Problem in ECC 5.0 Installation

Hi Gurus,
please anyone can suggest wheather m gone right procedure for SAP ECC & SOL installation,
1st i have install SOL & generate Key from it,
In SOL config,
CI = SOL
Inst # = 00
DB = KKK
SOL GET installed successfully & i have generated KEY also.
IN ECC installation
CI = ECC
Inst # = 05
DB = KKK
over here its shown error at database load of SAPSSEXEC.LOG & installation get failed,
and after that when i try to run SOL its shown all table status Ended instead of wait,
can u plz. help me out at where m wronge,
Thanks,
kaush

Hi guys,
You can get the installation guides from http://service.sap.com/instguides. they are very large so they don't get posted on SDN, just the SAP Service Marketplace.
However, you do need a SAP service marketplace user-id to access this. You will be able to get a user-id if you have a valid license - you can call the SAP help desk to get your first user-id created.
Cheers,
Mike.

Similar Messages

Problems in ECC 5.0 installation?

Hi,
I have sucessfully installed ECC 5.0. But whenever I execute OAM1 transcation, no Storage Queues are displayed but "MISSING" is displayed. As this is new installation the No of Storage Queues shpuld be 0 but instead "MISSING" is displayed and when I try to click on Storage Queue button the error "Queue CARA does not exist" is displayed and the screen goes blank and I need to craete a new session.
Please provide the reason for such a behaviour and also the underlying error.
Thanks in advance.
Regards,
Manish

No explanation for the behaviour, ..
But the way to get rid of the error message...
OAM1, menu Customizing, Option 'Spoollosts', Create Queues...
Best,
Lieven

When I install itunes 10.5.3 i get a message " there is a problem encountered with your windows installer package ".... and i can't install it

When I install itunes 10.5.3 i get a message " there is a problem encountered with your windows installer package ".... and i can't install it

Have you completed all windows update including service Pack1? If not, please complete all the windows update then follow steps below to re-install all over.
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Dispatcher down in ecc 6.0 installation

Hi,
 I am doing ecc 6.0 installation on windows with oracle 10g database. Installation is stoped on start instance phase.
In mmc dispatcher is down, messagenger and igs is up.
R3trans -d is 0. oracle is up.
sapinst_dev log:
TRACE [iaxxejsexp.cpp:199]
 EJS_Installer::writeTraceToLogBook()
Starting OS1/DVEBMGS00 [ABAP: UNKNOWN]. Elapsed time: 6:00 minutes...
TRACE [iaxxcnclhd.cpp:83]
 doHandleDoc()
ACTION_CANCEL requested
TRACE [iaxxcnclhd.cpp:719]
 doHandleDoc()
<html><head></head><body> You are about to cancel the SAP ERP 2005 Support Release 2 > SAP Systems > Oracle > Central System > Central System Installation installation.<li>Choose one of the following:</li><ul> <li>Continue - to continue the installation.</li> <li>Stop - to stop the installation and exit SAPinst. You can continue the installation later from this point.</li></ul>Notes:<ul> <li> If you stop the installation after the installation activities had started, do not use the SAP ERP 2005 Support Release 2 > SAP Systems > Oracle > Central System > Central System Installation, as it is not ready to be used.</li></ul></body></html>
TRACE [iaxxcnclhd.cpp:157]
 doHandleDoc()
ACTION_STOP requested
INFO 2008-09-13 18:04:31 [synxcpath.cpp:776]
 CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\__instana_tmp.xml.
WARNING 2008-09-13 18:04:53 [iaxxcnclhd.cpp:36]
 doHandleDoc()
SAPinst terminated by SIGINT (Ctrl+C)
dev_rfc log:
>TS> Sat Sep 13 18:32:28 2008
T:2796 Error in program 'igsmux': ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.sid, GWHOST=hostname, GWSERV=3300
LOCATION CPIC (TCP/IP) on local host
ERROR partner '192.168.9.10:3300' not reached
TIME Sat Sep 13 18:32:28 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2764
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
i entered the values in hosts and in services sapgw values are there.
Pls help out.
Rgs,
Venkat

Hello. Try to check dev_w0 and dev_server0 (if you use JAVA to). The JRE version are? Regards.

Ecc 5.0 installation

hi all,
while intalling ECC 5.0 i got below error
an error occured during the installation of component sap ERP 2004>sap ECC 5.0 abap system>unicode>install a database instance.press the log view button to get extended error information or press ok to terminate the installation.log files are written to SAP ERP 2004>SAP ECC 5.0 abap system >unicode>install a database instance.
please any body can help me.

Please check the link below:
http://www.sap-img.com/basis/sap-installation-procedure-on-win-2k-adv-server.htm
Here are the link which will explain the procedure
http://www.sap-img.com/basis/sap-ides-installation-procedure-for-sap-install-on-w2k-server.htm
http://www.sap-img.com/basis/sap-installation-procedure-on-win-2k-adv-server.htm
https://forums.sdn.sap.com/click.jspa?searchID=7220396&messageID=720429
ECC Nw 2004 installation document
Regards.

ECC 6.0 installation on external HD

I have a dual boot laptop with XP and Win 2003 server. I have a 1 TB external HD connected to the laptop, on which i want to install ECC 6 and BI 7.0. I have installed Oracle and JDK as per requirement.But when SAP ECC 6.0 installation starts it doesn't show me installation drive option for my external drive (H:). Only options are C: and D: what should i do ?

Hi
Mycomputer>right click manage>DiskManagement-->were you able to see your external harddisk
drive there ? if yes then right on that drive-->change drive letter and path then add the drive letter
to that i will work
Regards
Uday

Problem with SAPSERVER.CMD during installation, nothing happens

In the process of installing in our test environment but I seem to have problems with the Oracle 9i installation. When i double click the file sapserver.cmd nothing happens.
I have tried the workaround with renaming "symcjit.dll" and changing parameter JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m in oraparam.ini file. Then rerun installation with command "install\win32\setup.exe -J-Dsun.java2d.noddraw=true".
This time error message "Could not initialize the Java virtual machine. Program will exit!" occurred.
Can anyone please help me how to fix the problem. Thanks.

I am also facing same problem--
I have got IDES 4.7 CDs..
I am trying to install Oracle RDBMS 9.2 NT thru first CD... when I am running SAPSERVER.CMD it does nothing except showing wait pointer for few seconds.
it is actually creating three folders in TEMP folder images, jre, oui
I have tried running SAPSERVER.CMD from command prompt also but there was no luck.
When I tried to run SETUP.EXE there was same situation.
Even i tried to run setup.exe from \NT\I386 directory on command prompt with following command ...
SETUP.EXE -RESPONSEFILE E:\NT\I386\response\sapserver.rsp
but nothing could help me out...
I checked everywhere but could not find and LOG file which could explain me that what went wrong..
this is an appeal to all are techies.. plz help me..
I have tried it on two machines:
1) p4 2.66 512 ram 80+40 gb HDD 2000 server with sp4 and ie6, JRE, .NET framework 2.0
2) Dual core with 1 gb RAM 300 GB HDD 2003 Server with SP2 JRE, .NET framework 2.0
There was exactly same situation on both the machines..
Thank in advance

What are the ECC 6.0 installation steps?

Hi,
what are the ECC 6.0 installation steps?
pre
installation
post

Hi,
Find the installation guide at
service.sap.com/instguides > SAP Business solution > ERP6.0
It will cover every part of installation.
Regards,
Debasis.

Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?

This has been fixed. Answer is that I needed to go to "Apple Software Update" and repair it. (From my Control Panel).

I need ECC 6.0 installation steps with screenshots

please send me the ECC 6.0 installation guide.I need ECC 6.0 installation steps with screenshots. my mail id is <removed by moderator>.thanks in advance.

need SAP CRM 4.0 installation guide with screenshots.
Markus

I tried to upgrade from cs6 to cc, some programs have been successfully upgraded but some not. Problem with PS. Here is the problem: FATAL: Payload 'Camera Profiles Installer 9.0.0.6 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_d

Hello, I'v been using Adobe creative suite for a real long time and this week end I upgraded to CC. Most of the applications have been installed. Unfortunately I'm not able to install Photoshop and After Effect. Here is the problem:
FATAL: Payload 'Camera Profiles Installer 9.0.0.6 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db
Anyone has a solution for me?

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

Problems with WAS 6.40 Installation on Oracle - Phase 11 of 34

Hello,
Problems with WAS 6.40 Installation on Oracle (Phase 11 of 34)
with the installation of the Web Application server 6,40 SR1 on a Oracle server I get in phase 11 of 34 (Create Oracle Database) the following error-message:
CJS-00084 - SQL statement or script failed. Diagnosis: Error message: ORA-12547: TNS:lost contact.
error while loading shared library: libodm9.so : cannot open shared object file: No such file or dirctory.
Best Reagrds,
Ralf Steffens

hi Ralf
i've found one composite note for Oracle <a href="https://websmp203.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700001366932002">505630</a>
hope this solves...
Symptom
ORA-12547: TNS:lost contact
Brbackup, brarchive, brrestore or brconnect may terminate with errors similar to the following:
BR301E SQL error -12547 at location BrDbConnect-1
BR301E SQL error -12547 at location dbf_info_get-1
Sapdba returns the following error, for example:
SAPDBA: ORACLE error -12547 occurred while checking instance status!
The R/3 work processes or R3trans return the following error at Connect:
C *** ERROR => CONNECT failed with sql error '12547'
Other terms
TNS-12547, TNS-00517
Reason and Prerequisites
As part of the Net8 Connect, a program such as the R/3 kernel, R3trans, svrmgrl, sqlplus or ODMA establishes a connection to the Oracle database. If the connection terminates due to problems at the server end, it can result in ORA-12547.
Additional information for the error is often available in sqlnet.log. In many cases, other messages that are not reported by all tools precede ORA-12547. If ORA-12547 occurs when the ODMA accesses the old Oracle-Home during a database upgrade, for example, it may make sense to temporarily restart ORACLE_HOME on the old Oracle-Home for test purposes and then to execute sqlplus or svrmgrl.
Even if sapdba or the BR tools terminate with an ORA-12547 when calling sqlplus or svrmgrl recursively, you should, for test purposes, call sqlplus or svrmgrl manually with the operating system user that was used.
Hopefully, a more informative error message will appear in addition to ORA-12547, for example:
ld.so.1: oracleC11: fatal: relocation error: file
 /oracle/C11/817_64/libx8.so: symbol ksunsga_:
 referenced symbol not found
If you find accompanying error messages of this type, start a note search with the corresponding search terms since we are often aware of the problem and a solution may already be available. If you do not find any significant error messages or a suitable note, check the following possible causes for ORA-12547:
1. UNIX: Incorrectly linked Oracle tools
2. UNIX: Problems with XPG4 compliance and s-bit
3. Too many requests to the listener at the same time
4. HP-UX, Oracle 8.1: Missing OS patch
5. Use of CRYPTO parameters in sqlnet.ora
6. AIX: I/O Async is deactivated
7. Resource problems
8. The CONNECT_TIMEOUT_LISTENER parameter in listener.ora is too low
9. Activated Oracle trace
10. UNIX: Incorrect oracle executable authorization
11. SOLARIS: LD_LIBRARY_PATH set when you call ODMA
12. AIX: Problem with post/wait kernel enhancement
13. UNIX: Problems with the libobk library
14. SOLARIS: Incorrect search sequence in the path variable
15. UNIX: Conflicts between 32-bit and 64-bit files
Solution
1. Relink the Oracle software as ora<sid> with
cd $ORACLE_HOME/rdbms/lib
make -f ins_rdbms.mk install
 or
relink all
1. See Note 88884.
2. If individual work processes terminate with ORA-12547 when you start an R/3 instance, See Note 131561.
3. See Note 399610.
4. You can set security parameters that begin with SQLNET.CRYPTO_ in sqlnet.ora as part of the Advanced Security Option. Oracle releases < 8.1.7 cannot process these parameters correctly and result in ORA-12547. In this case, delete these types of parameters from sqlnet.ora.
5. If I/O is deactivated on AIX Async, the Net8 Connect fails with ORA-12547. In this case, activate I/O Async by using smitty.
6. Insufficient resources such as available memory on the database server can cause ORA-12547. For more information, see 384839.
7. In individual cases, it may make sense to increase the CONNECT_TIMEOUT_LISTENER parameter in listener.ora (for example, by 5 seconds, so from 10 to 15). Although a value of 10 seconds should usually be sufficient to establish a connection.
8. Delete the log files written by the Oracle trace in accordance with Note 92537.
9. Check to see whether the executable in $ORACLE_HOME/bin has the "rwsr-s--x" authorizations and the ora<sid> owner and correct this if necessary.
10. If you call ODMA on SOLARIS as part of a database upgrade and if LD_LIBRARY_PATH is set explicitly (on the lib directory of the target release), calling the old Oracle software through ODMA may fail with ORA-12547. If you use the old ORACLE_HOME to list sqlplus or svrmgrl, you get the following error:
ld.so.1: oracle<sid>: fatal: relocation error:
 file /oracle/<sid>/817_64/libx8.so: symbol ksunsga_:
 referenced symbol not found
ORA-12547: TNS:lost contact
 In this case, permanently delete LD_LIBRARY_PATH from the environment. This does not have any negative effects since the libraries are automatically found in the correct directories as of Oracle 8.1.
 If problems occur with the post/wait extension on AIX, the following type of errors will be displayed:
exec(): 0509-036 Cannot load program oracleC11 because of the
following errors:
 0509-130 Symbol resolution failed for oracle because:
 0509-136 Symbol pw_post (number 2524) is not exported
 from dependent module /unix.
 0509-136 Symbol pw_wait (number 2525) is not exported
 from dependent module /unix.
 0509-136 Symbol pw_config (number 2526) is not exported
 from dependent module /unix.
 0509-192 Examine .loader section symbols with the
 'dump -Tv' command.
ORA-12547: TNS:lost contact
1. If the libobk library was created incorrectly, the following type of errors may occur:
/oracle/C11/817_64/bin/oracle: /sbin/loader:
 Fatal Error: Cannot map library libobk.so
/usr/lib/pa20_64/dld.sl: Unable to find library
 '/oracle/C11/lib64/libobk.sl
exec(): 0509-036 Cannot load program oracleC11 because of the
 following errors:
0509-150 Dependent module /oracle/C11/817_64/lib/libobk.a(shr.o)
 could not be loaded.
0509-152 Member shr.o is not found in archive
ORA-12547: TNS:lost contact
 Check to see whether libobk exists and, if it is a link, that it points to a valid object. Note 142635 contains more information about this. The libobk link may point to this if a libsbtsh8.* file exists in the Oracle library directory. If you are using a third-party Backint tool, contact the relevant supplier, since libobk often has to point to a backint-specific library.
1. If an error such as
ld.so.1: ./svrmgrl: fatal: libucb.so.1: open failed:
 No such file or directory
ORA-12547: TNS:lost contact
 occurs, the PATH has probably been set incorrectly. For more information, see Note 44361.
1. If an error such as
ld.so.1: oracle<sid>: fatal: <library> wrong ELF class: ELFCLASS64
ORA-12547: TNS:lost contact
 concerning "wrong ELF class" occurs, check whether the <library> mistakenly has a different bit size than the tool that was called. You can determine this using
file <library>
file <tool>
 All the files involved must uniformly be either 32-bit or 64-bit.

Regards
Arunkumar

SAP IDES ECC 6.0 Installation Problems

Hello SAP-Experts! 
 
I'm installting an SAP System for the first time and have some problems now.
 
The System I want to install is an IDES mySAP ERP 2005 /ECC 6.0 on MS SQL 2005 Database. (Based on AS ABAP)
I have problems with the database instance. In the 14 of 16 Phase the ABAP import fails in the 6 import job. 
 
The logs extracts are showing the following: 
 
import_monitor.java.log: 
 
Loading of 'SAPAPPL1_10' import package: OK 
Import Monitor jobs: running 9, waiting 59, completed 4, failed 0, total 72. 
Import Monitor jobs: running 10, waiting 58, completed 4, failed 0, total 72. 
Loading of 'PCL2' import package: OK 
Import Monitor jobs: running 9, waiting 58, completed 5, failed 0, total 72. 
Import Monitor jobs: running 10, waiting 57, completed 5, failed 0, total 72. 
Loading of 'SAPCLUST' import package: ERROR 
Import Monitor jobs: running 9, waiting 57, completed 5, failed 1, total 72. 
Import Monitor jobs: running 10, waiting 56, completed 5, failed 1, total 72. 
Loading of 'SAPSDIC_2' import package: OK 
Import Monitor jobs: running 9, waiting 56, completed 6, failed 1, total 72. 
Import Monitor jobs: running 10, waiting 55, completed 6, failed 1, total 72. 
Loading of 'SAPSDIC_3' import package: OK 
Import Monitor jobs: running 9, waiting 55, completed 7, failed 1, total 72. 
Import Monitor jobs: running 10, waiting 54, completed 7, failed 1, total 72. 
..... 
 
SAPCLUST.LOG: 
 
(DB) INFO: REGUC created 
(DB) INFO: REGUC~0 created 
(IMP) INFO: import of REGUC completed (146737 rows) #20070206184732 
(DB) INFO: RFBLG created 
(DB) INFO: RFBLG~0 created 
myCluster (63.15.Imp): 1595: inconsistent settings for table position validity detected. 
myCluster (63.15.Imp): 1598: nametab says table positions are not valid. 
myCluster (63.15.Imp): 1601: alternate nametab says table positions are valid. 
myCluster (63.15.Imp): 1605: for field 305 of alternate nametab displacement is 3134, yet dbtabpos shows 3244. 
myCluster (63.15.Imp): 1608: character length is 2 (in) resp. 1 (out). 
myCluster (63.15.Imp): 1255: unable to retrieve nametab info for logic table BSEG . 
myCluster (63.15.Imp): 8300: unable to acquire nametab info for logic table BSEG . 
myCluster (63.15.Imp): 2900: failed to convert cluster data of cluster item. 
myCluster: RFBLG *800**0001**0100000000**1995* 
myCluster (63.15.Imp): 320: error during conversion of cluster item. 
myCluster (63.15.Imp): 323: affected physical table is RFBLG. 
(CNV) ERROR: code page conversion failed 
 
 rc = 2 
 
 
.--============--
RSCP - Error
`----
 
(DB) INFO: RFMHN created 
 
(DB) INFO: RFMHN~0 created 
 
IMPORT_MONITOR.LOG: 
 
ERROR: 2007-02-06 18:49:44 com.sap.inst.migmon.LoadTask run 
 
Loading of 'SAPCLUST' import package is interrupted with R3load error. 
 
Process '
vsids\sapmnt\IDS\SYS\exe\nuc\NTI386\R3load.exe -i SAPCLUST.cmd -dbcodepage 1100 -l SAPCLUST.log -loadprocedure fast' exited with return code -1,073,741,819. 
 
For mode details see 'SAPCLUST.log' file. 
 
Standard error output: 
 
sapparam: sapargv( argc, argv) has not been called. 
 
sapparam(1c): No Profile used. 
 
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline 
 
SAPINST.LOG: 
 
WARNING 2007-02-06 17:28:23 
 
Errors when executing sql command: p nr="0" If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support 
 
What can I do now? What is the problem here? 
Hope you can help here. 
 
Regards, 
Lukas 

Hello
I would recommend you uninstall SAP and SQL, then reinstall SQL using the SAP provided script. This will ensure your codepage is set correctly.
I would also recommend you install this system as a Unicode system.
Thanks
N.P.C

Problem in SAP system after ECC 6.0 installation

Hi SAP Gurus,
I have been installing ECC 6.0 with database as ORACLE on Sun Solaris SPARC 64-bit.
I m currently stuck at the phase 27,when the SAP instance is started.
My SAP system is not coming up.
I have checked all profiles with sappfpar pf=<profile> check and none of them are giving errors.they are giving only warnings.
I am hereby pasting the dev_ms,dev_disp & dev_w0 files:
dev_ms:
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Wed Oct 22 14:28:09 2008
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 19059
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 19059) [msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 18
[Thr 1] load acl file = /usr/sap/DBM/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1] 1 : [10.48.152.173] gmsc2 (HOSTNAME)
[Thr 1] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 1] MsHttpInit: full qualified hostname = gmsc2.in.capgemini.com
[Thr 1] HTTP logging is switch off
[Thr 1] set HTTP state to LISTEN
[Thr 1] MsHttpOwnDomain: own domain[1] = in.capgemini.com
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsDBM (3600) ***
[Thr 1] *** I listen to internal port 3900 (3900) ***
[Thr 1] *** HTTP port 8100 state LISTEN ***
[Thr 1] CUSTOMER KEY: >T1454016479<
[Thr 1] Wed Oct 22 14:28:49 2008
[Thr 1] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from gmsc2_DBM_00 [msxxserv_mt. 4669]
[Thr 1] Wed Oct 22 14:39:02 2008
[Thr 1] *** ERROR => MsSCheckConnections: no response from client C1 (127.0.0.1) after 300 secs received [msxxserv_mt. 3158]
[Thr 1] *** ERROR => MsSCheckConnections: disconnect now [127.0.0.1] [msxxserv_mt. 3162]
dev_disp:
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno 00
sid DBM
systemid 370 (Solaris on SPARCV9 CPU)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: single threaded, Unicode, 64 bit, optimized
pid 19060
Wed Oct 22 14:28:11 2008
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 19060) [dpxxdisp.c 1239]
 shared lib "dw_xml.so" version 111 successfully loaded
 shared lib "dw_xtc.so" version 111 successfully loaded
 shared lib "dw_stl.so" version 111 successfully loaded
 shared lib "dw_gui.so" version 111 successfully loaded
 shared lib "dw_mdm.so" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gmsc2_DBM_00 <
DpShMCreate: sizeof(wp_adm) 19344 (1488)
DpShMCreate: sizeof(tm_adm) 5710008 (28408)
DpShMCreate: sizeof(wp_ca_adm) 31200 (104)
DpShMCreate: sizeof(appc_ca_adm) 10400 (104)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm) 548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (2080)
DpShMCreate: sizeof(wall_adm) (40056/36728/88/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0xffffffff6e400000, size: 6404896)
DpShMCreate: allocated sys_adm at 0xffffffff6e400000
DpShMCreate: allocated wp_adm at 0xffffffff6e402218
DpShMCreate: allocated tm_adm_list at 0xffffffff6e406da8
DpShMCreate: allocated tm_adm at 0xffffffff6e406e08
DpShMCreate: allocated wp_ca_adm at 0xffffffff6e978ec0
DpShMCreate: allocated appc_ca_adm at 0xffffffff6e9808a0
DpShMCreate: allocated comm_adm at 0xffffffff6e983140
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0xffffffff6ea08e20
DpShMCreate: allocated gw_adm at 0xffffffff6ea08ea0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0xffffffff6ea08ed0
DpShMCreate: allocated wall_adm at 0xffffffff6ea08ed8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)EsStdUnamFileMapInit: ES base = 0x0xfffffffe60000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
Wed Oct 22 14:28:13 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( gmsc2) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >gmsc2_DBM_00 <)
DpStartStopMsg: start msg sent
Wed Oct 22 14:28:14 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Wed Oct 22 14:28:21 2008
ERROR => W0 (pid 19071) died [dpxxdisp.c 14441]
ERROR => W2 (pid 19073) died [dpxxdisp.c 14441]
ERROR => W3 (pid 19074) died [dpxxdisp.c 14441]
ERROR => W4 (pid 19075) died [dpxxdisp.c 14441]
ERROR => W5 (pid 19076) died [dpxxdisp.c 14441]
ERROR => W7 (pid 19078) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbf --> 0xbb
ERROR => W8 (pid 19079) died [dpxxdisp.c 14441]
ERROR => W1 (pid 19072) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xbb --> 0xba
ERROR => W6 (pid 19077) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xba --> 0xb8
ERROR => W9 (pid 19080) died [dpxxdisp.c 14441]
ERROR => W10 (pid 19082) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 19085) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 19087) died [dpxxdisp.c 14441]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=14
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Oct 22 14:28:31 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Oct 22 08:58:31 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 19071 Ended no 1 0 0
1 DIA 19072 Ended no 1 0 0
2 DIA 19073 Ended no 1 0 0
3 DIA 19074 Ended no 1 0 0
4 DIA 19075 Ended no 1 0 0
5 DIA 19076 Ended no 1 0 0
6 UPD 19077 Ended no 1 0 0
7 ENQ 19078 Ended no 1 0 0
8 BTC 19079 Ended no 1 0 0
9 BTC 19080 Ended no 1 0 0
10 BTC 19082 Ended no 1 0 0
11 SPO 19085 Ended no 1 0 0
12 UP2 19087 Ended no 1 0 0
Dispatcher Queue Statistics Wed Oct 22 08:58:31 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
2
2
2000
4
2
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
this is only a part of dev_disp file.
dev_w0:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid DBM
M systemid 370 (Solaris on SPARCV9 CPU)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 19071
M
M
M Wed Oct 22 14:28:12 2008
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 19071) [thxxhead.c 1267]
M ThInit: running on host gmsc2
M calling db_connect ...
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@DBM on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x106ab1350 0x106ab8e10 0x106ac95a8
C Attaching to DB Server DBM (con_hdl=0,svchp=0x106ac94d8,srvhp=0x106acb828)
C
C Wed Oct 22 14:28:13 2008
C Starting user session (con_hdl=0,svchp=0x106ac94d8,srvhp=0x106acb828,usrhp=0x106ab9628)
C Now '/@DBM' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=0x106ac94d8,usrhp=0x106ab9628)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@DBM on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0x106ab1350 0x106ab8e10 0x106ac95a8
C Starting user session (con_hdl=0,svchp=0x106ac94d8,srvhp=0x106acb828,usrhp=0x106ab9628)
C
C Wed Oct 22 14:28:14 2008
C Now 'SAPSR3/<pwd>@DBM' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance DBM is running on gmsc2 with ORACLE version 10.2.0.2.0 since OCT 21, 2008, 06:23:58
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081022 142812 gmsc2
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,
.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0xffffffff7397a000, size: 4400000)
M SHM_ROLL_AREA (addr: 0xfffffffe56000000, size: 134217728)
M SHM_PAGING_AREA (addr: 0xfffffffe50000000, size: 67108864)
M SHM_ROLL_ADM (addr: 0xffffffff73db0000, size: 2672386)
M SHM_PAGING_ADM (addr: 0xffffffff77c00000, size: 656416)
M ThCreateNoBuffer allocated 572152 bytes for 1000 entries at 0xfffffffe48004000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0xffffffff77e00000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)ES initialized.
B
B Wed Oct 22 14:28:15 2008
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
I
I Wed Oct 22 14:28:17 2008
I *** ERROR => shmget(10019,29999888,2016) (22: Invalid argument) [shmux.c 1556]
B dbtbxbuf: Shm Segment 19: Cannot attach
B ***LOG BBB=> ADM message TBX buffer: function shmcreate0 returns RC = 256 [dbtbxbuf#2 @ 16094] [dbtbxbuf1609 4]
B ***LOG BZL=> internal error in table buffer: table buf init fail [dbtbxbuf#2 @ 1701] [dbtbxbuf1701 ]
B dbtbxbuf: return code (sap_rc): 2, Buffer TBX_GENERIC will not be available
B db_tblinit failed
M *** ERROR => ThCallHooks: event handler db_init for event CREATE_SHM failed [thxxtool3.c 260]
M *** ERROR => ThIPCInit: hook failed [thxxhead.c 2067]
M ***LOG R19=> ThInit, ThIPCInit ( TSKH-IPC-000001) [thxxhead.c 1509]
M in_ThErrHandle: 1
M *** ERROR => ThInit: ThIPCInit (step 1, th_errno 17, action 3, level 1) [thxxhead.c 10283]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 19071) [dpuxtool.c 260]
Quick help would be appreciated since installation it held up.
Regards,
Santosh Bhat

Hi,
I am finding following error in your log:
MsSClientHandle: no server provides service ENQ (4), requested from gmsc2_DBM_00 http://msxxserv_mt. 4669
UPD 0 0 2000 0 0
--------++++--
+
ENQ 0 0 2000 0 0
--------++++--
+
BTC 0 0 2000 0 0
--------++++--
+
SPO 0 0 2000 0 0
--------++++--
+
UP2 0 0 2000 0 0
Please assign no. of work processes to at least 1 for above mentioned type of work process.

ECC 6.0 installation problem

Hi all
I cannot install the ECC when I install the process in define Parameters
Software Packages \ Package Location \
it prompt error.
"You Entered: E:\EXP1
Found the Label SAP:NETWEAVER:2004sSR2:EXPORT(1/3): SAP Netweaver 2004s SR2 Installation Export CD 1/3:CDxxxxxxxxxxxxx but need the label SAP:ECC:600SR2:EXPORT(1/11)..
But I cannot found the CD label name as "SAP:ECC:600SR2:EXPORT"
Pls help..tkx

As Sergo posted: the DVDS could only be send or provided by SAP!
The "normal" ways for download installation dvds would be either
1) http://service.sap.com/swdc
Installations and Upgrades-> SAP Application Components->SAP ERP-> SAP ERP 6.0-> Installation & Upgrade-> <your db-platform>
2) order dvd package via service.sap.com/swcat
As SR2 is neither downloadable via 1) and 2 ) you have to order them via customer-message. If SAP told you, the SW is in sapnet, you should ask where to find exactly.
Otherwise you could also think about installing with the newer SR3-package (but then you have to take only SR3 DVDS!!) instead of using the OLD version SR2.
Kind regards,
Uta
Edited by: Uta Hedemann on Jun 3, 2009 12:06 AM

Problem in ECC 5.0 Installation

Similar Messages

Maybe you are looking for