Problem in dynamic selection screen

Hi,
I have a parameter P1 on the selection screen.When i am entering some value in that field some more field should be displayed below it on the selection screen.For ex. when i am entering 1 P2,P3,P4 should come.Whe i am entering 2 P3,P4,P5 should come.I also need a validation that the user cannot execute without pressing enter after entering the value in P1.
Mukesh Kumar

Hi,
Check this out.
SELECTION-SCREEN : BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETER : p1 type < > USER-COMMAND change,
PARAMETER : p2 type < > MODIF ID m3,
p3 type < > MODIF ID m3,
p4 type < > MODIF ID m3,
p5 type < > MODIF ID m4,
p6 type < > MODIF ID m4.
SELECTION-SCREEN:END OF BLOCK blk2.
AT SELECTION-SCREEN OUTPUT.
check p1 is not initial.
LOOP AT SCREEN.
if p1 = '1'.
    IF screen-group1 = 'M3'.
        screen-INPUT = 1.
      ELSE.
        screen-INPUT = 0.
        screen-invisible = 1.
      ENDIF.
endif.
if p1 = '2'.
    IF screen-group1 = 'M4'.
        screen-INPUT = 1.
      ELSE.
        screen-INPUT = 0.
        screen-invisible = 1.
      ENDIF.
endif.
      MODIFY SCREEN.
ENDLOOP.
For validation for pressing enter, check sy-ucomm.
Reward if helpful.
Regards,
Ramya

Similar Messages

Problems creating dynamic selection screen

Hi all,
i'm trying to dynamically generate a selection screen and show it as subscreen using the two function modules FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG. I call the function modules in the PBO of the therefor defined subscreen. The FREE_SELECTIONS_DIALOG fm has the two import parameter "as_subscreen" and "as_window". If i use the "as_window" parameter the selection screen comes up as popup. If i use the "as_subscreen" parameter, i can't see anything in my defined subscreen.
Any suggestions ?
Thanks in Advance
Dirk

Hi,
The above requirement is not possible without using logical database.
The reason is that the compiler identifies the below syntax only inside a LDB program .
SELECTION-SCREEN DYNAMIC SELECTIONS
                 FOR {NODE|TABLE} node [ID id].
The above syntax creates a subscreen container on the standard selection screen of the program during generation
and we are able to view the dynamic selections icon on the selection screen.
Hence it is not possible to use the FM 'FREE_SELECTIONS_DIALOG' as a subscreen without using a
logical database of the relevant table.
However if you dont want to create a new LDB for each table, there is a trick which needs to be performed
once in your SAP system and all custom programs can use this FM to create a dynamic selection screen
as a subscreen of the standard selection screen.
The prerequisite steps are as follows:
1: Create a dummy / test database table in SE11 with a single field i.e. for example mandt , matnr
2: Create a new logical database program for this table in SE36. Save and activate.
This will create dynamic selections for the fields of the table created in step 1.
Steps to be followed in the required custom ABAP program to create the dynamic selection screen as a subscreen.
A: Include the LDB program created in step 2, in the attributes of the custom ABAP program.
Now when you execute the program, you can see the dynamic selection icon for the dummy table created in step 1.
B: In your custom program we need to suppress the icon for 'Dynamic Selections' from the standard selection screen.
   We need to perform this action, because the 'Dynamic Selections' icon always triggers a call to the
   dynamic selection screen of the included LDB progam. ( In our case a dummy table created in step 1 ).
   Whereas we want to trigger a call of the dynamic selection screen of our desired table.
   Logic is as follows:
   In 'AT SELECTION-SCREEN OUTPUT' event call the FM RS_SET_SELSCREEN_STATUS to exclude the fcode 'DYNS'.
C: Add a pushbutton / checkbox on your selection screen to trigger a call to the FM 'FREE_SELECTIONS_INIT' &
   'FREE_SELECTIONS_DIALOG' in the 'AT SELECTION-SCREEN' event.
D: When the user clicks the pushbutton / checkbox for dynamic selections call the above 2 FM for the desired table
    with the AS_SUBSCREEN flag of FREE_SELECTIONS_DIALOG = 'X'
Result: Your dynamic selections screen will be created as a subscreen of the standard selection screen and not as a pop-up.
Advantage: With the creation of the single custom table & LDB, you are now able to create dynamic selections as subscreen
in any program in the system. All we need to do is follow the steps A, B & C in each program.
Note: Your other restrictions with dynamic selection screen ie. submit in background , save as variant still remain and
you need to handle them accordingly.
let me know if you need sample code.
Regards,
Bhawit Kumar

Problem with Dynamic Selection Screen

Hi ppl,
I have this part of code in my program. But it is not working as desired. Please could somebody let me know what is wrong with it.
TYPES: BEGIN OF tp_selscr,
         klart TYPE klah-klart,
         class TYPE klah-class,
       END OF tp_selscr.
DATA: wa_selscr TYPE tp_selscr.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK cls WITH FRAME TITLE text-s01.
PARAMETERS:     p_cls AS CHECKBOX USER-COMMAND chk.
SELECT-OPTIONS: s_klart FOR wa_selscr-klart MODIF ID cls,    "Class type
                    s_class FOR wa_selscr-class MODIF ID cls
                        MATCHCODE OBJECT clas.
SELECTION-SCREEN END OF BLOCK cls.
AT SELECTION-SCREEN.
*AT SELECTION-SCREEN ON p_cls.
PERFORM dynamic_sel. "Selection based on class
*&      Form dynamic_sel
*       Selection based on class option
FORM dynamic_sel.
IF p_cls EQ 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'CLS'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF screen-group1 = 'CLS'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    " dynamic_sel
Regards.

The event is wrong. It should be AT SELECTON SCREEN OUTPUT
TYPES: BEGIN OF tp_selscr,
         klart TYPE klah-klart,
         class TYPE klah-class,
       END OF tp_selscr.
DATA: wa_selscr TYPE tp_selscr.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK cls WITH FRAME TITLE text-s01.
PARAMETERS:     p_cls AS CHECKBOX USER-COMMAND chk.
SELECT-OPTIONS: s_klart FOR wa_selscr-klart MODIF ID cls,    "Class type
                 s_class FOR wa_selscr-class MODIF ID cls
                        MATCHCODE OBJECT clas.
SELECTION-SCREEN END OF BLOCK cls.
AT SELECTION-SCREEN OUTPUT.       """ Instead of AT SELECTION SCREEN
*AT SELECTION-SCREEN ON p_cls.
PERFORM dynamic_sel. "Selection based on class
*&      Form dynamic_sel
*       Selection based on class option
FORM dynamic_sel.
IF p_cls EQ 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'CLS'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSE.
    LOOP AT SCREEN.
      IF screen-group1 = 'CLS'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.
Vikranth

How to retrieve values from Dynamic Selection screen while using LDB - PSJ

I am having problem in PSJ Logical database. In a custom report which is using PSJ LDB, we are using PROJ and PRPS_R tables.
When I run program it displays one dynamic selection screen, there we are giving selection criteria for PRPS (Master data WBS element) - Created on (giving some range like 2011/01/01 to 2011/01/31).
So I want to display all WBS element which are created during the period (2011/01/01 - 2011/01/31).
How do I retrieve the select-option low and high value of the field Created on Of WBS element if we Select data from any table based on this condition.
Please help me.
Thanks.

in fact you don't have to get the values, you only need to tell to the program to take them into account :
GET PRPS.
CHECK SELECT-OPTIONS.

Passing values to a dynamic selection screen via a report

Hi,
I have the following problem and need to seek your expertise urgently.
In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
Appreciate any help given.
Thanks,
CK

Hello CK,
Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program.

Specific criteria in dynamic selection screen.

Hi experts.
I have a requirement to build dynamic selection screen fields. For these I would like to use FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG function modules.
The problem is that all fields could be single field or as a range... Is there any chance to make specific fields (DATS) as a single field and others as a range ?
Thanks a lot.
Daniel.

yes
you need to pass fields in parameter FIELDS_TAB of function FREE_SELECTIONS_DIALOG
in this structure you have the field type P or S

Dynamic Selection Screen In Transaction

Hi all,
My first post here, and i got a good problem.
I try to create a specific transaction , At the top: I got a LISTBOX with a pushbutton.
When you select datas into the listbox, i wish to create a dynamic selection screen dependant on the selected data, below the listbox. Does it clear?
And i have no idea how to proceed.
Thanks for answers
Message was edited by:
Gunther OLTRA

Thanks Karthik ,
But it's not helpfull.
The dynamic selection screen must be created from a transparent table.
I draw you a schematic:
I select data in the listbox, with this Key, i will select datas in the transparent table and create the dynamic selection-screen below the listbox.
It's not a report, it's a transaction.
I know how to create dynamic SS, but i don't know how to display it (subscreen? Custom control?)

How to generate dynamic selection-screen?

Hi all,
I have two radio buttons on selection-screen.
If user-selects the one, Then under the radio button another parameter should be displayed
if he selects another radio button, the previous parameter should not be displayed and another parameter should appear in the selection screen under the second radio button.
Please help by giving the code to solve this problem?
Thanks,
Vamshi.

Hi Vamsi,
By using AT SELECTION-SCREEN OUTPUT and creating the MOdif id for the selection screen parameter you can achieve the dynamic selection scree..
AT SELECTION-SCREEN OUTPUT.
* Modify selection screen as per the radio buttons selected.
PERFORM modify_sel-screen.
FORM modify_sel-screen .
* If radio button - process in range of STR's selected, display STR
* range and Date range as input
IF p_rb1 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir2.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
* If radio button - process from excel is selected, give option for
* user to upload file
ELSEIF p_rb2 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir1.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    " MODIFY_SEL-SCREEN
see the below example....
copy the below code you can come to know how the dynamic selection screen happens..
*                   S E L E C T I O N S C R E E N                     *
* Selection criteria
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_rb1 RADIOBUTTON GROUP gr1 USER-COMMAND com1 DEFAULT 'X',
                                         "Process STR's in date range
           p_rb2 RADIOBUTTON GROUP gr1. "Process STR's from Excel
SELECTION-SCREEN BEGIN OF BLOCK c1 WITH FRAME .
PARAMETERS : p_apover TYPE zcpeg_fg_related-pl_version OBLIGATORY.
                                                            "PJ1031008
SELECTION-SCREEN END OF BLOCK c1.
SELECTION-SCREEN END OF BLOCK b1.
* Display date range to process STR's
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
SELECT-OPTIONS: s_banfn FOR w_preq MODIF ID ir1,
                                    "Purchase requisition number
                s_lfdat FOR w_lfdat MODIF ID ir1.
"Date range
SELECTION-SCREEN END OF BLOCK b2.
* Option for uploading file to process STR's
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_file TYPE rlgrap-filename MODIF ID ir2. "File name
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN OUTPUT.
* Modify selection screen as per the radio buttons selected.
PERFORM modify_sel-screen.
FORM modify_sel-screen .
* If radio button - process in range of STR's selected, display STR
* range and Date range as input
IF p_rb1 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir2.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
* If radio button - process from excel is selected, give option for
* user to upload file
ELSEIF p_rb2 EQ c_x.
    LOOP AT SCREEN.
      IF screen-group1 = c_ir1.
        screen-active = c_0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    " MODIFY_SEL-SCREEN
Regards,
Prabhudas

DYNAMIC SELECTION SCREEN uisng FREE_SELECTIONS_INIT

Hi,
I am facing a problem regarding the dynamic selection screen using FREE_SELECTIONS_INIT and FREE_SELECTIONS_DIALOG .After entering the values in Dynamic Selections on pressing Enter, the values are getting distorted.For example if i gave the purchase order no as 0099994434 it is getting truncated to four digits no like 0099.
Its a bit urgent .Can any body help me out in resolving this isuue.

Hi,
You may refer this http://help.sap.com/saphelp_47x200/helpdata/en/9f/db996135c111d1829f0000e829fbfe/frameset.htm
Raja T
Message was edited by:
Raja T

Dynamic selection screen fetching the value from table fields

hi gurus,
i have one table say ztable...and i should create a dynamic selection screen which should populate the selection screen by the table field names.
example..if i have 3 fields im my table..my selection screen should have three selection option fields..and in future if i add one more field in my table it should automatically create another slection-option in selection screen..
thanks
Sudheer

Do you mean like SE16 works. If so, you should notice that if you amend the selection fields, the screen program is actually re-generated.
That is what is happening. A program is being created and re-generated.
To create a dynamic selection screen in a single program is not possible ( I may be wrong ). If it is possible, then you would have problems in defining selection screen field names and using them.

How to deal with dynamic selection screen elements when macros are used?

Hello experts,
This is regarding the dynamic selection screen elements. Actually the requirement is to modify the existing standard report program RFUMSV00 by copying it into a Z report, adding a few selection screen elements and new fields in the output. I actually did everything required except for the one thing that is going out of my reach.
There are a certain fields which are coming when they are not supposed to get displayed. I don't understand the code because of its obsoleteness. Neither can I debug it because it is just data declaration.
This is the code where there is a fault. If I copy the entire code into a new Z report, I'm getting new fields like Entry Date, Document Type, Reference Transaction, Reference key, Logical system.
DEFINE selection_screen_line.
selection-screen: begin of line.
parameters &3 like &4 default 'X' modif id mc4.
selection-screen: comment (30) &1 for field &3 modif id mc4.
selection-screen: comment pos_low(10) text-019
                    for field &2 modif id mc4. "neu
parameters &2 like rfums_alv-variante modif id mc4.
selection-screen:
      position pos_high.
selection-screen: pushbutton (15) text-028
                    user-command &5 modif id mc4.
selection-screen end of line.
END-OF-DEFINITION.
Kindly, suggest me the right solution.

In the program attributes ( SE38 > RFUMSV00 > GOTO > Properties ), you will find a logical database BRF declared. The include DBBRFSEL is part of the selection screen of this logical database.
The selection screen is actually the selection screen of this logical database.
Under the Logical Database field, there is a Selection screen field where you can input which selection screen of the logical database to be used.
But, this is just to change the selection screen that is displayed. To completely suppress it you need to remove logical database declaration from the properties of the program and call it inside your program through function module.
You cannot just remove it from the declaration because many of its variables are used in the program.
So call it using function module as the first step in INITIALIZATION section of the program.
The syntax and function module to call it in your program can be found in the following thread :
How to hide the selection screen of a Logical datebase?
Regards,
Ashish

How to add a new Field in the Dynamic Selection screen section.

HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant Prabhu

Hi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico

Exclude one field from Logical Database's dynamic selection screen

Hi Guru,
I have a requirement to amend a program to exclude the document number field (bsik-belnr) from the dynamic selection-screen of the logical database KDF(Vendor Database) so that the program will not filter according to the document number.
I have use the below syntax in my zprogram.
selection-screen exclude select-options: doc-no.
However I get syntax error "The addition EXCLUDE is only allowed in INCLUDE DBKDFSEL".
Please advice.
Best Regards,
Fung

The selection part of the logical database defines input fields for selecting data.
          The runtime environment displays these on the selection screen when you run an executable program linked to the logical database.
          Include called DB<ldbname>SEL.
        SELECTION-SCREEN BEGIN OF VERSION ver TEXT-xxx.
                                                                SELECTION-SCREEN EXCLUDE ... .
                                                SELECTION-SCREEN END OF VERSION ver.
Defines a selection screen version (with a three-character name ver ). Between BEGIN OF VERSION and END OF VERSION , you can exclude selection screen objects for the version ver , i.e. remove them from the selection screen with SELECTION-SCREEN EXCLUDE.
          SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab
If one of these tables is active in the report (i.e. it is declared under TABLES or lies somewhere on the path from the root of the database hierarchy to a table declared with TABLES ), a pushbutton called 'Dynamic selections' appears on the selection screen.

Problem in AT selection screen validation

Hi,
I am having problem in AT SELECTION SCREEN Validation.
I have 2 radiobutton and 6 parameter. if i click first radio button all the 6 radiobutton should enable and take the user input, that is working fine for me.
if i click second radiobutton , out of 6 , 3 parameter should disable and remaining 3 should enable. thats also working fine.
My problem is program has written the validation for this 3 parameter in the AT SELECTION SCREEN.
For first radioutton all the validation working fine, for second validation as soon as i press the radiobutton it will display error message. Based on 2 parameter user is filling value for 3 rd parameter.
I want the same validation to be done for second radio button after user pressing enter.
PARAMETER: p_single RADIOBUTTON GROUP rad1 DEFAULT 'X' USER-COMMAND f1,
           p_multi RADIOBUTTON GROUP rad1.
PARAMETERS: s_pwwrk LIKE plaf-pwwrk.
PARAMETERS: p_lgort LIKE plaf-lgort.
PARAMETERS: p_kostl LIKE cobl-kostl.
here is my code:
AT SELECTION SCREEN.
CLEAR t001w.
CLEAR t001k.
CLEAR marv.
SELECT SINGLE * FROM t001w WHERE werks EQ s_pwwrk.
IF sy-subrc NE 0.
    MESSAGE e999 WITH 'Plant' s_pwwrk 'does not exist'.
ELSE.
    SELECT SINGLE * FROM t001k WHERE bwkey EQ t001w-bwkey.
    SELECT SINGLE * FROM marv WHERE bukrs EQ t001k-bukrs.
    IF p_budat0(4) NE marv-lfgja OR p_budat4(2) NE marv-lfmon
IF marv-xruem IS NOT INITIAL.
        IF p_budat0(4) NE marv-vmgja OR p_budat4(2) NE marv-vmmon.
MESSAGE e999 WITH p_budat4(2) p_budat0(4)
                            'is closed.
                                        Please try again.'.
        ENDIF.
      ELSE.
        MESSAGE e999 WITH p_budat4(2) p_budat0(4)
                          'is closed.
                                      Please try again.'.
      ENDIF.
    ENDIF.
ENDIF.

For your Case ,
If i understand clearly,You can do the validation when you want on AT SELECTION SCREEN ON WP_FIELD.
If you say your validation to be done only for Selection of Second Radio Button, then..
AT SELECTION SCREEN.
if p_multi eq 'X'. "<- Make Validation to be done only if user select Second Button
CLEAR t001w.
CLEAR t001k.
CLEAR marv.
SELECT SINGLE * FROM t001w WHERE werks EQ s_pwwrk.
IF sy-subrc NE 0.
MESSAGE e999 WITH 'Plant' s_pwwrk 'does not exist'.
ELSE.
SELECT SINGLE * FROM t001k WHERE bwkey EQ t001w-bwkey.
SELECT SINGLE * FROM marv WHERE bukrs EQ t001k-bukrs.
IF p_budat+0(4) NE marv-lfgja OR p_budat+4(2) NE marv-lfmon
IF marv-xruem IS NOT INITIAL.
IF p_budat+0(4) NE marv-vmgja OR p_budat+4(2) NE marv-vmmon.
MESSAGE e999 WITH p_budat+4(2) p_budat+0(4)
'is closed.
Please try again.'.
ENDIF.
ELSE.
MESSAGE e999 WITH p_budat+4(2) p_budat+0(4)
'is closed.
Please try again.'.
ENDIF.
ENDIF.
ENDIF.
endif.

Need to disable one of the select-options in dynamic selection screen

Hi,
we have copied the Standard program: RFDOPR00 into Z, my requirement is to disable one of the select-options in dynamic selection screen for ex: Reason code(User shouldnot able to enter anything in it).
Can anyone please tell me the procedure to do it... I had tried using at selection-screen but it doesnt work as it in 'LOOP AT SCREEN', i am not able to capture the Parameter name(screen-name).
Thanks,
Ravi

Hi,
Get inside your selection screen, by executing your program.
Now type /h in the field where you enter transaction code and press enter.
Now again press enter, this will take you debugger starting from your Selection screen.
You might be knowing this, still if you are not aware of this, this might be a valuable tip.
From here , you can trace your Parameter name.

Problem in dynamic selection screen

Similar Messages

Maybe you are looking for