OK changes the filename to just the custom text without the original file number. Original File name shows in metadata eg DSC01129-Edit.tif
The only way i seem to be able to get the original file number with the custom text is to include it manually as part of the custom text.

FILE NAME WITH FILE EXTENTIONS

HI EXPERTS!!
I WANT TO GET THE FULL FILE NAME STRORED IN THE SERVER FOLDER. I USED FM RZL_READ_DIR_LOCAL BUT I AM GETTING ONLY 32 DIGITS OF NAME NOT FULL NAME AND ALSO SIZE PARAMETER IS CONCATENATING WITH NAME.
I WANT THE FILE NAME WITH FILE EXTENTIONS(TXT. .PDF ETC)..
PLZ SUGGEST ME HOW TO GET THE SAME..
PLZ REPLYE ME..
MAHESH

Hi Mahesh,
Try the below FM in the below code.
DATA:
    LV_PERMISSION(10),                 " Permission
    LV_H2,                             " H2
    LV_FLNM(13),                       " File name
    LV_USER(10),                       " User
    LV_GROUP(10),                      " Group
    LV_SIZE(15),                       " Size
    LV_MONTH(3),                       " Month
    LV_DAY_C(2),                       " Day
    LV_YEAR(5),                        " Year
    LV_FILE_NAME       TYPE FILE_NAME, " Filename
    LV_JUNK,                           " Junk
    RETURN_CODE      TYPE I.           " Return code
DATA:
    CMD_PARAMS LIKE SXPGCOLIST-PARAMETERS,
                                       " External prg.parameters
    CMD_OUTPUT TYPE BTCXPM OCCURS 0,   " Log message
    STATUS TYPE EXTCMDEXEX-STATUS.     " Status
CONSTANTS:
    LC_DIR TYPE C VALUE 'd'.           " Directory
FIELD-SYMBOLS: <CMD_OUTPUT_LINE> LIKE LINE OF CMD_OUTPUT.
CMD_PARAMS = PV_DIRECTORY.
CLEAR CMD_OUTPUT.
CALL FUNCTION 'SXPG_CALL_SYSTEM'
       EXPORTING
            COMMANDNAME                = 'Y_LS_LN'
            ADDITIONAL_PARAMETERS      = CMD_PARAMS
       IMPORTING
            STATUS                     = STATUS
            EXITCODE                   = RETURN_CODE
       TABLES
            EXEC_PROTOCOL              = CMD_OUTPUT
       EXCEPTIONS
            NO_PERMISSION              = 1
            COMMAND_NOT_FOUND          = 2
            PARAMETERS_TOO_LONG        = 3
            SECURITY_RISK              = 4
            WRONG_CHECK_CALL_INTERFACE = 5
            PROGRAM_START_ERROR        = 6
            PROGRAM_TERMINATION_ERROR = 7
            X_ERROR                    = 8
            PARAMETER_EXPECTED         = 9
            TOO_MANY_PARAMETERS        = 10
            ILLEGAL_COMMAND            = 11
            OTHERS                     = 12.
Check Status first then check sy-subrc
CASE SY-SUBRC.
    WHEN 0.
      CASE STATUS.
        WHEN 'F'.
          MESSAGE I057(YS) WITH 'SXPG_CALL_SYSTEM'(002).
          GF_EXIT = GC_TRUE.
        WHEN 'E'.
          MESSAGE I058(YS) WITH 'SXPG_CALL_SYSTEM'(002).
          GF_EXIT = GC_TRUE.
        WHEN 'S'.
          MESSAGE I059(YS) WITH 'SXPG_CALL_SYSTEM'(002).
          GF_EXIT = GC_TRUE.
        WHEN 'C'.
          MESSAGE I061(YS) WITH 'SXPG_CALL_SYSTEM'(002).
          GF_EXIT = GC_TRUE.
      ENDCASE.                         " CASE STATUS.
    WHEN 1.
      MESSAGE I048(YS) WITH 'SXPG_CALL_SYSTEM'(002).
      GF_EXIT = GC_TRUE.
    WHEN 2.
      MESSAGE I049(YS) WITH 'Y_LS_LN'(003).
      GF_EXIT = GC_TRUE.
    WHEN 3.
      MESSAGE I050(YS) WITH 'SXPG_CALL_SYSTEM'(002).
      GF_EXIT = GC_TRUE.
    WHEN 9.
      MESSAGE I054(YS) WITH 'SXPG_CALL_SYSTEM'(002).
      GF_EXIT = GC_TRUE.
    WHEN 10.
      MESSAGE I055(YS) WITH 'SXPG_CALL_SYSTEM'.
      GF_EXIT = GC_TRUE.
    WHEN 11.
      MESSAGE I056(YS) WITH 'SXPG_CALL_SYSTEM'(002).
      GF_EXIT = GC_TRUE.
    WHEN OTHERS.
      MESSAGE I022(YS) WITH SY-SUBRC.
      GF_EXIT = GC_TRUE.
ENDCASE.                             " CASE SY-SUBRC.
IF GF_EXIT = ' '.
    READ TABLE CMD_OUTPUT ASSIGNING <CMD_OUTPUT_LINE> INDEX 1.
    IF SY-SUBRC = 0.
      CONDENSE <CMD_OUTPUT_LINE>-MESSAGE.
      IF <CMD_OUTPUT_LINE>-MESSAGE CS 'total' OR
         <CMD_OUTPUT_LINE>-MESSAGE CS 'TOTAL'.
        DELETE CMD_OUTPUT INDEX 1.
      ENDIF.
    ENDIF.
    LOOP AT CMD_OUTPUT ASSIGNING <CMD_OUTPUT_LINE>.
      CONDENSE <CMD_OUTPUT_LINE>-MESSAGE.
      SPLIT <CMD_OUTPUT_LINE>-MESSAGE AT SPACE INTO
                                      LV_PERMISSION
                                      LV_H2
                                      LV_USER
                                      LV_GROUP
                                      LV_SIZE
                                      LV_MONTH
                                      LV_DAY_C
                                      LV_YEAR
                                      LV_FILE_NAME
                                      LV_JUNK.
      IF LV_PERMISSION(1) = LC_DIR.
        CONTINUE.
      ELSE.
        LV_FLNM = LV_FILE_NAME(13).
        TRANSLATE LV_FLNM TO UPPER CASE.
        IF LV_FLNM = '1W_FIARFUNNEL'.
          PT_FILE-FILE_NAME = LV_FILE_NAME.
          APPEND PT_FILE.
        ENDIF.                         " IF LV_FLNM = '1D_FIARFUNNEL'.
      ENDIF.                           " IF lv_permission(1) = ...
    ENDLOOP.                           " LOOP AT CMD_OUTPUT
ENDIF.                               " IF GF_EXIT = ' '.

File Name and File Content not gettinng passed from Proxy to Business Serv

Hi All ,
I have a requirement in OSB , where i need to pick the file from remote Source and FTP the files to Remote Target .Below are the steps which i did to achieve this.
1.Created a FTP Adapter in JDeveloper to Get the files from Source and a FTP Adpater to Put the files to Target.Inboth the adapters i have choose 'Shema is Opaque'
2.Imported the wsdl and jca file to OSB
3.Generated Proxy Service (PS ) and Business service (BS) out of Step 2
4.I edited the Message flow such a way that , the PS is routed to invoke the BS
Aslo i assigned $inbound/ctx:transport/ctx:request/tp:headers/jca:jca.file.FileName to a variable 'FileName' in PS
and in BS service i passed $outbound/ctx:transport/ctx:request/tp:headers/jca:jca.ftp.FileName = 'FileName'
When i tried to activate my session , the file that is getting written to the target has 0 byte.Also , the file name is also not getting passed from PS to BS
Can some one help me with the steps on how to use the Xpath , so as to pass the file name and file body from proxy servive to business service.
Thanks
John

I search multiple shares to find a common file name then create a single output file. I will be doing this search and file creation
for 5-10 different file names. If there is a better way .. certainly open for suggestions. It's working but having issue with
the cmd file for every file and folder I check. It puts this error out for each run of the process.
Error message in LOG file:
Get-ChildItem : Cannot find path 'F:\powershell\-SearchFor' because it does not exist.
Thanks.
I tried your code with little changes and saved in Temp folder.
My CMD file has the below code
PowerShell C:\Temp\Untitled1.ps1
It worked.
Regards Chen V [MCTS SharePoint 2010]

When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files. Even if I perform a "save as" to the correct file name the file format is still not recognized. Why is this happening!?

When I send out mail from MS Outlook enterprise account in the office to my Mac at home they are received as "winmail.dat" files. Even if I perform a "save as" to the correct file name the file format is still not recognized. Why is this happening!?

http://www.joshjacob.com/mac-development/tnef.php

Passing the file name and file type for mime_download

HI All,
Can You Please let me know how to pass the parameters file name and file type for mime_download.
Thanks in Advance.
Regards,
Haritha.

Hello Haritha,
Please see the SAP help:
http://help.sap.com/saphelp_nw70/helpdata/en/46/9bd97240b81e5be10000000a1553f6/frameset.htm
Edgar

Make "File name" and "Files of type" fields read-only in JFileChooser

I try to make the "File name" and "Files of type" fields read-only in JFileChooser dialog. Anybody
knows how to do? Thanks.

You mean so the user can't choose the name of the file to open or save? Not much point in even using a JFileChooser, then, is there? Or did I misunderstand the question?

How should we get the out put file-name same as in put file-name in file to

Hi frnds,
having hundreds of files in the sender system with different names, how should we get the out put file-name in the receiver system same as the in put file-name in file to file scenario ?
Thanks in advance.
truly,
snrvakiti.

Hi,
In Receiver File Adapter you can set under 'Adapter-Specific Message Properties'
check Use Adapter-Specific Message Properties
check Fail on Missing Adapter Message Properties
Check File Name
Have a look at this link, [File_to_File|http://allsapnetweavernotes.blogspot.com/2008/09/how-can-i-access-filename-from-fileftp.html]
Regards,
P.Rajesh

"The file [name of file] may have been changed by another user since you last saved it." Issue affects both network and local files.

When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it." She can choose to save as another file or overwrite with her changes.
This just started happening a week or so ago. She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message. It happens on
most files, but not all – both network and local.
We already tried the QFE_Saskatchewan registry fix. I also checked the file server for Services for Macintosh.

You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
2626998 Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
http://support.microsoft.com/kb/2626998
For Excel 2010, follow these steps:
a. Click Start , click Run , type regedit in the Open box, and then click OK .
b. Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
c. On the Edit menu, point to New , and then click Dword Value .
d. Type NetworkAvailableTimeInSeconds , and then press Enter.
e. Right-click NetworkAvailableTimeInSeconds , and then click Modify .
f. In the Value data box, click Decimal , type a number value, and then click OK .
Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
determine an appropriate value. You may have to try multiple numbers.
g. Locate and then select the following registry subkey.
HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
h. Repeat step 2C through step 2F again. Reuse the same value that you used previously.
i. Exit Registry Editor.
Feel free to post back. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

FileSaveService ignored the file name and file extensions

I am using the JNLP API to build a JWS application. When using the FileSaveService, I found it automaticlly ignored the file name and file extensions I passed to the 'FileSaveService.saveFileDialog()'.
My code is like the following:
String[] xtns = {"csv"};
FileContents fileContents = fileSaveService.saveFileDialog(
".", xtns, stream, "testFile"); Im running this application in JRE version 1.6.0_20-b02 in Windows XP.
Although in the JNLP API, it said the file name and file extension 'might be ignored by the JNLP client', I still wonder if anyone has a better solution for this?
Thanks very much :)

Sean.Wang wrote:
..I still wonder if anyone has a better solution for this?Visit [http://pscode.org/jws/api.html#fs]. Click the link to the 'Launch File Service (sandboxed) demo'. Type some characters into the text area then activate the 'Save File' button. Do you get a file chooser that defaults to (.zzz) extension?
Then if yes, and that is a 'better solution' for you, then yes, I have one. The code of the demo. can be downloaded at a link just to the right of the launch link.

Hoe to logical file name using "FILE" transcation

I want to create a logical file name using "FILE" transaction , i have file path '/xfer/OUT/IDD0230 ' that cureently hard coded in program but i want to avoid hard code .

You need to go to FILE transction, create new entry.
You need to specify Physical name i.e value hardcoded in your program
and corresponding new Logical Path which enduser will be entering.
In code u ned to decode Logical path to physical path as its actual path.
Award points if helpful.
Shital

Why does the file Name for file attached with Annotations "Attach File" (paperclip) become Unknown when Comments are Published?

Our company recently purchased Adobe Acrobat Pro XI for the purpose of using it for shared electronic reviews. We are using Send for Shared Review created in Adobe Acrobat Pro XI, and all the Comment tools work as expectedexcept the paperclip in Annotations.
When a Word or Excel or Image(png,jpeg) file is attached using the Annotations paperclip, the initiator can initially see and open it. But after Publish Comments is selected and the review file is closed, the file "Name" changes to "Unknown" (although the Description has the correct file name and extension). The Modified information is Unknown, as is the Size and Compressed Size.
When the review file is then re-opened, even the initiator cannot open the file, although:
The file location is marked with the paperclip within the document.
The file name is shown in the Comments List with the initiator's name.
In the Attachments list (the paperclip beneath the Thumbnails and Bookmarks) the Name appears as Unknown, Description shows the file name, Modified is Unknown, Size is Unknown, and Compressed Size is Unknown.
The file Name cannot be edited, although the file Description can be.
We have followed the procedure described in the tutorials but cannot figure out how to troubleshoot this situation. Since this feature was the reason for the purchase of Adobe Acrobat Pro IX, we would any help. Please don't leave out any basics since we are all new users.
We have several people with Adobe Acrobat Pro XI and the rest have Adobe Reader XI and it is a Windows platform. Can someone please give us some advice how to get this feature to work as described?

FYI Rave,
There are some other forum entries with this exact same issue...:
Cannot Open Attachments in PDF
Why does the file Name for file attached with Annotations "Attach File" (paperclip) become Unknown when Comments are Published?
Can someone help us get the COMMENTS ATTACHMENT TOOL to work as described in Acrobat Pro XI?

When I open the "Save Page As" window, the drop-down box for the file name shows files that were saved long ago. This is not cleared by any "clear history" function that I can find. How do I clear this?

# Question
When I open the "Save Page As" window, the drop-down box for the file name shows files that were saved long ago. This is not cleared by any "clear history" function that I can find. How do I clear this?

Hello.
I believe this is a Windows related issue, since it's the windows Save File manager we're talking about here (right?). You should contact Microsoft for help on that one, I believe. You'd expect to be able to delete the entries by simply tapping ''Delete'' on your keyboard when they are focused (that's how it goes for deleting specific form autocomplete entries in Firefox), but I haven't tried that.
I'm sorry I can't be of more help.

Problem in dynamic file name in File reciever adapater

Similar Messages

Maybe you are looking for